cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
ArchieGoodwin
Advocate I
Advocate I

Extracting a substring from parsed JSON data in a Loop

I'm stumped on this one, folks.

I am taking JSON data from an online form, parsing it, and converting it into a .csv for import. I have built and tested a flow that works exactly as needed - almost. 

The online form gives users the option to enter information for anywhere from 0 to 10 children (family law intake). So, the JSON can contain data for 0 to 10 children. Incoming data for the fields contains either a six-or-eight-character Code, and then an explanation (it's in a drop-down on the online form). I need to export only a substring of that data (either the left 6 or 8 characters) into the .csv for import.

 

Problem is, I can't use Initialize Variable to do this within a loop (that will run x times, where x = 0 to 10).

Is there a way to substring just the raw parsed JSON data so I only grab the characters I need for inclusion in the variable table I have created for the data (prior to export to .csv)? I have tried to use the 'substring' expression, but it won't even let me select the variable I need from within the sub-data for "CHILDINV" - I'm stuck.

Child Data Loop.JPG

27 REPLIES 27
ArchieGoodwin
Advocate I
Advocate I

No, we want a consistent header line, even if there is no data in the field below. Makes it easier that way.

@Paulie78 's solution looks a bit less daunting tbh, but I'm stuck on understanding how he is referencing the fields.

 

I now see that doing it the way I was doing it, via variables, is long and cumbersome - this "compose" function makes it more of a one-shot schema creation. As much as I hate to throw away what I have done already, I like that it moves all of the expressions and fiddling with the data into one place.

I have lots to learn on this stuff, it's only the first of many I am going to have to create. Thanks so much for your patience and efforts thus far.

If you need help building it reach out via private message and will get you started off.

It does produce two rows, perhaps I copied the wrong scope. Will check in a moment. 

eliotcole
Super User
Super User

Absolutely, @ArchieGoodwin, here's a solution which produces all the rows, all the headers, and the full 10 kids.

 

I'll admit that were this me I'd space out the logic a bit more so that others won't be blinded by the long expressions on show. One of the main things I try to show folks in a work environment that Power Automate makes an office less reliable on Jon/Janey and their wizard excel formulas. As soon as you start sprinkling long 'formula' everywhere here, anyone taking over the management of it might still be a bit taken aback.

 

If I were to do that here, I might make the two sides of that union in the CSV separate object variables then reference them.


Solution

This solution is transferrable if you want to apply it to more than one array in the original data.

finally.jpg

@Paulie78 thanks for the help, and for the range fiddle, too! I had originally done ten fields that long way, and thought that there *had* to be a way to get it done with less typing. 😅


Code

kidsVAR

This just counts the number of kids, and subtracts it by one. This saves overcomplicating the multiple if() statements in the Select action.

 

 

sub(length(variables('jsonInputVAR')?['body']?['CHILDINV']), 1)

 

 

SelectKidsData

In the 'From' field this uses a trick that Paulie taught me elsewhere, the range() function. So it iterates through 10 items, regardless.

 

 

range(0, 10)

 

 

In the 'Map' 'key' fields (left), this uses some basis logic looking at the current item() number in the range, and adds 1. This provides your child number.

 

 

add(item(), 1)

 

 

In the 'Map' 'value' fields (right), this uses a simple condition. If the current item() number is greater than the number returned in the kidsVAR variable, then it places nothing ('') in the field, otherwise it picks the child data that is correspondent to the current item() number. It looks like more than it is. 👍

 

 

if(greater(item(), variables('kidsVAR')), '', variables('jsonInputVAR')?['body']?['CHILDINV'][item()]['Id'])

if(greater(item(), variables('kidsVAR')), '', variables('jsonInputVAR')?['body']?['CHILDINV'][item()]['C1NAME'])

if(greater(item(), variables('kidsVAR')), '', variables('jsonInputVAR')?['body']?['CHILDINV'][item()]['C1BD'])

if(greater(item(), variables('kidsVAR')), '', variables('jsonInputVAR')?['body']?['CHILDINV'][item()]['Gender'])

if(greater(item(), variables('kidsVAR')), '', variables('jsonInputVAR')?['body']?['CHILDINV'][item()]['C1LEGAL'])

if(greater(item(), variables('kidsVAR')), '', variables('jsonInputVAR')?['body']?['CHILDINV'][item()]['C1PHYS'])

if(greater(item(), variables('kidsVAR')), '', variables('jsonInputVAR')?['body']?['CHILDINV'][item()]['C1VISIT'])

if(greater(item(), variables('kidsVAR')), '', variables('jsonInputVAR')?['body']?['CHILDINV'][item()]['FIELD8'])

if(greater(item(), variables('kidsVAR')), '', variables('jsonInputVAR')?['body']?['CHILDINV'][item()]['ItemNumber'])

