cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
HughBP
Frequent Visitor

Combining multiple objects from single array without using a for loop

Hello everyone, 

 

I am looking for a way to deduplicate items from my array objects and combine my array objects, so they look like the following:

{
    "Name""David Henderson",
    "Weekday""Tuesday",
    "Hours""2.75000000000000"
    "Hours": "4.75000000000000"
    "Hours": "1.75000000000000"
  },

instead of being separate array objects. 

I really don't want to use a for each loop on it as we have over 100 employees and a lot of sites where people check in and out of, so the data sets are often above 6-7k entries by the end of the week and loops take forever. Simultaneously, I'm not sure if it's possible as the entries are extremely random and one person might have 1 or 10 check in's and time slots.

 

Any suggestions would be greatly appreciated. 

 

Below an example of dummy data. 

 

 

[
  {
    "Name""David Henderson",
    "Weekday""Tuesday",
    "Hours""1.00000000000000"
  },
  {
    "Name""David Henderson",
    "Weekday""Tuesday",
    "Hours""1.00000000000000"
  },
  {
    "Name""Amy Moran",
    "Weekday""Tuesday",
    "Hours""2.00000000000000"
  },
  {
    "Name""David Henderson",
    "Weekday""Tuesday",
    "Hours""2.00000000000000"
  },
  {
    "Name""David Henderson",
    "Weekday""Tuesday",
    "Hours""1.00000000000000"
  },
  {
    "Name""Amy Moran",
    "Weekday""Tuesday",
    "Hours""1.00000000000000"
  },
 
1 ACCEPTED SOLUTION

Accepted Solutions

OK, @HughBP , I've had forty winks ... what you see below is two initial, quick steps before a single, frugal, Apply to each.

 

One 'Apply to each' With A Small Footprint

The one big assumption that I've made from your example data is that you're running this once per day, for that day's hours. I've added an addendum to cope with the eventuality that you're not.

 

one apply to each isn't bad - simplified.jpg

 

This can work anywhere in your existing flow, I've used arrayCNST to represent the entirety of your current flow which provides the example data you gave. So any references to that you'd want to obviously replace with your own array.

Part 1 - The Setup

Firstly, you setup an array of names, and an empty array.

Initialize realArrayVAR

The empty array is easily handled with a variable.

Select Names

The array of names is just simple Select action leaving you with an array of names, in your case, multiple David and Amy values!

 

So those need to be distilled down to just the names, with no duplicates, that will be handled in the first part of ...

Part 2 - The Apply to each

Here, you run an Apply to each on a union() of the array of names to filter down to just the names required.

This drastically reduces any loops by reducing any duplicate names:

 

union(body('Select_Names'), body('Select_Names'))

 

 

So from this example you'd be left with:

 

[
  {
    "Name": "David Henderson"
  },
  {
    "Name": "Amy Moran"
  }
]

 

 

Filter

So, now that you're inside that loop, the first step is to use a Filter action on the original array, to filter to only the current name. This would produce, for example:

 

[
  {
    "Name": "David Henderson",
    "Weekday": "Tuesday",
    "Hours": "1.00000000000000"
  },
  {
    "Name": "David Henderson",
    "Weekday": "Tuesday",
    "Hours": "1.00000000000000"
  },
  {
    "Name": "David Henderson",
    "Weekday": "Tuesday",
    "Hours": "2.00000000000000"
  },
  {
    "Name": "David Henderson",
    "Weekday": "Tuesday",
    "Hours": "1.00000000000000"
  }
]

 

 

jsonObject

Now that needs to be summed up in an object to be placed into your new, simpler, array, so let's construct that object in a Compose action, I called it jsonObject, with this basic format:

 

{
  "Name": "string",
  "Hours": 0000
}

 

If you want to skip this action you can, as per the note you see on my Append to array action.

 

The name just takes the name from this Apply to each run with a simple "items('Apply_to_each')?['Name']" expression.

