cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
JonathanM
Frequent Visitor

HTTP Post multipart/form-data

Hi,

 

I am trying to post SharePoint files to a 3rd party via their API.  Their API uses multipart/form-data.  After some trial and error, I can POSTcontent, but only text files come out correctly on the destination.  Other files (Excel, Word, jpg, etc.) post, but the data is not readable. What do I need to do to the file content to format it properly?

 

Thanks!

 

http post.png

 

51 REPLIES 51
v-yuazh-msft
Community Support
Community Support

Hi @JonathanM,

 

The file content is with type base 64 when the files with type Excel, Word, jpg, etc.

 

Best regards,

Alice

Thanks Alice.  I've tried converting the content a variety of ways, but have not been able to get it converted properly.  What should the formula be to convert the file content?

 

Thanks,

 

Jonathan

Anonymous
Not applicable

@JonathanM Did you ever resolve this issue?

How were you able to post text files using this method in the first place? Everthing I try just converts the whole string to base64 and flow completely ignores the multipart sections.

I'm trying to do it now through swagger but still no luck yet.

Any updates you have here would be much appreciated.

 

Thanks,

Sam

Hi @Anonymous 

 

This worked for me for any type of content (text, Word, Excel, etc.)

2019-04-02_08h15_42.png

Anonymous
Not applicable

@JonathanM Thanks for this.

Unfortunately it's not working for me. I'm posting to the API for Atlassian Jira Cloud.

It responds with a code of 200 but no file is actually created.

 

2019-04-02_1817.png

Anonymous
Not applicable

I got it working in the end. I had to specifically define the content type in the body

Screenshot 2019-04-02 at 22.10.53.png

@JonathanMor @Anonymous  Do you know how to modify the request body to include other parameters in the multi-part form? Your examples appear just to have a single part, which is the file itself.

Anonymous
Not applicable

@WillPage  What else are you trying to update?

 

Also are you able to make the call you wish from Postman? I used postman calls to a test flow I built to figure out the structure I needed. Perhaps you can do the same. If you have an example of the postman call then screenshot it here as well if you can.

@Anonymous  Thanks for responding.

 

It's a file upload to Bamboo HR. They need a bit of metadata with the file; a category, which is basically the folder it goes in and whether it's shared or not. Here's their doco https://www.bamboohr.com/api/documentation/employees.php#uploadEmployeeFile

 

It works fine in Postman, and it works fine posting plain text in the file content using the example copy-pasted in the documentation (with the category changed).

 

I've tried using your example and adding the metatdata as extra records in the $multipart object like this

 

{
  "$content-type": "multipart/form-data",
  "$multipart": [
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"category\""
      },
      "body": {
        "$content": "18"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"fileName\""
      },
      "body": {
        "$content": "test.bmp"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"share\""
      },
      "body": {
        "$content": "yes"
      }
    },
    {
      "headers:": {
        "Content-Disposition": "form-data; name = \"file\"; filename=\"test.bmp\""
      },
      "body": {
        "$content-type": "application/octet-stream",
        "$content": {
          "$content-type": "image/bmp",
          "$content": "iVBORw0KGgoAAA............Jggg=="
        }
      }
    }
  ]
}

However, I get 403 Forbidden back from the server. File category 18 is the only one I have write access to, so there's every chance the metadata isn't being sent properly and it's denying me to write whatever the default file category is.

 

Here's the screen shot from Postman:Capture.PNG

 

What I pasted as the request body there was copied from the output of a failed run. I spotted that Flow is adding its own record for the body... However, it still fails with a 403:

 

Request body as seen in the designer:

{
  "$content-type": "multipart/form-data",
  "$multipart": [
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"category\""
      },
      "body": {
        "$content": "18"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"fileName\""
      },
      "body": {
        "$content": "test.bmp"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"share\""
      },
      "body": {
        "$content": "yes"
      }
    },
    {
      "headers:": {
        "Content-Disposition": "form-data; name = \"file\"; filename=\"test.bmp\""
      },
      "body":  @{body('Get_file_content_using_path')}
      
    }
  ]
}

And as seen in the output of a failed run:

 

{
  "$content-type": "multipart/form-data",
  "$multipart": [
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"category\""
      },
      "body": {
        "$content": "18"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"fileName\""
      },
      "body": {
        "$content": "test.bmp"
      }
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"share\""
      },
      "body": {
        "$content": "yes"
      }
    },
    {
      "headers:": {
        "Content-Disposition": "form-data; name = \"file\"; filename=\"test.bmp\""
      },
      "body": {
        "$content-type": "image/bmp",
        "$content": "iVBORw.................Jggg=="
      }
    }
  ]
}
Anonymous
Not applicable

@WillPage  Sorry for the late reply.

 

1) Does your postman flow work?

2) Assuming it does work, change the endpoint of the postman flow to a new flow just with an HTTP request trigger (add just a compose or something so you can save it. Then run it once and open the log of the flow that ran then copy the body received by the HTTP trigger here. If one of the items youve posted above is already this then let me know which one.

 

Sam

@AnonymousNow that I've done that it's clear why it isn't working.

