cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
DKitDesign
Frequent Visitor

Automatic Replies Fail with "False" on "All day event" in Office365

I'm trying to create a Flow automated task so when I have an "All Day Event" (like my days off or vacation) in my schedule the flow will set up an automatic reply with a message saying I'm out of the office. My schedule varies week to week so my days off are not consistent.

 

I had it working a week ago for any time there was anything in my schedule, but I only really need it for when I'm not at work (I work based off appointments and use Microsoft Bookings for those and to put in my time-off to block out appointment scheduling). The only thing I changed since it was working was the Status from "Schedule" to "All Day Event" and since then I've had nothing but errors. After the initial error when switching to "All Day Event" I have tried all different variations that I can think of for the "Start/End Time" & "Timezone" sections.

 

Below is the settings for the flow and the test results. I get this result no matter if there is or is not an All Day Event in the schedule. Any thoughts on what the problem could be?

 

Also is it possible to have the return date in the automatic response? For example if I have off Oct 1 & 2 and put them in as all day events have the reply say something like "I should be returning on Oct 3 and will respond as soon as possible."?

 

AutomateOutOfOfficeSettings.PNGTestFail01.PNG

2 ACCEPTED SOLUTIONS

Accepted Solutions
ekarim2020
Super User
Super User

If you want the flow to only trigger if an event is an All Day Event, we can add a trigger condition:

Snag_1a112234.png

 

Snag_1a0e4a8b.png

We want to trigger the flow only if isAllDay is true:

@triggerOutputs()?['body/isAllDay']


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

View solution in original post

Hi @DKitDesign ,

The error occurs because the date and time you are getting from items('Apply_to_each')?['endWithTimeZone'] is '2022-10-10T14:30:00.0000000+00:00' and this not recognised as a UTC date time.

UTC date times usually end in Z to denote a UTC date time.  For example, taking the same date time but adding Z to the end of the string  '2022-10-10T14:30:00.0000000+00:00Z' we get the following output:

 

convertFromUtc('2022-10-10T14:30:00.0000000Z', 'Eastern Standard Time', 'f')
----> Monday, October 10, 2022 10:30 AM

 

We could try formatting the date time to UTC using the formatDateTime function so that the convertFromUtc function can convert the date time to EST:

 

convertFromUtc(formatDateTime(items('Apply_to_each')?['endWithTimeZone'], 'u'), 'Eastern Standard Time', 'f' )

 

The 'u' in the formatDateTime() must be lower case.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

View solution in original post

18 REPLIES 18
ekarim2020
Super User
Super User

Hi @DKitDesign ,

 

The flow is trying to set Status to False. However, there seems to be only three valid values for Status: Disabled, Always Enabled and Scheduled. 

Snag_19e9a7a3.png

 

Please select from one of the values and re-run the flow.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

Thanks for the reply. That is what I had it set at when it was working, but I work based off appointments and they get scheduled in my calendar (between 1 & 3 hours). I'm trying to set it up so the auto-reply is only turned on when I have an All-Day event, not during appointments too.

ekarim2020
Super User
Super User

If you want the flow to only trigger if an event is an All Day Event, we can add a trigger condition:

Snag_1a112234.png

 

Snag_1a0e4a8b.png

We want to trigger the flow only if isAllDay is true:

@triggerOutputs()?['body/isAllDay']


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

That's exactly what I was looking for, thanks!

Well, I replied to soon. It worked with the initial test, but now it doesn't seem to be doing what it's intended to. When I run flow the test it turns on my Automatic Replies for 24 hours from when I run it even if there is no All Day Event scheduled.

ekarim2020
Super User
Super User

Hi @DKitDesign ,

 

Is the trigger condition not working?

 

From the runtime history you can select which fields to display so you can see the values when the flow ran. In the example below, my demo flow is only triggering when the isAllDay field is true:

Snag_1b90ea5.png

What is the configuration for the Set up automatic replies (V2):

Snag_1b604ef.png

 


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up. 

The only "All Day Events" I have in my calendar right now is 10/1-10/3 for my days off this coming week.

 

Here is the rules for the Flow as they're currently set. I've tried adjusting the "Look-Ahead Time" everywhere between 10 and 10000 with no effect. I've also left the Start/End Time DateTime/TimeZone blank and put different "Dynamic Content" items in there to see if it would fix the issue.

RulesRules

 

This is the Trigger condition I set like you said.

Trigger.PNG

 

Here is the run history showing the test with "isAllDay" displaying as "True".

RunTime.PNG

 

Here is my current calendar, as there is no "All Day" events.

Calendar.PNG

 

I logged into my email after running the tests and the Automatic Replies got turned on from 8pm today until 8pm tomorrow. The Start/End Time changes almost every time I run it and there doesn't seem to be any rhyme or reason to when it get set.

AutomaticReplies.PNG

ekarim2020
Super User
Super User

Can you paste the runtime output of the Set up automatic replies (V2):

Snag_204e14.png

This is the close up of the outputs

Snag_217493.png

Ellis

Here it is

RunTimeOutput.PNG

ekarim2020
Super User
Super User

The output is the same as my demo flow. 

 

Can you check if the all day event is not shown at the top of each calendar day:

Snag_325e39.png

 

I'm going to suggest that you delete the Set up automatic replies (V2) action, then add a new Set up automatic replies (V2) action. Then test again.

 

Ellis

I don't have any All Day events in my calendar until 10/1 (next day off). I had the 25th and 26th off previously, and you can see the All Day event listed there.

Calendar2.PNG

 

I deleted it and added a new one. I used the same settings as before in the Set up automatic replies (V2) action created a new, issue?

Error Details: The scheduled duration for sending automatic replies isn't valid.

