cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
tomh
Resolver I
Resolver I

Delay Until 2am

Hello All:

 

I have a simple Approval flow that triggers upon recurrence every 3 days. It gets file properties and if file approval=pending it sends email to approver for approval. Our biggest challenge is that users are often in the files needing to be approved. Therefor when the the approver approves and the flow tries to update the file properties to 'Approve' it cannot do so because the file is locked for editing. The flow continues and errors but the approver is not aware of the fact that the file properties have not been updated. Then again on the third day they receive an email for approval of the same file because the properties are still=pending becuase the file was locked for editing and the metadata could not be updated on previous attempt. I have worked with this flow for months now and have tried just about everything. The only thing I have left is to try to add some kind of delay function into the flow to update the file properties at a specific time when the least amount of users are potentially in the file, say 2am. 

 

I am open to options here. I have not been able to successfully implement a delay in such a way that would only update at 2am. The closest I have been able to get is to delay updating for a given amount of hours say 10 hours. This presents a problem as well as hours of business are roughly between 6am and 6pm. So even if an approver approves at 6am sharp the metadata would then be updated at 4pm, which still falls between our business hours thus potentially leaving the file locked for editing. 

 

Any help or suggestions would be greatly appreciated.

 

Thanks all!

 

Tom

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
tom_riha
Super User
Super User

Hello @tomh ,

to delay until 2am the next day you can use the following expression inside 'Delay until' action.

addHours(utcNow('yyyy-MM-dd'),26,'yyyy-MM-ddTHH:mmZ')

utcNow('yyyy-MM-dd') will give you today's date at 00:00, to which you use the addHours() expression to add 26 hours to get tomorrow 2am and format it as 'yyyy-MM-ddTHH:mmZ' to fit the requirements of the 'Delay until' action.

image.png

 



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]

View solution in original post

21 REPLIES 21
Anonymous
Not applicable

@tomh ,

 

You could calculate how many hours are between utcNow() and 2am tomorrow and have the flow delay for that amount of time:

 

the flow in the below screenshot does the following:

 

1. Converts the current time in UTC (Universal Coordinated Time) to local timezone and returns only the Hours number (from a 24-hour format, so 1:00PM=13).

 

2. subtracts the current hour from 26 and returns that figure. 26 is the number of hours there are from 00:00 on day one to 0200 (2:00AM) the following day. this calculation determines how many hour there are from right now to 0200 tomorrow morning.

 

3. delays the flow for that many hours

DelayFlow.png

 

the expressions that you need are in the action block comments in the screenshot.

 

 

I hope this helps!

 

thanks,

Kyle

Paulie78
Super User
Super User

Is there a reason that I am not understand that you cannot just use the delay until action?

 

DelayUntil;.PNG

tom_riha
Super User
Super User

Hello @tomh ,

to delay until 2am the next day you can use the following expression inside 'Delay until' action.

addHours(utcNow('yyyy-MM-dd'),26,'yyyy-MM-ddTHH:mmZ')

utcNow('yyyy-MM-dd') will give you today's date at 00:00, to which you use the addHours() expression to add 26 hours to get tomorrow 2am and format it as 'yyyy-MM-ddTHH:mmZ' to fit the requirements of the 'Delay until' action.

image.png

 



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]
Anonymous
Not applicable

It looks like I like doing things the hard way... @Paulie78  and @tom_riha 's solutions are much more simple and elegant.

Paulie78
Super User
Super User

@Anonymous don't feel too bad about it. I came up with an elaborate solution also, which I think is quite neat! That is when I noticed delay until 😥

@tom_riha 

Thank you for this. Are you saying that utcNow always returns time of 00:00? So, adding any hours to that figure will always update at set time regardless of whether the approval occurs at 7am or 3pm?

 

@tomh 

Expression utcNow() without parameter returns date and time when the action was executed = now. But you if you add a format parameter where you ignore the time part utcNow('yyyy-MM-dd') it'll give you 00:00 time.



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]

Does this look correct?

Rhia.JPG

Yes, that looks just fine. 🙂



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]

@tom_riha 

Thank you again for this. I will test now and report back the success. 

 

Tom

tomh
Resolver I
Resolver I

@tom_riha 

Hello.

 

The flow did not work as expected.

