cancel
Showing results for 
Search instead for 
Did you mean: 
Reply

Create a new team from an email subject using power automate cloud flow

Hi,

 

New here and first post - please re-direct it if in wrong place.

 

I'm trying to create a new flow in Power Automate @PowerAutomate  that automates the creation of a new private MS Teams site related to an email subject when it's sent directly to me, I've managed to build out a simple flow to create the new team and it sends me a notification and test it successfully - All Good here. 

However I'm trying to create the team based on a specific part of the Subject line only -majority of which is from a templated email I receive but the "name" indicated in the subject line changes each time I get one of these emails and again this will be the new teams site name and I don't need all of subject line in full as the existing flow copies everything across.  There is no way for me to know what the team names will be in advance, I'll only know when the email is received. I can't seem to find a way to focus/pick out the do this - is it an expression (never used before) that will help here to remove all the rest of the text - again new and would appreciate any suggestions, Thanks!

3 ACCEPTED SOLUTIONS

Accepted Solutions

Dear @PowerPotential ,

in the "Compose-Length" action please put the following expression:

length(triggerOutputs()?['body/subject'])

MarconettiMarco_0-1661777278136.png

 

Please let me know if the issue is fixed.

 

If I have answered your question, please mark my post as Solved.

If you like my response, please give it a Thumbs Up.

 

I may not have all the answers, but I'm curious and passionate enough to keep looking for answers and to keep sharing them.

 

My blog site about Power Automate: https://powerautomatejoy.com/

 

BR,

Marco

 

View solution in original post

Hello @PowerPotential ,

so please follow these additional steps:

1. Add a "Compose" action providing this expression:

replace(outputs('Compose-GetName'),' ','')

MarconettiMarco_0-1661781217359.png

2. Add an "Apply to each" control, in the "Select an output from previous steps" field put the Attachments value grabbed from the trigger. Within the Apply to each loop add the following actions:

MarconettiMarco_1-1661781473326.png

3. Get attachments (V2):

MarconettiMarco_2-1661781498633.png

 

4. SharePoint Create file:

- Site address: put the custom value

MarconettiMarco_4-1661781571792.png

- Folder Path: type manually "Shared documents/General"

- File name: "Name" from the get attachments action

- File Content: "Content Bytes" from the get attachments action

MarconettiMarco_3-1661781525121.png

5. OneDrive "Create file":

- Folder Path: outputs from the "Compose-GetName" action

- File Name: "Name" from the get attachments action

- File Content: "Content Bytes" from the get attachments action

MarconettiMarco_5-1661781700616.png

 

Please let me know if the issue is fixed.

 

If I have answered your question, please mark my post as Solved.

If you like my response, please give it a Thumbs Up.

 

I may not have all the answers, but I'm curious and passionate enough to keep looking for answers and to keep sharing them.

 

My blog site about Power Automate: https://powerautomatejoy.com/

 

BR,

Marco

 

 

 

View solution in original post

Dear @PowerPotential ,

you should follow these additional steps:

1. Add a "Compose" action providing the following expression:

 

split(replace(triggerOutputs()?['body/toRecipients'],'MarcoMarconetti@powerautomatemark.onmicrosoft.com;', ''),';')

 

Please replace my email address with your

MarconettiMarco_0-1661840852121.png

2. Add a Teams member for each output got from the previous Compose action:

MarconettiMarco_4-1661841049049.png

 

Please let me know if the issue is fixed.

 

If I have answered your question, please mark my post as Solved.

If you like my response, please give it a Thumbs Up.

 

I may not have all the answers, but I'm curious and passionate enough to keep looking for answers and to keep sharing them.

 

My blog site about Power Automate: https://powerautomatejoy.com/

 

BR,

Marco

 

 

View solution in original post

19 REPLIES 19
MarconettiMarco
Super User
Super User

Hello @PowerPotential ,

indeed you don't already know which filters you want to apply. I mean, you don't know with which name, contained in the email subject, you'll have to generate the Teams site, right?

 

BR,

Marco

Hi Marco,

Thanks for your reply -  Yes, so for further background I receive a mostly templated email with the subject line something like "Confirmation of Resource - XXXXXXX"  where the XX's are the only bit that change in the subject line of each email that I receive  ( I never know what that will be in advance) and normally I'd be copying and pasting this manually into teams to create it (before discovering PA) -this part of XXX's is the bit I want to be the new teams name - the flow is currently just based on the below:

PowerPotential_0-1661766344349.png

- However the Teams Site is getting named the entire subject line "Confirmation of Resource - XXXXXXX"  which I understand the reason but is obviously not ideal - I'm not sure how I can get it to pick up on the XXX's only in the example and make that the team name instead? - is there a process/action that will allow me to either eliminate everything before xxx for example?
Thanks!