 

This is the body of the request coming from Postman, as captured by a flow with HTTP trigger:

 

----------------------------633613363255592221149085
Content-Disposition: form-data; name="category"

18
----------------------------633613363255592221149085
Content-Disposition: form-data; name="fileName"

Will Page - Signed Induction.pdf
----------------------------633613363255592221149085
Content-Disposition: form-data; name="share"

yes
----------------------------633613363255592221149085
Content-Disposition: form-data; name="file"; filename="Will Page - Signed Induction.pdf"
Content-Type: application/pdf

%PDF-1.7
... Rest of PDF file.

 

 

..and this is from Flow:

 

--cbd9b14e-6955-43e3-a757-c4e5d1d3d3c3
Content-Type: application/json; charset=utf-8
Content-Disposition: form-data; name="category"

{"$content":"18"}
--cbd9b14e-6955-43e3-a757-c4e5d1d3d3c3
Content-Type: application/json; charset=utf-8
Content-Disposition: form-data; name="fileName"

{"$content":"Will Page - Signed Induction.pdf"}
--cbd9b14e-6955-43e3-a757-c4e5d1d3d3c3
Content-Type: application/json; charset=utf-8
Content-Disposition: form-data; name="share"

{"$content":"yes"}
--cbd9b14e-6955-43e3-a757-c4e5d1d3d3c3
content-type: application/pdf

%PDF-1.7
... Rest of PDF file

 

 

I do note that the file content is not corrupt. It looks the same as the original in a text editor at least, which is more than can be said when adding dynamic content from a Get file content action directly into a plain text request body, (like the output from Postman above or the example on the Bamboo HR documentation).

 

Now, if I can define the multipart boundaries using JSON, and the file content but have the metadata as plain text this would work. Is that possible, or am I going to have to do this in an Azure Function?

So, this body:

 

{
  "$content-type": "multipart/form-data",
  "$multipart": [
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"category\""
      },
      "body": "18"
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"fileName\""
      },
      "body": "Will Page - Signed Induction.pdf"
  
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"share\""
      },
      "body": "yes"
    },
    {
      "headers:": {
        "Content-Disposition": "form-data; name=\"file\"; filename=\"Will Page - Signed Induction.pdf\""
      },
      "body": @{body('Get_file_content')}
    }
  ]
}

Gives me this output:

--3b77c044-c94c-4156-8322-01ca7e812bcb
Content-Type: text/plain; charset=utf-8
Content-Disposition: form-data; name="category"

18
--3b77c044-c94c-4156-8322-01ca7e812bcb
Content-Type: text/plain; charset=utf-8
Content-Disposition: form-data; name="fileName"

Will Page - Signed Induction.pdf
--3b77c044-c94c-4156-8322-01ca7e812bcb
Content-Type: text/plain; charset=utf-8
Content-Disposition: form-data; name="share"

yes
--3b77c044-c94c-4156-8322-01ca7e812bcb
content-type: application/pdf

%PDF-1.7

...which looks OK apart from the Content-Type header I didn't ask for in each section. Unfortunately though, The Bamboo HR API gives me a 400 error when I send it this. Guess I'm stuck!

This is the error coming back from the Bamboo HR API now....

Capture.PNG

It's just clicked. For some reason the last part:

 

 {
      "headers:": {
        "Content-Disposition": "form-data; name=\"file\"; filename=\"Will Page - Signed Induction.pdf\"",
"Content-Type": "application/pdf"
      },
      "body": @{body('Get_file_content')}
    }

When run through the Flow comes out without the Content-Disposition attached:

--4a6c27da-af8b-479d-af08-824f21977c40
content-type: application/pdf

%PDF-1.7
..Rest of PDF

--4a6c27da-af8b-479d-af08-824f21977c40

..so close but not quite there!

@AnonymousThanks so much for your help. I finally figured this out:

 

{
  "$content-type": "multipart/form-data",
  "$multipart": [
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"category\""
      },
      "body": "18"
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"fileName\""
      },
      "body": "Will Page - Signed Induction.pdf"
    },
    {
      "headers": {
        "Content-Disposition": "form-data; name=\"share\""
      },
      "body": "yes"
    },
    {
      "headers": {
"Content-Disposition": "form-data; name=\"file\"; filename=\"Will Page - Signed Induction.pdf\""},
      "body": {
"$content-type": "application/pdf",
"$content": "@{base64(body('Get_file_content'))}"
}
    }
  ]
}

Without your tip of creating a Flow to capture and debug the output I'd have spent a million years on this - having that info was crucial.

 

The last part was simply to convert the output of Get file content to Base64 rather than feed the raw content straight into the Flow and let it infer the content type and create an object out of it.

 

So happy to see this working!

Anonymous
Not applicable

@WillPage So happy to see you've got it working! 

Glad to be of service.

davidlist87
Advocate I
Advocate I

Hi Guys,

 

I was wondering if you could help with my problem.

 

I am try to POST an image to a machine learning service but I'm getting a weird error back.

JPG is one of the only content types allowable. I have tested this using Postman multipart/form-data but I am struggling to POST is using raw JSON.

Image 1.jpgImage 3.jpg

 

You need to show us the body of your HTTP request and the error message, to be in with any chance of getting help.

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.    👉Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS   Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!   Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!       Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!   UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!   European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!     Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!     For more events, click the image below to visit the Microsoft Community Days website.      

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Users online (3,128)