The flow was manually triggered at 1:09pm on 11/6 as a test on four files added to SharePoint. The flow proceeded to update the file properties at 9:00pm on the same day. The intended result was to update file properties at precisely 2:00am. The delay until input value shown on the successful run shows 'Delay Until 2020-11-07T02:00:002.

 

Any thoughts on why the flow updated the file properties at 9:00pm instead of at 2:00am?

 

Thanks!


Tom

 

Anonymous
Not applicable

@tomh ,

 

my first thought would be to check the TimeZone.

 

In your screenshot above, you're adding the number of hours required to get from utcNow() (when the flow was triggered) to 2:00AM UTC.

 

If you're in Eastern Time, that means the flow is going to wait until 9:00PM EST.

 

You can either manually adjust your expression to account for the timezone difference (note that this will not account for DST next spring), or you can use the Convert TimeZone action block and pass in your addHours() expression.

 

thanks,

Kyle

@Anonymous 

Thank you for this. Yes we are on EST and want the flow to execute the 'Update File Properties' at precisely 2:00am the following day. Can you provide the formula for this by chance?

Thanks!


Tom

Hello @tomh ,

that could be a difference in a timezone. What account is running the flow? What timezone it has configured? I'm not sure but it could be user specific.

Edit: I just did a few tests and it expects time in UTC timezone, so you'll need to adjust the time as @Anonymous already suggested.



[ If I have answered your question, please Accept the post as a solution. ]
[ If you like my response, please give it a Thumbs Up. ]

[ I also blog about Power Automate solutions even for non-IT people. ]
Anonymous
Not applicable

@tomh ,

 

I would suggest attempting one of the solutions that I suggested, and then request assistance if you're unable to get either (or both) to work.

 

You've been given the expression that will get you want you want, you just need to adjust it to meet your specific needs.

 

thanks,

Kyle

Hello @Anonymous 

 

Maybe I'm misunderstanding what has been provided as the initial expression. I have control over when the flow is triggered but do not have control over when the approval is completed. The 'Update File Properties' action is the step that I believe I need to address here and that is dependent on when the actual approval is executed. I have no control over when the approval action is executed and so simply adding hours in the form of a delay will not achieve what I need if I apply it to when the approval is executed. I need a set value I believe irrelevant of when the approval is executed to update file properties at 2:00am EST only.

Does that make sense?

 

Or is it as simple as adding 6 hours to the 26 hour value to get to 2:00am? 

Anonymous
Not applicable

@tomh ,

 

Yes, that does make sense; and I understand where you're coming from and that it seems counter-intuitive to be adding a set number of hours when you don't know WHEN the approval will be executed (i.e. you don't know the value of "utcNow()" [ remember that utcNow() returns the current time in UTC timezone] ).

 

what @tom_riha's solution does is help you calculate how many hours are between:

 

1. The time that the flow runs AKA the "current" time AKA the value of the expression utcNow()

 

and 

 

2. the next occurence of 2:00AM (let's agree to call it 2:00AM tomorrow morning since we'll assume that the flow is executing "today")

 

To calculate that time gap we need to know both of those points in time.

 

The first one is easy: the expression utcNow() returns that exact value. If the flow executes today at 12 noon UTC, the value of utcNow() will be 2020-11-09T12:00:00Z (utcNow() is a datetime value, hence why it has the date in it also). Keep in mind that UTC is five hours ahead of EST so when the value of utcNow() is 12pm (noon), it's actually 7:00AM EST.

 

The second point in time is a little more tricky to figure out, but it involves finding a concrete reference point from which we can calculate when (in how many hours) 2:00AM tomorrow morning will occur. @tom_riha's expression above does just that by using a starting point of 00:00 this morning, the beginning of the day, by taking utcNow() and removing the time component; this effectively reduces the time component to 00:00 as he explained above. So, now, it doesn't matter when utcNow() is; the above expression will always return 00:00 (i.e. midnight) this morning.

 

Since 2:00AM tomorrow morning will always be 26 hours after 00:00 this morning, we can add 26 hours to 00:00 this morning to get the datetime of 2:00AM tomorrow morning.

 

HOWEVER!

