cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Rens_
Frequent Visitor

Error "ApprovalSubscriptionNotAllowed" when waiting on approval

We have a Flow where an approval is created, some steps are executed, and then the Flow will wait until the approval is executed. At the step of waiting on the approval to be done, I sometimes receive the error 'ApprovalSubscriptionNotAllowed'. I can't pinpoint when this is happening and when it's not.


It looks like the error isn't documented.

 

The full error message is the following:

 The request failed. Error code: 'ApprovalSubscriptionNotAllowed'. Error Message: 'Cannot wait on this approval in its current state.'. 

 

7G7FGrX

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions

 

Hi @Rens_ ,

 

Thank you for your reply!

I am afraid that I could not reproduce this issue on my side too.

Maybe this issue is related to the Common Data Service or Backend service.

If you want to solve this issue as soon as possible, please consider contact Microsoft Flow support to assist you with this issue. Engineers may need to crawl HTTP requests to help you analyze this problem, which can also solve your problem more efficiently.

12.PNG

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

View solution in original post

15 REPLIES 15
v-bacao-msft
Community Support
Community Support

 

Hi @Rens_ ,

 

I am afraid that I could not reproduce this issue on my side and we never encountered the issue before.

94.PNG

Please consider sharing the detailed configuration of the Flow so that we could analyze this issue further.

 

Besides, you could try to use Start and wait for an approval action to configure Flow instead of using these two actions.

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Hi Barry

 

Thanks for the feedback. I will try to change it to create and wait for approval. update: this isn't possible in our case as we are updating the list with the respond link

 

I can't reproduce the issue myself. Not on this tenant, not in this Flow, and not in other tenants. Any idea what the root cause of this issue is? Am I hitting some limits?

 

Thanks in advance.

 

 

Hi @Rens_ ,

 

Thank you for your reply!

I am afraid that I could not reproduce this issue on my side too.

Maybe this issue is related to the Common Data Service or Backend service.

If you want to solve this issue as soon as possible, please consider contact Microsoft Flow support to assist you with this issue. Engineers may need to crawl HTTP requests to help you analyze this problem, which can also solve your problem more efficiently.

12.PNG

 

Best Regards,

Community Support Team _ Barry
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Hi.

 

Did you found out what was causing this issue? If so, could you please share?

 

It is currently happening to me, and there is so little about it online!

 

Thank you.

I changed the action to 'Start and wait for approval'. When I saw this didn't meet the requirements, it was changed back to the separate start approval and wait for approval. It didn't show up since.

 

It once popped up for 1 time in another Flow, but it couldn't be reproduced so I'm afraid I don't have a correct solution for you. I didn't bothered contacting Flow support to dive into this issue. I probably would have done it if the issue still persisted. Maybe you can use the support of the Flow team and keep u posted about a good fix?

 

BR

Anonymous
Not applicable

We have the same error.

 

I think I found the issue too. We have the requirement to create an approval and get the outcome later on in a different flow (at least I decided to do that to have smaller and less complicated flows).

For this, I store the ApprovalID in a Sharepointelement after teh creation and the other flow waits for an approval which has that stored ID.

 

I get this error everytime. I think it is because the approval is already finished (approved/declined) before the wait-action in the second flow gets called. This will be the case almost everytime in our use-case, so I contacted the support.

 

If we find anything further I'll let you know.

 

 

Anonymous
Not applicable

Hello again,

 

I have been in touch with the microsoft support, and my theory has been confirmed. If you take action in an approval before the flow gets to the "Wait for approval", this error happens.

 

However, this is expected behavior from Microsoft and not a bug. Personally, I don't know why. What's the point in having the start-action and the wait-action separately if it can get an error everytime you approve before the wait-action gets called?

 

A workaround for this is to work with the CDS and get the approval response for the approval you created there with the "List records"-Action from the CDS.

 

I hope this helps people in the future looking for this error 😉

 

Best regards

This should be marked as answer instead. Thanks sir!

TaxusLapis
Advocate I
Advocate I

Hi @Rens_ ,

Even though this thread is old, I thought I'd add the solution I came up with so others might benefit.

I added a parallel branch. One branch contains the "wait for an approval", the other the notification. then I set a delay action to delay the sending of the notification so the "wait for an approval action" gets called earlier than anyone can react.
Parallel branch in approval scopeParallel branch in approval scope

 Cheers

stingray
Advocate III
Advocate III

Had a call from MS support this morning to say the issue has been resolved, ive re-submitted one of my affected Flows and its gone straight through to the Wait for Approval Action.

We seem to have a lot of issues using the Wait for approval action, but i update a master log list for history of approvals using the Approval ID,  there may be a better way of actioning this by way or a parallel branch and changing to the normal create and wait approval action.  

I had this issue today, so I'm afraid it still can happen that someone is faster than lightning 🙂

Hi PowerMar10, ive had this issue using the Wait for approval connector, but unfortunately there's not much that can be done if you have actions in between creating and waiting for the approval that take a time to complete, you could try adding these additional actions to a parallel branch depending on how your flow works and there isn't a dependency on them.
If you dont have any actions in between i roccomend using the Create and Wait for approval, lets hope the product team pull something ou the bag when the new sequential apporvals come in May from the new release wave.

Btw you will need to turn these features on in the Admin console, and make sure that anything they are removing feature wise isnt in your production environment, for example they will be removing the legacy datverse connector, so you would need to make sure any Flows etc are not using this and have been migrated to the latest one.

