cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
admiralman
Helper I
Helper I

Create Table Excel

I have tried to create a flow that triggers when an email with an attachment is received. It then downloads the attachment to OneDrive to a file named Employees.xlsx. This portion of the flow works perfectly. I need to read the data within the Excel file to post it to an SP list. Since Get Rows is deprecated and my file does not have a table I need to use the Create Table with Excel Online Business. I have tried this within one flow with a delay of 5 minutes between the Create File and the Create Table actions and receive the following error from the Create Table action:

 

{
"status": 404,
"message": "The resource could not be found.\r\nclientRequestId: 6ff46304-d3ee-42bd-82fa-321f945df761\r\nserviceRequestId: 7a4c1f71-1a47-4a7a-bfd0-314913ff208c",
"source": "excelonline-ncus.azconn-ncus.p.azurewebsites.net"
}

 

I have tried to set this up as two flows with the first getting the attachment from the email and saving and the second triggered by a new file creation. The second then tries the Create Table with a delay of 5 minutes before hand with the same issue. I have scoured the forums and the internet and this seems like a common problem along with file locking issues. Is MS Flow just not mature enough yet to handle an operation of this sort? I have seen one implementation that utilizes the Graph but if I have to go that route I would pursue other options and eliminated the reliability issues of Flow altogether. Any direction would be appreciated. Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

Ok, so the issue is creating a table in the existing Excel document in the first Flow... I have just updated my previous example which has worked fine:

1.PNG

 The Flow run:

1.PNG

 

The resulting file:

1.PNG

 

So this should cover your requirements for Flow 1:

1. Save the file

2. Create the table

Set Flow 2 to be triggered by an update to the File (You may need to add logic for recursive events):

1. Get the Data

2. Add the data to the excel document

 

HTH

Jay

View solution in original post

29 REPLIES 29
Jay-Encodian
Community Champion
Community Champion

Hi @admiralman 

Can you please share screen shots of your Flow configuration, specifically the 'Create File and 'Create Table' actions?

The following Flow worked fine for me... you'd just need to add configuration to do something with the data obtained from the Excel file:

1.png

I used the following expression to name the file:

concat(utcNow(),'.xlsx')
NOTE: This Flow would also required some conditional logic to ensure the Flow only ran under specific circumstances to prevent failures for multiple attachments, etc.

HTH

Jay

-------------------------------------------------------------------------

If I have answered your question, please mark your post as Solved.

If you like my response, please give it a Thumbs Up

 

Thanks @Jay-Encodian ,

 

Here are the two flows side by side. As I mentioned before, I had everything in one flow and the same results.  Remember, I am saving to OneDrive and I have to Create Table as it doesnt exist in the Attachment.

 

Flow.PNG

Hey @admiralman 

Referring to my working example Flow.... this downloads the attachment from the email, obtains the data from the spreadsheet... you'd just need to add additional logic reference to what you wanted to do with each row of data from the spreadsheet.

Am I missing something extra in your requirements that this Flow doesn't cover?

Jay

The issue is not knowing HOW to do this, its the fact that it doesn't work. I can create the file but a table is required in order to get the rows in the Excel document. I try to Create Table I get the error I mentioned. The resource is there because I just created it but there is something causing an error.  Why don't you try this on your side?

 

1. Get excel document that doesn't have a table from email and save it to a OneDrive.

2. Create an Excel table in the downloaded Excel document. 

3. Get all rows from Excel table and load into SP List.

 

That is what I'm trying to accomplish...your example doesn't have those complications.

 

@admiralman 

Please remember we are a community giving up our own time to help you.

Your requirements of adding data to the table were not clear, which is why the original example didn't include that example and I'd asked for you to clarify.

The steps still do not make sense to me and your Flow configuration looks confused against your requirements:

1. Get excel document that doesn't have a table from email and save it to a OneDrive - OK

2. Create an Excel table in the downloaded Excel document. - OK

3. Get all rows from Excel table and load into SP List. - When was data added to the table? I assume this should be the other way around?

May be of interest: https://powerusers.microsoft.com/t5/Building-Flows/Create-a-Worksheet-and-Table-in-Excel-and-then-ad...

I think you need to do the following:

Flow 1

  1. Extract the Excel document from the Email then add to OneDrive or SharePoint
  2. Create the Table in the Excel document
  3. Trigger another Flow (Flow 2)

Flow 2

  1. Get data which you need to add to the Table
  2. Add the data to the Table

Or for absolute clarity are you simply saying that you cannot find a way to add the table to the Excel document after you have added the file to OneDrive / SharePoint? If there's a file locking issue have you considered processing on Azure storage to work around?

Jay

@Jay-Encodian 

The data already exists within the Excel document however there is not a Table (Named Range) defined on the Excel sheet. Without that, you can't use the "List rows present in a table" action of the Excel Online for Business connector. 

 

Hopefully this will answer:

 

3. Get all rows from Excel table and load into SP List. - When was data added to the table? I assume this should be the other way around?

