cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Bogdan
Frequent Visitor

Create/Map Array from Array String

Hello Powerusers,

I sadly cannot get along with this. So I hope I can get some direction from here:
 I have:

 

[
"Device Number": ["12324","67890"],
"Device Type": ["abc","xyz"]
]

 

 

 

 

 


And I need:

 

[
	{
	"Device Number": "12324",
	"Device Type": "abc"
	},
	{
	"Device Number": "67890",
	"Device Type": "xyz"
	}

]

 

 

 

 

 


How on earth can I do this in MS Flow? I am getting nuts with it 😞
Thank you in advance ! Cheers !

1 ACCEPTED SOLUTION

Accepted Solutions
eliotcole
Super User
Super User

Nice, OK, here you go!

 

If some of the values don't have the same amount of comma separated items it will need a workaround. But this should be good for most eventualities.

 

Anyway...

 

Solution

Create a Select action which performs in its 'From' field a range() expression based on the number of comma separated values in that first "Gerätetyp" field.

 

Then since the Select action is essentially just looking at an array of integer numbers, you can use those numbers to refer to each comma separated value in the original data. 🙂

 

Example Flow

range select.jpg

 

Expressions From

The 'From' field has the following expression to create the range of incrementing integers:

 

 

 

range(0, length(split(outputs('dataIn')?['Gerätetyp'], ',')))

 

 

 

What this is doing is:

  1. split() - It splits the data in the "Gerätetyp" value by a comma (',') to create an array.
  2. length() - It counts how many items are in the created array.
  3. range() - It creates a "range" array that starts at the number 0 and finishes at whatever the length() function has found.

This represents simply in this example as:

 

 

[
  0,
  1
]

 

  Keys and Values

 

The values for each key that is defined are detailed on separate lines in this code block:

 

 

 

split(outputs('dataIn')?['Gerätetyp'], ',')[item()]

split(outputs('dataIn')?['Bezeichnung'], ',')[item()]

split(outputs('dataIn')?['Gerätenummer'], ',')[item()]

split(outputs('dataIn')?['Hersteller'], ',')[item()]

outputs('dataIn')?['Datum']

 

 

 

 

Here you are looking for the most part at very similar expression language as the 'From' field. Except here you are picking an item out of the split() array by using an integer that is defined by the range which you created.

 

This is because when you call item() in a Filter or Select action you are picking the data in that specific array item, which in this case is simply a number and that number indicates which comma separated item you need from each of the original fields.

 

PRESTO!

 

range select - result.jpg

 

View solution in original post

9 REPLIES 9
eliotcole
Super User
Super User

Firstly, can we see what you have so far in your flow, please?

 

Make sure that you blank out any sensitive data, and edit it into the original post.

 

Secondly, and purely for your information, there's a chance that you might need to use a select action here (which is the equivalent of an array map) with some expressions containing xpath() with xml() trickery involved, however it should be possible.

 

Thirdly; One question ... this first code block that you posted:

[
  "Device Number": ["12324","67890"],
  "Device Type": ["abc","xyz"]
]

 

Can I ask where that's from? Only I'm just curious if it's a mistype (no offence!), or it's the output of a program that kinda does its own thing! 😅

 

If it's a mistype, should that have been set as an object, thusly?

{
  "Device Number": ["12324","67890"],
  "Device Type": ["abc","xyz"]
}

 

Sorry, just trying to understand how you have got the text that you have.

 

There's a reason, because if this is text that you've generated yourself, then we can help (after seeing the flow) by generating that properly. If it's what a program provides, then I would assume we'll be clipping the first and last lines, then working the previously mentioned select xpath stuff. 🙂

 

Let us see that flow and if you can lemme know about that first code block. 👍

Hy,
Thank you for the reply! 🙂
To answer your questions:

Firstly - I changed it already so much, that it is a mess.

Secondly - I might have thought that it can be done with "Select" and such.

Thirdly: Yes I wrote it by hand 🙂

 

But I wil try to explain the workflow.

Data comes from a Powerapp Collection. It looks like this:

 

{
  "Gerätetyp": "Notebook,Handy",
  "Bezeichnung": "200WS,200WS",
  "Gerätenummer": "WS_Test_Notebook,A_Test_Handy",
  "Hersteller": "Lenovo,Apple",
  "Datum": "10/28/2021"
}

 

The idea is to create this below, so that I can populate a Word Document Template Table with repeating rows:

 

{
  "Gerätetyp": "Notebook",
  "Bezeichnung": "200WS",
  "Gerätenummer": "WS_Test_Notebook",
  "Hersteller": "Lenovo"
 
},{
  "Gerätetyp": "Handy",
  "Bezeichnung": "200WS",
  "Gerätenummer": "A_Test_Handy",
  "Hersteller": "Apple",
}

 

The Word Document Table shows like this:

Bogdan_0-1635433333378.png

And in Word:

Bogdan_1-1635433375557.png


So I need repeating rows, which need (I guess) a valid JSON.
What I have so far:

Bogdan_2-1635433536905.png

Bogdan_3-1635433679971.png

 


I hope I managed to express myself good enough. 😕

Thank you !



