cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Mancino
Helper I
Helper I

Assigning a person to task based on email reply

Currently, I'm using a flow to monitor an inbox, when that inbox is emailed the flow runs and creates a task in Planner (this part works).

 

What I would like to see happen next is when someone responds to the Alias attached to the mailbox with Under Review, I'd like to update the task created in the beginning of the flow by assigning it to the person who responded.

 

Is this possible or will I have to create a second flow to monitor the Inbox and match the Task name?

1 ACCEPTED SOLUTION

Accepted Solutions

@Mancino 

For the two flows approach, did you tried to use conditional triggers?

https://powerusers.microsoft.com/t5/General-Power-Automate/Trigger-conditions-for-Flow-now-available... 

So your first flow (tha one that creates a task) will be executed under specific conditions to be executed (i.e. Body does not contain 'Got it!'... or sender is somebody outside of the AssignTo Team); while your second flow (the one that assigns the tesk) will be executed under different conditions (i.e. Body contains 'Got it!' and Subject contains 'Re:'... or sender is somebody belonging to the AssignTo Team)

 

Also, if you create the task based on the Request Email Subject (flow#1) adding Subject as part of new Task Name, and the first team member sends a Request to be assigned to the Task (flow #2) by replying to the original email, you can do the following:

1.- Take Request to be assigned email subject,remove 'Re:' and store the result inside a variable, let's call it 'TargetTaskSubject'

2.- list all tasks by means of this 'List tasks' action block

3.- filter the output by taking only the ones containing 'TargetTaskSubject' by means of Filter array action Block.

 

Flow_FilterTasks.png

Hope this helps

 

 

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

View solution in original post

14 REPLIES 14
efialttes
Community Champion
Community Champion

Hi!
Let'see if I understood the problem.
1. Is the mailbox: a shared mailbox, an office 365 group mailbox, other?
2. As soon as you receive an email in your Inbox, you convert it into a planner task. Are you applying any specific rule, i.e. only emails containing specific text on Subject? Do these emails that are converted into New Tasks contain a unique identifier?
3. Now, if somebody replies by adding a specific text in the Subject (Under review) you want to identify the employee sending the reply and Assign the task to him/her.

Did I understood properly?

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttesyes, essentially.

 

So, I have a flow right now that monitors a shared inbox, that shared inbox is also part of an alias (distro group of users).

 

Phase 1:

Email comes in with a request -> Message Posted in Teams -> Task Created in Planner with below Task Title  - This works.

Flow.png

Phase 2:

Member of team responds to original request with "Got this" for awareness -> Assign task created in Phase 1 to team member who responded.

 

I hope that makes sense, I attempted to do it all in one flow and was unsuccessful so I wondered if I could create another flow that will pull the subject out of the reply email and match it to a Planner task title however that says the condition isn't met when I try to match it up.

@Mancino 

I believe you can do it in just one flow, by adding a second trigger as a flow step. However, you will need to add a Subject condition to get this second trigger executed ONLY when someone replies to this same request, whih is gonna be tricky.

Can share an example screenshot of 'Got it' response?

 

Flow_nestedtriggers.png

 

Or, if you prefer to split it in two flows, the tricky part is to get all tasks, and filter them by Task Name, so you take the one that contains the target Subject. The point here is: if you compare the REply Subject 'as is' with the Task Name you are storing, it will always fail either because of the RE: or because of the 'Got it' (it shall be added into the Subject, right?) or because of both, so you will need to manipulate REply Subject before comparing it with your current Task Names.

AS with the first suggestion, can share an example screenshot of 'Got it' response?

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttes  - so currently I have the flow set up on a condition that if it starts with RE: perform the create task which I realize will be problematic if someone adds the alias to a response.

 

Example email comes in requesting assistance with billing. Subject: Need help with invoices.

 

The response email should be:

Subject: RE: Need help with invoices

Body: Got this

Person reviews and responds.

