cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Mancino
Helper I
Helper I

Assigning a person to task based on email reply

Currently, I'm using a flow to monitor an inbox, when that inbox is emailed the flow runs and creates a task in Planner (this part works).

 

What I would like to see happen next is when someone responds to the Alias attached to the mailbox with Under Review, I'd like to update the task created in the beginning of the flow by assigning it to the person who responded.

 

Is this possible or will I have to create a second flow to monitor the Inbox and match the Task name?

1 ACCEPTED SOLUTION

Accepted Solutions

@Mancino 

For the two flows approach, did you tried to use conditional triggers?

https://powerusers.microsoft.com/t5/General-Power-Automate/Trigger-conditions-for-Flow-now-available... 

So your first flow (tha one that creates a task) will be executed under specific conditions to be executed (i.e. Body does not contain 'Got it!'... or sender is somebody outside of the AssignTo Team); while your second flow (the one that assigns the tesk) will be executed under different conditions (i.e. Body contains 'Got it!' and Subject contains 'Re:'... or sender is somebody belonging to the AssignTo Team)

 

Also, if you create the task based on the Request Email Subject (flow#1) adding Subject as part of new Task Name, and the first team member sends a Request to be assigned to the Task (flow #2) by replying to the original email, you can do the following:

1.- Take Request to be assigned email subject,remove 'Re:' and store the result inside a variable, let's call it 'TargetTaskSubject'

2.- list all tasks by means of this 'List tasks' action block

3.- filter the output by taking only the ones containing 'TargetTaskSubject' by means of Filter array action Block.

 

Flow_FilterTasks.png

Hope this helps

 

 

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

View solution in original post

14 REPLIES 14
efialttes
Community Champion
Community Champion

Hi!
Let'see if I understood the problem.
1. Is the mailbox: a shared mailbox, an office 365 group mailbox, other?
2. As soon as you receive an email in your Inbox, you convert it into a planner task. Are you applying any specific rule, i.e. only emails containing specific text on Subject? Do these emails that are converted into New Tasks contain a unique identifier?
3. Now, if somebody replies by adding a specific text in the Subject (Under review) you want to identify the employee sending the reply and Assign the task to him/her.

Did I understood properly?

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttesyes, essentially.

 

So, I have a flow right now that monitors a shared inbox, that shared inbox is also part of an alias (distro group of users).

 

Phase 1:

Email comes in with a request -> Message Posted in Teams -> Task Created in Planner with below Task Title  - This works.

Flow.png

Phase 2:

Member of team responds to original request with "Got this" for awareness -> Assign task created in Phase 1 to team member who responded.

 

I hope that makes sense, I attempted to do it all in one flow and was unsuccessful so I wondered if I could create another flow that will pull the subject out of the reply email and match it to a Planner task title however that says the condition isn't met when I try to match it up.

@Mancino 

I believe you can do it in just one flow, by adding a second trigger as a flow step. However, you will need to add a Subject condition to get this second trigger executed ONLY when someone replies to this same request, whih is gonna be tricky.

Can share an example screenshot of 'Got it' response?

 

Flow_nestedtriggers.png

 

Or, if you prefer to split it in two flows, the tricky part is to get all tasks, and filter them by Task Name, so you take the one that contains the target Subject. The point here is: if you compare the REply Subject 'as is' with the Task Name you are storing, it will always fail either because of the RE: or because of the 'Got it' (it shall be added into the Subject, right?) or because of both, so you will need to manipulate REply Subject before comparing it with your current Task Names.

AS with the first suggestion, can share an example screenshot of 'Got it' response?

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttes  - so currently I have the flow set up on a condition that if it starts with RE: perform the create task which I realize will be problematic if someone adds the alias to a response.

 

Example email comes in requesting assistance with billing. Subject: Need help with invoices.

 

The response email should be:

Subject: RE: Need help with invoices

Body: Got this

Person reviews and responds.

 

Overall flow is below. What I need now is to have the task that gets created off the initial email sent to be updated when someone says "Got this" or whatever set text we choose in the body.

