cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
admiralman
Helper I
Helper I

Create Table Excel

I have tried to create a flow that triggers when an email with an attachment is received. It then downloads the attachment to OneDrive to a file named Employees.xlsx. This portion of the flow works perfectly. I need to read the data within the Excel file to post it to an SP list. Since Get Rows is deprecated and my file does not have a table I need to use the Create Table with Excel Online Business. I have tried this within one flow with a delay of 5 minutes between the Create File and the Create Table actions and receive the following error from the Create Table action:

 

{
"status": 404,
"message": "The resource could not be found.\r\nclientRequestId: 6ff46304-d3ee-42bd-82fa-321f945df761\r\nserviceRequestId: 7a4c1f71-1a47-4a7a-bfd0-314913ff208c",
"source": "excelonline-ncus.azconn-ncus.p.azurewebsites.net"
}

 

I have tried to set this up as two flows with the first getting the attachment from the email and saving and the second triggered by a new file creation. The second then tries the Create Table with a delay of 5 minutes before hand with the same issue. I have scoured the forums and the internet and this seems like a common problem along with file locking issues. Is MS Flow just not mature enough yet to handle an operation of this sort? I have seen one implementation that utilizes the Graph but if I have to go that route I would pursue other options and eliminated the reliability issues of Flow altogether. Any direction would be appreciated. Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

Ok, so the issue is creating a table in the existing Excel document in the first Flow... I have just updated my previous example which has worked fine:

1.PNG

 The Flow run:

1.PNG

 

The resulting file:

1.PNG

 

So this should cover your requirements for Flow 1:

1. Save the file

2. Create the table

Set Flow 2 to be triggered by an update to the File (You may need to add logic for recursive events):

1. Get the Data

2. Add the data to the excel document

 

HTH

Jay

View solution in original post

29 REPLIES 29
Jay-Encodian
Community Champion
Community Champion

Hi @admiralman 

Can you please share screen shots of your Flow configuration, specifically the 'Create File and 'Create Table' actions?

The following Flow worked fine for me... you'd just need to add configuration to do something with the data obtained from the Excel file:

1.png

I used the following expression to name the file:

concat(utcNow(),'.xlsx')
NOTE: This Flow would also required some conditional logic to ensure the Flow only ran under specific circumstances to prevent failures for multiple attachments, etc.

HTH

Jay

-------------------------------------------------------------------------

If I have answered your question, please mark your post as Solved.

If you like my response, please give it a Thumbs Up

 

Thanks @Jay-Encodian ,

 

Here are the two flows side by side. As I mentioned before, I had everything in one flow and the same results.  Remember, I am saving to OneDrive and I have to Create Table as it doesnt exist in the Attachment.

 

Flow.PNG

Hey @admiralman 

Referring to my working example Flow.... this downloads the attachment from the email, obtains the data from the spreadsheet... you'd just need to add additional logic reference to what you wanted to do with each row of data from the spreadsheet.

Am I missing something extra in your requirements that this Flow doesn't cover?

Jay

The issue is not knowing HOW to do this, its the fact that it doesn't work. I can create the file but a table is required in order to get the rows in the Excel document. I try to Create Table I get the error I mentioned. The resource is there because I just created it but there is something causing an error.  Why don't you try this on your side?

 

1. Get excel document that doesn't have a table from email and save it to a OneDrive.

2. Create an Excel table in the downloaded Excel document. 

3. Get all rows from Excel table and load into SP List.

 

That is what I'm trying to accomplish...your example doesn't have those complications.

 

@admiralman 

Please remember we are a community giving up our own time to help you.

Your requirements of adding data to the table were not clear, which is why the original example didn't include that example and I'd asked for you to clarify.

The steps still do not make sense to me and your Flow configuration looks confused against your requirements:

1. Get excel document that doesn't have a table from email and save it to a OneDrive - OK

2. Create an Excel table in the downloaded Excel document. - OK

3. Get all rows from Excel table and load into SP List. - When was data added to the table? I assume this should be the other way around?

