cancel
Showing results for 
Search instead for 
Did you mean: 
Reply

Approvals not sending Email

Hello,

         I have created a simple flow to require Approval when a new item is created in a sharepoint list. This issue i am having is that when a new item is created in the SP List an approval email is not being sent. I see that pending approval under the Approvals link in Flow, but no email comes through regarding the approval. 

I checked with our IT support regarding the missing emails and was responded with 

" I was able to do a message trace and it doesn’t look like any emails were sent to you from this email address.  Other agencies are receiving these emails (with details if undeliverable).   "

So as far as i can tell Flow isnt sending the emails out. 

Does anyone know if there is a setting or option that needs to be turned on in flow or something to allow these emails to be sent through. 

 

Thanks

 

1 ACCEPTED SOLUTION

Accepted Solutions

So with no information our approval emails are now being received. No changes were made on our end and the flows stayed the same.

I believe that whatever fixed the issue was done by our Tenant Administrators, but unfortunately we wont know what they changed or fixed. 

View solution in original post

20 REPLIES 20
Pstork1
Most Valuable Professional
Most Valuable Professional

There is a setting that will prevent emails from being sent if turned off.  In your Approval under advanced settings make sure that Enable Notifications is set to Yes. If it is set to No then the Approval will only be sent to the panel and no email copy will be sent.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

Thanks for your response. 

 

I checked this setting and can see that it is set to Enable Notifications

Capture1.PNG

A couple other things to try

 

1) Check in the Flow Runs and make sure that the settings used in the action are accurate. (For example that the approvers are a semicolon delimited string and not a comma delimited string.)

2) Check your Spam filter and your Junk folder in your mailbox.  I've seen these approvals get sent to junk if the address isn't whitelisted.

3) Temporarily add a Send Email action just in front of the Approval action which is also set to your email.  See if that email comes through.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

Hi @Pstork1 

 

1) Ive checked the flow actions in the Approvals action and dont see anything wrong. Heres a screen shot

Capture2.PNG

 

2) Ive checked the spam filter in Outlook and it is set to No Automatic Filtering. I also added maccount@microsoft.com to the Safe Recipients and Safe Senders List. From the tests i have run no emails for the approvals has gone into the spam / junk folder.

 

3) I added the send an email (V2) just before the Approval. When running the tests i do recieve those emails, but still no Approval emails.

 

As an added few tests, i changed the approval email address to my personal email, but that failed as it requires a user within the organization. I also changed the approval type from "Approve/Reject - First to respond" to "Approve/Reject - Everyone must approve" but that didnt make any difference. 

Additionally i changed the approval type out for the Custom Responses aswell as deleting and readding the original approval action and approval type. All had no effect. 

I think i did forget to mention that the approvals do show up under the Approvals link in flow, and i am able to approve and reject from there.

It looks from the screenshot like you are just typing in the approver's email.  When you do that it should show a typical People Picker dropdown.  You should pick the email from there.  What will show in the blank is the display name for the user rather than the email address.  That may be interferring with it send out the actual email



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.


@Pstork1 wrote:

It looks from the screenshot like you are just typing in the approver's email.  When you do that it should show a typical People Picker dropdown.  You should pick the email from there.  What will show in the blank is the display name for the user rather than the email address.  That may be interferring with it send out the actual email


It appears that it does do as you mentioned when entering the users name, but changes on reloading the flow.

Capture4.PNG

When this is selected is shows the following

Capture5.PNG

Saving the flow and navigating away from the page and back then shows the following.

Capture6.PNG

Understood, just wanted to make sure it was entered correctly and it is.

 

I'm honestly not sure what is happening in your environment.  We've checked about everything I can think of.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.


@Pstork1 wrote:

Understood, just wanted to make sure it was entered correctly and it is.

 

I'm honestly not sure what is happening in your environment.  We've checked about everything I can think of.


Thanks for your suggestions and help. I am guessing it might be an admin setting or something. I will have to raise a ticket with our tenant administrators and see if they can look into it on there end. 

@stephenJames  You org may be geoblocking the emails. This happened to us! We were getting some approval emails but not all of them. we did a message trace and we could not find anything either. It was coming from a datacenter outside of the US and we were blocking it and that is why we were not getting them. You may have to contact Microsoft, they look at the logs and see where it is coming from and why you aren't getting it. Your org may need to whitellist certain IP ranges.


@KMac1980 wrote:

@stephenJames  You org may be geoblocking the emails. This happened to us! We were getting some approval emails but not all of them. we did a message trace and we could not find anything either. It was coming from a datacenter outside of the US and we were blocking it and that is why we were not getting them. You may have to contact Microsoft, they look at the logs and see where it is coming from and why you aren't getting it. Your org may need to whitellist certain IP ranges.


Thanks for the information @KMac1980 . We are currently working with our tenant administrator to determine the cause and hopefully a resolution. From the information we have gathered already, some agencies under our tenant are getting these approval emails without issue, whereas our agency isnt recieving any of them. 

 

Once i get some more information i will update this post just incase it helps someone else out.

So with no information our approval emails are now being received. No changes were made on our end and the flows stayed the same.

I believe that whatever fixed the issue was done by our Tenant Administrators, but unfortunately we wont know what they changed or fixed. 

juresti
Continued Contributor
Continued Contributor

I was just having this same issue where the approval was not sending me an email but it was sending it to other users.

 

The solution for me was to delete the connection, not the flow action, but the connection from my list.

 

Then I added the connection again and it started sending me emails.

 

Microsoft from time to time will make updates that break your flow steps or the connection themselves, or they just freeze, or encounter a bug.

This is all running in a microsoft OS computer after all, things have to get "reinstalled" or "reconfigured".

 

I would also try logging out and in and deleting the action and adding it back.

Sometimes it also seems to lock you in the session and not process any changes in the flows.

 

Thanks Juresti...your solution seem to be what solved this issue for me

Anonymous
Not applicable

I'm having the same problem; there was a MS update this week 2/2/2021 and my approval flow is not generating an email now. It was prior to the update. 

 

 

mijonnat
Regular Visitor

I'm also having the same problem. Removed and re-established the 'Approval' connector but it's still not working

Tdube94
New Member

Here in Australia as well not receiving approval emails. Have gone through all the troubleshooting mentioned above 

Pstork1
Most Valuable Professional
Most Valuable Professional

This is a relatively old thread.  If you are having issues with Approval emails definitely check all the suggestions here.  But also either start a new thread or open a support ticket with Microsoft.  Very few people will see your reply on this thread.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

Thanks @Pstork1 , your answer worked!

I'm having the same issue, the approval is in my received approvals in PowerAutomate.

I've added an email notification prior to and after the approval step.

I've deleted the approval connection and recreated it.

I've checked the mail trace in exchange and I don't see the email for the approval.  I DO see the email before and after the approval step, but still no approval email.

Smitsky34_0-1663593128144.png

Both accounts; the approval connection and the receiving account have an E3 license and Outlook.

This is the first FLOW I've created in this tenant.

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (2,682)