Hello @PowerPotential ,

if the email subject in most of cases is "standardized", let's follow these steps (in my case I've generated an instant flow, but the scenario can be applied to your):

1. Add a "Find text position" action:

- Text: your email subject;

- Search text: -

MarconettiMarco_0-1661768035088.png

2. Add a "Compose" action in which provide the following expression:

length(triggerBody()['text'])

instead of "triggerBody()['text']", please add the Subject value grabbed from the dynamic content;

MarconettiMarco_1-1661768086324.png

3. Add a "Substring" action:

- Text: your email subject;

- Starting Position: the text position value got from the "Find text position" action;

- Length: add the following expression:

sub(outputs('Compose-Length'), body('Find_text_position'))

MarconettiMarco_2-1661768175858.png

4. Add a "Compose" action and put the following expression:

substring(body('Substring'),2,sub(length(body('Substring')),2))

MarconettiMarco_3-1661768299716.png

Then, you'll be able to use the Compose outputs as the Teams site name.

 

Here my output:

MarconettiMarco_4-1661768343347.png

 

MarconettiMarco_5-1661768359537.png

 

Please let me know if the issue is fixed.

 

If I have answered your question, please mark my post as Solved.

If you like my response, please give it a Thumbs Up.

 

I may not have all the answers, but I'm curious and passionate enough to keep looking for answers and to keep sharing them.

 

My blog site about Power Automate: https://powerautomatejoy.com/

 

BR,

Marco

 

 

 

 

Hi @MarconettiMarco  - Thanks you for your very detailed reply!

I was working my way through your steps however I'm now getting an error message against the "Substring" requesting a valid reference: " - see screenshot below:

PowerPotential_3-1661770042362.png

It's probably an easy fix but being new I don't know what I don't know.. I've pasted in the expressions as you've advised in your reply however  I only used the subject input for step2 as you advised and Not the expression you pasted unless I've confused that part? See screenshot

 

Thanks for your help with this!

 

 

Yes @PowerPotential ,

you have to rename the "Compose" action in "Compose-Length".

 

Please let me know if the issue is fixed.

 

If I have answered your question, please mark my post as Solved.

If you like my response, please give it a Thumbs Up.

 

I may not have all the answers, but I'm curious and passionate enough to keep looking for answers and to keep sharing them.

 

My blog site about Power Automate: https://powerautomatejoy.com/

 

BR,

Marco

@MarconettiMarco  - I've redone the flow and repasted the expression you advised above but still getting the same error as above sadly - if you could please take a look?

On another point, as part of replacing the manual tasks - usually this templated email that I receive will also have a PowerPoint .pptx attached with a standardised name and alongside creating a MS team with the XXX name as above - I also have to download and save this file manually to OneDrive for business - after having to create a new folder to store it in with the original name taken from the email subject "XXX" as mentioned above -is this a possibility also and having them running in parallel when this email is received? 

Really appreciate your help! 😊

Hello @PowerPotential ,

please rename all the actions like those in my screenshots, so that the flow will run successfully.

In regards of the second point, you should be able, in the same flow, to read the pptx name and create another Teams site.

 

Please let me know if the issue is fixed.

 

If I have answered your question, please mark my post as Solved.

If you like my response, please give it a Thumbs Up.

 

I may not have all the answers, but I'm curious and passionate enough to keep looking for answers and to keep sharing them.

 

My blog site about Power Automate: https://powerautomatejoy.com/

 

BR,

Marco

@MarconettiMarco  - I've gone through all of your steps and renamed as you have and also pasted in exactly as you've laid out and sadly I'm getting issues!  Please see the following error below - it was originally 2 errors in the Compose sections but down to just 1 as below:
PowerPotential_0-1661775342937.png

- Also, regarding the other point in my previous message above regarding the PPT attachment within the templated email- its not a new teams site I need for this but instead can this also be saved to OneDrive for business in parallel- in a new folder called the same "XXX" name taken from the email subject as it will also be the new MS teams name taken from the "XXX" name from the same email subject?  Thank You.

Hello @PowerPotential ,

please share the Substring action in edit mode.

