cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
invintern
Helper II
Helper II

Duplicate Shared Office Calendar into D365 Calendar

Hello,

 

I am looking to update the D365 Dataverse Calendar with any and all events on our Shared Office Resources Calendar.

 

I can get D365 to re-create any events that have been 'added, updated, or deleted' but for some reason my Flow was created tons of duplicates.

 

Here is the Flow:

invintern_1-1639615135005.png

 

 

invintern_0-1639615125420.png

 

 Here are the results: 

invintern_2-1639615238643.png

 

(D365 will load forever - I assume there are 100+ duplicate entries on this day alone. Trust me that there are ALSO duplicates on the prior days, though D365 does not seem to want to load them while it is pre-loading my infinite list)

 

SO, I am hoping to re-create this Flow without the duplication.

 

Any thoughts?

 

Thanks,

 

1 ACCEPTED SOLUTION

Accepted Solutions

I've created the demo flow earlier and it appears to still work. I've updated the "updated actions", if no existing appointment record was found to update (because the appointment existed before the flow was created) then create a new appointment.

 

Here is the overall flow:

 

ekarim2020_0-1641930098926.png

 

 

Snag_218a7c.png

 

For updating the Appointments table

This is the Updated case:

ekarim2020_1-1641930170263.png

The Condition expanded for the Update case:

Snag_17e6a7.png

If there is no existing appointment record was found to update (because the appointment existed before the flow was created) then create a new appointment.

 

Close-up of the Condition action

Snag_19a212.png

Hope this helps.

 

Ellis

View solution in original post

31 REPLIES 31
ekarim2020
Super User
Super User

One approach to this problem would be to store the Calendar event Id in the Appointments table. This then will enable you to find which Dataverse record (row) needs to be updated or deleted or created. For example:

2021-12-20_17-57-15.png

 

Your flow will likely contain the following actions or similar:

 

Dataverse Diagram.drawio.png

 

Hope this helps.

 


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

invintern
Helper II
Helper II

Hi Ellis,

 

Yes, this makes sense...in theory!

 

My first question: what does the remainder of your Flow look like? I am not sure where within the Flow to put your 'add a new row 2' box.

 

What is the 'EventID' and where do I find it?

 

Do you input 'id' onto....duration? As you can see, my 'add a new row' step does NOT have an input ask for EventID. It looks to me like you put it over Duration?

invintern_0-1640032170654.png

 

How do I setup the 3-branch logic, differentiating between a record deleted, updated, or added? I am looking at the 'Condition' option, and am wondering how to end up with the results, given the inputs of 'if event [is equal to/does contain/ends with/etc].' 

 

Thank you for your efforts in helping me. Please let me know what you come up with.

 

I have a flow that does almost the opposite, it takes events from a Dataverse table and updates a SharePoint List:

2021-12-20_21-08-40.png

The concepts should be the same or similar to what you are trying to do:

2021-12-20_20-56-15.png

The SharePoint list has a column called itemInternalId that stores the Dataverse row Id (itemInternalId):

2021-12-20_21-03-35.png

The example screen shot I created of the Dataverse action was for just for demonstration purposes only. You would need to create a new column to store the Event ID:

2021-12-20_17-57-15.png

The Calendar Event Id can be found in Dynamic content as shown below:

2021-12-20_20-54-00.png

 


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

The Switch action could be used for the different actions, for example:

2021-12-20_21-34-09.png

 

2021-12-20_21-36-50.png

 

Ellis

invintern
Helper II
Helper II

Very helpful, thank you for introducing to me the concepts of Scope & Switch. 

 

I find that I am often unaware of the tools at my disposal. It is very easy to begin the PA journey somewhere in the middle (in my experience).

 

Ok, so depending on the Action Type of the events (created, deleted, updated) I can send the Flow down one of three paths.

 

Add a row makes sense. Add a row to Appointment with the details given in Exchange.

 

How about Update or Delete? Where do I find the Row ID to update? My Dynamic Content selector lets me choose the ID of the Exchange event, though I believe I need the specific Dataverse event....In my head, I could find a way to search the Dataverse for the ID that the newly-created appointment was given...though it seems like listing Rows -> Appointments does not seem to give me that level of specificity.

 

I will keep poking around. Thank you for your continued assistance. 

 

Edit: Further, would you mind please showing me the contents of your Scopes?

