cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Priya216
Helper II
Helper II

Create and modify list item - avoid infinite loops

I am still struggling with this trigger.

 

The scenario is - I have created a trips calendar which teachers add trips for their students. The trip needs to be approved by 2 people. Sometimes the 1st approver will reject the trip as the trip requires more information. The teacher then amends the trip by adding more information and this then needs to trigger a workflow to do the same thing as before but now on modify. 

 

I am unsure if I need to use 2 flows for this list or use 1.

 

I am working with the following triggers :

"When an item is created" + "When an item or file is modified" - 2 workflows

"When an item is created or modified" - 1 workflow

 

Using the 2 workflows I find the workflows trigger one after the other and then its in a infinite loop as the workflow is doing an approval and update.

 

Using the 1 workflow this just ends up in an infinite loop too.

I have looked into trigger conditions and using a conditional column and still the infinite loop still keeps occurring.

 

I rather use 2 workflows one form creating the item and other for modifying the item but how do I stop them triggering one after the other continuously and how do I avoid these infinite loops because I I do need to update the trip.

 

How do I do this ?

 

Help will be much appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you for the prompt response

 

I will share my workflows for a simple approval and update as I am trying to understand the logic behind these trigger conditions

 

Here is a snip of a create item in a list 

 

Priya216_0-1623412742541.png

 

Then I want to update that item so here is the workflow

 

Priya216_0-1623412953763.png

 

The trigger condition i have placed in the settings is as follows 

@not(equals(triggerbody()?['Editor']?['Email'],'PowerAutomate@ncclondon.ac.uk'))

 

I am using a service account called powerautomate and this uses the connections to sharepoint, mail and approvals.

 

What am I doing wrong ?

 

Thanks

Priya

 

View solution in original post

20 REPLIES 20
annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  trigger conditions is a good way to avoid infinite loops, what trigger condition had you configured which was not working, can you share?

 

Also one way to avoid infinite look is as follows:

1. The update that you are doing in sharepoint item, that action will have connection, see what account is used in that connection, its good idea to use service account in connection

2. Put the trigger condition that if  Editor (modified by) is not service account email (so with this condition when update to item is made by service account the flow will not be triggered.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you for the prompt response

 

I will share my workflows for a simple approval and update as I am trying to understand the logic behind these trigger conditions

 

Here is a snip of a create item in a list 

 

Priya216_0-1623412742541.png

 

Then I want to update that item so here is the workflow

 

Priya216_0-1623412953763.png

 

The trigger condition i have placed in the settings is as follows 

@not(equals(triggerbody()?['Editor']?['Email'],'PowerAutomate@ncclondon.ac.uk'))

 

I am using a service account called powerautomate and this uses the connections to sharepoint, mail and approvals.

 

What am I doing wrong ?

 

Thanks

Priya

 

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  in those two flows, are you doing update item?

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri - Yes I am updating the item 

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  thanks for the details, your trigger condition looks correct, can you double check if the update item uses the service account which you have used in the trigger condition.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri - It wasn't using it but now I have changed it to using the service account. It is working how I expect I it to. But I am now going to add the trigger conditions to real example and see if it works.

Priya216
Helper II
Helper II

My real life example has failed. 

I need time out from this now, can I get back to you on Monday with my findings. 

I appreciate your help, I feel like I am getting somewhere.

 

Have a nice weekend. Speak to you Monday.

Priya216
Helper II
Helper II

@annajhaveri 

 

I hope your well and good. 

I have tried using the trigger conditions and using the trigger "When an item or file is modified" to modify the item in question in my example.

 

I have hit an error. Would you know what the below means

 

The execution of template action 'Apply_to_each' failed: the result of the evaluation of 'foreach' expression '@triggerBody()?['value']' is of type 'Null'. The result must be a valid array.

Priya216
Helper II
Helper II

@annajhaveri

 

Here is a screenshot of my flow

 

Priya216_0-1623745341490.png

 

 

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  any reason why you have apply to each in your flow? if apply to each has @triggerBody()?['value'] then it is incorrect, i would like to understand use of apply to each.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri the flow automatically added that into the flow to say it was needed. I didn't add that in.

As the flow added it in I assumed it required it.

 

Shall I remove the apply to each ?

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  okay so if flow automatically added it, it must be because of some dynamic content value you are trying to use in Approval or condition action, can you expand both actions inside apply to each and share the screenshot? Also can you please share data type of columns of list that you are using in the flow?

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thanks for your prompt response

 

Here is the 1st apply to each snip

Priya216_0-1623839142702.png

 

This is the 2nd approval

 

Priya216_1-1623839208344.png

 

The data types of the columns I am using in the flow are for the following columns Date/Time, Single line of text, Multiple line of text.

 

Priya216_2-1623839345910.png

 

Would it be useful if I removed the apply to each and see what happens ? It doesn't make sense to me having that there. In my demo I didn't add that in and that worked successfully.

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  yes you can try removing Apply to each, as flow as added automatically then it may create issue, but still you can try.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

I have recreated the workflow, with no apply to each added in.

The flow has successfully saved.