 

For your other suggestion..l have tried and the Create Table action fails with the same message.

 

Flow 1

  1. Extract the Excel document from the Email then add to OneDrive or SharePoint
  2. Create the Table in the Excel document
  3. Trigger another Flow (Flow 2)

Flow 2

  1. Get data which you need to add to the Table
  2. Add the data to the Table

Ok, so the issue is creating a table in the existing Excel document in the first Flow... I have just updated my previous example which has worked fine:

1.PNG

 The Flow run:

1.PNG

 

The resulting file:

1.PNG

 

So this should cover your requirements for Flow 1:

1. Save the file

2. Create the table

Set Flow 2 to be triggered by an update to the File (You may need to add logic for recursive events):

1. Get the Data

2. Add the data to the excel document

 

HTH

Jay

@Jay-Encodian That seems to work and thank you. I was looking for a solution using OneDrive for Business but I accepted this all the same. Any idea if this could work in OneDrive instead of an SP library?

@admiralman 

Good news 

Ref OneDrive; I don’t foresee why it wouldn’t work but unless these files are personal document they should really be in SharePoint even if they are transient. It should be simple to test, just replace the SharePoint actions with the OneDrive equivalents

Anonymous
Not applicable

I hit a similar issue with the 404 Resource could not be found error message when trying to create a table on an existing XLSX file in OneDrive (for Business). Stumbled across this thread, and following the recommended Solution (saving to Sharepoint instead of OneDrive) was able to get it to work.

 

That then got me thinking about why it wasn't working in OneDrive. So I spent some time troubleshooting and figured it out.

 

In the "Excel Create Table" flow if you use the file name of like /MyFolder/filename.xlsx , the flow will FAIL with the 404 resource error.

 

Where as if you use the Dynamic Expression "Id" which is the unique identfier of the file (From the OneDrive Create File flow or from the OneDrive Get Metadata flow). Then it runs successfully! Seems calling Excel Create Table doesn't play nicely with the actual reference file name.

 

2020-03-10 12_54_27-Window.png

Thank u! Using file metadata ID solved my problem

RCB
Frequent Visitor

rcheetah, you are a gift from heaven.  I've been trying to get a string expression to work for days.  When you select a file from the chooser on that action, it populates the chooser's textbox with a path to the file.  But if you copy that very same path into an expression on the textbox, the flow fails.  Infuriating.

 

Using the ID leads to success.  The folks who made this action need a talking to when it comes to user expectations.  

 

 

To add to this, how can you create a table if you dont know how many rows there are?  Is there a way to get the total number of rows, to pass into the Table Create function?

I did a Create Table and specified a table range that I knew was larger than my data set. I then did a list rows present in table and passed that value to a filter array. I filtered the array based upon a column value being not

empty "empty of column1 is equal to bool false"

 

 

2021-02-22 10_57_06-Power Apps.png

 

 

 

Clever idea @admiralman - so this will only add rows with data to the list and ignore empty rows? And could you clarify the "empty" filter - not finding it.

admiralman
Helper I
Helper I

It is...wish I could take credit but I found the solution on here. Yes, it will filter them out.

 

empty(item()?['First Column in Excel'])
Nabrina_Pow
Regular Visitor

How do i set the Table Range, while the file is coming from email and the rows are dynamic

For mycase an email  with 2 csv attachment comes to a shared mailbox every week. 

As suggested above by @admiralman , create the table with enough rows to accommodate the largest number possible, and then apply filter so only rows with data are passed to the list. 

Hello there

I am doing the exercise but it does not work for me

Do you have any idea?

 

pronuer_0-1633028252945.png

 

Helpful resources

Announcements

Summer of Solutions | Week 3 Results | Win free tickets to the Power Platform Conference

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22  

Copilot Cookbook Challenge | WINNERS ANNOUNCED | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge random winners have been selected for the Challenge.  Thank you to everyone who participated in this challenge.    Copilot Cookbook Gallery:Power Apps Cookbook Gallery: 1. @swaminawale  1. @renatoromao     2.  @SpongYe  2.   @nickpotts10  *Please note if for any reason a winner declines, we will have another random drawing.   Check out all of the Cookbook Submissions: 1. Copilot Studio Cookbook Gallery: https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30WINNERS ANNOUNCED - JULY 8th     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge. Early Bird Submissions: @renato Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  n/a2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a   Week 2 Results:  Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Kasun_Pathirana1. ManishSolanki2. cloudatica2. madlad3. n/a3. SpongYe4. n/a4. n/a5. n/a5. n/a     Week 3 Results:  Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Parul_Yadav_Neo1. n/a2. SpongYe2. n/a3. n/a3. n/a4. n/a4. n/a5. n/a5. n/a   Week 4 Results:  Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. @nickpotts10  1. @ShrushtiShah  2. @Suniti_0020 2. @swaminawale 3. n/a3. @farukhis786 4. n/a4. @ManishSolanki  5. n/a5.  n/a

