cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Advocate II
Advocate II

Automatic Printing. A workaround/solution.

I've decided to write this solution for anyone that needs to be able to print automatically from flow.  The solution is pretty easy, but you need a few things first:

  1. A multifunction printer that supports POP3 email protocol (if you can scan to email from your copier it means you likely have POP3 capabilities too.  Most modern copiers have this ability.)
  2. An email address that is dedicated to only this task.

The workflow of this solution is simple:  

  1. Create a PDF in Flow
  2. Email that PDF to your dedicated email address
  3. The copier checks for incoming email and prints off the attached PDF

 

OK, you're still here.  Let's begin.  

 

For this task I will be using Gmail, and a Kyocera Copier.

 

EMAIL SETUP

Requirements:  

  • The email must have POP enabled (gmail, yahoo, and outlook need this protocol enabled manually, it's easy).
  • If you use Gmail, the advanced security must be turned off.
  • You cannot use 2 factor verification. 
  • This email MUST BE dedicated to this task (or else one day you may find your copier has printed 500 pages of "$$%^:) ¢bσµ...."
  1. Go to gmail.com and setup a new PERSONAL GMAIL ACCOUNT.
  2. Once setup go to "settings" and enable "POP" for all mail: 
     
  3. Go to your Google account settings and turn on "Less Secure App Access":  Annotation 2020-05-11 165437.png

That's it for the email.

 

SETUP THE COPIER

REQUIREMENTS:

  • Your copier must support POP3 protocol.  
  • Note:  not all copiers that support POP3 will print email attachments.  Most major brands support this feature: Kyocera, Ricoh, Brother.  Some manufactures require you to purchase a special software addon call I-FAX to do this.
  • You can only print the following: .pdf, .xps, .jpg, .png, .txt.  Some copiers support other file types for direct print, but .pdf is universally accepted.  
  • The copier must have valid network settings.  (IP address, Gateway, DNS).
  1. Google "pop settings for (insert your chosen email provider)":Annotation 2020-05-11 170416.png
  2. Login to your copier's REMOTE USER INTERFACE: 
    1. open a web browser
    2. type in the copier's IPv4 address into the address bar
    3. login (if you don't know the password then Google "default password (insert copiers model/make)"
  3. Navigate to your copier's email settings (each manufacture is different, refer to your manual):  Annotation 2020-05-11 170832.png
  4. Enter your email's POP settings:Annotation 2020-05-11 171302.png
  5. Use the test function from the Copier's web interface.
    1. If it failed check: 
      1. Network settings (for most copiers you have to restart the device for network changes to take affect.  The most common problem is that the DNS settings are wrong.)
      2. SSL/TLS settings:  Gmail uses SSL, others use STARTTLS which they sometimes refer to as just "TLS".
      3. Wrong password.
      4. Email's security settings (on the server's end).

 

That's it, happy printing.  If you need help contact me.  Keep in mind not all copiers support this.  And to set this up properly you need to know basic networking and a little bit about how email clients work.    

 

1 ACCEPTED SOLUTION

Accepted Solutions
Community Support
Community Support

 

Hi @AndrewValenzuel ,

 

Thanks so much for posting in the Power Automate Community! This is a great solution.

Please consider also posting this great method to Power Automate Community Blog forum so that other users can find it easily.

https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog

Thanks for being an active Microsoft Flow Community Member!

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

1 REPLY 1
Community Support
Community Support

 

Hi @AndrewValenzuel ,

 

Thanks so much for posting in the Power Automate Community! This is a great solution.

Please consider also posting this great method to Power Automate Community Blog forum so that other users can find it easily.

https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog

Thanks for being an active Microsoft Flow Community Member!

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

Helpful resources

Announcements
Microsoft Ignite

Microsoft Ignite

Join digitally, March 2–4, 2021 to explore new tech that's ready to implement. Experience the keynote in mixed reality through AltspaceVR!

New Super Users

Meet the Power Automate Super Users!

Many congratulations to the Season 1 2021 Flownaut Crew!

Microsoft Ignite

Microsoft Power Platform: 2021 Release Wave 1 Plan

Power Platform release plan for the 2021 release wave 1 describes all new features releasing from April through September 2021.

MPA Community Blog

Power Automate Community Blog

Check out the community blog page where you can find valuable learning material from community and product team members!

Users online (100,898)