 

 

eliotcole
Super User
Super User

This is great, @Bogdan ... I'll be right back. 🙂

 

One question, when there is multiple entries in each of these key values, do they always contain the same number of comma separations in each one?

{
  "Gerätetyp": "Notebook,Handy",
  "Bezeichnung": "200WS,200WS",
  "Gerätenummer": "WS_Test_Notebook,A_Test_Handy",
  "Hersteller": "Lenovo,Apple",
  "Datum": "10/28/2021"
}

So, if "Gerätetyp" has 3 comma separated values then "Bezeichnung", "Gerätenummer", and "Hersteller" will also have three?

 

Oh ... and your English is better than mine!!!

Yes, those 4 will always have the same comma separated key Values.

Thanks for the English :-))

eliotcole
Super User
Super User

Nice, OK, here you go!

 

If some of the values don't have the same amount of comma separated items it will need a workaround. But this should be good for most eventualities.

 

Anyway...

 

Solution

Create a Select action which performs in its 'From' field a range() expression based on the number of comma separated values in that first "Gerätetyp" field.

 

Then since the Select action is essentially just looking at an array of integer numbers, you can use those numbers to refer to each comma separated value in the original data. 🙂

 

Example Flow

range select.jpg

 

Expressions From

The 'From' field has the following expression to create the range of incrementing integers:

 

 

 

range(0, length(split(outputs('dataIn')?['Gerätetyp'], ',')))

 

 

 

What this is doing is:

  1. split() - It splits the data in the "Gerätetyp" value by a comma (',') to create an array.
  2. length() - It counts how many items are in the created array.
  3. range() - It creates a "range" array that starts at the number 0 and finishes at whatever the length() function has found.

This represents simply in this example as:

 

 

[
  0,
  1
]

 

  Keys and Values

 

The values for each key that is defined are detailed on separate lines in this code block:

 

 

 

split(outputs('dataIn')?['Gerätetyp'], ',')[item()]

split(outputs('dataIn')?['Bezeichnung'], ',')[item()]

split(outputs('dataIn')?['Gerätenummer'], ',')[item()]

split(outputs('dataIn')?['Hersteller'], ',')[item()]

outputs('dataIn')?['Datum']

 

 

 

 

Here you are looking for the most part at very similar expression language as the 'From' field. Except here you are picking an item out of the split() array by using an integer that is defined by the range which you created.

 

This is because when you call item() in a Filter or Select action you are picking the data in that specific array item, which in this case is simply a number and that number indicates which comma separated item you need from each of the original fields.

 

PRESTO!

 

range select - result.jpg

 

Wow,
This is the Output I am Looking for !
I will try it tomorrow, as I am not at office right now.

Thank you very much for the Info & Solution! This is by far the trickiest thing I have dealt with until now. 🙂

eliotcole
Super User
Super User

No problems, Bogdan. Do let me know how you get on, and if you have issues, feel free to private message me about them. 🙂

Good morning,
Thank you for the solution ! 
I accept your proposal as solution, because it meets my requirement.

BUT there ist a But :))

The template columns get populated only with the first column:

Any idea why ? 

 

SOLVED - I had an older control in the Template, which I deleted, and NOW:

Bogdan_0-1635496877820.png

🎉Thank you @eliotcole  !


BR

 

 

eliotcole
Super User
Super User

Amazing, mate! Happy you're all sorted!

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Tuesday Tips: Community Ranks and YOU

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!This Week: Community Ranks--Moving from "Member" to "Community Champion"   Have you ever wondered how your fellow community members ascend the ranks within our community? What sets apart an Advocate from a Helper, or a Solution Sage from a Community Champion? In today’s #TuesdayTip, we’re unveiling the secrets and sharing tips to help YOU elevate your ranking—and why it matters to our vibrant communities. Community ranks serve as a window into a member’s role and activity. They celebrate your accomplishments and reveal whether someone has been actively contributing and assisting others. For instance, a Super User is someone who has been exceptionally helpful and engaged. Some ranks even come with special permissions, especially those related to community management. As you actively participate—whether by creating new topics, providing solutions, or earning kudos—your rank can climb. Each time you achieve a new rank, you’ll receive an email notification. Look out for the icon and rank name displayed next to your username—it’s a badge of honor! Fun fact: Your Community Engagement Team keeps an eye on these ranks, recognizing the most passionate and active community members. So shine brightly with valuable content, and you might just earn well-deserved recognition! Where can you see someone’s rank? When viewing a post, you’ll find a member’s rank to the left of their name.Click on a username to explore their profile, where their rank is prominently displayed. What about the ranks themselves? New members start as New Members, progressing to Regular Visitors, and then Frequent Visitors.Beyond that, we have a categorized system: Kudo Ranks: Earned through kudos (teal icons).Post Ranks: Based on your posts (purple icons).Solution Ranks: Reflecting your solutions (green icons).Combo Ranks: These orange icons combine kudos, solutions, and posts. The top ranks have unique names, making your journey even more exciting! So dive in, collect those kudos, share solutions, and let’s see how high you can rank!  🌟 🚀   Check out the Using the Community boards in each of the communities for more helpful information!  Power Apps, Power Automate, Copilot Studio & Power Pages

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

Users online (4,939)