 

Remember that all of the numbers we just crunched are based on utcNow() which returns the datetime in the UTC time zone. With no adjustments, the above calculations will return datetimes five hours EARLIER for each of the calculated values. So, if the flow was run at noon today UTC, you'd get the following values in for the respective time zones:

UTC (desired):

utcNow() = 2020-11-09T12:00:00Z

utcNow('yyyy-MM-dd') = 2020-11-09T00:00:00Z

addHours(utcNow('yyyy-MM-dd'),26,'yyyy-MM-ddTHH:mmZ') = 2020-11-10T02:00:00Z

 

EST (actual):

utcNow() = 2020-11-09T07:00:00Z

utcNow('yyyy-MM-dd') = 2020-11-08T19:00:00Z

addHours(utcNow('yyyy-MM-dd'),26,'yyyy-MM-ddTHH:mmZ') = 2020-11-09T21:00:00Z

 

 

If that makes sense, then it's clear now that an adjustment has to be made to the value that is being passed into the Delay Until action block.

 

Either you can add five hours to the "26" in the expression above, OR, you can pass that expression into a Convert Time Zone action block and pass the output of that into the Delay Until.

 

Does that makes sense?

 

thanks,
Kyle

@Anonymous , @tom_riha 

 

I'm still not sure we are on the right path...the GetUTCNow with the formatting applies to when the flow was triggered correct? I think I need to apply the Get UTCNow to when the approval occurs and set specific value vs setting in relation to when the flow was triggered. No? Because it could be 2 hour or two days before the approval step is completed and if the Get UTCNow applies to when the flow is triggered rather than when the approval occurs then the file update could happen prematurely, correct? If the GetUTCNow is nested below the Condition, would it pull the UTC of when the approval occurs or the UTC of when the flow initially triggers?

THx all!

 

Helpful resources

Announcements

November 2023 Community Newsletter

Welcome to our November Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members. If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across the Power Platform and beyond.        This month's highlights:- - Our most active community members- Microsoft Power Up Program- Microsoft Community Days website - The latest blogs and more                 COMMUNITY HIGHLIGHTS Check out the most active community members of the last month. These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, just get active! FLMikePstork1Nived_NambiarWarrenBelzSprongYeManishSolankiLaurensMwskinnermlcAgniusExpiscornovuscreativeopinion KatieAUinzil2kHaressh2728hafizsultan242douicmccaughanwoLucas001domliu   Power Up Program Click the image below to discover more about the amazing Microsoft Power Up Program, as Reem Omar, Abbas Godhrawala, Chahine Atallah, Ruby Ruiz Brown, Juan Francisco Sánchez Enciso, Joscelyne Andrade Arévalo, Eric G. and Paulina Pałczyńska share how non-tech professionals can successfully advance into a new career path using Microsoft #PowerPlatform.   To find out more about this amazing initiative, click here to apply for the program and reboot your journey into low-code app development today!     Community Days - Event Website Have you checked out the Community Days website yet? Dedicated to the volunteer community organizers around the world, Community Days is the perfect place to find an event near you or add an event for wider exposure. Many thanks to Thomas Daly, Sharon Weaver, Sedat Tum, Jonathan Weaver, Manpreet Singh, David Leveille, Jason Rivera, Mike Maadarani, Rob Windsor and the team for all their hard work. Anyone can host a Community Day on any topic relevant to our industry, just click the image below to find out more.       EVENT NEWS Power Platform French Summit - Paris/Virtual - 6-7th Dec It's not long now until the Power Platform French Summit, which takes place both virtually and in-person at the Microsoft France conference center in Paris on 6-7th December 2023. If you can't make it in-person, all sessions will also be broadcast on virtual networks for better distribution and accessibility.   There's a fantastic array of speakers, including Jérémy LAPLAINE, Amira Beldjilali, Rémi Chambard, Erika Beaumier, Makenson Frena, Assia Boutera, Elliott Pierret, Clothilde Facon, Gilles Pommier, Marie Aubert, Antoine Herbosa, Chloé Moreau, Raphaël Senis, Rym Ben Hamida, Loïc Cimon, Joséphine Salafia, David Zoonekyndt, Aïcha Charpentier, Henry Jammes, Milene Rochard, Mehdi EL YASSIR, and many more. Click the image below for more information.       LATEST COMMUNITY BLOG ARTICLES Power Apps Community Blog Power Automate Community Blog Copilot Community Blog Power Pages Community Blog