May be of interest: https://powerusers.microsoft.com/t5/Building-Flows/Create-a-Worksheet-and-Table-in-Excel-and-then-ad...

I think you need to do the following:

Flow 1

  1. Extract the Excel document from the Email then add to OneDrive or SharePoint
  2. Create the Table in the Excel document
  3. Trigger another Flow (Flow 2)

Flow 2

  1. Get data which you need to add to the Table
  2. Add the data to the Table

Or for absolute clarity are you simply saying that you cannot find a way to add the table to the Excel document after you have added the file to OneDrive / SharePoint? If there's a file locking issue have you considered processing on Azure storage to work around?

Jay

@Jay-Encodian 

The data already exists within the Excel document however there is not a Table (Named Range) defined on the Excel sheet. Without that, you can't use the "List rows present in a table" action of the Excel Online for Business connector. 

 

Hopefully this will answer:

 

3. Get all rows from Excel table and load into SP List. - When was data added to the table? I assume this should be the other way around?

 

For your other suggestion..l have tried and the Create Table action fails with the same message.

 

Flow 1

  1. Extract the Excel document from the Email then add to OneDrive or SharePoint
  2. Create the Table in the Excel document
  3. Trigger another Flow (Flow 2)

Flow 2

  1. Get data which you need to add to the Table
  2. Add the data to the Table

Ok, so the issue is creating a table in the existing Excel document in the first Flow... I have just updated my previous example which has worked fine:

1.PNG

 The Flow run:

1.PNG

 

The resulting file:

1.PNG

 

So this should cover your requirements for Flow 1:

1. Save the file

2. Create the table

Set Flow 2 to be triggered by an update to the File (You may need to add logic for recursive events):

1. Get the Data

2. Add the data to the excel document

 

HTH

Jay

@Jay-Encodian That seems to work and thank you. I was looking for a solution using OneDrive for Business but I accepted this all the same. Any idea if this could work in OneDrive instead of an SP library?

@admiralman 

Good news 

Ref OneDrive; I don’t foresee why it wouldn’t work but unless these files are personal document they should really be in SharePoint even if they are transient. It should be simple to test, just replace the SharePoint actions with the OneDrive equivalents

Anonymous
Not applicable

I hit a similar issue with the 404 Resource could not be found error message when trying to create a table on an existing XLSX file in OneDrive (for Business). Stumbled across this thread, and following the recommended Solution (saving to Sharepoint instead of OneDrive) was able to get it to work.

 

That then got me thinking about why it wasn't working in OneDrive. So I spent some time troubleshooting and figured it out.

 

In the "Excel Create Table" flow if you use the file name of like /MyFolder/filename.xlsx , the flow will FAIL with the 404 resource error.

 

Where as if you use the Dynamic Expression "Id" which is the unique identfier of the file (From the OneDrive Create File flow or from the OneDrive Get Metadata flow). Then it runs successfully! Seems calling Excel Create Table doesn't play nicely with the actual reference file name.

 

2020-03-10 12_54_27-Window.png

Thank u! Using file metadata ID solved my problem

RCB
Frequent Visitor

rcheetah, you are a gift from heaven.  I've been trying to get a string expression to work for days.  When you select a file from the chooser on that action, it populates the chooser's textbox with a path to the file.  But if you copy that very same path into an expression on the textbox, the flow fails.  Infuriating.

 

Using the ID leads to success.  The folks who made this action need a talking to when it comes to user expectations.  

 

 

To add to this, how can you create a table if you dont know how many rows there are?  Is there a way to get the total number of rows, to pass into the Table Create function?

I did a Create Table and specified a table range that I knew was larger than my data set. I then did a list rows present in table and passed that value to a filter array. I filtered the array based upon a column value being not

empty "empty of column1 is equal to bool false"

 

 

2021-02-22 10_57_06-Power Apps.png

 

 

 

Clever idea @admiralman - so this will only add rows with data to the list and ignore empty rows? And could you clarify the "empty" filter - not finding it.

admiralman
Helper I
Helper I

It is...wish I could take credit but I found the solution on here. Yes, it will filter them out.