This is the updated logic of the flow:

 

Outlook Calendar Updating Dataverse Appointments table-Basic Event Flow.png

This is the flow based more or less on the above flow chart:

2021-12-21_10-17-32.png

 

The Outlook Calendar Id can in fact be stored in the Outlook Appointment field during the Add a new row action. The Dataverse internal name for this column is globalobjectid:

2021-12-21_10-53-10.png

 

To find appointments that were Updated or Deleted:

2021-12-21_10-21-21.png

 

Hope this helps.

 

Ellis

invintern
Helper II
Helper II

This does help. Of course, I still have a few questions. I am going to build as I type to you.

 

Regarding the snip marked "This is the flow based more or less on the above flow chart:" - What is your 'Compose Documentation' about?

 

Regarding your Conditions, I can't see what you're doing in there and here is my educated guess on the 'update event' Switch path. I have a feeling I may be incorrect here. My 'delete' path has the same condition.

invintern_2-1640110914899.png

 

Further, in my 'delete' path could you please let me know if this is what you have in mind?

invintern_3-1640111004472.png

 

 

 

Finally, in one more clue that I have something wrong, I notice that my Flow gave me the 'Apply to each' boxes, whereas yours does not have them. 

 

I believe my next issue lies in those conditions.

 

Thank you for your continued support.

-Ryan

 

 

invintern
Helper II
Helper II

One final question (maybe):

 

invintern_4-1640111219693.png

 

Where does this snip come from? I don't see any boxes asking for 'Outlook ID'. 

 

[updated] Click Show Advanced Options:

2021-12-21_18-49-15.png

Then scroll down the long page of field names:

2021-12-21_18-48-09.png

2021-12-21_18-53-51.png

The Id is taken from Dynamic content as shown below:

 

2021-12-21_18-56-27.png

Ellis

2021-12-21_12-37-24-0123.png

2021-12-21_21-02-37.png

2021-12-21_12-37-24.png

2021-12-21_12-44-59.png

 

2021-12-21_12-46-33.png

2021-12-21_12-48-10.png

2021-12-21_12-49-25.png

2021-12-21_12-37-24-2.png

2021-12-21_12-53-14.png

 

2021-12-21_12-55-22.png

2021-12-21_12-37-24-3.png

 

2021-12-21_12-57-44.png

2021-12-21_20-52-14.png

2021-12-21_20-56-27.png

2021-12-21_20-58-38.png

Hope this helps.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

 

 

 

invintern
Helper II
Helper II

Is this a full-time job, helping me with this Flow? Thank you so much for the help.

 

I don't see explicit instructions on the Composeitem action just after the Flow begins, underneath "When an event is added, updated or deleted (V3)." But judging by your later snips it LOOKS LIKE that compose function should have its "inputs" listed as 'activityid' - though I don't think that is right because your hover shows text "outputs('ComposeItem')?['activityid']" whereas mine says "outputs('ComposeItem)."

 

I will keep working, as the rest of it makes sense...so far!

 

Thanks again for the help.

 

 

As long as you enter this as an expression the flow should work:

2021-12-21_22-54-12.png

Power Automate sometimes changes the display name of the inputs. In the above example, the display name got changed to activityid when I later re-opened the flow again:

2021-12-21_22-51-07.png

 

In both case the expression is still:

outputs('ComposeItem2')?['activityid']

Ellis

 

invintern
Helper II
Helper II

(edit) Interesting. I have input the Expressions where you mentioned. Before I had selected the Dynamic Content output of the Compose action. I changed mine to make sure it's like yours. If you don't mind, I'd like to show you what I've got to see if you think it is good to activate.

 

I also have one final (maybe) question about your first Compose action. I didn't seem to use mine. Please let me know if I misunderstood.

 

invintern_6-1640128334777.png

 

 

invintern_4-1640128123018.pnginvintern_5-1640128131149.png

 

 

invintern_1-1640128034975.png

 

invintern_2-1640128071354.pnginvintern_3-1640128085742.png

 

I believe I have EXACTLY what you have, other than the icons by the expressions we were just talking about. Notice how in my 'update a row' section my expression is left with its Expression icon, whereas yours has the Compose icon.

 

Can I ask for one my favor from you, to check what I've got here and give me a thumbs up?

(1) Use the End time with time zone from the Outlook event - as the End time may be one of the fields that were changed. Same with Start time - which I take from the Outlook event - as the Start time may have changed too. Same again with Subject, Body, Location or any other column to you want to track the changes of.

 

2021-12-21_23-19-11.png

 

(2)  I'm not using an Apply to each loop - but the flow could still work with a loop. In my flow I am using the Compose action (ComposeItem) to select the record that was returned from the List rows action - so I can avoid using a loop.

