cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
JonathanM
Advocate I
Advocate I

HTTP Post multipart/form-data

Hi,

 

I am trying to post SharePoint files to a 3rd party via their API.  Their API uses multipart/form-data.  After some trial and error, I can POSTcontent, but only text files come out correctly on the destination.  Other files (Excel, Word, jpg, etc.) post, but the data is not readable. What do I need to do to the file content to format it properly?

 

Thanks!

 

http post.png

 

51 REPLIES 51
v-yuazh-msft
Community Support
Community Support

Hi @JonathanM,

 

The file content is with type base 64 when the files with type Excel, Word, jpg, etc.

 

Best regards,

Alice

Thanks Alice.  I've tried converting the content a variety of ways, but have not been able to get it converted properly.  What should the formula be to convert the file content?

 

Thanks,

 

Jonathan

Anonymous
Not applicable

@JonathanM Did you ever resolve this issue?

How were you able to post text files using this method in the first place? Everthing I try just converts the whole string to base64 and flow completely ignores the multipart sections.

I'm trying to do it now through swagger but still no luck yet.

Any updates you have here would be much appreciated.

 

Thanks,

Sam

Hi @Anonymous 

 

This worked for me for any type of content (text, Word, Excel, etc.)

2019-04-02_08h15_42.png

Anonymous
Not applicable

@JonathanM Thanks for this.

Unfortunately it's not working for me. I'm posting to the API for Atlassian Jira Cloud.

It responds with a code of 200 but no file is actually created.

 

2019-04-02_1817.png

Anonymous
Not applicable

I got it working in the end. I had to specifically define the content type in the body

Screenshot 2019-04-02 at 22.10.53.png

@JonathanMor @Anonymous  Do you know how to modify the request body to include other parameters in the multi-part form? Your examples appear just to have a single part, which is the file itself.

Anonymous
Not applicable

@WillPage  What else are you trying to update?

 

Also are you able to make the call you wish from Postman? I used postman calls to a test flow I built to figure out the structure I needed. Perhaps you can do the same. If you have an example of the postman call then screenshot it here as well if you can.

@Anonymous  Thanks for responding.

 

It's a file upload to Bamboo HR. They need a bit of metadata with the file; a category, which is basically the folder it goes in and whether it's shared or not. Here's their doco https://www.bamboohr.com/api/documentation/employees.php#uploadEmployeeFile

 

It works fine in Postman, and it works fine posting plain text in the file content using the example copy-pasted in the documentation (with the category changed).

 

I've tried using your example and adding the metatdata as extra records in the $multipart object like this

 

{
  "$content-type": "multipart/form-data",
  "$multipart": [
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"category\""
      },
      "body": {
        "$content": "18"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"fileName\""
      },
      "body": {
        "$content": "test.bmp"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"share\""
      },
      "body": {
        "$content": "yes"
      }
    },
    {
      "headers:": {
        "Content-Disposition": "form-data; name = \"file\"; filename=\"test.bmp\""
      },
      "body": {
        "$content-type": "application/octet-stream",
        "$content": {
          "$content-type": "image/bmp",
          "$content": "iVBORw0KGgoAAA............Jggg=="
        }
      }
    }
  ]
}

However, I get 403 Forbidden back from the server. File category 18 is the only one I have write access to, so there's every chance the metadata isn't being sent properly and it's denying me to write whatever the default file category is.

 

Here's the screen shot from Postman:Capture.PNG

 

What I pasted as the request body there was copied from the output of a failed run. I spotted that Flow is adding its own record for the body... However, it still fails with a 403:

 

Request body as seen in the designer:

{
  "$content-type": "multipart/form-data",
  "$multipart": [
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"category\""
      },
      "body": {
        "$content": "18"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"fileName\""
      },
      "body": {
        "$content": "test.bmp"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"share\""
      },
      "body": {
        "$content": "yes"
      }
    },
    {
      "headers:": {
        "Content-Disposition": "form-data; name = \"file\"; filename=\"test.bmp\""
      },
      "body":  @{body('Get_file_content_using_path')}
      
    }
  ]
}

And as seen in the output of a failed run:

 

{
  "$content-type": "multipart/form-data",
  "$multipart": [
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"category\""
      },
      "body": {
        "$content": "18"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"fileName\""
      },
      "body": {
        "$content": "test.bmp"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"share\""
      },
      "body": {
        "$content": "yes"
      }
    },
    {
      "headers:": {
        "Content-Disposition": "form-data; name = \"file\"; filename=\"test.bmp\""
      },
      "body": {
        "$content-type": "image/bmp",
        "$content": "iVBORw.................Jggg=="
      }
    }
  ]
}
Anonymous
Not applicable

@WillPage  Sorry for the late reply.

