cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Priya216
Helper II
Helper II

Create and modify list item - avoid infinite loops

I am still struggling with this trigger.

 

The scenario is - I have created a trips calendar which teachers add trips for their students. The trip needs to be approved by 2 people. Sometimes the 1st approver will reject the trip as the trip requires more information. The teacher then amends the trip by adding more information and this then needs to trigger a workflow to do the same thing as before but now on modify. 

 

I am unsure if I need to use 2 flows for this list or use 1.

 

I am working with the following triggers :

"When an item is created" + "When an item or file is modified" - 2 workflows

"When an item is created or modified" - 1 workflow

 

Using the 2 workflows I find the workflows trigger one after the other and then its in a infinite loop as the workflow is doing an approval and update.

 

Using the 1 workflow this just ends up in an infinite loop too.

I have looked into trigger conditions and using a conditional column and still the infinite loop still keeps occurring.

 

I rather use 2 workflows one form creating the item and other for modifying the item but how do I stop them triggering one after the other continuously and how do I avoid these infinite loops because I I do need to update the trip.

 

How do I do this ?

 

Help will be much appreciated.

1 ACCEPTED SOLUTION

Accepted Solutions
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you for the prompt response

 

I will share my workflows for a simple approval and update as I am trying to understand the logic behind these trigger conditions

 

Here is a snip of a create item in a list 

 

Priya216_0-1623412742541.png

 

Then I want to update that item so here is the workflow

 

Priya216_0-1623412953763.png

 

The trigger condition i have placed in the settings is as follows 

@not(equals(triggerbody()?['Editor']?['Email'],'PowerAutomate@ncclondon.ac.uk'))

 

I am using a service account called powerautomate and this uses the connections to sharepoint, mail and approvals.

 

What am I doing wrong ?

 

Thanks

Priya

 

View solution in original post

20 REPLIES 20
annajhaveri
Community Champion
Community Champion

@Priya216  trigger conditions is a good way to avoid infinite loops, what trigger condition had you configured which was not working, can you share?

 

Also one way to avoid infinite look is as follows:

1. The update that you are doing in sharepoint item, that action will have connection, see what account is used in that connection, its good idea to use service account in connection

2. Put the trigger condition that if  Editor (modified by) is not service account email (so with this condition when update to item is made by service account the flow will not be triggered.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you for the prompt response

 

I will share my workflows for a simple approval and update as I am trying to understand the logic behind these trigger conditions

 

Here is a snip of a create item in a list 

 

Priya216_0-1623412742541.png

 

Then I want to update that item so here is the workflow

 

Priya216_0-1623412953763.png

 

The trigger condition i have placed in the settings is as follows 

@not(equals(triggerbody()?['Editor']?['Email'],'PowerAutomate@ncclondon.ac.uk'))

 

I am using a service account called powerautomate and this uses the connections to sharepoint, mail and approvals.

 

What am I doing wrong ?

 

Thanks

Priya

 

@Priya216  in those two flows, are you doing update item?

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri - Yes I am updating the item 

@Priya216  thanks for the details, your trigger condition looks correct, can you double check if the update item uses the service account which you have used in the trigger condition.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri - It wasn't using it but now I have changed it to using the service account. It is working how I expect I it to. But I am now going to add the trigger conditions to real example and see if it works.

Priya216
Helper II
Helper II

My real life example has failed. 

I need time out from this now, can I get back to you on Monday with my findings. 

I appreciate your help, I feel like I am getting somewhere.

 

Have a nice weekend. Speak to you Monday.

Priya216
Helper II
Helper II

@annajhaveri 

 

I hope your well and good. 

I have tried using the trigger conditions and using the trigger "When an item or file is modified" to modify the item in question in my example.

 

I have hit an error. Would you know what the below means

 

The execution of template action 'Apply_to_each' failed: the result of the evaluation of 'foreach' expression '@triggerBody()?['value']' is of type 'Null'. The result must be a valid array.