 

(3) Optional - I usually include a compose action to keep some notes about the flow

2021-12-21_23-31-00.png

 

Or you can keep notes using the new Comments feature in Power Automate:

2021-12-21_23-34-27.png

2021-12-21_23-32-55.png

 Ellis

invintern
Helper II
Helper II

Wonderful,

 

I have made the changes you suggested to End Time (as well as start time, which I hadn't shown you!)

 

I didn't see anything from you saying it doesn't work.........so I think I am going to activate it tonight and see if it works as intended tomorrow morning.

 

I will report back with questions/updates and will be sure to give you that 'Accept as a solution,' just as soon as I know it works!

 

Thank you so much for the help.

-Ryan

invintern
Helper II
Helper II

Hello Ellis,

 

Naturally, Xmas holiday season is one where not many people are scheduling events on the calendar for testing purposes.

 

I had one Flow go off since I turned this one on and it 'ran successfully' but 'ActionBranchingConditionNotSatisfied. The execution of template action 'Compose_2' skipped: the branching condition for this action is not satisfied."

 

Snip:

invintern_0-1640194900330.png

Here is the condition: 'length(outputs('List_rows')?['body/value']) is greater than 0.

invintern_1-1640194992683.png

 

Thanks again.

 

This is the sample Output from my flow:

2021-12-22_17-47-37.png

(1) Check the List Rows action

2021-12-22_17-54-02.png

It is likely that you are updating a calendar event in Outlook - but that event does not exist in the Dataverse Appointments table? The flow was created later but the event was already in Outlook before the flow was created. Please confirm. If that is the case you will need to add some extra actions to deal with this situation.

 

(2) Please check the expression for the condition, you can copy-and-paste the expression below:

 

 

length(outputs('List_rows')?['body/value'])

 

 

 

 Ellis

invintern
Helper II
Helper II

Good point that maybe the Dataverse item does not exist, yet the Outlook may have been updated.

 

List rows looks like it's fine.

invintern_0-1640196416877.png

 

My condition uses 'length,' not 'first.' It is what you have written, though the final snip with 'first(outputs(...", though I can't seem to paste into my Expression box. That 'first(outputs(...' is what is written in my Compose 2, in the Update a row path.

 

Ok, if I have my inputs correct and the latest issue was that an event was updated that hadn't been added to the dataverse....it looks like we've got it right.

 

Thanks for the help, Ellis. I will write back if anything funny comes up.

This is more or less the the current flow:

Outlook Calendar Updating Datavers Appointments table-Basic Event Flow.png

 

You could update the flow for the "updated" condition to add a new appointment if none was found:

 

Outlook Calendar Updating Datavers Appointments table-Event flow with Update Actions.drawio.png

 

2021-12-22_17-47-37.png

 Ellis

 

Helpful resources

Announcements

Summer of Solutions | Week 3 Results | Win free tickets to the Power Platform Conference

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22  

Copilot Cookbook Challenge | WINNERS ANNOUNCED | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge random winners have been selected for the Challenge.  Thank you to everyone who participated in this challenge.    Copilot Cookbook Gallery:Power Apps Cookbook Gallery: 1. @swaminawale  1. @renatoromao     2.  @SpongYe  2.   @nickpotts10  *Please note if for any reason a winner declines, we will have another random drawing.   Check out all of the Cookbook Submissions: 1. Copilot Studio Cookbook Gallery: https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30WINNERS ANNOUNCED - JULY 8th     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge. Early Bird Submissions: @renato Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  n/a2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a   Week 2 Results:  Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Kasun_Pathirana1. ManishSolanki2. cloudatica2. madlad3. n/a3. SpongYe4. n/a4. n/a5. n/a5. n/a     Week 3 Results:  Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Parul_Yadav_Neo1. n/a2. SpongYe2. n/a3. n/a3. n/a4. n/a4. n/a5. n/a5. n/a   Week 4 Results:  Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. @nickpotts10  1. @ShrushtiShah  2. @Suniti_0020 2. @swaminawale 3. n/a3. @farukhis786 4. n/a4. @ManishSolanki  5. n/a5.  n/a

Important Update for Community Platform Access | READ ONLY July 16-22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Tuesday Tip | How to Become a Community Blog Author

