cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Flow Not Starting - SharePoint Item Modified

Hi,

 

I have a Flow that is supposed to run when an item is new or modified. I have verified that I am using the new or modified trigger - clicking on the "View Operation" button says "Triggers when an item is created, and also each time it is modified." And yet, sometimes it just doesn't run. Other times I edit an item in SharePoint and it will run on the item I've edited plus others which I did not edit (at least not recently). It's possible that the two are related: it doesn't run when I want it to, but then editing something else discovers that I had previously edited something else. I haven't done enough testing to be confident in that theory, but I am more concerned about the failure to run than the extra runs.

 

In any case, with this Flow it is really important for configuring permissions that it runs within a few minutes. We have already had at least a dozen times where the Flow didn't run but the list says the item is up-to-date so there has been significant confusion about the discrepancy.

 

Any ideas of how to fix this? If it's just a bug, it's a major one and has been there for weeks if not months.

31 REPLIES 31
v-yamao-msft
Community Support
Community Support

Hi @Anonymous,

 

It seems that you are using the SharePoint trigger When an item is created or modified. When using this trigger, flow will be fired when an item is created or modified.

 

You said that “it will run on the item I've edited plus others which I did not edit ”, do you mean that the flow even run when you do no changes on the list?

 

Which Flow Plan are you using? Have you configured the Limit columns by view? How is your flow created?

 

Please share more details on your flow to help reproduce this issue on my side.

 

 

Best regards,

Mabel Mao

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

You said that “it will run on the item I've edited plus others which I did not edit ”, do you mean that the flow even run when you do no changes on the list?

 

It doesn't run on no changes on the list, but it will run on changes to a different item. I've seen this on multiple Flows using the same trigger. For example, here's what just happened in my latest test:

 

Yesterday I attempted about a dozen times to run on a particular item (item1). It would not run on any of those attempts. Today I attempted to run it on a different item (item2). It ran on item2, and also ran on item1 just once, not for every time I tried yesterday. There's nothing obviously different about the content of item1 vs item2, and some previous tests seemed to rule out the possibility that it works for some items but not others - I tried changing the same one multiple times and sometimes it worked and sometimes didn't.

 

Which Flow Plan are you using? Have you configured the Limit columns by view? How is your flow created?

 

This particular account is an Office365 E3 and there's at least two Flows with the problem (different lists). I also have a Business Essentials account on a completely different tenant. I thought I had seen the same problem there before, but I just did about 6 tests and they all worked, so maybe not.

 

I was not using the limit columns by view. I decided to try that now with a view that has 6 columns, tested updating an item twice, and still no Flow runs. I took that a step further and made sure that the column I was changing was in that view, but that didn't fix it either.

 

All were all created in a browser from flow.microsoft.com. 

Anonymous
Not applicable

I'll add that I just tried rebuilding the Flow from scratch, turning off the other one, in case there was something broken elsewhere in the Flow. This is the entire Flow right now and it still has the problem:

 

- Trigger when an item is created or modified on the list with limiting columns by view.

- Initialize a variable that is a direct copy of one of the columns in the list item

 

Still won't even start when I change an item in the list. I'm sure it used to be more like 50/50 if it would work and now it seems to be more like 95/5 that it is not going to work. That's a guess, not a scientific calculation.

Hi @Anonymous,

 

What specific view is the flow using? Please share more details on it.

 

I am trying to reproduce this issue on my side.

 

Best regards,

Mabel Mao

Community Support Team _ Mabel Mao
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Anonymous
Not applicable

It wasn't filtering on any view originally, as I previously mentioned. Because of you bringing it up, it now filters on the main view which is called "All Staff". The column names are First Name, Last Name, Job Title, User Account, Permission Groups, E-Mail.

