cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Priya216
Helper II
Helper II

Create and modify list item - avoid infinite loops

I am still struggling with this trigger.

 

The scenario is - I have created a trips calendar which teachers add trips for their students. The trip needs to be approved by 2 people. Sometimes the 1st approver will reject the trip as the trip requires more information. The teacher then amends the trip by adding more information and this then needs to trigger a workflow to do the same thing as before but now on modify. 

 

I am unsure if I need to use 2 flows for this list or use 1.

 

I am working with the following triggers :

"When an item is created" + "When an item or file is modified" - 2 workflows

"When an item is created or modified" - 1 workflow

 

Using the 2 workflows I find the workflows trigger one after the other and then its in a infinite loop as the workflow is doing an approval and update.

 

Using the 1 workflow this just ends up in an infinite loop too.

I have looked into trigger conditions and using a conditional column and still the infinite loop still keeps occurring.

 

I rather use 2 workflows one form creating the item and other for modifying the item but how do I stop them triggering one after the other continuously and how do I avoid these infinite loops because I I do need to update the trip.

 

How do I do this ?

 

Help will be much appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you for the prompt response

 

I will share my workflows for a simple approval and update as I am trying to understand the logic behind these trigger conditions

 

Here is a snip of a create item in a list 

 

Priya216_0-1623412742541.png

 

Then I want to update that item so here is the workflow

 

Priya216_0-1623412953763.png

 

The trigger condition i have placed in the settings is as follows 

@not(equals(triggerbody()?['Editor']?['Email'],'PowerAutomate@ncclondon.ac.uk'))

 

I am using a service account called powerautomate and this uses the connections to sharepoint, mail and approvals.

 

What am I doing wrong ?

 

Thanks

Priya

 

View solution in original post

20 REPLIES 20
annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  trigger conditions is a good way to avoid infinite loops, what trigger condition had you configured which was not working, can you share?

 

Also one way to avoid infinite look is as follows:

1. The update that you are doing in sharepoint item, that action will have connection, see what account is used in that connection, its good idea to use service account in connection

2. Put the trigger condition that if  Editor (modified by) is not service account email (so with this condition when update to item is made by service account the flow will not be triggered.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you for the prompt response

 

I will share my workflows for a simple approval and update as I am trying to understand the logic behind these trigger conditions

 

Here is a snip of a create item in a list 

 

Priya216_0-1623412742541.png

 

Then I want to update that item so here is the workflow

 

Priya216_0-1623412953763.png

 

The trigger condition i have placed in the settings is as follows 

@not(equals(triggerbody()?['Editor']?['Email'],'PowerAutomate@ncclondon.ac.uk'))

 

I am using a service account called powerautomate and this uses the connections to sharepoint, mail and approvals.

 

What am I doing wrong ?

 

Thanks

Priya

 

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  in those two flows, are you doing update item?

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri - Yes I am updating the item 

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  thanks for the details, your trigger condition looks correct, can you double check if the update item uses the service account which you have used in the trigger condition.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri - It wasn't using it but now I have changed it to using the service account. It is working how I expect I it to. But I am now going to add the trigger conditions to real example and see if it works.

Priya216
Helper II
Helper II

My real life example has failed. 

I need time out from this now, can I get back to you on Monday with my findings. 

I appreciate your help, I feel like I am getting somewhere.

 

Have a nice weekend. Speak to you Monday.

Priya216
Helper II
Helper II

@annajhaveri 

 

I hope your well and good. 

I have tried using the trigger conditions and using the trigger "When an item or file is modified" to modify the item in question in my example.

 

I have hit an error. Would you know what the below means

 

The execution of template action 'Apply_to_each' failed: the result of the evaluation of 'foreach' expression '@triggerBody()?['value']' is of type 'Null'. The result must be a valid array.

Priya216
Helper II
Helper II

@annajhaveri

 

Here is a screenshot of my flow

 

Priya216_0-1623745341490.png

 

 

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  any reason why you have apply to each in your flow? if apply to each has @triggerBody()?['value'] then it is incorrect, i would like to understand use of apply to each.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri the flow automatically added that into the flow to say it was needed. I didn't add that in.

As the flow added it in I assumed it required it.

 

Shall I remove the apply to each ?

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  okay so if flow automatically added it, it must be because of some dynamic content value you are trying to use in Approval or condition action, can you expand both actions inside apply to each and share the screenshot? Also can you please share data type of columns of list that you are using in the flow?

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thanks for your prompt response

 

Here is the 1st apply to each snip

Priya216_0-1623839142702.png

 

This is the 2nd approval

 

Priya216_1-1623839208344.png

 

The data types of the columns I am using in the flow are for the following columns Date/Time, Single line of text, Multiple line of text.

 

Priya216_2-1623839345910.png

 

Would it be useful if I removed the apply to each and see what happens ? It doesn't make sense to me having that there. In my demo I didn't add that in and that worked successfully.

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  yes you can try removing Apply to each, as flow as added automatically then it may create issue, but still you can try.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

I have recreated the workflow, with no apply to each added in.

The flow has successfully saved.

I have run my flow as shown in the snips above and the flow requires 2 approvals.

The flow seems to have hit a glitch. I am approving the approval to run the flow but the flow inputs the approval as 'false' and the flow completes. I have approved the flow so it should follow on to the 2nd approval stage but it doesn't. 

Would you know why this could be happening ?

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  for approval 1 do you have first to respond approval type? In flow run can you check what it the value of outcome?

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you for helping me., I do appreciate all your help. Been working on this flow for 2 weeks now. 

 

Here is the snip for the 1st approval, as you can see I am using 'Start and Wait for an Approval' and the condition is set to the response of the approval which is 'Approve' but the flow inputs it as False (see 2nd snip).

I don't understand why its doing that.

 

Priya216_0-1623848114627.png

 

Priya216_1-1623848275486.png

 

annajhaveri
Most Valuable Professional
Most Valuable Professional

@Priya216  Currently you are checking value of responses, instead please check value of outcome as shown in below condition. Also in flow run, for approval action, see what is there in output to know whats going on.

annajhaveri_0-1623848710429.png

 

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you so much Anna - I can't believe I missed that vital step, instead of outcome I had responses.

The flow is now working successfully and have used it in a real example and its been success.

 

I have gone through so many hurdles to get this 'modify' trigger to work. Finally it was the Trigger conditions you said should work and it stopped the infinite loops.

 

Thank you once again and helping me out today. 

 

kind regards

Priya

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.    👉Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS   Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!   Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!       Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!   UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!   European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!     Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!     For more events, click the image below to visit the Microsoft Community Days website.      

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Users online (3,258)