 

BR,

Marco

 PowerPotential_0-1661776814032.png

@MarconettiMarco- Please see above as requested - can I  also check against step 2 in your previous instructions about using the subject as Dynamic content instead of the expression? I've ran it a few times with the expressions and dynamic content also unless I've picked that up incorrectly also?

PowerPotential_1-1661777017019.png

 


Thanks!

Dear @PowerPotential ,

in the "Compose-Length" action please put the following expression:

length(triggerOutputs()?['body/subject'])

MarconettiMarco_0-1661777278136.png

 

Please let me know if the issue is fixed.

 

If I have answered your question, please mark my post as Solved.

If you like my response, please give it a Thumbs Up.

 

I may not have all the answers, but I'm curious and passionate enough to keep looking for answers and to keep sharing them.

 

My blog site about Power Automate: https://powerautomatejoy.com/

 

BR,

Marco

 

Hi @MarconettiMarco  - Thank you for spending so much time on this - I did that before but it's now working successfully!🙂

Following up on and regarding my second related point now if you don't mind -Regarding the second part is there functionality to also download /save the PPT attachment from the original templated email that is received to save it to OneDrive for business but within a folder with the same name of the newly created team from the flow so they match and also upload this same PPT to the files section of the newly created team also? A lot of these actions are for back up/audit  purposes I've been requested to action them in triplicate!!

Hello @PowerPotential ,

so please follow these additional steps:

1. Add a "Compose" action providing this expression:

replace(outputs('Compose-GetName'),' ','')

MarconettiMarco_0-1661781217359.png

2. Add an "Apply to each" control, in the "Select an output from previous steps" field put the Attachments value grabbed from the trigger. Within the Apply to each loop add the following actions:

MarconettiMarco_1-1661781473326.png

3. Get attachments (V2):

MarconettiMarco_2-1661781498633.png

 

4. SharePoint Create file:

- Site address: put the custom value

MarconettiMarco_4-1661781571792.png

- Folder Path: type manually "Shared documents/General"

- File name: "Name" from the get attachments action

- File Content: "Content Bytes" from the get attachments action

MarconettiMarco_3-1661781525121.png

5. OneDrive "Create file":

- Folder Path: outputs from the "Compose-GetName" action

- File Name: "Name" from the get attachments action

- File Content: "Content Bytes" from the get attachments action

MarconettiMarco_5-1661781700616.png

 

Please let me know if the issue is fixed.

 

If I have answered your question, please mark my post as Solved.

If you like my response, please give it a Thumbs Up.

 

I may not have all the answers, but I'm curious and passionate enough to keep looking for answers and to keep sharing them.

 

My blog site about Power Automate: https://powerautomatejoy.com/

 

BR,

Marco

 

 

 

@MarconettiMarco  Thanks very much - it works 😊

I just have one more thing related to this flow  please - if I may? I can ask it as a separate question if needed on the forum but the above thread is for context.
- With the new Team Site created from the template email- I'd like to add those who are in the "To" list (office 365 email) to be added to the newly created team automatically - I've found the following options:

PowerPotential_0-1661788988897.png

- This fails adding people as it stops as I'm one of the first email address listed in the email's "To list" and I'm already the teams owner by default - I don't know how to exclude my email address from attempted to be added to the new site and to old add everyone else in the list as non owners... I've already googled this with no luck sadly, if you'd be able to give any suggestions, that would be great! Thanks!😊

Dear @PowerPotential ,

you should follow these additional steps:

1. Add a "Compose" action providing the following expression:

 

split(replace(triggerOutputs()?['body/toRecipients'],'MarcoMarconetti@powerautomatemark.onmicrosoft.com;', ''),';')

 

Please replace my email address with your

MarconettiMarco_0-1661840852121.png

2. Add a Teams member for each output got from the previous Compose action:

MarconettiMarco_4-1661841049049.png

 

Please let me know if the issue is fixed.

 

If I have answered your question, please mark my post as Solved.

If you like my response, please give it a Thumbs Up.

 

I may not have all the answers, but I'm curious and passionate enough to keep looking for answers and to keep sharing them.

 

My blog site about Power Automate: https://powerautomatejoy.com/

 

BR,

Marco

 

 

Hi @MarconettiMarco 

 

Excuse the delayed reply but just to say it's fixed and all working great and already making a big difference so far! 🙂

If I wanted to share this entire flow with colleagues so they can replicate everything - this is possible but I believe they would need to individually go into each step where my email address /OneDrive folder list is and then edit it to reflect their email etc each time and it'll then run successfully for them also or is there a way to generalise it so that it can easily be shared/replicated?