 

Overall flow is below. What I need now is to have the task that gets created off the initial email sent to be updated when someone says "Got this" or whatever set text we choose in the body.

OverallFlow.png

I need to make sure that all of the responses to the initial email (starting with RE:) do not trigger new tasks to be created which is where I'm stuck. If I go down the If yes path, I can't seem to link the created task under If no which is why I was thinking of doing a separate flow however as I mentioned above, I might need a way around starting with RE:.

 

Thoughts?

Hi again
In case you opt to implement two flows, please have a look to conditional triggers
https://powerusers.microsoft.com/t5/General-Power-Automate/Trigger-conditions-for-Flow-now-available...
Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

So the challenge I'm having with two flows is getting the task ID from the previous tasks made. I tried to match it to the subject as that's what the title of task is however it created an endless loop.

 

Is there a way to get the ID from matching the title then use that to identify which task to update? The condition triggers with subject/body are working, it's the update piece that's not correct.

@efialttesI attempted to add a second email trigger with a condition on the Body however I get the following:

New.png

@Mancino 

For the two flows approach, did you tried to use conditional triggers?

https://powerusers.microsoft.com/t5/General-Power-Automate/Trigger-conditions-for-Flow-now-available... 

So your first flow (tha one that creates a task) will be executed under specific conditions to be executed (i.e. Body does not contain 'Got it!'... or sender is somebody outside of the AssignTo Team); while your second flow (the one that assigns the tesk) will be executed under different conditions (i.e. Body contains 'Got it!' and Subject contains 'Re:'... or sender is somebody belonging to the AssignTo Team)

 

Also, if you create the task based on the Request Email Subject (flow#1) adding Subject as part of new Task Name, and the first team member sends a Request to be assigned to the Task (flow #2) by replying to the original email, you can do the following:

1.- Take Request to be assigned email subject,remove 'Re:' and store the result inside a variable, let's call it 'TargetTaskSubject'

2.- list all tasks by means of this 'List tasks' action block

3.- filter the output by taking only the ones containing 'TargetTaskSubject' by means of Filter array action Block.

 

Flow_FilterTasks.png

Hope this helps

 

 

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttesthat definitely helps! I think I'm almost there using a second flow, and was able to get around the conditional trigger.

 

However, the filter array tasks shows the title correct but the output is empty, which is why I'm assuming the task isn't updating (although I can't confirm as Planner seems to be down). Thoughts?

 

array.png

Hi
Can you show me the content of your variable on that same execution? And also the expression you are using in your Filter Array?
Thanx!

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttes 

 

Will do. So  I have the initialize and compose here, which is successful.

initializeandcompose.pngsuccess.png

I then have a condition to check the body, which comes back as true and sets the variable:

setvar.png

I then do a list tasks for Group ID/Plan ID which is successful in the test. from there I filter, I've tried with is equal to or contains and neither work

filter.png

However, the filter is returning nothing:

array.png

 

Here's the apply to each, which doesn't look like it gets called:

applytoeach.png

Hi

I think the reason for empty result is, the value given to the variable has a space at the beginning, but the name of your task does not have it.
You can add trim() function to your expression in order to remove it
https://docs.microsoft.com/es-es/azure/logic-apps/workflow-definition-language-functions-reference#t...

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttesyessir, that was it. I didn't account for the space, once I added the additional space after the : and tested, everything worked.

 

Everything is now working as expected with 2 flows. I've just run through and tested everything. Essentially, the filter array worked how it should have. Thank you so much for your help!

So everything is working however I'm attempting to combine the two flows. My goal is to check if the task exists, if it doesn't create if it does check the body.

 

Most of it is functioning however I have 2 issues:

 

1. It is doing a FOR-EACH loop and sending the messages/posting multiple times (number of each task already in planner).

2. It looks as though the variables aren't pulling down - for example SubjectTrimmed and DueDate will not work when I attempt to create the task.