 

 

Create CSV Table

This one is basically constructing an array for the Create CSV Table action to make its data from. Don't forget to place the square brackets around it in the 'From' field:

 

 

union(removeProperty(variables('jsonInputVAR')?['body'], 'CHILDINV') , json(replace(join(body('SelectKidsData'), ', '), '}, {', ',')))

 

 

The union() function is usually used to join two arrays together, but it works with objects, too, so the main thing here is ensuring that the child data is represented as an object instead of an array, after the previous Select action has done its thing.

 

So, in the second section of that union function this is done by:

  1. Using a join() function to join the separate children items together in a string value.
  2. Once they're in the string, they're still actually separated by curly brackets, so the replace() function removes the ones separating the children '}, {', and puts a normal comma in their place.
  3. Then finally the json() function makes that all readable by the union otherwise it would error thinking it's just a string.

 

The first part is getting all the non-child data by simply using the removeProperty() function to strip the CHILDINV data out of the original object.

 

Additional Arrays

To apply this to other fields in the original JSON just requires a few tweaks. Let's look at the potential for the DOCUMENTS array field to need it.

  1. Add a branch after the input.
  2. Initialise a docsVAR integer variable in the new branch to count the items in DOCUMENTS.
  3. For the Select copy the original and edit it to save time to SelectDocsData.
  4. Change the letters either side of the add(item(),1) expressions in the key fields to make your document headers.
  5. Edit each value to point to DOCUMENTS instead of CHILDINV, the new docsVAR for the counts, and change the referenced field names.
  6. Finally, bridge the branches with the CSV:

 

union(removeProperty(removeProperty(variables('jsonInputVAR')?['body'], 'CHILDINV'), 'DOCUMENTS') , json(replace(join(body('SelectKidsData'), ', '), '}, {', ',')) , json(replace(join(body('SelectDocsData'), ', '), '}, {', ',')))

 

If there is no set limit to the documents, then take the docsVAR and add 1 to it for the other side of the range() expression.

 

EDIT - I've tested this on ten children ... and they're all still alive to tell the tale!

One teeny tiny problem. I can't figure out how to put the SUBSTRING instruction into the map. I keep getting "invalid expression" errors; how do I grab only, say, the first 6 characters in C1LEGAL for example? I know it's probably a syntax issue.

Where would you squeeze in the SUBSTRING?

Also - I really only need the CHILD output from this, because I don't carry across all the fields, only ones I need. But, if I try to create a CSV table from OUTPUT, there are a bunch of extra commas in there that I don't need.

Thoughts?

eliotcole
Super User
Super User

(sorry, was weirdly scared to come back in case it wasn't a good solution!)

 

I'm glad all is good, @ArchieGoodwin  ... apologies if I'd misunderstood. But given your responses after Paulie mentioned ensuring there were 10 kids each time, I thought the extra data was what you were after there.

 

Those extra commas in the example of 4 children are the empty children 5-10. (or empty fields in the base data)

 

If you wish to have only what's there (for the kids, at least), that's more simple, just change the SelectKidsData to be like in my OG solution with the ['body']?['CHILDINV'] source, item()['ItemNumber'] for the numbered keys, and reference the fields accordingly (item()?['Id']) on the value side. You can delete the count, too.

02 - Kids Data OG.jpg

 

 

SUBSTRING

This part is thankfully easy, I'll give you two ways you can do it and hopefully the first is the way that it can be done easiest.

 

Method One - Add An Extra Select Value

This assumes that you will always have "TEXT - TEXT", meaning that there is always that space-hyphen-space, there.

 

On the 'Key' side it will be however you like, as before. I labelled mine as C3LGLSh (where the 3 is the expression).