 

1) Does your postman flow work?

2) Assuming it does work, change the endpoint of the postman flow to a new flow just with an HTTP request trigger (add just a compose or something so you can save it. Then run it once and open the log of the flow that ran then copy the body received by the HTTP trigger here. If one of the items youve posted above is already this then let me know which one.

 

Sam

@AnonymousNow that I've done that it's clear why it isn't working.

 

This is the body of the request coming from Postman, as captured by a flow with HTTP trigger:

 

----------------------------633613363255592221149085
Content-Disposition: form-data; name="category"

18
----------------------------633613363255592221149085
Content-Disposition: form-data; name="fileName"

Will Page - Signed Induction.pdf
----------------------------633613363255592221149085
Content-Disposition: form-data; name="share"

yes
----------------------------633613363255592221149085
Content-Disposition: form-data; name="file"; filename="Will Page - Signed Induction.pdf"
Content-Type: application/pdf

%PDF-1.7
... Rest of PDF file.

 

 

..and this is from Flow:

 

--cbd9b14e-6955-43e3-a757-c4e5d1d3d3c3
Content-Type: application/json; charset=utf-8
Content-Disposition: form-data; name="category"

{"$content":"18"}
--cbd9b14e-6955-43e3-a757-c4e5d1d3d3c3
Content-Type: application/json; charset=utf-8
Content-Disposition: form-data; name="fileName"

{"$content":"Will Page - Signed Induction.pdf"}
--cbd9b14e-6955-43e3-a757-c4e5d1d3d3c3
Content-Type: application/json; charset=utf-8
Content-Disposition: form-data; name="share"

{"$content":"yes"}
--cbd9b14e-6955-43e3-a757-c4e5d1d3d3c3
content-type: application/pdf

%PDF-1.7
... Rest of PDF file

 

 

I do note that the file content is not corrupt. It looks the same as the original in a text editor at least, which is more than can be said when adding dynamic content from a Get file content action directly into a plain text request body, (like the output from Postman above or the example on the Bamboo HR documentation).

 

Now, if I can define the multipart boundaries using JSON, and the file content but have the metadata as plain text this would work. Is that possible, or am I going to have to do this in an Azure Function?

So, this body:

 

{
  "$content-type": "multipart/form-data",
  "$multipart": [
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"category\""
      },
      "body": "18"
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"fileName\""
      },
      "body": "Will Page - Signed Induction.pdf"
  
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"share\""
      },
      "body": "yes"
    },
    {
      "headers:": {
        "Content-Disposition": "form-data; name=\"file\"; filename=\"Will Page - Signed Induction.pdf\""
      },
      "body": @{body('Get_file_content')}
    }
  ]
}

Gives me this output:

--3b77c044-c94c-4156-8322-01ca7e812bcb
Content-Type: text/plain; charset=utf-8
Content-Disposition: form-data; name="category"

18
--3b77c044-c94c-4156-8322-01ca7e812bcb
Content-Type: text/plain; charset=utf-8
Content-Disposition: form-data; name="fileName"

Will Page - Signed Induction.pdf
--3b77c044-c94c-4156-8322-01ca7e812bcb
Content-Type: text/plain; charset=utf-8
Content-Disposition: form-data; name="share"

yes
--3b77c044-c94c-4156-8322-01ca7e812bcb
content-type: application/pdf

%PDF-1.7

...which looks OK apart from the Content-Type header I didn't ask for in each section. Unfortunately though, The Bamboo HR API gives me a 400 error when I send it this. Guess I'm stuck!

This is the error coming back from the Bamboo HR API now....

