cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
ASLR
Helper I
Helper I

Flow Emails are coming from the creator rather than Microsoft Flow.

Hi guys, 

 

I've created a request manager approval from team's flow within flow for the organization. The issue I'm facing is that all the requests sent to the manager's and other relevant users when the flow is triggered is coming from myself instead of the default Microsoft Flow. Is there a way to change this so that it shows that the requests are coming from Microsoft Flow instead of myself in the email itself?

 

Thanks a mil, 

 

Regards, 

Artie 

2 ACCEPTED SOLUTIONS

Accepted Solutions
Tacsi
Advocate II
Advocate II

Can I suggest you use the mail connector rather than outlook connector.

 

View solution in original post

Hi Guys, 

 

Thanks for all the suggestions. 

 

The issue was resolved by adding an Alias to the account for the emails to be sent from that username, after a few hours it started to sync properly and emails were coming from the new alias and eventually started to come from the Microsoft Flow account. 

 

In the future, I would recommend any flows that are being built for the organization should be done by using a Service account to avoid this. 

 

Thanks again for the assistance, 

 

Regards, 

Aslr12

View solution in original post

14 REPLIES 14
v-yamao-msft
Community Support
Community Support

Hi ASLR,

 

I am afraid that it might be a default behavior. An approval email will be sent out from the email account who set up the flow, but neither the one who start up the application nor Microsoft Flow.

 

I would suggest you submit a request at Flow Ideas Forum, I will help collect and report it on my side. Hope it can be taken into consideration in the future releases:

https://powerusers.microsoft.com/t5/Flow-Ideas/idb-p/FlowIdeas

 

Best regards,

Mabel Mao        

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Tacsi
Advocate II
Advocate II

Can I suggest you use the mail connector rather than outlook connector.

 

Hi Guys, 

 

Thanks for all the suggestions. 

 

The issue was resolved by adding an Alias to the account for the emails to be sent from that username, after a few hours it started to sync properly and emails were coming from the new alias and eventually started to come from the Microsoft Flow account. 

 

In the future, I would recommend any flows that are being built for the organization should be done by using a Service account to avoid this. 

 

Thanks again for the assistance, 

 

Regards, 

Aslr12

@ASLR

 

Do you mind sharing the instructions to add an alias ?

Thanks Max

Sure no problem. 

 

Go to Office 365 Admin Center 

Click Active Users 

Select the user you wish to add the alias to 

Their profile will appear 

click on Edit to add alias 

Add the alias 

Change Display Name 

(Make the Alias the primary email if you want the emails to come from that account)

Give it about an hour or so for it to sync across all applications. 

 

Note if you make the alias primary you will need to sign in to Office 365 with the new email moving forward. 

 

Hope this helps. 

 

Regards, 

ASLR12

Thank you @ASLR

Hi - this is really useful, but does the alias affect normal emails too if it's set as the primary?
I wouldn't want my standard emails to come from an alias account.

 

Thank you

Hi, 

 

Somehow changing the alias fixed the issue for the emails being sent by the user who created the flow to the default email from Microsoft Flow (it can take from an hour to 24 hours for the changes to take effect) 

 

Emails would be sent from the alias account created if you set it as the primary. Once the issue is resolved you can probably set back the old email you were working with as the primary. 

 

Regards, 

 

 

YukeshkumarR
Frequent Visitor

Is there any other way im also getting the same .

 

Mail is received from my Emial ID for notification of submission instead of default Microsoft flow.

Anonymous
Not applicable

How did you happen to add an Alias to the account? Thanks! 

@Anonymous

 

Hi meggy > Use the advanced options on the send email > You will see a Send as Field.

Hope this helps.

 

Capture.PNG

For send as you need addtional account to be added by administrater . 

(i.e.,) Alias account . 

 

As a user how we can do it .

 

 

Best Regards,

Yukeshkumar R

@YukeshkumarR

 

For send as a different user > I had the user add me to their exchange mailbox as a delegate

This is not acceptable.

Atleast the mail should be sent by site or subsite name like sharepoint designer.

 

Best Regards,

Yukeshkumar R

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!  Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Users online (5,245)