 

On the 'Value' side it will be:

 

if(greater(item(), variables('kidsVAR')), '', first(split(variables('jsonInputVAR')?['body']?['CHILDINV'][item()]['C1LEGAL'], ' - ')))

 

You are splitting the "CLIENT - sdfkjhsfgldihsd fg" text on that ' - ', and then with the array that returns you take the first item. A safer bet might be to split on just the hypen, and then wrap the first() in a trim() expression.

 

This ensures that you are always going to get whatever text is there, even if it's longer than 6 characters.

 

Method Two - Substring

If you really have to use substring, then this would work with the otherwise same setup as the first method:

 

 

if(greater(item(), variables('kidsVAR')), '', substring(variables('jsonInputVAR')?['body']?['CHILDINV'][item()]['C1LEGAL'], 0, 6))

 

 

It definitely works, just tested, I just feel that the split+first (+trim!) method is going to be better data capture long term.

 

 

KIDS ONLY!

If you only need the CHILD output, then you can junk the union() expression and just keep the second half of it. So, non-code view thats:

[

  json(repl...)

]

In the json() you'd have:

 

json(replace(join(body('SelectKidsData'), ', '), '}, {', ','))

 

 

NONSENSE STUFFS 😉

There's a few ways to go about the unimportant fields.

  1. Filter - Filter out stuff you don't want, try to use branching if you can to keep the original data available when needed.
  2. Handle Externally - Keep the extra fields, and handle the relevant output on the other end. You then have that data when you need it.
  3. Layered Property Removal - removeProperty() layers to remove the fields you don't currently need.
  4. Explicit Select Fields - Use Paulie's setup to be very exact precisely which field and where you're taking data from.

#2 would be the most accepted/normal way. For example if you were querying an API for data, you would take what you get, and use what you need.

 

With #3 you just layer it up, like this:

 

removeProperty(removeProperty(variables('jsonInputVAR')?['body'], 'CHILDINV'), 'DOCUMENTS')

 

That would supply an object with all the original fields except the CHILDINV, and DOCUMENTS, fields. 

 

Here's one more image to assist, this one has all 10 kids included, obviously:

extra bitz.jpg

 

Helpful resources

Announcements

Summer of Solutions | Week 3 Results | Win free tickets to the Power Platform Conference

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22  

Copilot Cookbook Challenge | WINNERS ANNOUNCED | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge random winners have been selected for the Challenge.  Thank you to everyone who participated in this challenge.    Copilot Cookbook Gallery:Power Apps Cookbook Gallery: 1. @swaminawale  1. @renatoromao     2.  @SpongYe  2.   @nickpotts10  *Please note if for any reason a winner declines, we will have another random drawing.   Check out all of the Cookbook Submissions: 1. Copilot Studio Cookbook Gallery: https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30WINNERS ANNOUNCED - JULY 8th     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge. Early Bird Submissions: @renato Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  n/a2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a   Week 2 Results:  Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Kasun_Pathirana1. ManishSolanki2. cloudatica2. madlad3. n/a3. SpongYe4. n/a4. n/a5. n/a5. n/a     Week 3 Results:  Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Parul_Yadav_Neo1. n/a2. SpongYe2. n/a3. n/a3. n/a4. n/a4. n/a5. n/a5. n/a   Week 4 Results:  Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. @nickpotts10  1. @ShrushtiShah  2. @Suniti_0020 2. @swaminawale 3. n/a3. @farukhis786 4. n/a4. @ManishSolanki  5. n/a5.  n/a

Important Update for Community Platform Access | READ ONLY July 16-22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Tuesday Tip | How to Become a Community Blog Author