Capture.PNG

It's just clicked. For some reason the last part:

 

 {
      "headers:": {
        "Content-Disposition": "form-data; name=\"file\"; filename=\"Will Page - Signed Induction.pdf\"",
"Content-Type": "application/pdf"
      },
      "body": @{body('Get_file_content')}
    }

When run through the Flow comes out without the Content-Disposition attached:

--4a6c27da-af8b-479d-af08-824f21977c40
content-type: application/pdf

%PDF-1.7
..Rest of PDF

--4a6c27da-af8b-479d-af08-824f21977c40

..so close but not quite there!

@AnonymousThanks so much for your help. I finally figured this out:

 

{
  "$content-type": "multipart/form-data",
  "$multipart": [
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"category\""
      },
      "body": "18"
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"fileName\""
      },
      "body": "Will Page - Signed Induction.pdf"
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"share\""
      },
      "body": "yes"
    },
    {
      "headers": {
"Content-Disposition": "form-data; name=\"file\"; filename=\"Will Page - Signed Induction.pdf\""},
      "body": {
"$content-type": "application/pdf",
"$content": "@{base64(body('Get_file_content'))}"
}
    }
  ]
}

Without your tip of creating a Flow to capture and debug the output I'd have spent a million years on this - having that info was crucial.

 

The last part was simply to convert the output of Get file content to Base64 rather than feed the raw content straight into the Flow and let it infer the content type and create an object out of it.

 

So happy to see this working!

Anonymous
Not applicable

@WillPage So happy to see you've got it working! 

Glad to be of service.

davidlist87
Advocate I
Advocate I

Hi Guys,

 

I was wondering if you could help with my problem.

 

I am try to POST an image to a machine learning service but I'm getting a weird error back.

JPG is one of the only content types allowable. I have tested this using Postman multipart/form-data but I am struggling to POST is using raw JSON.

Image 1.jpgImage 3.jpg

 

You need to show us the body of your HTTP request and the error message, to be in with any chance of getting help.

Helpful resources

Announcements

Summer of Solutions | Week 3 Results | Win free tickets to the Power Platform Conference

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22  

Copilot Cookbook Challenge | WINNERS ANNOUNCED | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge random winners have been selected for the Challenge.  Thank you to everyone who participated in this challenge.    Copilot Cookbook Gallery:Power Apps Cookbook Gallery: 1. @swaminawale  1. @renatoromao     2.  @SpongYe  2.   @nickpotts10  *Please note if for any reason a winner declines, we will have another random drawing.   Check out all of the Cookbook Submissions: 1. Copilot Studio Cookbook Gallery: https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30WINNERS ANNOUNCED - JULY 8th     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge. Early Bird Submissions: @renato Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  n/a2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a   Week 2 Results:  Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Kasun_Pathirana1. ManishSolanki2. cloudatica2. madlad3. n/a3. SpongYe4. n/a4. n/a5. n/a5. n/a     Week 3 Results:  Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Parul_Yadav_Neo1. n/a2. SpongYe2. n/a3. n/a3. n/a4. n/a4. n/a5. n/a5. n/a   Week 4 Results:  Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. @nickpotts10  1. @ShrushtiShah  2. @Suniti_0020 2. @swaminawale 3. n/a3. @farukhis786 4. n/a4. @ManishSolanki  5. n/a5.  n/a

Important Update for Community Platform Access | READ ONLY July 16-22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Tuesday Tip | How to Become a Community Blog Author

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   This Week's Topic: How to Become a Community Blog Author We want YOU to be part of the community blog! Sharing your knowledge of Power Platform is an essential part of our community! Here's why:   It helps create a vibrant and dynamic community of makers who can learn from each other’s experiences and insights.It provides a platform for collaboration and innovation, where members can share their ideas and work together to develop new solutions.It helps promote Power Platform by showcasing its capabilities and real-world applications.It helps build trust and credibility in the community because you are providing valuable information and resources your fellow community members can use to improve their skills and knowledge. By sharing your knowledge of Power Platform in the community blog, you help us create a more engaged and informed community, better equipped to tackle complex challenges. To get started with blogging across the Power Platform communities, please visit the following links:   Power Apps: https://powerusers.microsoft.com/t5/Power-Apps-Community-Blog/bg-p/PowerAppsBlog Power Automate: https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog Copilot Studios: https://powerusers.microsoft.com/t5/Power-Virtual-Agents-Community/bg-p/PVACommunityBlogPower Pages: https://powerusers.microsoft.com/t5/Power-Pages-Community-Blog/bg-p/mpp_blog   When you follow the link, look for a button like the one below on the right rail of your community blog, and let us know you're interested. We can't wait to connect with you and help you get started. Thanks for being part of our incredible community--and thanks for becoming part of the community blog!  

