cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
NickDewitt
Advocate II
Advocate II

Flows not triggering

I have a flow that is triggered when a Dynamics record is created or updated, but it either takes absolutely ages to trigger (20+ mins), when it says it should take 1 minute, or it doesn't trigger until I go to the flow and turn it off and back on again.

 

I had the same for another flow that was supposed to be triggered at 5pm last night, when I checked it at 18:30, it hadn't run, turned it off and back on and it ran straight away (even though it was way past 5pm) so what is happening here, why are my flows not starting, and why does the trigger seem to be cached somewhere until I turn the flow off and back on?

 

This unreliability makes it very difficult to demonstrate it's potential to any senior members of staff.

1 ACCEPTED SOLUTION

Accepted Solutions

Ok so it turns out if you leave the 'Minutes' box blank, it doesn't run on the hour. Now that I have set the minutes box to 0, it runs at 17:00.

View solution in original post

14 REPLIES 14
v-yuazh-msft
Community Support
Community Support

Hi @ NickDewitt,

 

Have your problem still exists?

Could you please share a screenshot of your flows which couldn't  be triggered normally?

 

 

My flow always be triggered normal and don't have the issue that you mentioned.

 

For your first flow, would the flow takes absolutely 20+ minutes to trigger,or would trigger until you go to the flow and turn it off and back on again?

 

What browser are you use when the flow don't normally trigger?

Could you please check if you have a normal network status?

 

Pleaseshare more details so we could provide a proper workaround for you.

 

Please let me know if your problem could be solved.

 

Regards,
Alice Zhang

Hi @v-yuazh-msft,

 

Thanks for your response, it seems to be better this morning.

 

I did notice that I didn't set the time-zone for the scheduled Flow, it was scheduled to run at 17:00 and has run at 18:37 every day - incidentally the same time I had turned it off and on again last week.

 

The dynamics created or updated trigger was definitely running extremely slowly last week and taking up to and even over an hour to trigger, and some of the updates did not seem to be triggering at all.

 

I have a Powerapps P2 license with my Dynamics 365 package, but I did notice I had a total of 13 different Flow and PowerApps licenses assigned to me from various Office 365 and Dynamics 365 packages, including a PowerApps and Flow P2 trial. I disabled that license last week, so i'm wondering whether I was getting throttled as the trial license was taking precedence for some reason?

 

Also, the dynamics instance that I am testing on is the free sandbox version, not sure if that should make a difference.

 

Is there any way to find out the reason for flows taking a long time to start?

 

I am using the latest version of Chrome as as browser, our network activity is normal, and the trigger is running on a Dynamics 365 instance so it's all running in the MS cloud, my network activity shouldn't matter for the trigger, I am crossing the on-premise gateway inside the flow, but as soon as it triggers the response from my Web API is immediate.

 

Flow Slow Start.png

Hello, @NickDewitt!

 

Have you had a chance to apply @v-yuazh-msft‘s recommendation to adapt your Flow? If yes, and you find that solution to be satisfactory, please go ahead and click “Accept as Solution” so that this thread will be marked for other users to easily identify!

 

 

Thank you for being an active member of the Flow Community!

 

-Gabriel

Flow Community Manager

 

- Gabriel
Community Manager
Power Automate | Power Virtual Agents
Super User Program Manager



Hi @GabrielStJohn I didn't see any recommendation to adapt my Flow in that response, just a request for more info which I provided.

 

My Flows from dynamics seem to be more responsive at the moment, but I need to find some time to do more testing to ensure that it is triggering in a timely manner.

 

My scheduled Flow is still running 36 minutes later than scheduled every day though, even though I have set the correct time zone.

Hi @NickDewitt,

 

Do you set the flow run at 17:00 in your flow?

The trigger "Recurrence" trigger would run the flow with the time that you scheduled with UTC time.

 

However, the scheduled time in the "Recurrence" trigger could only support the UTC time and schedule a flow with a local time is not supported in microsoft flow currently.

 

All times in Microsoft Flow are in Universal Time by default

 

You could refer to link below to know the UTC time now:

https://www.timeanddate.com/worldclock/timezone/utc

 

 

Best regards,

Alice

 

Hi @v-yuazh-msft,

 

Yes, it's set for 17:00, and the Time Zone is set to UTC+00:00 - It definitely seems to be supported to select a Time Zone in the Recurrence trigger according to the UI that comes with it, and it did start running an hour earlier when I selected the correct time zone.

 

Recurrence.png

Granted as we are on British Summer Time right now, we are an hour ahead, but then I would expect it to run an hour earlier, not 35 minutes late.

 

image.png

 

Thank you for the help, it's much appreciated.

Ok so it turns out if you leave the 'Minutes' box blank, it doesn't run on the hour. Now that I have set the minutes box to 0, it runs at 17:00.

Anonymous
Not applicable

Wow this is a good point to remember, thanks for sharing your findings.
sandeepnmenon
Employee
Employee

What is the solution to the flow not getting triggered (not the recurring flow)?

I am facing similar issue.

