cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Get a row using date column in Excel

Hello,

 

I am simply trying to use the Get a Row function to get information from a table using a date. Even though it shows that the right date is being used in the Get a Row function, it throws an error stating that that the row cannot be found.

 

What am I not doing right?

1 ACCEPTED SOLUTION

Accepted Solutions

Hi again

I created a test Excel with a DATE format column and four rows:

TestingDate
13/02/2020
13/02/2019
05/12/2019
05/12/2020

 

I have created a test PA Flow to read it, and verified all these example dates are shown in Flow as integers that are internally converted into strings:

[
"43874",
"43509",
"43804",
"44170"
]

In order to get row whose Key is 13/02/2020 I first 'create' this date in flow format ('Compose' action block), then I convert it into Excel Date format ('Excel Get a row' action block) by applying the suggested workaround. Remember it is only valid for 2020 dates, since 43820 equals to 31st Dec 2019.

 

Flow_ExcelDates.png

 

 

string(add(43830,dayOfYear(outputs('Compose_2020Feb12'))))

 

 

My PA Flow execution succeeds, and I get the expected row as output.

 

If you need this workaround to work no matter the year, you will probably need to calculate the nr of days between the desired date and the one Excel uses as start point to generate the integer values. According to this post, the date calendar in Excel starts on January 1st, 1900. Please also note, that, according to this web site:

 


Days Since 1900-01-01 (+2) is used in the Microsoft Excel date functions such as DAY(serial_number) and WEEKDAY().

Note, Excel's serial number is 2 higher than the number on this page.

  • In Excel January 1 is serial number 1. In this converter midnight January 1, 1900 is 0, after 1 day it is midnight on January 2. To correct this you have to add/subtract 1.
  • Excel incorrectly sees 1900 as a leap year (for compatibility with Lotus 1-2-3) so you have to add/subtract 1 to all days when using in Excel. Also see: Excel incorrectly assumes that the year 1900 is a leap year

Finally, this thread explains how to calculate in Flow the nr of days between two dates, they use the following example:

 

div(sub(ticks('2019-05-13'),ticks('2019-05-04')),864000000000)

Hope this helps

 

 

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

View solution in original post

9 REPLIES 9
efialttes
Community Champion
Community Champion

Hi
Can you share a screenshot of your flow definition, columns of your excel and details of action block Get a Row inputs?
Thanx!

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Jcook
Most Valuable Professional
Most Valuable Professional

Hello,

Try doing a list rows without a filter to see what comes back.

If excel is using a date column than this could be the issue as excel passes dates as serial dates.

To convert a serial date use the addDays expression. Here is an example:

I put the serial date in a compose action in flow, with the name Compose Due Date
Than I use another compose action to convert the date. In my case this is what my expression looks like:
addDays('1899-12-30',int(outputs('Compose_Due_Date')),'MM/dd/yyyy')

Hope this helps!
--Josh

If you like my post please hit the "Thumbs Up" -- If my post solved your issue please "Mark as a Solution" to help others

Did I answer your question? Mark my post as a solution!

If you like my post please hit the Thumbs Up


Proud to be a Flownaut!


Check out my blog for Power Automate tips,
tricks, and guides
FlowAltDelete





Anonymous
Not applicable

@Jcook  Is there a way to do it backwards so say someone selects a date when triggering the button flow, that i can convert the date they selected into the excel serial date so i can use that as the key value for a column?

Anonymous
Not applicable

Spreadsheet.JPGOpen Flow.JPGError.JPG

 

@efialttes This is what is currently happening and what i am trying to do.

Jcook
Most Valuable Professional
Most Valuable Professional

Hello,

I have not found a easy way to convert the string date into serial for excel.

May I suggest you use the list records action and use a filter on the user selected date.

I believe the issue is excel is expecting a unique id for the key. And I don’t think excel likes date for the key..

Try list records and use the filter as user selected date.

--Josh

If you like my post please hit the "Thumbs Up" -- If my post solved your issue please "Mark as a Solution" to help others

Did I answer your question? Mark my post as a solution!

If you like my post please hit the Thumbs Up


Proud to be a Flownaut!


Check out my blog for Power Automate tips,
tricks, and guides
FlowAltDelete





efialttes
Community Champion
Community Champion

Hi
Is your key colummn formatted as DATE in excel? If so, this thread can be useful
https://powerusers.microsoft.com/t5/General-Power-Automate/Update-Excel-Row-by-DATE-key-column/td-p/...
Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Anonymous
Not applicable

@efialttes  I was hoping to use the date column in Excel, I suppose I could try retyping all the dates as text. Would that make a difference?

 

In that thread you showed me their solution was to use this
add(43830, dayOfYear(date_to_look_for)))

However I think i must be misusing it because I cannot get it to accept the expression I am trying to do?