 

@efialttes  any thoughts?

Helpful resources

Announcements

Celebrating the May Super User of the Month: Laurens Martens

  @LaurensM  is an exceptional contributor to the Power Platform Community. Super Users like Laurens inspire others through their example, encouragement, and active participation. We are excited to celebrated Laurens as our Super User of the Month for May 2024.   Consistent Engagement:  He consistently engages with the community by answering forum questions, sharing insights, and providing solutions. Laurens dedication helps other users find answers and overcome challenges.   Community Expertise: As a Super User, Laurens plays a crucial role in maintaining a knowledge sharing environment. Always ensuring a positive experience for everyone.   Leadership: He shares valuable insights on community growth, engagement, and future trends. Their contributions help shape the Power Platform Community.   Congratulations, Laurens Martens, for your outstanding work! Keep inspiring others and making a difference in the community!   Keep up the fantastic work!        

Check out the Copilot Studio Cookbook today!

We are excited to announce our new Copilot Cookbook Gallery in the Copilot Studio Community. We can't wait for you to share your expertise and your experience!    Join us for an amazing opportunity where you'll be one of the first to contribute to the Copilot Cookbook—your ultimate guide to mastering Microsoft Copilot. Whether you're seeking inspiration or grappling with a challenge while crafting apps, you probably already know that Copilot Cookbook is your reliable assistant, offering a wealth of tips and tricks at your fingertips--and we want you to add your expertise. What can you "cook" up?   Click this link to get started: https://aka.ms/CS_Copilot_Cookbook_Gallery   Don't miss out on this exclusive opportunity to be one of the first in the Community to share your app creation journey with Copilot. We'll be announcing a Cookbook Challenge very soon and want to make sure you one of the first "cooks" in the kitchen.   Don't miss your moment--start submitting in the Copilot Cookbook Gallery today!     Thank you,  Engagement Team

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Check Out the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community.  We can't wait to see what you "cook" up!    

Welcome to the Power Automate Community

You are now a part of a fast-growing vibrant group of peers and industry experts who are here to network, share knowledge, and even have a little fun.   Now that you are a member, you can enjoy the following resources:   Welcome to the Community   News & Announcements: The is your place to get all the latest news around community events and announcements. This is where we share with the community what is going on and how to participate.  Be sure to subscribe to this board and not miss an announcement.   Get Help with Power Automate Forums: If you're looking for support with any part of Power Automate, our forums are the place to go. From General Power Automate forums to Using Connectors, Building Flows and Using Flows.  You will find thousands of technical professionals, and Super Users with years of experience who are ready and eager to answer your questions. You now have the ability to post, reply and give "kudos" on the Power Automate community forums. Make sure you conduct a quick search before creating a new post because your question may have already been asked and answered. Galleries: The galleries are full of content and can assist you with information on creating a flow in our Webinars and Video Gallery, and the ability to share the flows you have created in the Power Automate Cookbook.  Stay connected with the Community Connections & How-To Videos from the Microsoft Community Team. Check out the awesome content being shared there today.   Power Automate Community Blog: Over the years, more than 700 Power Automate Community Blog articles have been written and published by our thriving community. Our community members have learned some excellent tips and have keen insights on the future of process automation. In the Power Automate Community Blog, you can read the latest Power Automate-related posts from our community blog authors around the world. Let us know if you'd like to become an author and contribute your own writing — everything Power Automate-related is welcome.   Community Support: Check out and learn more about Using the Community for tips & tricks. Let us know in the Community Feedback  board if you have any questions or comments about your community experience. Again, we are so excited to welcome you to the Microsoft Power Automate community family. Whether you are brand new to the world of process automation or you are a seasoned Power Automate veteran - our goal is to shape the community to be your 'go to' for support, networking, education, inspiration and encouragement as we enjoy this adventure together.     Power Automate Community Team

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Users online (4,386)