 

Here are my not-exactly-scientific findings after probably a couple hundred tests:

  • Usually if it doesn’t start, but then another item does successfully start within the next day or so, it will pick up the first one and run it then (along with the new one).
  • It seems that the less recently an item was modified before the current modification, the more likely it was to run the Flow.
  • Creating a new item seems to always run the Flow. It’s just editing an existing one that has problems.
  • Putting all that together, the best strategy to run the Flow on an item I just edited seemed to be to create a different new item (then delete it to clean it up afterward).

 

I wonder if this is one of those "it's a feature, not a bug" scenarios. There's a potential justification that MS doesn't want a Flow to run multiple times on the same item within a short time span. 99% of scenarios, that's probably fine and makes some efficient sense. Might even help with Flows that accidentally have an endless loop of updating itself which starts the Flow again.

Anonymous
Not applicable

I have the same issue, i have a "When a file is created or modified (properties only)" trigger on my sharepoint folder. 

 

I then have macros in Excel that processes data and saves to onedrive

 

One drive then syncs these files to Sharepoint - which is in turn meant to trigger the email notification to a distibution list and attach the file. 

 

I found that, if i have the file open after i create in onedrive the Trigger does not fire in Flow

But if i dont open the file when created, i have no issues with the Trigger not firing. 

 

Situations like removing the option to open file after saving when doing PDF exports helped alot for me. 

I'd say I'm currently experiencing the same problem.

I'm on the Free Flow Plan and it seems the trigger 'When an item is created or modified' is also limited to 5min as I would only expect the 'Recurrence' trigger to be. So although a list item may be created or modified it won't be picked up i.e. the flow be triggered unless 5min have passed. Can anyone confirm this? I don't remember it working like that a couple of weeks ago.

I am experiencing this same issue and agree completely with ryanr-pw's "not-exactly-scientific" findings.

BugsB
New Member

We are experiencing issues with the flow not starting as it should from an upload or edit. No reason we can see. We are a highly experienced flow team. 

Anonymous
Not applicable

I have faced very similar issue when I expect that it should run but it didn't.

Then I have a look at the flow free plan and pricing. It clearly said that it takes 15 minutes

https://australia.flow.microsoft.com/en-us/pricing/

I went for lunch and come back and yes after 20 minutes it automatically runs (for those items that I changed before lunch).

Therefore this is by design. Your workflow is OK and item change triger will activate. The only thing is since it is a free plan, it takes 15+ minutes. Even for plan 1 it takes 3 minutes.

Hope this help somneone else

 

shaunboot
Frequent Visitor

Hi,

wondering if you have made any progress on this.

I'm having the same issue with the "When a file is created or modified (properties only)" trigger.

I have a flow that sends a notification when a column in a Document Library is updated.

Infuriatingly it works when I run a Test and then change an item. It also seems to work when I Edit the flow (make no changes) and then hit Save. It then runs the backlog of previous triggers. 

Anonymous
Not applicable

Im not too sure what has fixed the issue, but it seems to of by itself. Which probally is not of much help to you, we are also on the premium plan.

johndavies
Frequent Visitor

I too have this issue, exactly the same : 

 

The only way it gets triggeres is if 

a) a differetn item in the list is changed (not that item)

b) the worklow is "saved" 

 

Can we get a timeline on a fix for this ? 

Thanks 

We are also seeing this exact issue. We also require immediate triggering for permissions. Is there a fix in the pipeline?

Anonymous
Not applicable

Found this thread browsing for issues on When An Item Is Created or Modified trigger and saw it was still active. I am having similiar issues as well with this trigger being unreliable. I have it set to trigger for a specific SharePoint list that sometimes works just fine but it just stops completely for when an item is created and when one is modified even if it is a new item or modifying an item that previously worked with the trigger in the past. 

Ditto here. This is for incident tracking for us so it's kind of important key member of the organization get notified for updates. For now, I'll try programming a seperate flow that runs manually, but that's very clunky.

 

https://us.flow.microsoft.com/manage/environments/Default-f1e31150-57dd-4b78-9208-3c24b9366a23/flows...

 

 

MP001
Advocate III
Advocate III

Here the same issues,  not based on SP Item Modified but used when: "When an item is created".
it never triggered on some new created items... 