 

When I am in the test mode of the flow, it triggers immediately, but outside test mode, it is not getting triggered unless I do a blank edit and save of the flow.

 

Please help as this is blocking our design.

Beejey007
New Member

Hi I have created 3 flows and none of them has ever worked, 

 

very discouraging

Anonymous
Not applicable

Same frustrations this side Client had on premise with SP designer reusable workflow,(seeing that they have 30 libraries for approval). working fine, Migrated to Cloud a year ago still working fine until lately, response is slow and according to MS posting they recommend going over to flow. I have tried it a few months ago and after numerous frustrations left it. Decided today to approach it with an open positive mind / attitude. That did not last long, back to the same issues as before: Slow Not responding Modern view not enforcing metadata, which I need to approvals Do not detect the site / libraries although I am logged in Have to manually change all connections, not detecting the connections which I am logged in with Have to add a step and settings for ETAG Do not accommodate for reusable approval workflows This is more a massive downgrade than an improvement. So far no benefits for any of my clients.

Hi

I tried for an entire and I got it working.

Maybe if you can give me details, I can help.

Thanks

V

I am having a similar problem.

I wrote a flow which is triggered by a recurrent schedule and refers to dates on an excel file domiciled on Sharepoint for it to run. 

I have tested it and its fine whenever tested. However, it always sends a reminder a day late after the scheduled dates, and sometime when i go back to edit or tweak the excel document, it fails to pick the dates and sometime it wont even trigger at all. Keeping in mind that I have implemented all that was said earlier in this thread.

 

I was almost inviting the execs after the test was successful only for it to send the reminder late.

 

Can someone please help

 

 

Can you give example of what you are trying to do ?  I am able to work well with flows and they all work.

Maybe I can help.

Helpful resources

Announcements

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Getting Started with Private Messages & Macros

Welcome to TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   This Week's Tip: Private Messaging & Macros in Power Apps Community   Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member!   Our Knowledge Base article about private messaging and macros is the best place to find out more. Check it out today and discover some key tips and tricks when it comes to messages and macros:   Private Messaging: Learn how to enable private messages in your community profile and ensure you’re connected with other community membersMacros Explained: Discover the convenience of macros—prewritten text snippets that save time when posting in forums or sending private messagesCreating Macros: Follow simple steps to create your own macros for efficient communication within the Power Apps CommunityUsage Guide: Understand how to apply macros in posts and private messages, enhancing your interaction with the Community For detailed instructions and more information, visit the full page in your community today:Power Apps: Enabling Private Messaging & How to Use Macros (Power Apps)Power Automate: Enabling Private Messaging & How to Use Macros (Power Automate)  Copilot Studio: Enabling Private Messaging &How to Use Macros (Copilot Studio) Power Pages: Enabling Private Messaging & How to Use Macros (Power Pages)

Tuesday Tip: Subscriptions & Notifications

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week: All About Subscriptions & Notifications We don't want you to a miss a thing in the Community! The best way to make sure you know what's going on in the News & Announcements, to blogs you follow, or forums and galleries you're interested in is to subscribe! These subscriptions ensure you receive automated messages about the most recent posts and replies. Even better, there are multiple ways you can subscribe to content and boards in the community! (Please note: if you have created an AAD (Azure Active Directory) account you won't be able to receive e-mail notifications.)   Subscribing to a Category  When you're looking at the entire category, select from the Options drop down and choose Subscribe.     You can then choose to Subscribe to all of the boards or select only the boards you want to receive notifications. When you're satisfied with your choices, click Save.     Subscribing to a Topic You can also subscribe to a single topic by clicking Subscribe from the Options drop down menu, while you are viewing the topic or in the General board overview, respectively.     Subscribing to a Label Find the labels at the bottom left of a post.From a particular post with a label, click on the label to filter by that label. This opens a window containing a list of posts with the label you have selected. Click Subscribe.     Note: You can only subscribe to a label at the board level. If you subscribe to a label named 'Copilot' at board #1, it will not automatically subscribe you to an identically named label at board #2. You will have to subscribe twice, once at each board.   Bookmarks Just like you can subscribe to topics and categories, you can also bookmark topics and boards from the same menus! Simply go to the Topic Options drop down menu to bookmark a topic or the Options drop down to bookmark a board. The difference between subscribing and bookmarking is that subscriptions provide you with notifications, whereas bookmarks provide you a static way of easily accessing your favorite boards from the My subscriptions area.   Managing & Viewing Your Subscriptions & Bookmarks To manage your subscriptions, click on your avatar and select My subscriptions from the drop-down menu.     From the Subscriptions & Notifications tab, you can manage your subscriptions, including your e-mail subscription options, your bookmarks, your notification settings, and your email notification format.     You can see a list of all your subscriptions and bookmarks and choose which ones to delete, either individually or in bulk, by checking multiple boxes.     A Note on Following Friends on Mobile Adding someone as a friend or selecting Follow in the mobile view does not allow you to subscribe to their activity feed. You will merely be able to see your friends’ biography, other personal information, or online status, and send messages more quickly by choosing who to send the message to from a list, as opposed to having to search by username.

Users online (4,204)