I have run my flow as shown in the snips above and the flow requires 2 approvals.

The flow seems to have hit a glitch. I am approving the approval to run the flow but the flow inputs the approval as 'false' and the flow completes. I have approved the flow so it should follow on to the 2nd approval stage but it doesn't. 

Would you know why this could be happening ?

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  for approval 1 do you have first to respond approval type? In flow run can you check what it the value of outcome?

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you for helping me., I do appreciate all your help. Been working on this flow for 2 weeks now. 

 

Here is the snip for the 1st approval, as you can see I am using 'Start and Wait for an Approval' and the condition is set to the response of the approval which is 'Approve' but the flow inputs it as False (see 2nd snip).

I don't understand why its doing that.

 

Priya216_0-1623848114627.png

 

Priya216_1-1623848275486.png

 

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  Currently you are checking value of responses, instead please check value of outcome as shown in below condition. Also in flow run, for approval action, see what is there in output to know whats going on.

annajhaveri_0-1623848710429.png

 

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you so much Anna - I can't believe I missed that vital step, instead of outcome I had responses.

The flow is now working successfully and have used it in a real example and its been success.

 

I have gone through so many hurdles to get this 'modify' trigger to work. Finally it was the Trigger conditions you said should work and it stopped the infinite loops.

 

Thank you once again and helping me out today. 

 

kind regards

Priya

Helpful resources

Announcements

Celebrating the May Super User of the Month: Laurens Martens

  @LaurensM  is an exceptional contributor to the Power Platform Community. Super Users like Laurens inspire others through their example, encouragement, and active participation. We are excited to celebrated Laurens as our Super User of the Month for May 2024.   Consistent Engagement:  He consistently engages with the community by answering forum questions, sharing insights, and providing solutions. Laurens dedication helps other users find answers and overcome challenges.   Community Expertise: As a Super User, Laurens plays a crucial role in maintaining a knowledge sharing environment. Always ensuring a positive experience for everyone.   Leadership: He shares valuable insights on community growth, engagement, and future trends. Their contributions help shape the Power Platform Community.   Congratulations, Laurens Martens, for your outstanding work! Keep inspiring others and making a difference in the community!   Keep up the fantastic work!        

Check out the Copilot Studio Cookbook today!

We are excited to announce our new Copilot Cookbook Gallery in the Copilot Studio Community. We can't wait for you to share your expertise and your experience!    Join us for an amazing opportunity where you'll be one of the first to contribute to the Copilot Cookbook—your ultimate guide to mastering Microsoft Copilot. Whether you're seeking inspiration or grappling with a challenge while crafting apps, you probably already know that Copilot Cookbook is your reliable assistant, offering a wealth of tips and tricks at your fingertips--and we want you to add your expertise. What can you "cook" up?   Click this link to get started: https://aka.ms/CS_Copilot_Cookbook_Gallery   Don't miss out on this exclusive opportunity to be one of the first in the Community to share your app creation journey with Copilot. We'll be announcing a Cookbook Challenge very soon and want to make sure you one of the first "cooks" in the kitchen.   Don't miss your moment--start submitting in the Copilot Cookbook Gallery today!     Thank you,  Engagement Team

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Check Out the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community.  We can't wait to see what you "cook" up!    

Welcome to the Power Automate Community

You are now a part of a fast-growing vibrant group of peers and industry experts who are here to network, share knowledge, and even have a little fun.   Now that you are a member, you can enjoy the following resources:   Welcome to the Community   News & Announcements: The is your place to get all the latest news around community events and announcements. This is where we share with the community what is going on and how to participate.  Be sure to subscribe to this board and not miss an announcement.   Get Help with Power Automate Forums: If you're looking for support with any part of Power Automate, our forums are the place to go. From General Power Automate forums to Using Connectors, Building Flows and Using Flows.  You will find thousands of technical professionals, and Super Users with years of experience who are ready and eager to answer your questions. You now have the ability to post, reply and give "kudos" on the Power Automate community forums. Make sure you conduct a quick search before creating a new post because your question may have already been asked and answered. Galleries: The galleries are full of content and can assist you with information on creating a flow in our Webinars and Video Gallery, and the ability to share the flows you have created in the Power Automate Cookbook.  Stay connected with the Community Connections & How-To Videos from the Microsoft Community Team. Check out the awesome content being shared there today.   Power Automate Community Blog: Over the years, more than 700 Power Automate Community Blog articles have been written and published by our thriving community. Our community members have learned some excellent tips and have keen insights on the future of process automation. In the Power Automate Community Blog, you can read the latest Power Automate-related posts from our community blog authors around the world. Let us know if you'd like to become an author and contribute your own writing — everything Power Automate-related is welcome.   Community Support: Check out and learn more about Using the Community for tips & tricks. Let us know in the Community Feedback  board if you have any questions or comments about your community experience. Again, we are so excited to welcome you to the Microsoft Power Automate community family. Whether you are brand new to the world of process automation or you are a seasoned Power Automate veteran - our goal is to shape the community to be your 'go to' for support, networking, education, inspiration and encouragement as we enjoy this adventure together.     Power Automate Community Team

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Users online (5,109)