Hope that helps.

I logged a ticket with Microsoft and the outcome is:
"As this is an expected behavior, could you please confirm, can we close this ticket?"

I never knew that a bug is expected behavior before this time 😞

 

For those encountering this issue, the true cause is that the flow task "create an approval" reports as successful, as soon as it's handed off execution to the Dataverse approval sub-system, as opposed to waiting on Dataverse approval registration, (which can last more than a minute in my case,) to fully complete before reporting success and continuing flow execution.

 

This means that if you attempt to take action on an approval shortly after it's creation reported as successful in MS flow, it may in fact still be in the process of Dataverse registration and as such, unavailable for any actions (like awaiting the approval), resulting in Error code: 'ApprovalSubscriptionNotAllowed'. Error Message: 'Cannot wait on this approval in its current state.'.

 

If you are licensed to access Dataverse, then monitoring the status of the approval created there would certainly be the best workaround -

For those without Dataverse licensing, the recommended workaround from MS is to introduce adequate delay in business process to accommodate the approval creation time...but there is no clarity what this delay time value is be based on, or whether time required will remain a constant value or could be influenced by other factors.

 

That's a pretty large failure in my book: hope it might be helpful to others to understand the mechanism that could lead to this state based failure; Please open a ticket if you run into this, seems MS needs motivation to correct bugs.

Neros
New Member

I'm facing the same problem. I've created separated flow to work with Approvals. One is responsible for creating Approval (and I have an action after this to store the Approval ID on a SharePoint List). Other is responsible to collect approval outcome (action "Wait for approval" with the mentioned ApprovalID). 

The problem occurs with the second flow. I've tested a lot here, and I got a possible scenario: if the responsible responds the Approval immediately when it appears on Teams, the second flow get the "ApprovalSubscription" error. However, if they wait at least 1 minute to respond, the approval outcome is successfully collected. I couldn' tell why, but it have worked for me. 

Thing is, how we tell users to wait one minute to respond, when we cannot really fix this issue because we don't have full control of this integration?

lsheltonSTO1
Most Valuable Professional
Most Valuable Professional

Just got this error on two flows on a flow that's been running fine for months and has a pattern that I've used successfully for 2 years on similar approval flows.  I wouldn't think this is an issue of needing to add a delay because the file was locked for editing - the previous step took 30 minutes as you can see.

lsheltonSTO1_0-1710797709165.png

 

Helpful resources

Announcements

Check out the Copilot Studio Cookbook today!

We are excited to announce our new Copilot Cookbook Gallery in the Copilot Studio Community. We can't wait for you to share your expertise and your experience!    Join us for an amazing opportunity where you'll be one of the first to contribute to the Copilot Cookbook—your ultimate guide to mastering Microsoft Copilot. Whether you're seeking inspiration or grappling with a challenge while crafting apps, you probably already know that Copilot Cookbook is your reliable assistant, offering a wealth of tips and tricks at your fingertips--and we want you to add your expertise. What can you "cook" up?   Click this link to get started: https://aka.ms/CS_Copilot_Cookbook_Gallery   Don't miss out on this exclusive opportunity to be one of the first in the Community to share your app creation journey with Copilot. We'll be announcing a Cookbook Challenge very soon and want to make sure you one of the first "cooks" in the kitchen.   Don't miss your moment--start submitting in the Copilot Cookbook Gallery today!     Thank you,  Engagement Team

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Check Out the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community.  We can't wait to see what you "cook" up!    

Welcome to the Power Automate Community

You are now a part of a fast-growing vibrant group of peers and industry experts who are here to network, share knowledge, and even have a little fun.   Now that you are a member, you can enjoy the following resources:   Welcome to the Community   News & Announcements: The is your place to get all the latest news around community events and announcements. This is where we share with the community what is going on and how to participate.  Be sure to subscribe to this board and not miss an announcement.   Get Help with Power Automate Forums: If you're looking for support with any part of Power Automate, our forums are the place to go. From General Power Automate forums to Using Connectors, Building Flows and Using Flows.  You will find thousands of technical professionals, and Super Users with years of experience who are ready and eager to answer your questions. You now have the ability to post, reply and give "kudos" on the Power Automate community forums. Make sure you conduct a quick search before creating a new post because your question may have already been asked and answered. Galleries: The galleries are full of content and can assist you with information on creating a flow in our Webinars and Video Gallery, and the ability to share the flows you have created in the Power Automate Cookbook.  Stay connected with the Community Connections & How-To Videos from the Microsoft Community Team. Check out the awesome content being shared there today.   Power Automate Community Blog: Over the years, more than 700 Power Automate Community Blog articles have been written and published by our thriving community. Our community members have learned some excellent tips and have keen insights on the future of process automation. In the Power Automate Community Blog, you can read the latest Power Automate-related posts from our community blog authors around the world. Let us know if you'd like to become an author and contribute your own writing — everything Power Automate-related is welcome.   Community Support: Check out and learn more about Using the Community for tips & tricks. Let us know in the Community Feedback  board if you have any questions or comments about your community experience. Again, we are so excited to welcome you to the Microsoft Power Automate community family. Whether you are brand new to the world of process automation or you are a seasoned Power Automate veteran - our goal is to shape the community to be your 'go to' for support, networking, education, inspiration and encouragement as we enjoy this adventure together.     Power Automate Community Team

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Users online (5,209)