 

empty(item()?['First Column in Excel'])
Nabrina_Pow
Regular Visitor

How do i set the Table Range, while the file is coming from email and the rows are dynamic

For mycase an email  with 2 csv attachment comes to a shared mailbox every week. 

As suggested above by @admiralman , create the table with enough rows to accommodate the largest number possible, and then apply filter so only rows with data are passed to the list. 

Hello there

I am doing the exercise but it does not work for me

Do you have any idea?

 

pronuer_0-1633028252945.png

 

Helpful resources

Announcements

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Getting Started with Private Messages & Macros

Welcome to TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   This Week's Tip: Private Messaging & Macros in Power Apps Community   Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member!   Our Knowledge Base article about private messaging and macros is the best place to find out more. Check it out today and discover some key tips and tricks when it comes to messages and macros:   Private Messaging: Learn how to enable private messages in your community profile and ensure you’re connected with other community membersMacros Explained: Discover the convenience of macros—prewritten text snippets that save time when posting in forums or sending private messagesCreating Macros: Follow simple steps to create your own macros for efficient communication within the Power Apps CommunityUsage Guide: Understand how to apply macros in posts and private messages, enhancing your interaction with the Community For detailed instructions and more information, visit the full page in your community today:Power Apps: Enabling Private Messaging & How to Use Macros (Power Apps)Power Automate: Enabling Private Messaging & How to Use Macros (Power Automate)  Copilot Studio: Enabling Private Messaging &How to Use Macros (Copilot Studio) Power Pages: Enabling Private Messaging & How to Use Macros (Power Pages)

Tuesday Tip: Subscriptions & Notifications

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week: All About Subscriptions & Notifications We don't want you to a miss a thing in the Community! The best way to make sure you know what's going on in the News & Announcements, to blogs you follow, or forums and galleries you're interested in is to subscribe! These subscriptions ensure you receive automated messages about the most recent posts and replies. Even better, there are multiple ways you can subscribe to content and boards in the community! (Please note: if you have created an AAD (Azure Active Directory) account you won't be able to receive e-mail notifications.)   Subscribing to a Category  When you're looking at the entire category, select from the Options drop down and choose Subscribe.     You can then choose to Subscribe to all of the boards or select only the boards you want to receive notifications. When you're satisfied with your choices, click Save.     Subscribing to a Topic You can also subscribe to a single topic by clicking Subscribe from the Options drop down menu, while you are viewing the topic or in the General board overview, respectively.     Subscribing to a Label Find the labels at the bottom left of a post.From a particular post with a label, click on the label to filter by that label. This opens a window containing a list of posts with the label you have selected. Click Subscribe.     Note: You can only subscribe to a label at the board level. If you subscribe to a label named 'Copilot' at board #1, it will not automatically subscribe you to an identically named label at board #2. You will have to subscribe twice, once at each board.   Bookmarks Just like you can subscribe to topics and categories, you can also bookmark topics and boards from the same menus! Simply go to the Topic Options drop down menu to bookmark a topic or the Options drop down to bookmark a board. The difference between subscribing and bookmarking is that subscriptions provide you with notifications, whereas bookmarks provide you a static way of easily accessing your favorite boards from the My subscriptions area.   Managing & Viewing Your Subscriptions & Bookmarks To manage your subscriptions, click on your avatar and select My subscriptions from the drop-down menu.     From the Subscriptions & Notifications tab, you can manage your subscriptions, including your e-mail subscription options, your bookmarks, your notification settings, and your email notification format.     You can see a list of all your subscriptions and bookmarks and choose which ones to delete, either individually or in bulk, by checking multiple boxes.     A Note on Following Friends on Mobile Adding someone as a friend or selecting Follow in the mobile view does not allow you to subscribe to their activity feed. You will merely be able to see your friends’ biography, other personal information, or online status, and send messages more quickly by choosing who to send the message to from a list, as opposed to having to search by username.

Users online (3,316)