Hi @MarconettiMarco  Hope you're well?

I've tried to improve this step in the flow - once the team member is added to the Newly created teams site that's  flow-generated from the email received in the previous steps created above - I'm wanting to post a message in the new teams General channel (from me) to welcome the team member on board - I've done some digging for the "get user profile V2" option but there is no option to get the user id of the person who was just added but dynamic content only shows the selection of new team id and the flow fails? - I've included screenshots below:

PowerPotential_0-1662371594661.pngPowerPotential_1-1662371625884.pngPowerPotential_2-1662371652471.png


I hope you could kindly share your expertise on a way around this please?

Thank You! 🙂

@MarconettiMarco 

Hi Marco - so this part of the flow is now unexpectantly failing - I'm trying to get the attachments from the email added to this teams site list whenever it's newly created: 

One drive part is working fine - no issues 🙂

 

I was hoping to take this a step further and each time the new teams site is created I wanted them to have a pre-set list of specific named folders on both one drive and the newly created teams site's "general files"section - with the .ppt attachment saved in 1 specific folder in both onedrive/teams files for example  - this is to be used as a template for each site/back up created on both onedrive/teams going forward - flow screenshot attached: 

PowerPotential_4-1662372456522.png

 

I'd really appreciate your help with this if you can please give me some guidance? 

 

Thank You! 🙂

Helpful resources

Announcements

Power Platform Connections - Episode 6 | March 23, 2023

Episode Six of Power Platform Connections sees David Warner and Hugo Bernier talk to talk to Business Applications MVP Shane Young, alongside the latest news, product updates, and community blogs.    Use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show!        Show schedule in this episode:  0:00 Cold Open 00:24 Show Intro 01:02 Shane Young Interview 22:00 Blogs & Articles 22:20 Integrate FullCalendar.io with Power Pages 23:50 Text Data 25:15 Zero to Hero Power Apps Saga 25:44 Parent Hub Association 26:33 Using Custom Values for OneNote Power Automate References​ 28:04 ​Dynamics Power Israel 28:44 Create Beautiful Canvas Apps in Dataverse for Teams ​ 30:36 Outro & Bloopers  Check out the blogs and articles featured in this week’s episode:   https://francomusso.com/integrate-fullcalendar-io-with-power-pages-from-json-basics-to-advanced-outp... @crmbizcoach https://yerawizardcat.com/text/ @YerAWizardCat www.fromzerotoheroes.com/mentorship ​ @thevictordantas https://www.expiscornovus.com/2023/03/16/parent-hub-association/ ​ @Expiscornovus https://lindsaytshelton.com/2023/03/15/the-painful-process-of-custom-values-for-onenote-power-automa... @lshelton_Tech https://never-stop-learning.de/create-beautiful-canvas-apps-in-dataverse-for-teams/ @MMe2K    Action requested: Feel free to provide feedback on how we can make our community more inclusive and diverse.  This episode premiered live on our YouTube at 12pm PST on Thursday 23rd March 2023.  Video series available at Power Platform Community YouTube channel.    Upcoming events:  Business Applications Launch – April 4th – Free and Virtual! M365 Conference - May 1-5th - Las Vegas Power Apps Developers Summit – May 19-20th - London European Power Platform conference – Jun. 20-22nd - Dublin Microsoft Power Platform Conference – Oct. 3-5th - Las Vegas  Join our Communities:  Power Apps Community Power Automate Community Power Virtual Agents Community Power Pages Community  If you’d like to hear from a specific community member in an upcoming recording and/or have specific questions for the Power Platform Connections team, please let us know. We will do our best to address all your requests or questions.   

