cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
tomh
Resolver I
Resolver I

Delay Until 2am

Hello All:

 

I have a simple Approval flow that triggers upon recurrence every 3 days. It gets file properties and if file approval=pending it sends email to approver for approval. Our biggest challenge is that users are often in the files needing to be approved. Therefor when the the approver approves and the flow tries to update the file properties to 'Approve' it cannot do so because the file is locked for editing. The flow continues and errors but the approver is not aware of the fact that the file properties have not been updated. Then again on the third day they receive an email for approval of the same file because the properties are still=pending becuase the file was locked for editing and the metadata could not be updated on previous attempt. I have worked with this flow for months now and have tried just about everything. The only thing I have left is to try to add some kind of delay function into the flow to update the file properties at a specific time when the least amount of users are potentially in the file, say 2am. 

 

I am open to options here. I have not been able to successfully implement a delay in such a way that would only update at 2am. The closest I have been able to get is to delay updating for a given amount of hours say 10 hours. This presents a problem as well as hours of business are roughly between 6am and 6pm. So even if an approver approves at 6am sharp the metadata would then be updated at 4pm, which still falls between our business hours thus potentially leaving the file locked for editing. 

 

Any help or suggestions would be greatly appreciated.

 

Thanks all!

 

Tom

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
tom_riha
Most Valuable Professional
Most Valuable Professional

Hello @tomh ,

to delay until 2am the next day you can use the following expression inside 'Delay until' action.

addHours(utcNow('yyyy-MM-dd'),26,'yyyy-MM-ddTHH:mmZ')

utcNow('yyyy-MM-dd') will give you today's date at 00:00, to which you use the addHours() expression to add 26 hours to get tomorrow 2am and format it as 'yyyy-MM-ddTHH:mmZ' to fit the requirements of the 'Delay until' action.

image.png

 



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]

View solution in original post

22 REPLIES 22
Anonymous
Not applicable

@tomh ,

 

You could calculate how many hours are between utcNow() and 2am tomorrow and have the flow delay for that amount of time:

 

the flow in the below screenshot does the following:

 

1. Converts the current time in UTC (Universal Coordinated Time) to local timezone and returns only the Hours number (from a 24-hour format, so 1:00PM=13).

 

2. subtracts the current hour from 26 and returns that figure. 26 is the number of hours there are from 00:00 on day one to 0200 (2:00AM) the following day. this calculation determines how many hour there are from right now to 0200 tomorrow morning.

 

3. delays the flow for that many hours

DelayFlow.png

 

the expressions that you need are in the action block comments in the screenshot.

 

 

I hope this helps!

 

thanks,

Kyle

Paulie78
Super User
Super User

Is there a reason that I am not understand that you cannot just use the delay until action?

 

DelayUntil;.PNG

tom_riha
Most Valuable Professional
Most Valuable Professional

Hello @tomh ,

to delay until 2am the next day you can use the following expression inside 'Delay until' action.

addHours(utcNow('yyyy-MM-dd'),26,'yyyy-MM-ddTHH:mmZ')

utcNow('yyyy-MM-dd') will give you today's date at 00:00, to which you use the addHours() expression to add 26 hours to get tomorrow 2am and format it as 'yyyy-MM-ddTHH:mmZ' to fit the requirements of the 'Delay until' action.

image.png

 



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]
Anonymous
Not applicable

It looks like I like doing things the hard way... @Paulie78  and @tom_riha 's solutions are much more simple and elegant.

Paulie78
Super User
Super User

@Anonymous don't feel too bad about it. I came up with an elaborate solution also, which I think is quite neat! That is when I noticed delay until 😥

@tom_riha 

Thank you for this. Are you saying that utcNow always returns time of 00:00? So, adding any hours to that figure will always update at set time regardless of whether the approval occurs at 7am or 3pm?

 

tom_riha
Most Valuable Professional
Most Valuable Professional

@tomh 

Expression utcNow() without parameter returns date and time when the action was executed = now. But you if you add a format parameter where you ignore the time part utcNow('yyyy-MM-dd') it'll give you 00:00 time.



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]

Does this look correct?

