cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
GurBAL
Advocate I
Advocate I

Find Dynamics 365 contactid Associated With Specific Email Address

I have built a flow that will create a Dynamics 365 task when I copy an email (the "Target Email") to a specific folder in Outlook 365.  The flow is working so far, but I am trying to make 2 enhancements and am not sure how to get them done.  The current, working flow is below.

 

I would like to check the D365 Contact entity for the presence of the Target Email's recipient, which could be in emailaddress1, emailaddress2 or emailaddress3.  If the email address exists, I would like to set the task's Regarding field to the relevant Contact.  I assume I need to grab the contactid of the relevant Contact to facilitate this, but I don't know how to accomplish that.  Once I have the contactid, is it as simple as inserting that variable into the task's Regarding field, or is there more to it?

 

There is one more complication that I can't figure out.  The Target Email may have multiple recipients.  How do I isolate each email address so that I can create a separate task for each, and check each one against the Contact database per the paragraph above?

 

Thanks for the help!

 

Flow pt1 20200306.pngFlow pt2 20200306.pngFlow pt3 20200306.pngFlow pt4 20200306.png

1 ACCEPTED SOLUTION

Accepted Solutions
abm
Most Valuable Professional
Most Valuable Professional

Hi @GurBAL 

 

After initialise mapping add a compose and do a split against the initialise variable.

 

Can we do a screen share please? That will be much easier.

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

View solution in original post

13 REPLIES 13
abm
Most Valuable Professional
Most Valuable Professional

Hi @GurBAL 

 

To get the contact details you need to filter by email address 1, 2, and 3.

 

See below

 

image.png

 

Here I am assuming email address will be unique in your contact lists.

 

The expression I used to find the count is as follows

length(body('List_records_2')?['value'])
 
This IF condition determines whether the record exists or not. Then under the yes condition you can add the rest of the logic to get the contact id. Because you are using list items flow will construct a loop once you map the contact unique identifier even if there is only one record.
 
The other question is asked is about how to split the email address.
 
You can use the split expression to get each email address.
 
Please see below example
 
image.png

 

The expression I used for the above compose 2 is as follows:

split(variables('EmailAddresses'),';')
 
Try using the above flow action methods and let me know how it goes.
 
Thanks


Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Thanks so much for the guidance @abm!  I have tried implementing your solution but am doing something wrong.  I am getting the following error: "The inputs of workflow run action 'Compose' of type 'Compose' are not valid. The variable 'EmailAddresses' must be initialized before it can be used inside action 'Compose'."

 

I added your 'split' subroutine first, then added the 'filter' subroutine.  See steps below.  I played around with the variable EmailAddress a bit but it didn't fix anything.  I tried initializing it as "a@a.com;b@b.com@;c@c.com" and as the output of "Grab Recipients", and also tried Set Variable for EmailAddress to Grab Recipients.

 

Here is the state of that section of the flow:

Flow pt1 20200309.png

abm
Most Valuable Professional
Most Valuable Professional

Hi @GurBAL 

 

Thanks for your reply. Looks like your Set Variable mapping to an output of some other compose. Is this need to change to the previous step which is intialise variable.



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

I'm not following that.  Sounds like you're saying that I need to make the Value of the Set Variable step equal to Initialize Variable step?  When I try that, I get this error: "The inputs of workflow run action 'Set_variable' of type 'SetVariable' are not valid. Self reference is not supported when updating the value of variable 'EmailAddress'."  

 

Also, I should note that I didn't see a Set Variable step in your initial post.  I added it while I was troubleshooting (although it didn't fix anything).

abm
Most Valuable Professional
Most Valuable Professional

Hi @GurBAL 

 

Could you post a screen shot of your full flow and run time history where which step is failing?



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

I took screenshots of the current flow, and of the results of a test run.  Here is the current flow:

Flow full1 20200309.pngFlow full2 20200309.pngFlow full3 20200309.pngFlow full4 20200309.pngFlow full5 20200309.pngFlow full6 20200309.png

 

And here are the results of the run test:

Flow testA-1 20200309.pngFlow testA-2 20200309.pngFlow testA-3 20200309.pngFlow testA-4 20200309.pngFlow testA-5 20200309.png

abm
Most Valuable Professional
Most Valuable Professional

Hi @GurBAL 

 

Thanks for the screenshot. Could you please tell me after the initialize variable you are setting variable name value to some other output? You already initialised with certain values and replaced immediately after the next step? Which ever output you are mapping is not having a comma separated values hence its not returning as array for the split and getting the flow error.

 

image.png



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials


@abm wrote:

Hi @GurBAL 

 

... Could you please tell me after the initialize variable you are setting variable name value to some other output? ...


That is set to the output of the "Grab Recipients" step.  You didn't have a Set Variable step in your suggestion, and I wasn't sure if one was necessary after an Initialize Variable step.  So when the flow wasn't working, I added the Set Variable step to see if it solved the problem (which it didn't). 