Announcing | Super Users - 2023 Season 1

Super Users – 2023 Season 1    We are excited to kick off the Power Users Super User Program for 2023 - Season 1.  The Power Platform Super Users have done an amazing job in keeping the Power Platform communities helpful, accurate and responsive. We would like to send these amazing folks a big THANK YOU for their efforts.      Super User Season 1 | Contributions July 1, 2022 – December 31, 2022  Super User Season 2 | Contributions January 1, 2023 – June 30, 2023    Curious what a Super User is? Super Users are especially active community members who are eager to help others with their community questions. There are 2 Super User seasons in a year, and we monitor the community for new potential Super Users at the end of each season. Super Users are recognized in the community with both a rank name and icon next to their username, and a seasonal badge on their profile.    Power Apps  Power Automate  Power Virtual Agents  Power Pages  Pstork1*  Pstork1*  Pstork1*  OliverRodrigues  BCBuizer  Expiscornovus*  Expiscornovus*  ragavanrajan  AhmedSalih  grantjenkins  renatoromao    Mira_Ghaly*  Mira_Ghaly*      Sundeep_Malik*  Sundeep_Malik*      SudeepGhatakNZ*  SudeepGhatakNZ*      StretchFredrik*  StretchFredrik*      365-Assist*  365-Assist*      cha_cha  ekarim2020      timl  Hardesh15      iAm_ManCat  annajhaveri      SebS  Rhiassuring      LaurensM  abm      TheRobRush  Ankesh_49      WiZey  lbendlin      Nogueira1306  Kaif_Siddique      victorcp  RobElliott      dpoggemann  srduval      SBax  CFernandes      Roverandom  schwibach      Akser  CraigStewart      PowerRanger  MichaelAnnis      subsguts  David_MA      EricRegnier  edgonzales      zmansuri  GeorgiosG      ChrisPiasecki  ryule      AmDev  fchopo      phipps0218  tom_riha      theapurva  takolota     Akash17  momlo     BCLS776  Shuvam-rpa     rampprakash   ScottShearer     Rusk   ChristianAbata     cchannon   Koen5     a33ik        AaronKnox        Matren        Alex_10        Jeff_Thorpe        poweractivate        Ramole        DianaBirkelbach        DavidZoon        AJ_Z        PriyankaGeethik        BrianS        StalinPonnusamy        HamidBee        CNT        Anonymous_Hippo        Anchov        KeithAtherton        alaabitar        Tolu_Victor        KRider        sperry1625        IPC_ahaas      zuurg     rubin_boer     cwebb365       If an * is at the end of a user's name this means they are a Multi Super User, in more than one community. Please note this is not the final list, as we are pending a few acceptances.  Once they are received the list will be updated. 

Microsoft Power Platform | March 2023 Newsletter

Welcome to our March 2023 Newsletter, where we'll be highlighting the great work of our members within our Biz Apps communities, alongside the latest news, video releases, and upcoming events. If you're new to the community, be sure to subscribe to the News & Announcements and stay up to date with the latest news from our ever-growing membership network who find real "Power in the Community".        LATEST NEWS Power Platform Connections Check out Episode Five of Power Platform Connections, as David Warner II and Hugo Bernier chat with #PowerAutomate Vice President, Stephen Siciliano, alongside reviewing out the great work of Vesa Juvonen, Waldek Mastykarz, Maximilian Müller, Kristine Kolodziejski, Danish Naglekar, Cat Schneider, Victor Dantas, and many more.       Use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show!   Did you miss an episode?  Catch up now in the Community Connections Galleries Power Apps, Power Automate, Power Virtual Agents, Power Pages     Power Platform leading a new era of AI-generated low-code development.   **HOT OFF THE PRESS** Fantastic piece here by Charles Lamanna on how we're reinventing software development with Copilot in Power Platform to help you can build apps, flows, and bots with just a simple description! Click here to see the Product Blog         Copilot for Power Apps - Power CAT Live To follow on from Charles' blog, check out #PowerCATLive as Phil Topness gives Clay Wesener Wesner a tour of the capabilities of Copilot in Power Apps.           UPCOMING EVENTS   Modern Workplace Conference Check out the Power Platform and Microsoft 365 Modern Workplace Conference that returns face-to-face at the Espace St Martin in Paris on 27-28th March. The #MWCP23 will feature a wide range of expert speakers, including Nadia Yahiaoui, Amanda Sterner, Pierre-Henri, Chirag Patel, Chris Hoard, Edyta Gorzoń, Erika Beaumier, Estelle Auberix, Femke Cornelissen, Frank POIREAU, Gaëlle Moreau, Gilles Pommier, Ilya Fainberg, Julie Ecolivet, Mai-Lynn Lien, Marijn Somers, Merethe Stave, Nikki Chapple, Patrick Guimonet, Penda Sow, Pieter Op De Beéck, Rémi Riche, Robin Doudoux, Stéphanie Delcroix, Yves Habersaat and many more.  Click here to find out more and register today!     Business Applications Launch 2023 Join us on Tuesday 4th April 2023 for an in-depth look into the latest updates across Microsoft Power Platform and Microsoft Dynamics 365 that are helping businesses overcome their biggest challenges today. Find out about new features, capabilities, and best practices for connecting data to deliver exceptional customer experiences, collaborating and creating using AI-powered capabilities, driving productivity with automation, and building future growth with today’s leading technology. Click Here to Register Today!       Power Platform Conference 2023 We are so excited to see you for the Microsoft Power Platform Conference in Las Vegas October 3-5th, 2023! But first, let's take a look below at some fun moments from MPPC 2022 in Orlando Florida. 2023 sees guest speakers such as Charles Lamanna, Heather Cook, Julie Strauss, Nirav Shah, Ryan Cunningham, Sangya Singh, and many more taking part, so why not click the link below to register for the #PowerPlatformConf today! Vegas, baby! Click Here to Register Today!      COMMUNITY HIGHLIGHTS Check out our top Super and Community Users reaching new levels!  These hardworking members are posting, answering questions, kudos, and providing top solutions in their communities.   Power Apps:  Super Users:  @WarrenBelz  |  @iAm_ManCat  Community Users: @LaurensM | @Rusk | @RJM07    Power Automate:   Super Users: @abm  | @Expiscornovus | @RobElliott  Community Users:  @grantjenkins | @Chriddle    Power Virtual Agents:   Super Users: @Expiscornovus | @Pstork1  Community Users: @MisterBates | @Jupyter123 | Kunal K   Power Pages: Super Users:  @OliverRodriguesOliverRodrigues | @Mira_Ghaly  Community Users: @FubarFubar | @ianwukianwuk  LATEST PRODUCT BLOG ARTICLES  Power Apps Community Blog  Power Automate Community Blog  Power Virtual Agents Community Blog  Power Pages Community Blog  Check out 'Using the Community' for more helpful tips and information:  Power Apps, Power Automate, Power Virtual Agents, Power Pages 