Rhia.JPG

tom_riha
Most Valuable Professional
Most Valuable Professional

Yes, that looks just fine. 🙂



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]

@tom_riha 

Thank you again for this. I will test now and report back the success. 

 

Tom

tomh
Resolver I
Resolver I

@tom_riha 

Hello.

 

The flow did not work as expected.

The flow was manually triggered at 1:09pm on 11/6 as a test on four files added to SharePoint. The flow proceeded to update the file properties at 9:00pm on the same day. The intended result was to update file properties at precisely 2:00am. The delay until input value shown on the successful run shows 'Delay Until 2020-11-07T02:00:002.

 

Any thoughts on why the flow updated the file properties at 9:00pm instead of at 2:00am?

 

Thanks!


Tom

 

Anonymous
Not applicable

@tomh ,

 

my first thought would be to check the TimeZone.

 

In your screenshot above, you're adding the number of hours required to get from utcNow() (when the flow was triggered) to 2:00AM UTC.

 

If you're in Eastern Time, that means the flow is going to wait until 9:00PM EST.

 

You can either manually adjust your expression to account for the timezone difference (note that this will not account for DST next spring), or you can use the Convert TimeZone action block and pass in your addHours() expression.

 

thanks,

Kyle

@Anonymous 

Thank you for this. Yes we are on EST and want the flow to execute the 'Update File Properties' at precisely 2:00am the following day. Can you provide the formula for this by chance?

Thanks!


Tom

tom_riha
Most Valuable Professional
Most Valuable Professional

Hello @tomh ,

that could be a difference in a timezone. What account is running the flow? What timezone it has configured? I'm not sure but it could be user specific.

Edit: I just did a few tests and it expects time in UTC timezone, so you'll need to adjust the time as @Anonymous already suggested.



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]
Anonymous
Not applicable

@tomh ,

 

I would suggest attempting one of the solutions that I suggested, and then request assistance if you're unable to get either (or both) to work.

 

You've been given the expression that will get you want you want, you just need to adjust it to meet your specific needs.

 

thanks,

Kyle

Hello @Anonymous 

 

Maybe I'm misunderstanding what has been provided as the initial expression. I have control over when the flow is triggered but do not have control over when the approval is completed. The 'Update File Properties' action is the step that I believe I need to address here and that is dependent on when the actual approval is executed. I have no control over when the approval action is executed and so simply adding hours in the form of a delay will not achieve what I need if I apply it to when the approval is executed. I need a set value I believe irrelevant of when the approval is executed to update file properties at 2:00am EST only.

Does that make sense?

 

Or is it as simple as adding 6 hours to the 26 hour value to get to 2:00am? 

Anonymous
Not applicable

@tomh ,

 

Yes, that does make sense; and I understand where you're coming from and that it seems counter-intuitive to be adding a set number of hours when you don't know WHEN the approval will be executed (i.e. you don't know the value of "utcNow()" [ remember that utcNow() returns the current time in UTC timezone] ).

 

what @tom_riha's solution does is help you calculate how many hours are between:

 

1. The time that the flow runs AKA the "current" time AKA the value of the expression utcNow()

 

and 

 

2. the next occurence of 2:00AM (let's agree to call it 2:00AM tomorrow morning since we'll assume that the flow is executing "today")

 

To calculate that time gap we need to know both of those points in time.

 

The first one is easy: the expression utcNow() returns that exact value. If the flow executes today at 12 noon UTC, the value of utcNow() will be 2020-11-09T12:00:00Z (utcNow() is a datetime value, hence why it has the date in it also). Keep in mind that UTC is five hours ahead of EST so when the value of utcNow() is 12pm (noon), it's actually 7:00AM EST.

 

The second point in time is a little more tricky to figure out, but it involves finding a concrete reference point from which we can calculate when (in how many hours) 2:00AM tomorrow morning will occur. @tom_riha's expression above does just that by using a starting point of 00:00 this morning, the beginning of the day, by taking utcNow() and removing the time component; this effectively reduces the time component to 00:00 as he explained above. So, now, it doesn't matter when utcNow() is; the above expression will always return 00:00 (i.e. midnight) this morning.