Important Update for Community Platform Access | READ ONLY July 16-22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Tuesday Tip | How to Become a Community Blog Author

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   This Week's Topic: How to Become a Community Blog Author We want YOU to be part of the community blog! Sharing your knowledge of Power Platform is an essential part of our community! Here's why:   It helps create a vibrant and dynamic community of makers who can learn from each other’s experiences and insights.It provides a platform for collaboration and innovation, where members can share their ideas and work together to develop new solutions.It helps promote Power Platform by showcasing its capabilities and real-world applications.It helps build trust and credibility in the community because you are providing valuable information and resources your fellow community members can use to improve their skills and knowledge. By sharing your knowledge of Power Platform in the community blog, you help us create a more engaged and informed community, better equipped to tackle complex challenges. To get started with blogging across the Power Platform communities, please visit the following links:   Power Apps: https://powerusers.microsoft.com/t5/Power-Apps-Community-Blog/bg-p/PowerAppsBlog Power Automate: https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog Copilot Studios: https://powerusers.microsoft.com/t5/Power-Virtual-Agents-Community/bg-p/PVACommunityBlogPower Pages: https://powerusers.microsoft.com/t5/Power-Pages-Community-Blog/bg-p/mpp_blog   When you follow the link, look for a button like the one below on the right rail of your community blog, and let us know you're interested. We can't wait to connect with you and help you get started. Thanks for being part of our incredible community--and thanks for becoming part of the community blog!  

June 2024 Community Newsletter

It's time for the June Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzcreativeopinionExpiscornovus Fubar AmikNived_NambiarPstork1OliverRodriguesmmbr1606ManishSolankifernandosilvaragavanrajanBCBuizerExpiscornovusrenatoromaoLucas001timlAlexEncodianViswavEmadBeshaiDBO_DVDeenujiUmiantaChrist0fGochixVishnuReddy1997citron-trucmandelaVishalJhaverieetuRoboJohanTprathyooanandm08VictorIvanidzenicoxrfm1964shashankbhidepaulbeck1 rpaa   LATEST NEWS Summer of Solutions 2024 The Summer of Solutions challenge kicked off this month - an amazing Microsoft Community initiative to win free tickets to the Power Platform Community Conferencethis September in Las Vegas. The challenge is NOW OPEN to all #PowerPlatform community members and will consist of four weekly entry periods until July 14th, 2024. Click the image below to find out more on how you can win free tickets to #PPCC24 by entering the Summer of Solutions TODAY!   Microsoft Customer Stories We're constantly working with an array of great businesses across the globe to assist them in taking advantage of the latest business applications technology. If you'd like to find out more about their low code journeys, click the image below to view our playlist of Customer Stories to discover how Accenture, Lumen Technologies, Cineplex, and many more, are streamlining their business processes with Microsoft Power Platform.     Microsoft Leap Program Have you heard of Microsoft Leap - a global program designed to recruit, develop, and upskill unconventional talent for careers in the tech space. Microsoft Leap organizes a number of pathways into the industry, including the recent "NFL Legend Cohort - Technical Program Management" run jointly with the NFL Player Care Foundation (PCF) who are dedicated to helping retired players improve their quality of life. Click the image below to find out more about the great day shared at the Redmond campus and be sure to visit the Microsoft Leap website to discover how this amazing initiative is helping re-launch the lives of countless individuals. www.leap.microsoft.com       UPCOMING EVENTS Biz Apps Partner Summit | Seattle | July 24-25 It's not long now until the Biz Apps Partner Summit, which takes place at the Hilton Bellevue in Seattle on July 24-25, 2024. This event is the perfect place to network, connect, and learn how to scale your Microsoft practice, drive profitable revenue, and dazzle your customers! There's a great selection of speakers, including the likes of Tom Patterson, Donald Kossmann Joseph Corigliano, Cecilia Flombaum, Peter Jensen, John Siefert, Becky Lymberis, Daniel Rippey, and many more. Click the image below to find out more and register today!     TechCon365 & Power Platform Conference | D.C. | August 12-16 Things are hotting up for the next TechCon365 & PWRCON Conference in Washington D.C. on August 12-16, 2024. Featuring the likes of Tamara Bredemus, Sunny Eltepu, Lindsay Shelton, Brian Alderman, Daniel Glenn, Julie Turner, Jim Novak, John White, Jason Himmelstein, Luc Labelle, Emily Mancini, MVP, UXMC, Fabian Williams, Emma Wiehe,and many more, this is the perfect event for those that are looking to gain invaluable insights from industry experts. Click the image below to grab your tickets today!     Power Platform Community Conference | Vegas | Sept. 18-20th Are you ready to come and join the fun in Las Vegas this September at PPCC24? This event is the perfect place to connect with fellow business applications enthusiasts and share your knowledge with the worldwide Microsoft Community. Now's your chance to hold all the aces. Just click the image below to find out more and we hope to see you go ALL-IN this September in Las Vegas!     For more events, click the image below to visit the Community Days website.  

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (2,483)