 

In order to work out the hours, though, you need to do some more complicated work. So, thanks to @takolota's prompting, and this blog, there's a nice xpath() calculation to get the hours. This is the long expression is used to calculate that (int() is now float() to allow partial hours):

 

float(
  xpath(
    xml(
      json(
        concat(
          '{"r":{"v":', 
          body('Filter_array'), 
          '}}'
        )
      )
    ), 
    'sum(//v/Hours/text()[number(.) = number(.)])'
  )
)

 

 

The xpath() function takes the Filter action data, ensures the hours are numbers, and adds them all up! The json(concat()) is just wrapping the filter into a structure that the xml() function can understand.

 

That produces the following final output:

 

[
  {
    "Name": "David Henderson",
    "Hours": 5
  },
  {
    "Name": "Amy Moran",
    "Hours": 3
  }
]

 

 

As you might be able to guess, I can probably make one with no Apply to each stage after my interview. But this should suffice.

 

I also left the original code for the Append to array action, which does away with the need for the jsonObject Compose action.

 

Addendum

Oh, and if you wish to do multiple days, you can just add in the additional logic either around, or inside the Apply to each.

 

 

Spoiler

Adding it around, for example, wouldn't add that much additional working for the flow. You would just need to do a parallel select on the days, and union() them together in a new Apply to each, and drag the existing one right in there.

 

Your final result will look something like this:

 

[
  {
    "Name": "David Henderson",
    "Weekday": "Tuesday",
    "Hours": 16
  },
  {
    "Name": "Amy Moran",
    "Weekday": "Tuesday",
    "Hours": 9.5
  },
  {
    "Name": "David Henderson",
    "Weekday": "Wednesday",
    "Hours": 16
  },
  {
    "Name": "Amy Moran",
    "Weekday": "Wednesday",
    "Hours": 9.5
  }
]

 

But you could completely have that be an array of two days, each with their own array of entries, if you liked. It would just require an extra array variable, and a bit of cleansing on each 'daily' loop.

 

View solution in original post

10 REPLIES 10
tom_riha
Most Valuable Professional
Most Valuable Professional

Hello @HughBP ,

you can't create such JSON object as each property name must be unique - it's not possible to have multiple "Hours" properties.

Other than that I'd use a similar approach as described in this article. Get only the unique Name values from all the objects, loop through all the Names and for each of them use 'Filter array' to get only the entries for that given Name. Then you can 'Select' them or count them depending on how you want to process them.



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]

Thanks for that. I'm trying to avoid a for loop in flow to speed it up as much as possible

I'm thinking I might try to combine the hours and days into an array and then going by length and adding the hours whilst deduplicating the days? That might potentially make it faster.   

tom_riha
Most Valuable Professional
Most Valuable Professional

Hello @HughBP ,

I don't think you can do that without any loops, but I'd love to see the solution if you do.



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]
eliotcole
Super User
Super User

Hi, @HughBP , union() is your friend, here.

unionCAWfee.png

 

So here you can see that I have an array with multiple duplicates, and what I do is utilise the union() function (used to fuse arrays) which removes any duplicates as part of its process. However, instead of using separate arrays, I just use the same one twice.

 

union(outputs('arrayCNST'), outputs('arrayCNST'))

 

unionCAWfee results.png

 

 

I'm sure you knew this, mate, and it just didn't ping ... but union() is the great equaliser of same data. 😉

Hello! Thank you, but I’m actually trying to add those numerical values and not deduplicate 🙂 

takolota
Multi Super User
Multi Super User

@tom_riha @HughBP @eliotcole 

 

You could use a Filter array action & a template for the Run script action described here (https://www.tachytelic.net/2021/03/power-automate-sum-array/?amp) to at least reduce the number of Apply to each runs to just the number of employees that you have.

 

Then depending on your needs & the amount of time you have, you could probably find and/or develop a script for the Run script action that aggregated hours by employee without needing separate Filter array, Run script, & Append to array actions inside an Apply to each loop.

Ah, yes, I'd missed the first part.

 

I do have something for this, though, and union() will likely come in ... but yeah, good point.

 

Need to sleep though!

OK, @HughBP , I've had forty winks ... what you see below is two initial, quick steps before a single, frugal, Apply to each.

 

One 'Apply to each' With A Small Footprint

The one big assumption that I've made from your example data is that you're running this once per day, for that day's hours. I've added an addendum to cope with the eventuality that you're not.