 

Since 2:00AM tomorrow morning will always be 26 hours after 00:00 this morning, we can add 26 hours to 00:00 this morning to get the datetime of 2:00AM tomorrow morning.

 

HOWEVER!

 

Remember that all of the numbers we just crunched are based on utcNow() which returns the datetime in the UTC time zone. With no adjustments, the above calculations will return datetimes five hours EARLIER for each of the calculated values. So, if the flow was run at noon today UTC, you'd get the following values in for the respective time zones:

UTC (desired):

utcNow() = 2020-11-09T12:00:00Z

utcNow('yyyy-MM-dd') = 2020-11-09T00:00:00Z

addHours(utcNow('yyyy-MM-dd'),26,'yyyy-MM-ddTHH:mmZ') = 2020-11-10T02:00:00Z

 

EST (actual):

utcNow() = 2020-11-09T07:00:00Z

utcNow('yyyy-MM-dd') = 2020-11-08T19:00:00Z

addHours(utcNow('yyyy-MM-dd'),26,'yyyy-MM-ddTHH:mmZ') = 2020-11-09T21:00:00Z

 

 

If that makes sense, then it's clear now that an adjustment has to be made to the value that is being passed into the Delay Until action block.

 

Either you can add five hours to the "26" in the expression above, OR, you can pass that expression into a Convert Time Zone action block and pass the output of that into the Delay Until.

 

Does that makes sense?

 

thanks,
Kyle

@Anonymous , @tom_riha 

 

I'm still not sure we are on the right path...the GetUTCNow with the formatting applies to when the flow was triggered correct? I think I need to apply the Get UTCNow to when the approval occurs and set specific value vs setting in relation to when the flow was triggered. No? Because it could be 2 hour or two days before the approval step is completed and if the Get UTCNow applies to when the flow is triggered rather than when the approval occurs then the file update could happen prematurely, correct? If the GetUTCNow is nested below the Condition, would it pull the UTC of when the approval occurs or the UTC of when the flow initially triggers?

THx all!

 

Helpful resources

Announcements

Summer of Solutions | Week 3 Results | Win free tickets to the Power Platform Conference

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22  

Copilot Cookbook Challenge | WINNERS ANNOUNCED | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge random winners have been selected for the Challenge.  Thank you to everyone who participated in this challenge.    Copilot Cookbook Gallery:Power Apps Cookbook Gallery: 1. @swaminawale  1. @renatoromao     2.  @SpongYe  2.   @nickpotts10  *Please note if for any reason a winner declines, we will have another random drawing.   Check out all of the Cookbook Submissions: 1. Copilot Studio Cookbook Gallery: https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30WINNERS ANNOUNCED - JULY 8th     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge. Early Bird Submissions: @renato Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  n/a2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a   Week 2 Results:  Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Kasun_Pathirana1. ManishSolanki2. cloudatica2. madlad3. n/a3. SpongYe4. n/a4. n/a5. n/a5. n/a     Week 3 Results:  Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Parul_Yadav_Neo1. n/a2. SpongYe2. n/a3. n/a3. n/a4. n/a4. n/a5. n/a5. n/a   Week 4 Results:  Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. @nickpotts10  1. @ShrushtiShah  2. @Suniti_0020 2. @swaminawale 3. n/a3. @farukhis786 4. n/a4. @ManishSolanki  5. n/a5.  n/a

Important Update for Community Platform Access | READ ONLY July 16-22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Tuesday Tip | How to Become a Community Blog Author

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   This Week's Topic: How to Become a Community Blog Author We want YOU to be part of the community blog! Sharing your knowledge of Power Platform is an essential part of our community! Here's why:   It helps create a vibrant and dynamic community of makers who can learn from each other’s experiences and insights.It provides a platform for collaboration and innovation, where members can share their ideas and work together to develop new solutions.It helps promote Power Platform by showcasing its capabilities and real-world applications.It helps build trust and credibility in the community because you are providing valuable information and resources your fellow community members can use to improve their skills and knowledge. By sharing your knowledge of Power Platform in the community blog, you help us create a more engaged and informed community, better equipped to tackle complex challenges. To get started with blogging across the Power Platform communities, please visit the following links:   Power Apps: https://powerusers.microsoft.com/t5/Power-Apps-Community-Blog/bg-p/PowerAppsBlog Power Automate: https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog Copilot Studios: https://powerusers.microsoft.com/t5/Power-Virtual-Agents-Community/bg-p/PVACommunityBlogPower Pages: https://powerusers.microsoft.com/t5/Power-Pages-Community-Blog/bg-p/mpp_blog   When you follow the link, look for a button like the one below on the right rail of your community blog, and let us know you're interested. We can't wait to connect with you and help you get started. Thanks for being part of our incredible community--and thanks for becoming part of the community blog!  