 

Do I need to Set a variable after I initialize it, or should I just delete it?  If not, is the string in the Initialize Variable step correct?  I have "a@a.com;b@b.com@;c@c.com", which I copied from your example.  The 'at' signs look oddly placed, and I don't know if this will work when I have a recipient with a domain that isn't dotcom.

 

Thanks!

abm
Most Valuable Professional
Most Valuable Professional

Hi @GurBAL 

 

You can delete this step and directly map the values under the initialise. Yes that was a typo from my side. You need to make sure Grab Recipients returns with similar format where you can split the values after using the semi-colon. If you need a screen share and fix please send me the details by email.

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Making progress!  I have cleaned it up, but the test is still failing at the 'split' formula.  I get this error:

"ExpressionEvaluationFailed. The execution of template action 'Apply_to_each_email_address' failed: the result of the evaluation of 'foreach' expression '@outputs('Split_EmailAddress')' is of type 'String'. The result must be a valid array."

 

But when I change that to array, I get the following error at the step that initializes the email address variable:

"BadRequest. The variable 'EmailRecipients' of type 'Array' cannot be initialized or updated with value 'recipient@contoso.com' of type 'String'. The variable 'EmailRecipients' only supports values of types 'Array'."

abm
Most Valuable Professional
Most Valuable Professional

Hi @GurBAL 

 

After initialise mapping add a compose and do a split against the initialise variable.

 

Can we do a screen share please? That will be much easier.

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

PMing you screenshare details now...

abm
Most Valuable Professional
Most Valuable Professional

Hi @GurBAL 

 

Thanks for the screen share. Hope it was useful. If you have any more questions please post it. It's an awesome community.😀



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Helpful resources

Announcements

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Getting Started with Private Messages & Macros

Welcome to TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   This Week's Tip: Private Messaging & Macros in Power Apps Community   Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member!   Our Knowledge Base article about private messaging and macros is the best place to find out more. Check it out today and discover some key tips and tricks when it comes to messages and macros:   Private Messaging: Learn how to enable private messages in your community profile and ensure you’re connected with other community membersMacros Explained: Discover the convenience of macros—prewritten text snippets that save time when posting in forums or sending private messagesCreating Macros: Follow simple steps to create your own macros for efficient communication within the Power Apps CommunityUsage Guide: Understand how to apply macros in posts and private messages, enhancing your interaction with the Community For detailed instructions and more information, visit the full page in your community today:Power Apps: Enabling Private Messaging & How to Use Macros (Power Apps)Power Automate: Enabling Private Messaging & How to Use Macros (Power Automate)  Copilot Studio: Enabling Private Messaging &How to Use Macros (Copilot Studio) Power Pages: Enabling Private Messaging & How to Use Macros (Power Pages)

Tuesday Tip: Subscriptions & Notifications

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week: All About Subscriptions & Notifications We don't want you to a miss a thing in the Community! The best way to make sure you know what's going on in the News & Announcements, to blogs you follow, or forums and galleries you're interested in is to subscribe! These subscriptions ensure you receive automated messages about the most recent posts and replies. Even better, there are multiple ways you can subscribe to content and boards in the community! (Please note: if you have created an AAD (Azure Active Directory) account you won't be able to receive e-mail notifications.)   Subscribing to a Category  When you're looking at the entire category, select from the Options drop down and choose Subscribe.     You can then choose to Subscribe to all of the boards or select only the boards you want to receive notifications. When you're satisfied with your choices, click Save.     Subscribing to a Topic You can also subscribe to a single topic by clicking Subscribe from the Options drop down menu, while you are viewing the topic or in the General board overview, respectively.     Subscribing to a Label Find the labels at the bottom left of a post.From a particular post with a label, click on the label to filter by that label. This opens a window containing a list of posts with the label you have selected. Click Subscribe.     Note: You can only subscribe to a label at the board level. If you subscribe to a label named 'Copilot' at board #1, it will not automatically subscribe you to an identically named label at board #2. You will have to subscribe twice, once at each board.   Bookmarks Just like you can subscribe to topics and categories, you can also bookmark topics and boards from the same menus! Simply go to the Topic Options drop down menu to bookmark a topic or the Options drop down to bookmark a board. The difference between subscribing and bookmarking is that subscriptions provide you with notifications, whereas bookmarks provide you a static way of easily accessing your favorite boards from the My subscriptions area.   Managing & Viewing Your Subscriptions & Bookmarks To manage your subscriptions, click on your avatar and select My subscriptions from the drop-down menu.     From the Subscriptions & Notifications tab, you can manage your subscriptions, including your e-mail subscription options, your bookmarks, your notification settings, and your email notification format.     You can see a list of all your subscriptions and bookmarks and choose which ones to delete, either individually or in bulk, by checking multiple boxes.     A Note on Following Friends on Mobile Adding someone as a friend or selecting Follow in the mobile view does not allow you to subscribe to their activity feed. You will merely be able to see your friends’ biography, other personal information, or online status, and send messages more quickly by choosing who to send the message to from a list, as opposed to having to search by username.

Users online (5,647)