 

one apply to each isn't bad - simplified.jpg

 

This can work anywhere in your existing flow, I've used arrayCNST to represent the entirety of your current flow which provides the example data you gave. So any references to that you'd want to obviously replace with your own array.

Part 1 - The Setup

Firstly, you setup an array of names, and an empty array.

Initialize realArrayVAR

The empty array is easily handled with a variable.

Select Names

The array of names is just simple Select action leaving you with an array of names, in your case, multiple David and Amy values!

 

So those need to be distilled down to just the names, with no duplicates, that will be handled in the first part of ...

Part 2 - The Apply to each

Here, you run an Apply to each on a union() of the array of names to filter down to just the names required.

This drastically reduces any loops by reducing any duplicate names:

 

union(body('Select_Names'), body('Select_Names'))

 

 

So from this example you'd be left with:

 

[
  {
    "Name": "David Henderson"
  },
  {
    "Name": "Amy Moran"
  }
]

 

 

Filter

So, now that you're inside that loop, the first step is to use a Filter action on the original array, to filter to only the current name. This would produce, for example:

 

[
  {
    "Name": "David Henderson",
    "Weekday": "Tuesday",
    "Hours": "1.00000000000000"
  },
  {
    "Name": "David Henderson",
    "Weekday": "Tuesday",
    "Hours": "1.00000000000000"
  },
  {
    "Name": "David Henderson",
    "Weekday": "Tuesday",
    "Hours": "2.00000000000000"
  },
  {
    "Name": "David Henderson",
    "Weekday": "Tuesday",
    "Hours": "1.00000000000000"
  }
]

 

 

jsonObject

Now that needs to be summed up in an object to be placed into your new, simpler, array, so let's construct that object in a Compose action, I called it jsonObject, with this basic format:

 

{
  "Name": "string",
  "Hours": 0000
}

 

If you want to skip this action you can, as per the note you see on my Append to array action.

 

The name just takes the name from this Apply to each run with a simple "items('Apply_to_each')?['Name']" expression.

 

In order to work out the hours, though, you need to do some more complicated work. So, thanks to @takolota's prompting, and this blog, there's a nice xpath() calculation to get the hours. This is the long expression is used to calculate that (int() is now float() to allow partial hours):

 

float(
  xpath(
    xml(
      json(
        concat(
          '{"r":{"v":', 
          body('Filter_array'), 
          '}}'
        )
      )
    ), 
    'sum(//v/Hours/text()[number(.) = number(.)])'
  )
)

 

 

The xpath() function takes the Filter action data, ensures the hours are numbers, and adds them all up! The json(concat()) is just wrapping the filter into a structure that the xml() function can understand.

 

That produces the following final output:

 

[
  {
    "Name": "David Henderson",
    "Hours": 5
  },
  {
    "Name": "Amy Moran",
    "Hours": 3
  }
]

 

 

As you might be able to guess, I can probably make one with no Apply to each stage after my interview. But this should suffice.

 

I also left the original code for the Append to array action, which does away with the need for the jsonObject Compose action.

 

Addendum

Oh, and if you wish to do multiple days, you can just add in the additional logic either around, or inside the Apply to each.

 

 

Spoiler

Adding it around, for example, wouldn't add that much additional working for the flow. You would just need to do a parallel select on the days, and union() them together in a new Apply to each, and drag the existing one right in there.

 

Your final result will look something like this:

 

[
  {
    "Name": "David Henderson",
    "Weekday": "Tuesday",
    "Hours": 16
  },
  {
    "Name": "Amy Moran",
    "Weekday": "Tuesday",
    "Hours": 9.5
  },
  {
    "Name": "David Henderson",
    "Weekday": "Wednesday",
    "Hours": 16
  },
  {
    "Name": "Amy Moran",
    "Weekday": "Wednesday",
    "Hours": 9.5
  }
]

 

But you could completely have that be an array of two days, each with their own array of entries, if you liked. It would just require an extra array variable, and a bit of cleansing on each 'daily' loop.

 

That is awesome! Thank you so much!

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!  Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Users online (5,663)