cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
AlexMB
Advocate I
Advocate I

Extract content from a loop within a loop

I have a flow that uses an AI Builder model to read incoming purchase order PDF's and write them as lines in an Excel sheet.

 

For this, the PDF's are split into individual pages.

 

I want to end up with an Excel file per PO, named with the PO.

 

My flow is set up like this:

Screenshot 2021-07-27 at 08.41.20.png

 

My issue is the final rename step.

 

I want to rename with the PO number, as extracted from the individual pages of the PDF.

 

However, this dynamic content is not available outside of the loop(s).

 

I guess I could rename inside of the loop, but I imagine it's bad practice to rename the same file over and over again? As 1 PDF = 1 PO it would make sense to only rename the file once, at the end.

1 ACCEPTED SOLUTION

Accepted Solutions
eliotcole
Super User
Super User

OK, if I'm reading you right, I think you need to just extract the PO Number at the right time.

 

Simply put, I think you should grab the data as a variable, and use that after the loop.

 

---

 

In Slightly More Detail

I would just say that you should Initialize variable, and make it string variable:

poIdVAR

It is string variable to account for input errors, but if it matters for later, you can convert it.

 

Then Set variable in the loop.

 

Explanation

So, I would assume from how you've phrased things that the purchase order number is either;

  • defined on every PDF split document that is created,
  • or it's listed as a form values that is on each split pages.

 

If this is the case, and the value doesn't change, then it won't hurt to just grab it on each pass.

 

However, if it is only defined on the first page, then you should just add a condition to check for it. Then if it is not present, the flow won't try to define it.

 

This means that once the many loops are done, you can take the variable name and apply it to whatever files, folders, worksheets, etc, that you like. 🙂

 

I can't really get much more detailed, or push out an example flow, because your process seems quite in-depth, there.

 

---

 

Hope this helps, but if not, I'm probably at a loss, mate, sorry.

View solution in original post

7 REPLIES 7
eliotcole
Super User
Super User

Sorry, @AlexMB , I'm a bit confused by the explanation, you say you want it to create an excel file per PO (purchase order, I presume) with the PO number as the filename.

 

That's great, it sounds like that's for the looped loop.

 

However, then you say you're renaming the file over and over, this is where I am getting confused. Sorry.

 

Again, apologies, I'm not asking as a 'gotcha' or anything, I just don't understand. 😅

 

Separately to all of that ... is there a reason that the original files need to be excel?

Thanks for you reply @eliotcole , and sorry for phrasing my self poorly.

 

I'll try to elaborate.

 

Each PDF is a separate PO and there will only ever be one PDF per PO. Meaning one flow = one PDF = one PO.

 

As AI Builder can't read multipage tables (yet) I have to resort to splitting the PDF into individual pages.

 

Again, every page is the same PO.

 

I then add each line from each PDF to the same Excel sheet.

 

Every line is still the same PO.

 

Now, if I rename my Excel inside the loop, it will rename the same file with the same name (PO number) over and over again for each repetition of the loop.

 

Is this fine to do it this way? A PDF might have 10 pages. Maybe I'm making problems out of nothing. But I just felt it would be more neat to rename the file once, after the flow is done.

 

The reason for needing Excel files is we can read these automatically into our ERP. We can't do that with PDF's.

eliotcole
Super User
Super User

OK, that's good to know (sorry about the delay).

 

I don't yet have a solution (and might not get one! 😅) but your flow indicates that the data on the PDF is PDF form data.

 

Did you know that the encodian connector has form data extraction?

Encodian - Connectors | Microsoft Docs

Get PDF Form Data – Encodian Customer Help

 

It looks like it will likely present the whole data as a single JSON object.

 

It's not even premium, apparently (but does need an Encodian account, I think).

 

Oh, and one question, could you tell me who you use for your ERP?

eliotcole
Super User
Super User

OK, if I'm reading you right, I think you need to just extract the PO Number at the right time.

 

Simply put, I think you should grab the data as a variable, and use that after the loop.

 

---

 

In Slightly More Detail

I would just say that you should Initialize variable, and make it string variable:

poIdVAR

It is string variable to account for input errors, but if it matters for later, you can convert it.

 

Then Set variable in the loop.

 

Explanation

So, I would assume from how you've phrased things that the purchase order number is either;

  • defined on every PDF split document that is created,
  • or it's listed as a form values that is on each split pages.

 

If this is the case, and the value doesn't change, then it won't hurt to just grab it on each pass.

 

However, if it is only defined on the first page, then you should just add a condition to check for it. Then if it is not present, the flow won't try to define it.

 

This means that once the many loops are done, you can take the variable name and apply it to whatever files, folders, worksheets, etc, that you like. 🙂

 

I can't really get much more detailed, or push out an example flow, because your process seems quite in-depth, there.

 

---

 

Hope this helps, but if not, I'm probably at a loss, mate, sorry.

AlexMB
Advocate I
Advocate I

Man, that solution was staring me right in the face.

 

Of course you are right.

 

Since the PO is the same within every loop I can just write it to a variable and then use that variable outside the loop.

 

I just tested and it works. Thanks so much for your help and for getting back to me on this!

No probs, mate!

 

It wasn't just a simple thought process for me, either, though, mate. So don't worry about stuff staring you in the face.

 

Lemme put it another way ... I could never do algebra at school, so I just guestimated numbers, and kept trying until they fit in the formulas.

 

Much of this is trial and error, but some things become muscle memory. The only thing I can advise is, start using variables for everything. 😉

Yeah, as is probably evident I'm still on the lower part of the learning curve here. 😄

 

I am definitely seeing a pattern, that variables are the solution to many things here on the board. I've just had a different question on here, where the solution was again to use variables, where I was relying on Dynamic Content.

 

I will adjust my approach accordingly. Thanks again for taking the time to help out!

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!  Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Users online (6,080)