June 2024 Community Newsletter

It's time for the June Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzcreativeopinionExpiscornovus Fubar AmikNived_NambiarPstork1OliverRodriguesmmbr1606ManishSolankifernandosilvaragavanrajanBCBuizerExpiscornovusrenatoromaoLucas001timlAlexEncodianViswavEmadBeshaiDBO_DVDeenujiUmiantaChrist0fGochixVishnuReddy1997citron-trucmandelaVishalJhaverieetuRoboJohanTprathyooanandm08VictorIvanidzenicoxrfm1964shashankbhidepaulbeck1 rpaa   LATEST NEWS Summer of Solutions 2024 The Summer of Solutions challenge kicked off this month - an amazing Microsoft Community initiative to win free tickets to the Power Platform Community Conferencethis September in Las Vegas. The challenge is NOW OPEN to all #PowerPlatform community members and will consist of four weekly entry periods until July 14th, 2024. Click the image below to find out more on how you can win free tickets to #PPCC24 by entering the Summer of Solutions TODAY!   Microsoft Customer Stories We're constantly working with an array of great businesses across the globe to assist them in taking advantage of the latest business applications technology. If you'd like to find out more about their low code journeys, click the image below to view our playlist of Customer Stories to discover how Accenture, Lumen Technologies, Cineplex, and many more, are streamlining their business processes with Microsoft Power Platform.     Microsoft Leap Program Have you heard of Microsoft Leap - a global program designed to recruit, develop, and upskill unconventional talent for careers in the tech space. Microsoft Leap organizes a number of pathways into the industry, including the recent "NFL Legend Cohort - Technical Program Management" run jointly with the NFL Player Care Foundation (PCF) who are dedicated to helping retired players improve their quality of life. Click the image below to find out more about the great day shared at the Redmond campus and be sure to visit the Microsoft Leap website to discover how this amazing initiative is helping re-launch the lives of countless individuals. www.leap.microsoft.com       UPCOMING EVENTS Biz Apps Partner Summit | Seattle | July 24-25 It's not long now until the Biz Apps Partner Summit, which takes place at the Hilton Bellevue in Seattle on July 24-25, 2024. This event is the perfect place to network, connect, and learn how to scale your Microsoft practice, drive profitable revenue, and dazzle your customers! There's a great selection of speakers, including the likes of Tom Patterson, Donald Kossmann Joseph Corigliano, Cecilia Flombaum, Peter Jensen, John Siefert, Becky Lymberis, Daniel Rippey, and many more. Click the image below to find out more and register today!     TechCon365 & Power Platform Conference | D.C. | August 12-16 Things are hotting up for the next TechCon365 & PWRCON Conference in Washington D.C. on August 12-16, 2024. Featuring the likes of Tamara Bredemus, Sunny Eltepu, Lindsay Shelton, Brian Alderman, Daniel Glenn, Julie Turner, Jim Novak, John White, Jason Himmelstein, Luc Labelle, Emily Mancini, MVP, UXMC, Fabian Williams, Emma Wiehe,and many more, this is the perfect event for those that are looking to gain invaluable insights from industry experts. Click the image below to grab your tickets today!     Power Platform Community Conference | Vegas | Sept. 18-20th Are you ready to come and join the fun in Las Vegas this September at PPCC24? This event is the perfect place to connect with fellow business applications enthusiasts and share your knowledge with the worldwide Microsoft Community. Now's your chance to hold all the aces. Just click the image below to find out more and we hope to see you go ALL-IN this September in Las Vegas!     For more events, click the image below to visit the Community Days website.  

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (3,118)