Priya216
Helper II
Helper II

@annajhaveri

 

Here is a screenshot of my flow

 

Priya216_0-1623745341490.png

 

 

@Priya216  any reason why you have apply to each in your flow? if apply to each has @triggerBody()?['value'] then it is incorrect, i would like to understand use of apply to each.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri the flow automatically added that into the flow to say it was needed. I didn't add that in.

As the flow added it in I assumed it required it.

 

Shall I remove the apply to each ?

@Priya216  okay so if flow automatically added it, it must be because of some dynamic content value you are trying to use in Approval or condition action, can you expand both actions inside apply to each and share the screenshot? Also can you please share data type of columns of list that you are using in the flow?

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thanks for your prompt response

 

Here is the 1st apply to each snip

Priya216_0-1623839142702.png

 

This is the 2nd approval

 

Priya216_1-1623839208344.png

 

The data types of the columns I am using in the flow are for the following columns Date/Time, Single line of text, Multiple line of text.

 

Priya216_2-1623839345910.png

 

Would it be useful if I removed the apply to each and see what happens ? It doesn't make sense to me having that there. In my demo I didn't add that in and that worked successfully.

@Priya216  yes you can try removing Apply to each, as flow as added automatically then it may create issue, but still you can try.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

I have recreated the workflow, with no apply to each added in.

The flow has successfully saved.

I have run my flow as shown in the snips above and the flow requires 2 approvals.

The flow seems to have hit a glitch. I am approving the approval to run the flow but the flow inputs the approval as 'false' and the flow completes. I have approved the flow so it should follow on to the 2nd approval stage but it doesn't. 

Would you know why this could be happening ?

@Priya216  for approval 1 do you have first to respond approval type? In flow run can you check what it the value of outcome?

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you for helping me., I do appreciate all your help. Been working on this flow for 2 weeks now. 

 

Here is the snip for the 1st approval, as you can see I am using 'Start and Wait for an Approval' and the condition is set to the response of the approval which is 'Approve' but the flow inputs it as False (see 2nd snip).

I don't understand why its doing that.

 

Priya216_0-1623848114627.png

 

Priya216_1-1623848275486.png

 

@Priya216  Currently you are checking value of responses, instead please check value of outcome as shown in below condition. Also in flow run, for approval action, see what is there in output to know whats going on.

annajhaveri_0-1623848710429.png

 

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Priya216
Helper II
Helper II

@annajhaveri 

 

Thank you so much Anna - I can't believe I missed that vital step, instead of outcome I had responses.

The flow is now working successfully and have used it in a real example and its been success.

 

I have gone through so many hurdles to get this 'modify' trigger to work. Finally it was the Trigger conditions you said should work and it stopped the infinite loops.

 

Thank you once again and helping me out today. 

 

kind regards

Priya

Helpful resources

Announcements

Power Platform Connections - Episode 7 | March 30, 2023

Episode Seven of Power Platform Connections sees David Warner and Hugo Bernier talk to Dian Taylor, alongside the latest news, product reviews, and community blogs.     Use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show.  