Back to Basics Tuesday Tip #10: Community Support

This is the TENTH post in our ongoing series dedicated to helping the amazing members of our community--both new members and seasoned veterans--learn and grow in how to best engage in the community! Each Tuesday, we feature new content that will help you best understand the community--from ranking and badges to profile avatars, from Super Users to blogging in the community. Our hope is that this information will help each of our community members grow in their experience with Power Platform, with the community, and with each other!   This Week: All About Community Support   Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.     Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most.     Community Accounts & Registration is the go-to source for any and all information related to your account here in the community. It's full of great knowledge base articles that will help you manage your community account and know what steps to take if you wish to close your account.  ●  Power Apps  ●  Power Automate  ●  Power Pages, ●  Copilot Studio      Using the Community is your source for assistance with everything from Community User Groups to FAQ's and more. If you want to know what kudos are, how badges work, how to level up your User Group or something else, you will probably find the answers here. ●  Power Apps   ● Power Automate    ●  Power Pages  ●  Copilot Studio      Community Feedback is where you can share opportunities, concerns, or get information from the Community Engagement team. It's your best place to post a question about an issue you're having in the community, a general question you need answered. Whatever it is, visit Community Feedback to get the answers you need right away. Our team is honored to partner with you and can't wait to help you!   ●  Power Apps  ● Power Automate   ● Power Pages   ● Copilot Studio  

Microsoft Ignite 2023: The Recap

What an amazing event we had this year, as Microsoft showcased the latest advancements in how AI has the potential to reshape how customers, partners and developers strategize the future of work. Check out below some of our handpicked videos and Ignite announcements to see how Microsoft is driving real change for users and businesses across the globe.   Video Highlights Click the image below to check out a selection of Ignite 2023 videos, including the "Microsoft Cloud in the era of AI" keynote from Scott Guthrie, Charles Lamanna, Arun Ulag, Sarah Bird, Rani Borkar, Eric Boyd, Erin Chapple, Ali Ghodsi, and Seth Juarez. There's also a great breakdown of the amazing Microsoft Copilot Studio with Omar Aftab, Gary Pretty, and Kendra Springer, plus exciting sessions from Rajesh Jha, Jared Spataro, Ryan Jones, Zohar Raz, and many more.     Blog Announcements Microsoft Copilot presents an opportunity to reimagine the way we work—turning natural language into the most powerful productivity tool on the planet. With AI, organizations can unearth value in data across productivity tools like business applications and Microsoft 365. Click the link below to find out more.     Check out the latest features in Microsoft Power Apps that will help developers create AI-infused apps faster, give administrators more control over managing thousands of Microsoft Power Platform makers at scale, and deliver better experiences to users around the world. Click the image below to find out more.     Click below to discover new ways to orchestrate business processes across your organization with Copilot in Power Automate. With its user-friendly interface that offers hundreds of prebuilt drag-and-drop actions, more customers have been able to benefit from the power of automation.     Discover how Microsoft Power Platform and Microsoft Dataverse are activating the strength of your enterprise data using AI, the announcement of “plugins for Microsoft Copilot for Microsoft 365”, plus two new Power Apps creator experiences using Excel and natural language.       Click below to find out more about the general availability of Microsoft Fabric and the public preview of Copilot in Microsoft Fabric. With the launch of these next-generation analytics tools, you can empower your data teams to easily scale the demand on your growing business.     And for the rest of all the good stuff, click the link below to visit the Microsoft Ignite 2023 "Book of News", with over ONE HUNDRED announcements across infrastructure, data, security, new tools, AI, and everything else in-between!        

Back to Basics Tuesday Tip #9: All About the Galleries

This is the ninth post in our series dedicated to helping the amazing members of our community--both new members and seasoned veterans--learn and grow in how to best engage in the community! Each Tuesday, we feature new content that will help you best understand the community--from ranking and badges to profile avatars, from Super Users to blogging in the community. Our hope is that this information will help each of our community members grow in their experience with Power Platform, with the community, and with each other!     Today's Tip: All About the Galleries Have you checked out the library of content in our galleries? Whether you're looking for the latest info on an upcoming event, a helpful webinar, or tips and tricks from some of our most experienced community members, our galleries are full of the latest and greatest video content for the Power Platform communities.   There are several different galleries in each community, but we recommend checking these out first:   Community Connections & How-To Videos Hosted by members of the Power Platform Community Engagement  Team and featuring community members from around the world, these helpful videos are a great way to "kick the tires" of Power Platform and find out more about your fellow community members! Check them out in Power Apps, Power Automate, Power Pages, and Copilot Studio!         Webinars & Video Gallery Each community has its own unique webinars and videos highlighting some of the great work being done across the Power Platform. Watch tutorials and demos by Microsoft staff, partners, and community gurus! Check them out: Power Apps Webinars & Video Gallery Power Automate Webinars & Video Gallery Power Pages Webinars & Video Gallery Copilot Studio Webinars & Video Gallery   Events Whether it's the excitement of the Microsoft Power Platform Conference, a local event near you, or one of the many other in-person and virtual connection opportunities around the world, this is the place to find out more about all the Power Platform-centered events. Power Apps Events Power Automate Events Power Pages Events Copilot Studio Events   Unique Galleries to Each Community Because each area of Power Platform has its own unique features and benefits, there are areas of the galleries dedicated specifically to videos about that product. Whether it's Power Apps samples from the community or the Power Automate Cookbook highlighting unique flows, the Bot Sharing Gallery in Copilot Studio or Front-End Code Samples in Power Pages, there's a gallery for you!   Check out each community's gallery today! Power Apps Gallery Power Automate Gallery Power Pages Gallery Copilot Studio Gallery