 

Same issue -SP trigger only works in test. I guess I have to upgrade and pay $$ so I can wait 3 minutes for my flow action to run. I guess I’ll upgrade and script up some redirect screens for users with a countdown timer; please wait 3 minutes for your changes to take effect...

Same issue -SP trigger only works in test. I guess I have to upgrade and pay $$ so I can wait 3 minutes for my flow action to run. So... upgrade and script up some redirect screens for users with a countdown timer; please wait 3 minutes for your changes to take effect...

Helpful resources

Announcements

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Getting Started with Private Messages & Macros

Welcome to TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   This Week's Tip: Private Messaging & Macros in Power Apps Community   Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member!   Our Knowledge Base article about private messaging and macros is the best place to find out more. Check it out today and discover some key tips and tricks when it comes to messages and macros:   Private Messaging: Learn how to enable private messages in your community profile and ensure you’re connected with other community membersMacros Explained: Discover the convenience of macros—prewritten text snippets that save time when posting in forums or sending private messagesCreating Macros: Follow simple steps to create your own macros for efficient communication within the Power Apps CommunityUsage Guide: Understand how to apply macros in posts and private messages, enhancing your interaction with the Community For detailed instructions and more information, visit the full page in your community today:Power Apps: Enabling Private Messaging & How to Use Macros (Power Apps)Power Automate: Enabling Private Messaging & How to Use Macros (Power Automate)  Copilot Studio: Enabling Private Messaging &How to Use Macros (Copilot Studio) Power Pages: Enabling Private Messaging & How to Use Macros (Power Pages)

Tuesday Tip: Subscriptions & Notifications

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week: All About Subscriptions & Notifications We don't want you to a miss a thing in the Community! The best way to make sure you know what's going on in the News & Announcements, to blogs you follow, or forums and galleries you're interested in is to subscribe! These subscriptions ensure you receive automated messages about the most recent posts and replies. Even better, there are multiple ways you can subscribe to content and boards in the community! (Please note: if you have created an AAD (Azure Active Directory) account you won't be able to receive e-mail notifications.)   Subscribing to a Category  When you're looking at the entire category, select from the Options drop down and choose Subscribe.     You can then choose to Subscribe to all of the boards or select only the boards you want to receive notifications. When you're satisfied with your choices, click Save.     Subscribing to a Topic You can also subscribe to a single topic by clicking Subscribe from the Options drop down menu, while you are viewing the topic or in the General board overview, respectively.     Subscribing to a Label Find the labels at the bottom left of a post.From a particular post with a label, click on the label to filter by that label. This opens a window containing a list of posts with the label you have selected. Click Subscribe.     Note: You can only subscribe to a label at the board level. If you subscribe to a label named 'Copilot' at board #1, it will not automatically subscribe you to an identically named label at board #2. You will have to subscribe twice, once at each board.   Bookmarks Just like you can subscribe to topics and categories, you can also bookmark topics and boards from the same menus! Simply go to the Topic Options drop down menu to bookmark a topic or the Options drop down to bookmark a board. The difference between subscribing and bookmarking is that subscriptions provide you with notifications, whereas bookmarks provide you a static way of easily accessing your favorite boards from the My subscriptions area.   Managing & Viewing Your Subscriptions & Bookmarks To manage your subscriptions, click on your avatar and select My subscriptions from the drop-down menu.     From the Subscriptions & Notifications tab, you can manage your subscriptions, including your e-mail subscription options, your bookmarks, your notification settings, and your email notification format.     You can see a list of all your subscriptions and bookmarks and choose which ones to delete, either individually or in bulk, by checking multiple boxes.     A Note on Following Friends on Mobile Adding someone as a friend or selecting Follow in the mobile view does not allow you to subscribe to their activity feed. You will merely be able to see your friends’ biography, other personal information, or online status, and send messages more quickly by choosing who to send the message to from a list, as opposed to having to search by username.

Users online (4,145)