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   This Week's Topic: How to Become a Community Blog Author We want YOU to be part of the community blog! Sharing your knowledge of Power Platform is an essential part of our community! Here's why:   It helps create a vibrant and dynamic community of makers who can learn from each other’s experiences and insights.It provides a platform for collaboration and innovation, where members can share their ideas and work together to develop new solutions.It helps promote Power Platform by showcasing its capabilities and real-world applications.It helps build trust and credibility in the community because you are providing valuable information and resources your fellow community members can use to improve their skills and knowledge. By sharing your knowledge of Power Platform in the community blog, you help us create a more engaged and informed community, better equipped to tackle complex challenges. To get started with blogging across the Power Platform communities, please visit the following links:   Power Apps: https://powerusers.microsoft.com/t5/Power-Apps-Community-Blog/bg-p/PowerAppsBlog Power Automate: https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog Copilot Studios: https://powerusers.microsoft.com/t5/Power-Virtual-Agents-Community/bg-p/PVACommunityBlogPower Pages: https://powerusers.microsoft.com/t5/Power-Pages-Community-Blog/bg-p/mpp_blog   When you follow the link, look for a button like the one below on the right rail of your community blog, and let us know you're interested. We can't wait to connect with you and help you get started. Thanks for being part of our incredible community--and thanks for becoming part of the community blog!  

June 2024 Community Newsletter

It's time for the June Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzcreativeopinionExpiscornovus Fubar AmikNived_NambiarPstork1OliverRodriguesmmbr1606ManishSolankifernandosilvaragavanrajanBCBuizerExpiscornovusrenatoromaoLucas001timlAlexEncodianViswavEmadBeshaiDBO_DVDeenujiUmiantaChrist0fGochixVishnuReddy1997citron-trucmandelaVishalJhaverieetuRoboJohanTprathyooanandm08VictorIvanidzenicoxrfm1964shashankbhidepaulbeck1 rpaa   LATEST NEWS Summer of Solutions 2024 The Summer of Solutions challenge kicked off this month - an amazing Microsoft Community initiative to win free tickets to the Power Platform Community Conferencethis September in Las Vegas. The challenge is NOW OPEN to all #PowerPlatform community members and will consist of four weekly entry periods until July 14th, 2024. Click the image below to find out more on how you can win free tickets to #PPCC24 by entering the Summer of Solutions TODAY!   Microsoft Customer Stories We're constantly working with an array of great businesses across the globe to assist them in taking advantage of the latest business applications technology. If you'd like to find out more about their low code journeys, click the image below to view our playlist of Customer Stories to discover how Accenture, Lumen Technologies, Cineplex, and many more, are streamlining their business processes with Microsoft Power Platform.     Microsoft Leap Program Have you heard of Microsoft Leap - a global program designed to recruit, develop, and upskill unconventional talent for careers in the tech space. Microsoft Leap organizes a number of pathways into the industry, including the recent "NFL Legend Cohort - Technical Program Management" run jointly with the NFL Player Care Foundation (PCF) who are dedicated to helping retired players improve their quality of life. Click the image below to find out more about the great day shared at the Redmond campus and be sure to visit the Microsoft Leap website to discover how this amazing initiative is helping re-launch the lives of countless individuals. www.leap.microsoft.com       UPCOMING EVENTS Biz Apps Partner Summit | Seattle | July 24-25 It's not long now until the Biz Apps Partner Summit, which takes place at the Hilton Bellevue in Seattle on July 24-25, 2024. This event is the perfect place to network, connect, and learn how to scale your Microsoft practice, drive profitable revenue, and dazzle your customers! There's a great selection of speakers, including the likes of Tom Patterson, Donald Kossmann Joseph Corigliano, Cecilia Flombaum, Peter Jensen, John Siefert, Becky Lymberis, Daniel Rippey, and many more. Click the image below to find out more and register today!     TechCon365 & Power Platform Conference | D.C. | August 12-16 Things are hotting up for the next TechCon365 & PWRCON Conference in Washington D.C. on August 12-16, 2024. Featuring the likes of Tamara Bredemus, Sunny Eltepu, Lindsay Shelton, Brian Alderman, Daniel Glenn, Julie Turner, Jim Novak, John White, Jason Himmelstein, Luc Labelle, Emily Mancini, MVP, UXMC, Fabian Williams, Emma Wiehe,and many more, this is the perfect event for those that are looking to gain invaluable insights from industry experts. Click the image below to grab your tickets today!     Power Platform Community Conference | Vegas | Sept. 18-20th Are you ready to come and join the fun in Las Vegas this September at PPCC24? This event is the perfect place to connect with fellow business applications enthusiasts and share your knowledge with the worldwide Microsoft Community. Now's your chance to hold all the aces. Just click the image below to find out more and we hope to see you go ALL-IN this September in Las Vegas!     For more events, click the image below to visit the Community Days website.  

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (5,303)