OverallFlow.png

I need to make sure that all of the responses to the initial email (starting with RE:) do not trigger new tasks to be created which is where I'm stuck. If I go down the If yes path, I can't seem to link the created task under If no which is why I was thinking of doing a separate flow however as I mentioned above, I might need a way around starting with RE:.

 

Thoughts?

Hi again
In case you opt to implement two flows, please have a look to conditional triggers
https://powerusers.microsoft.com/t5/General-Power-Automate/Trigger-conditions-for-Flow-now-available...
Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

So the challenge I'm having with two flows is getting the task ID from the previous tasks made. I tried to match it to the subject as that's what the title of task is however it created an endless loop.

 

Is there a way to get the ID from matching the title then use that to identify which task to update? The condition triggers with subject/body are working, it's the update piece that's not correct.

@efialttesI attempted to add a second email trigger with a condition on the Body however I get the following:

New.png

@Mancino 

For the two flows approach, did you tried to use conditional triggers?

https://powerusers.microsoft.com/t5/General-Power-Automate/Trigger-conditions-for-Flow-now-available... 

So your first flow (tha one that creates a task) will be executed under specific conditions to be executed (i.e. Body does not contain 'Got it!'... or sender is somebody outside of the AssignTo Team); while your second flow (the one that assigns the tesk) will be executed under different conditions (i.e. Body contains 'Got it!' and Subject contains 'Re:'... or sender is somebody belonging to the AssignTo Team)

 

Also, if you create the task based on the Request Email Subject (flow#1) adding Subject as part of new Task Name, and the first team member sends a Request to be assigned to the Task (flow #2) by replying to the original email, you can do the following:

1.- Take Request to be assigned email subject,remove 'Re:' and store the result inside a variable, let's call it 'TargetTaskSubject'

2.- list all tasks by means of this 'List tasks' action block

3.- filter the output by taking only the ones containing 'TargetTaskSubject' by means of Filter array action Block.

 

Flow_FilterTasks.png

Hope this helps

 

 

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttesthat definitely helps! I think I'm almost there using a second flow, and was able to get around the conditional trigger.

 

However, the filter array tasks shows the title correct but the output is empty, which is why I'm assuming the task isn't updating (although I can't confirm as Planner seems to be down). Thoughts?

 

array.png

Hi
Can you show me the content of your variable on that same execution? And also the expression you are using in your Filter Array?
Thanx!

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttes 

 

Will do. So  I have the initialize and compose here, which is successful.

initializeandcompose.pngsuccess.png

I then have a condition to check the body, which comes back as true and sets the variable:

setvar.png

I then do a list tasks for Group ID/Plan ID which is successful in the test. from there I filter, I've tried with is equal to or contains and neither work

filter.png

However, the filter is returning nothing:

array.png

 

Here's the apply to each, which doesn't look like it gets called:

applytoeach.png

Hi

I think the reason for empty result is, the value given to the variable has a space at the beginning, but the name of your task does not have it.
You can add trim() function to your expression in order to remove it
https://docs.microsoft.com/es-es/azure/logic-apps/workflow-definition-language-functions-reference#t...

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttesyessir, that was it. I didn't account for the space, once I added the additional space after the : and tested, everything worked.

 

Everything is now working as expected with 2 flows. I've just run through and tested everything. Essentially, the filter array worked how it should have. Thank you so much for your help!

So everything is working however I'm attempting to combine the two flows. My goal is to check if the task exists, if it doesn't create if it does check the body.

 

Most of it is functioning however I have 2 issues:

 

1. It is doing a FOR-EACH loop and sending the messages/posting multiple times (number of each task already in planner).

2. It looks as though the variables aren't pulling down - for example SubjectTrimmed and DueDate will not work when I attempt to create the task.

 

@efialttes  any thoughts?

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.    👉Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS   Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!   Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!       Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!   UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!   European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!     Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!     For more events, click the image below to visit the Microsoft Community Days website.      

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Users online (5,200)