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   This Week's Topic: How to Become a Community Blog Author We want YOU to be part of the community blog! Sharing your knowledge of Power Platform is an essential part of our community! Here's why:   It helps create a vibrant and dynamic community of makers who can learn from each other’s experiences and insights.It provides a platform for collaboration and innovation, where members can share their ideas and work together to develop new solutions.It helps promote Power Platform by showcasing its capabilities and real-world applications.It helps build trust and credibility in the community because you are providing valuable information and resources your fellow community members can use to improve their skills and knowledge. By sharing your knowledge of Power Platform in the community blog, you help us create a more engaged and informed community, better equipped to tackle complex challenges. To get started with blogging across the Power Platform communities, please visit the following links:   Power Apps: https://powerusers.microsoft.com/t5/Power-Apps-Community-Blog/bg-p/PowerAppsBlog Power Automate: https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog Copilot Studios: https://powerusers.microsoft.com/t5/Power-Virtual-Agents-Community/bg-p/PVACommunityBlogPower Pages: https://powerusers.microsoft.com/t5/Power-Pages-Community-Blog/bg-p/mpp_blog   When you follow the link, look for a button like the one below on the right rail of your community blog, and let us know you're interested. We can't wait to connect with you and help you get started. Thanks for being part of our incredible community--and thanks for becoming part of the community blog!  

June 2024 Community Newsletter

It's time for the June Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzcreativeopinionExpiscornovus Fubar AmikNived_NambiarPstork1OliverRodriguesmmbr1606ManishSolankifernandosilvaragavanrajanBCBuizerExpiscornovusrenatoromaoLucas001timlAlexEncodianViswavEmadBeshaiDBO_DVDeenujiUmiantaChrist0fGochixVishnuReddy1997citron-trucmandelaVishalJhaverieetuRoboJohanTprathyooanandm08VictorIvanidzenicoxrfm1964shashankbhidepaulbeck1 rpaa   LATEST NEWS Summer of Solutions 2024 The Summer of Solutions challenge kicked off this month - an amazing Microsoft Community initiative to win free tickets to the Power Platform Community Conferencethis September in Las Vegas. The challenge is NOW OPEN to all #PowerPlatform community members and will consist of four weekly entry periods until July 14th, 2024. Click the image below to find out more on how you can win free tickets to #PPCC24 by entering the Summer of Solutions TODAY!   Microsoft Customer Stories We're constantly working with an array of great businesses across the globe to assist them in taking advantage of the latest business applications technology. If you'd like to find out more about their low code journeys, click the image below to view our playlist of Customer Stories to discover how Accenture, Lumen Technologies, Cineplex, and many more, are streamlining their business processes with Microsoft Power Platform.     Microsoft Leap Program Have you heard of Microsoft Leap - a global program designed to recruit, develop, and upskill unconventional talent for careers in the tech space. Microsoft Leap organizes a number of pathways into the industry, including the recent "NFL Legend Cohort - Technical Program Management" run jointly with the NFL Player Care Foundation (PCF) who are dedicated to helping retired players improve their quality of life. Click the image below to find out more about the great day shared at the Redmond campus and be sure to visit the Microsoft Leap website to discover how this amazing initiative is helping re-launch the lives of countless individuals. www.leap.microsoft.com       UPCOMING EVENTS Biz Apps Partner Summit | Seattle | July 24-25 It's not long now until the Biz Apps Partner Summit, which takes place at the Hilton Bellevue in Seattle on July 24-25, 2024. This event is the perfect place to network, connect, and learn how to scale your Microsoft practice, drive profitable revenue, and dazzle your customers! There's a great selection of speakers, including the likes of Tom Patterson, Donald Kossmann Joseph Corigliano, Cecilia Flombaum, Peter Jensen, John Siefert, Becky Lymberis, Daniel Rippey, and many more. Click the image below to find out more and register today!     TechCon365 & Power Platform Conference | D.C. | August 12-16 Things are hotting up for the next TechCon365 & PWRCON Conference in Washington D.C. on August 12-16, 2024. Featuring the likes of Tamara Bredemus, Sunny Eltepu, Lindsay Shelton, Brian Alderman, Daniel Glenn, Julie Turner, Jim Novak, John White, Jason Himmelstein, Luc Labelle, Emily Mancini, MVP, UXMC, Fabian Williams, Emma Wiehe,and many more, this is the perfect event for those that are looking to gain invaluable insights from industry experts. Click the image below to grab your tickets today!     Power Platform Community Conference | Vegas | Sept. 18-20th Are you ready to come and join the fun in Las Vegas this September at PPCC24? This event is the perfect place to connect with fellow business applications enthusiasts and share your knowledge with the worldwide Microsoft Community. Now's your chance to hold all the aces. Just click the image below to find out more and we hope to see you go ALL-IN this September in Las Vegas!     For more events, click the image below to visit the Community Days website.  

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (3,304)