June 2024 Community Newsletter

It's time for the June Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzcreativeopinionExpiscornovus Fubar AmikNived_NambiarPstork1OliverRodriguesmmbr1606ManishSolankifernandosilvaragavanrajanBCBuizerExpiscornovusrenatoromaoLucas001timlAlexEncodianViswavEmadBeshaiDBO_DVDeenujiUmiantaChrist0fGochixVishnuReddy1997citron-trucmandelaVishalJhaverieetuRoboJohanTprathyooanandm08VictorIvanidzenicoxrfm1964shashankbhidepaulbeck1 rpaa   LATEST NEWS Summer of Solutions 2024 The Summer of Solutions challenge kicked off this month - an amazing Microsoft Community initiative to win free tickets to the Power Platform Community Conferencethis September in Las Vegas. The challenge is NOW OPEN to all #PowerPlatform community members and will consist of four weekly entry periods until July 14th, 2024. Click the image below to find out more on how you can win free tickets to #PPCC24 by entering the Summer of Solutions TODAY!   Microsoft Customer Stories We're constantly working with an array of great businesses across the globe to assist them in taking advantage of the latest business applications technology. If you'd like to find out more about their low code journeys, click the image below to view our playlist of Customer Stories to discover how Accenture, Lumen Technologies, Cineplex, and many more, are streamlining their business processes with Microsoft Power Platform.     Microsoft Leap Program Have you heard of Microsoft Leap - a global program designed to recruit, develop, and upskill unconventional talent for careers in the tech space. Microsoft Leap organizes a number of pathways into the industry, including the recent "NFL Legend Cohort - Technical Program Management" run jointly with the NFL Player Care Foundation (PCF) who are dedicated to helping retired players improve their quality of life. Click the image below to find out more about the great day shared at the Redmond campus and be sure to visit the Microsoft Leap website to discover how this amazing initiative is helping re-launch the lives of countless individuals. www.leap.microsoft.com       UPCOMING EVENTS Biz Apps Partner Summit | Seattle | July 24-25 It's not long now until the Biz Apps Partner Summit, which takes place at the Hilton Bellevue in Seattle on July 24-25, 2024. This event is the perfect place to network, connect, and learn how to scale your Microsoft practice, drive profitable revenue, and dazzle your customers! There's a great selection of speakers, including the likes of Tom Patterson, Donald Kossmann Joseph Corigliano, Cecilia Flombaum, Peter Jensen, John Siefert, Becky Lymberis, Daniel Rippey, and many more. Click the image below to find out more and register today!     TechCon365 & Power Platform Conference | D.C. | August 12-16 Things are hotting up for the next TechCon365 & PWRCON Conference in Washington D.C. on August 12-16, 2024. Featuring the likes of Tamara Bredemus, Sunny Eltepu, Lindsay Shelton, Brian Alderman, Daniel Glenn, Julie Turner, Jim Novak, John White, Jason Himmelstein, Luc Labelle, Emily Mancini, MVP, UXMC, Fabian Williams, Emma Wiehe,and many more, this is the perfect event for those that are looking to gain invaluable insights from industry experts. Click the image below to grab your tickets today!     Power Platform Community Conference | Vegas | Sept. 18-20th Are you ready to come and join the fun in Las Vegas this September at PPCC24? This event is the perfect place to connect with fellow business applications enthusiasts and share your knowledge with the worldwide Microsoft Community. Now's your chance to hold all the aces. Just click the image below to find out more and we hope to see you go ALL-IN this September in Las Vegas!     For more events, click the image below to visit the Community Days website.  

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (3,307)