Announcing | Super Users - 2023 Season 1

Super Users – 2023 Season 1    We are excited to kick off the Power Users Super User Program for 2023 - Season 1.  The Power Platform Super Users have done an amazing job in keeping the Power Platform communities helpful, accurate and responsive. We would like to send these amazing folks a big THANK YOU for their efforts.      Super User Season 1 | Contributions July 1, 2022 – December 31, 2022  Super User Season 2 | Contributions January 1, 2023 – June 30, 2023    Curious what a Super User is? Super Users are especially active community members who are eager to help others with their community questions. There are 2 Super User seasons in a year, and we monitor the community for new potential Super Users at the end of each season. Super Users are recognized in the community with both a rank name and icon next to their username, and a seasonal badge on their profile.  Power Apps  Power Automate  Power Virtual Agents  Power Pages  Pstork1*  Pstork1*  Pstork1*  OliverRodrigues  BCBuizer  Expiscornovus*  Expiscornovus*  ragavanrajan  AhmedSalih  grantjenkins  renatoromao    Mira_Ghaly*  Mira_Ghaly*      Sundeep_Malik*  Sundeep_Malik*      SudeepGhatakNZ*  SudeepGhatakNZ*      StretchFredrik*  StretchFredrik*      365-Assist*  365-Assist*      cha_cha  ekarim2020      timl  Hardesh15      iAm_ManCat  annajhaveri      SebS  Rhiassuring      LaurensM  abm      TheRobRush  Ankesh_49      WiZey  lbendlin      Nogueira1306  Kaif_Siddique      victorcp  RobElliott      dpoggemann  srduval      SBax  CFernandes      Roverandom  schwibach      Akser  CraigStewart      PowerRanger  MichaelAnnis      subsguts  David_MA      EricRegnier  edgonzales      zmansuri  GeorgiosG      ChrisPiasecki  ryule      AmDev  fchopo      phipps0218  tom_riha      theapurva  takolota     Akash17  momlo     BCLS776  Shuvam-rpa     rampprakash  ScottShearer     Rusk  ChristianAbata     cchannon  Koen5     a33ik  Heartholme     AaronKnox  okeks      Matren   David_MA     Alex_10        Jeff_Thorpe        poweractivate        Ramole        DianaBirkelbach        DavidZoon        AJ_Z        PriyankaGeethik        BrianS        StalinPonnusamy        HamidBee        CNT        Anonymous_Hippo        Anchov        KeithAtherton        alaabitar        Tolu_Victor        KRider        sperry1625        IPC_ahaas      zuurg    rubin_boer   cwebb365   Dorrinda   G1124   Gabibalaban   Manan-Malhotra   jcfDaniel   WarrenBelz   Waegemma   drrickryp   GuidoPreite    If an * is at the end of a user's name this means they are a Multi Super User, in more than one community. Please note this is not the final list, as we are pending a few acceptances.  Once they are received the list will be updated. 

Register now for the Business Applications Launch Event | Tuesday, April 4, 2023

Join us for an in-depth look into the latest updates across Microsoft Dynamics 365 and Microsoft Power Platform that are helping businesses overcome their biggest challenges today.   Find out about new features, capabilities, and best practices for connecting data to deliver exceptional customer experiences, collaborating, and creating using AI-powered capabilities, driving productivity with automation—and building towards future growth with today’s leading technology.   Microsoft leaders and experts will guide you through the full 2023 release wave 1 and how these advancements will help you: Expand visibility, reduce time, and enhance creativity in your departments and teams with unified, AI-powered capabilities.Empower your employees to focus on revenue-generating tasks while automating repetitive tasks.Connect people, data, and processes across your organization with modern collaboration tools.Innovate without limits using the latest in low-code development, including new GPT-powered capabilities.    Click Here to Register Today!    

Check out the new Power Platform Communities Front Door Experience!

We are excited to share the ‘Power Platform Communities Front Door’ experience with you!   Front Door brings together content from all the Power Platform communities into a single place for our community members, customers and low-code, no-code enthusiasts to learn, share and engage with peers, advocates, community program managers and our product team members. There are a host of features and new capabilities now available on Power Platform Communities Front Door to make content more discoverable for all power product community users which includes ForumsUser GroupsEventsCommunity highlightsCommunity by numbersLinks to all communities Users can see top discussions from across all the Power Platform communities and easily navigate to the latest or trending posts for further interaction. Additionally, they can filter to individual products as well.   Users can filter and browse the user group events from all power platform products with feature parity to existing community user group experience and added filtering capabilities.     Users can now explore user groups on the Power Platform Front Door landing page with capability to view all products in Power Platform.      Explore Power Platform Communities Front Door today. Visit Power Platform Community Front door to easily navigate to the different product communities, view a roll up of user groups, events and forums.

Microsoft Power Platform Conference | Registration Open | Oct. 3-5 2023

We are so excited to see you for the Microsoft Power Platform Conference in Las Vegas October 3-5 2023! But first, let's take a look back at some fun moments and the best community in tech from MPPC 2022 in Orlando, Florida.   Featuring guest speakers such as Charles Lamanna, Heather Cook, Julie Strauss, Nirav Shah, Ryan Cunningham, Sangya Singh, Stephen Siciliano, Hugo Bernier and many more.   Register today: https://www.powerplatformconf.com/   

Users online (2,965)