Anonymous
Not applicable

@Jcook  I tried to list all rows and then attempted to filter by date but the filter array shows the same serial dates

Hi again

I created a test Excel with a DATE format column and four rows:

TestingDate
13/02/2020
13/02/2019
05/12/2019
05/12/2020

 

I have created a test PA Flow to read it, and verified all these example dates are shown in Flow as integers that are internally converted into strings:

[
"43874",
"43509",
"43804",
"44170"
]

In order to get row whose Key is 13/02/2020 I first 'create' this date in flow format ('Compose' action block), then I convert it into Excel Date format ('Excel Get a row' action block) by applying the suggested workaround. Remember it is only valid for 2020 dates, since 43820 equals to 31st Dec 2019.

 

Flow_ExcelDates.png

 

 

string(add(43830,dayOfYear(outputs('Compose_2020Feb12'))))

 

 

My PA Flow execution succeeds, and I get the expected row as output.

 

If you need this workaround to work no matter the year, you will probably need to calculate the nr of days between the desired date and the one Excel uses as start point to generate the integer values. According to this post, the date calendar in Excel starts on January 1st, 1900. Please also note, that, according to this web site:

 


Days Since 1900-01-01 (+2) is used in the Microsoft Excel date functions such as DAY(serial_number) and WEEKDAY().

Note, Excel's serial number is 2 higher than the number on this page.

  • In Excel January 1 is serial number 1. In this converter midnight January 1, 1900 is 0, after 1 day it is midnight on January 2. To correct this you have to add/subtract 1.
  • Excel incorrectly sees 1900 as a leap year (for compatibility with Lotus 1-2-3) so you have to add/subtract 1 to all days when using in Excel. Also see: Excel incorrectly assumes that the year 1900 is a leap year

Finally, this thread explains how to calculate in Flow the nr of days between two dates, they use the following example:

 

div(sub(ticks('2019-05-13'),ticks('2019-05-04')),864000000000)

Hope this helps

 

 

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Helpful resources

Announcements

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Getting Started with Private Messages & Macros

Welcome to TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   This Week's Tip: Private Messaging & Macros in Power Apps Community   Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member!   Our Knowledge Base article about private messaging and macros is the best place to find out more. Check it out today and discover some key tips and tricks when it comes to messages and macros:   Private Messaging: Learn how to enable private messages in your community profile and ensure you’re connected with other community membersMacros Explained: Discover the convenience of macros—prewritten text snippets that save time when posting in forums or sending private messagesCreating Macros: Follow simple steps to create your own macros for efficient communication within the Power Apps CommunityUsage Guide: Understand how to apply macros in posts and private messages, enhancing your interaction with the Community For detailed instructions and more information, visit the full page in your community today:Power Apps: Enabling Private Messaging & How to Use Macros (Power Apps)Power Automate: Enabling Private Messaging & How to Use Macros (Power Automate)  Copilot Studio: Enabling Private Messaging &How to Use Macros (Copilot Studio) Power Pages: Enabling Private Messaging & How to Use Macros (Power Pages)

Tuesday Tip: Subscriptions & Notifications

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week: All About Subscriptions & Notifications We don't want you to a miss a thing in the Community! The best way to make sure you know what's going on in the News & Announcements, to blogs you follow, or forums and galleries you're interested in is to subscribe! These subscriptions ensure you receive automated messages about the most recent posts and replies. Even better, there are multiple ways you can subscribe to content and boards in the community! (Please note: if you have created an AAD (Azure Active Directory) account you won't be able to receive e-mail notifications.)   Subscribing to a Category  When you're looking at the entire category, select from the Options drop down and choose Subscribe.     You can then choose to Subscribe to all of the boards or select only the boards you want to receive notifications. When you're satisfied with your choices, click Save.     Subscribing to a Topic You can also subscribe to a single topic by clicking Subscribe from the Options drop down menu, while you are viewing the topic or in the General board overview, respectively.     Subscribing to a Label Find the labels at the bottom left of a post.From a particular post with a label, click on the label to filter by that label. This opens a window containing a list of posts with the label you have selected. Click Subscribe.     Note: You can only subscribe to a label at the board level. If you subscribe to a label named 'Copilot' at board #1, it will not automatically subscribe you to an identically named label at board #2. You will have to subscribe twice, once at each board.   Bookmarks Just like you can subscribe to topics and categories, you can also bookmark topics and boards from the same menus! Simply go to the Topic Options drop down menu to bookmark a topic or the Options drop down to bookmark a board. The difference between subscribing and bookmarking is that subscriptions provide you with notifications, whereas bookmarks provide you a static way of easily accessing your favorite boards from the My subscriptions area.   Managing & Viewing Your Subscriptions & Bookmarks To manage your subscriptions, click on your avatar and select My subscriptions from the drop-down menu.     From the Subscriptions & Notifications tab, you can manage your subscriptions, including your e-mail subscription options, your bookmarks, your notification settings, and your email notification format.     You can see a list of all your subscriptions and bookmarks and choose which ones to delete, either individually or in bulk, by checking multiple boxes.     A Note on Following Friends on Mobile Adding someone as a friend or selecting Follow in the mobile view does not allow you to subscribe to their activity feed. You will merely be able to see your friends’ biography, other personal information, or online status, and send messages more quickly by choosing who to send the message to from a list, as opposed to having to search by username.

Users online (5,873)