Register now for the Business Applications Launch Event | Tuesday, April 4, 2023

Join us for an in-depth look into the latest updates across Microsoft Dynamics 365 and Microsoft Power Platform that are helping businesses overcome their biggest challenges today.   Find out about new features, capabilities, and best practices for connecting data to deliver exceptional customer experiences, collaborating, and creating using AI-powered capabilities, driving productivity with automation—and building towards future growth with today’s leading technology.   Microsoft leaders and experts will guide you through the full 2023 release wave 1 and how these advancements will help you: Expand visibility, reduce time, and enhance creativity in your departments and teams with unified, AI-powered capabilities.Empower your employees to focus on revenue-generating tasks while automating repetitive tasks.Connect people, data, and processes across your organization with modern collaboration tools.Innovate without limits using the latest in low-code development, including new GPT-powered capabilities.    Click Here to Register Today!    

Check out the new Power Platform Communities Front Door Experience!

We are excited to share the ‘Power Platform Communities Front Door’ experience with you!   Front Door brings together content from all the Power Platform communities into a single place for our community members, customers and low-code, no-code enthusiasts to learn, share and engage with peers, advocates, community program managers and our product team members. There are a host of features and new capabilities now available on Power Platform Communities Front Door to make content more discoverable for all power product community users which includes ForumsUser GroupsEventsCommunity highlightsCommunity by numbersLinks to all communities Users can see top discussions from across all the Power Platform communities and easily navigate to the latest or trending posts for further interaction. Additionally, they can filter to individual products as well.   Users can filter and browse the user group events from all power platform products with feature parity to existing community user group experience and added filtering capabilities.     Users can now explore user groups on the Power Platform Front Door landing page with capability to view all products in Power Platform.      Explore Power Platform Communities Front Door today. Visit Power Platform Community Front door to easily navigate to the different product communities, view a roll up of user groups, events and forums.

Microsoft Power Platform Conference | Registration Open | Oct. 3-5 2023

We are so excited to see you for the Microsoft Power Platform Conference in Las Vegas October 3-5 2023! But first, let's take a look back at some fun moments and the best community in tech from MPPC 2022 in Orlando, Florida.   Featuring guest speakers such as Charles Lamanna, Heather Cook, Julie Strauss, Nirav Shah, Ryan Cunningham, Sangya Singh, Stephen Siciliano, Hugo Bernier and many more.   Register today: https://www.powerplatformconf.com/   

Users online (2,296)