Unlocking the Power of Community: A Journey with Featued User Group leaders Geetha Sivasailam and Ben McMann

In the bustling world of technology, two dynamic leaders, Geetha Sivasailam and Ben McMann, have been at the forefront, steering the ship of the Dallas Fort Worth Power Platform User Group since its inception in February 2019. As Practice Lead (Power Platform | Fusion Dev) at Lantern, Geetha brings a wealth of consulting experience, while Ben, a key member of the Studio Leadership team at Lantern, specializes in crafting strategies that leverage Microsoft digital technologies to transform business models.   Empowering Through Community Leadership Geetha and Ben's journey as user group leaders began with a simple yet powerful goal: to create a space where individuals across the DFW area could connect, grow their skills, and add value to their businesses through the Power Platform. The platform, known for its versatility, allows users to achieve more with less code and foster creativity.   The Power of Community Impact Reflecting on their experiences, Geetha and Ben emphasize the profound impact that community engagement has had on both their professional and personal lives. The Power Platform community, they note, is a wellspring of resources and opportunities, fostering continuous learning, skill enhancement, and networking with industry experts and peers.   Favorite Moments and Words of Wisdom The duo's favorite aspect of leading the user group lies in witnessing the transformative projects and innovations community members create with the Power Platform. Their advice to aspiring user group leaders? "Encourage diverse perspectives, maintain an open space for idea-sharing, stay curious, and, most importantly, have fun building a vibrant community."   Building Bridges, Breaking Barriers Geetha and Ben encourage others to step into the realm of user group leadership, citing the rewarding experience of creating and nurturing a community of like-minded individuals. They highlight the chance to influence, impact, and positively guide others, fostering connections that extend beyond mere technology discussions.   Joining a User Group: A Gateway to Growth The leaders stress the importance of joining a user group, emphasizing exposure to diverse perspectives, solutions, and career growth opportunities within the Power Platform community. "Being part of such a group provides a supportive environment for seeking advice, sharing experiences, and navigating challenges."   A Year of Milestones Looking back at the past year, Geetha and Ben express pride in the group's growth and global participation. They recount the enriching experience of meeting members in person at the Microsoft Power Platform conference, showcasing the diverse range of perspectives and guest speakers that enriched the community's overall experience.   Continuous Learning on the Leadership Journey As user group leaders, Geetha and Ben recognize the continuous learning curve, blending interpersonal skills, adaptability, and dedication to foster a vibrant community. They highlight the importance of patience, persistence, and flexibility in achieving group goals, noting the significance of listening to the needs and suggestions of group members.They invite all tech enthusiasts to join the Dallas Fort Worth Power Platform User Group, a thriving hub where the power of community propels individuals to new heights in the dynamic realm of technology.

Visit the Community Lounge at Microsoft Ignite!

Are you attending Microsoft Ignite in Seattle this week? If so, we'd love to see you at the Community Lounge! Hosted by members of our Community team, it's a great place to connect, meet some Microsoft executives, and get a sticker or two. And if you're an MVP there are some special opportunities to meet up!     The Community Lounge is more than just a space—it's a hub of activity, collaboration, and camaraderie. So, dive in, explore, and make the most of your Microsoft Ignite experience by immersing yourself in the vibrant and dynamic community that awaits you.Find out the schedule and all the details here: Community Lounge at Ignite! See you at #MSIgnite!    

Users online (2,046)