Outputs: 

Body:

{
  "error": {
    "code": "InvalidScheduledOofDuration",
    "message": "The scheduled duration for sending automatic replies isn't valid."
  }
}

 

Headers:

{
  "Transfer-Encoding": "chunked",
  "Vary": "Accept-Encoding",
  "Strict-Transport-Security": "max-age=31536000",
  "request-id": "89b63f82-d12e-4dcc-8204-4252d07f92bf",
  "client-request-id": "89b63f82-d12e-4dcc-8204-4252d07f92bf",
  "x-ms-ags-diagnostic": "{\"ServerInfo\":{\"DataCenter\":\"East US\",\"Slice\":\"E\",\"Ring\":\"5\",\"ScaleUnit\":\"001\",\"RoleInstance\":\"MN1PEPF00007639\"}}",
  "Timing-Allow-Origin": "*",
  "x-ms-apihub-cached-response": "true",
  "x-ms-apihub-obo": "true",
  "Cache-Control": "private",
  "Date": "Wed, 28 Sep 2022 22:24:29 GMT",
  "Content-Type": "application/json",
  "Content-Length": "151"
}

 

Raw Outputs:

{
    "statusCode": 400,
    "headers": {
        "Transfer-Encoding": "chunked",
        "Vary": "Accept-Encoding",
        "Strict-Transport-Security": "max-age=31536000",
        "request-id": "89b63f82-d12e-4dcc-8204-4252d07f92bf",
        "client-request-id": "89b63f82-d12e-4dcc-8204-4252d07f92bf",
        "x-ms-ags-diagnostic": "{\"ServerInfo\":{\"DataCenter\":\"East US\",\"Slice\":\"E\",\"Ring\":\"5\",\"ScaleUnit\":\"001\",\"RoleInstance\":\"MN1PEPF00007639\"}}",
        "Timing-Allow-Origin": "*",
        "x-ms-apihub-cached-response": "true",
        "x-ms-apihub-obo": "true",
        "Cache-Control": "private",
        "Date": "Wed, 28 Sep 2022 22:24:29 GMT",
        "Content-Type": "application/json",
        "Content-Length": "151"
    },
    "body": {
        "error": {
            "code": "InvalidScheduledOofDuration",
            "message": "The scheduled duration for sending automatic replies isn't valid."
        }
    }
}
ekarim2020
Super User
Super User

The error message reports that the scheduled duration for sending automatic replies isn't valid.

 

Please check the runtime outputs to view the values of the Start and End times:

Snag_633da3.png

Ellis

This is the output for the last one I had that error with.

RunTimeOutput2.PNG

I'm not sure what I did, but it seems to be working now. I have a quick follow up question. I see in your "Internal Reply Message" section you have a formatDateTime string and in your output section you it says "from 29 Sept  to 1 Oct". I've played with formatDateTime a little bit now and can get it to show up in the email in the format I want, but the time zone is wrong. Is there a way to change the time zone from UTC to EST within that string?

I'm currently using 

 

 

formatDateTime(items('Apply_to_each')?['endWithTimeZone'], 'f')

 

 

Edit: I've also used the Convert Time Zone step, but it doesn't seem to be doing anything. Below is the full flow I have setup.

fullFlow.PNG

 

Here is the results of the flow running. You can see end time for the automatic replies is at 10AM, but the email says 2PM.

flow_results.PNG

Hi @DKitDesign,

 

You can use the convertFromUtc function:

convertFromUtc(utcNow(), 'Eastern Standard Time', 'f' )

This will return the date and time in the format: "Saturday, October 8, 2022 6:36 AM"

 

Your expression would be modified to:

convertFromUtc(items('Apply_to_each')?['endWithTimeZone'], 'Eastern Standard Time'), 'f' )

 Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

You can use the convertFromUtc function:

 

 

convertFromUtc(utcNow(), 'Eastern Standard Time', 'f' )

 

 

 

This will return the date and time in the format: "Saturday, October 8, 2022 6:36 AM"

 

Your expression would be modified to:

 

 

convertFromUtc(items('Apply_to_each')?['endWithTimeZone'], 'Eastern Standard Time'), 'f' )

 

--

I tried using the second expression, but received an invalid function warning so I removed the ) from the right of 'Eastern Standard Time', but then was presented with this error:

 

 

 

InvalidTemplate. Unable to process template language expressions in action 'Set_up_automatic_replies_(V2)' inputs at line '0' and column '0': 'The template language function 'convertFromUtc' expects its first parameter to be a string that contains a UTC date time. The value was '2022-10-10T14:30:00.0000000+00:00'. Please see https://aka.ms/logicexpressions#ConvertFromUtc for usage details.'.

 

 

 

 

Hi @DKitDesign ,

The error occurs because the date and time you are getting from items('Apply_to_each')?['endWithTimeZone'] is '2022-10-10T14:30:00.0000000+00:00' and this not recognised as a UTC date time.

UTC date times usually end in Z to denote a UTC date time.  For example, taking the same date time but adding Z to the end of the string  '2022-10-10T14:30:00.0000000+00:00Z' we get the following output:

 

convertFromUtc('2022-10-10T14:30:00.0000000Z', 'Eastern Standard Time', 'f')
----> Monday, October 10, 2022 10:30 AM

 

We could try formatting the date time to UTC using the formatDateTime function so that the convertFromUtc function can convert the date time to EST:

 

convertFromUtc(formatDateTime(items('Apply_to_each')?['endWithTimeZone'], 'u'), 'Eastern Standard Time', 'f' )

 

The 'u' in the formatDateTime() must be lower case.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

That was it, thank you very much!

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.    👉Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS   Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!   Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!       Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!   UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!   European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!     Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!     For more events, click the image below to visit the Microsoft Community Days website.      

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Users online (3,365)