cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
f2
Helper II
Helper II

How to convert SPO list outputs to a specific naming convention

Wondering if anybody could help me wrap my head around the steps I would need to take for this, I'm searching google but I'm not too sure what exactly I should be looking for.

 

1)

A user fills in a SPO list by selecting the choices given and the "status" will change from "info required" to "in progress" for that row. Its at this point the flow runs, I would like to then use this data to update the group tag within Intune via Graph (and eventually other things like primary user, device name etc but I'm currently stuck at the first hurdle).

 

SPO List example:

mem_flow_question.png

This part works ok.

 

2)

Current flow:

mem_flow_question.png

Flow is kicked off based off with the trigger:

@equals(triggerBody()?['Status'],'In Progress')

Here is the "Output" from "Select"

mem_flow_question_output.png

This part also seems to work, although I'm still learning and perhaps there is a better way. Anyway, its at this point I'm stuck. The SPO list has multiple choices for each column and I was hoping to collect the data and abbreviate it for the "GroupTag".

For example, the output for this particular record

Location-DeviceType-UserType-Department-Var-Enviroment

"PLocation-Laptop-Support-Computing-1-Production"

I would like somehow get:

P-LT-SUP-COMP-1-PRD

 

But it could be any of these, I will be adding more departments eventually:

grouptag_examples.JPG

 

How could I build the flow so it will convert the output of this record and future records to match my abbreviations/naming convention above? I hope that all makes sense.

 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Apologies, I think we went a bit too far down a rabbit hole in our previous thread, @f2 .

 

I went so deep because modern SharePoint often commits changes immediately when you edit values or change them in the list. So your flow might run WAY more than it should. Which could cause you problems down the line.

 

Plus, if you intend to place "P-LT-SUP-COMP-1-PRD" into a field on the list, then that's a much larger problem. Because if you run a trigger on anything that is created or modified, then if you modify the list later in that flow you will cause a loop.

 

That would be bad.

 

So unfortunately, I think that your best bet, here, would be to use a tiresome, long, calculated column, in SharePoint.

 

I made a list called choices, and it had two choice columns:

  1. choiceuno
  2. choicedos

 

This was my calculated column:

 

 

=CONCATENATE(
  IF(
    choiceuno="ZOOM",
    "Z",
    IF(
      choiceuno="I'm a 빛",
      "빛",
      IF(
        choiceuno="Hip",
        "H",
        IF(
          choiceuno="Chuck",
          "Ck",
          IF(
            choiceuno="GANJI",
            "GJ",
            ""
          )
        )
      )
    )
  ),
  IF(
    choicedos="",
    "",
    "-"
  ),
  IF(
    choicedos="CL",
    "C",
    IF(
      choicedos="PSY",
      "P",
      IF(
        choicedos="JESSI",
        "J",
        ""
      )
    )
  )
)

 

 

This was a bit painful, but I think now you see what you're up against, if you wish to make another list column with the data.

 

---

 

However, if you wish to use the data elsewhere, then you can do one of two simple things:

  1. Use a simpler, hidden, calculated column for each choice column, which just generates the abbrieviation.
  2. Maintain a separate list for each choice column, and change the choice columns to lookups.

 

The second one is an excellent choice, here. Your users can still choose which option they need to choose, and you can setup a second column to in the SharePoint list which pulls the abbrieviation from the other list.

 

This is a good choice because it allows you more control over adding more options to your choices, without having to get intimate with the main list, plus any further flows/calculations will be unharmed.

 

But the issue with incremental changes to the SharePoint list could still cause you issues here. As if someone updates CLocation, then clicks elsewhere ... then updates GLocation ... that's two changes that get sent to your flow and your other application.

View solution in original post

9 REPLIES 9
eliotcole
Super User
Super User

Why not use a Microsoft Form (or SharePoint / other form) to input to the list?

 

This way the flow trigger can be left as is.

 

All new items will be fully set-up as per what you have already. Then, if an item is modified, you can choose to run a different set of tasks on the item.

 

Alternatively, if you know that they only input once, then just change the trigger to new items only.

f2
Helper II
Helper II

Hi eliotcole!

 

Perhaps I'm over looking MS Forms, I will try explain why I thought using a SPO list would be best and maybe you could correct me if I can achieve a better result using something else like Forms?

 

If I could get this all working I would be adding hundreds of device to this list but only device serial, hardware hash and internal asset tags only. I was going to then suggest another group who will be handing these devices to users at different sites just need to take a laptop off the shelf, look at internal tag, match internal tag in list and fill in the rest (primary user, location etc). I thought by only giving the users a choice it will prevent any errors as its easy to mistype these boring tags manually. Could something similar be doing with MS Forms?

 

You actually reminded me I have created a flow before using a form and was able to use an IF statement to change a radio button from "Staff" to "educationStaff" so I got the right template name in a teams request form:

if(equals(outputs('Get_response_details')?['body/r291e2c40167d48eda60003c09b6cf3dd'],string('Staff')),'educationStaff',if(equals(outputs('Get_response_details')?

 

But I've been unable to find a way to get the "guid" (if thats what its called) from my SPO list, plus with the amount of options I assumed there might be a smarter way to achieve it.

 

Thanks!

I mean, it's up to you, but updating a SharePoint list from the inputs of a Microsoft Form is simplicity, and you won't need help there.

 

So for one off additions from staff it will definitely simplify your business process here.

 

If you're looking to input a lot of data, then I would recommend that you build a one off flow to interpret a given source of data and input it into the list. Obviously sort out your flow, first, mind. 😉

 

f2
Helper II
Helper II

I've been trying to think how a MS Form would work in my instance, would the submitted form overwrite the data that is already there for that record or would it add an additional row? I need to keep the device serial and hardware hash intact so I can then use all the data to update things in Intune.

 

Instead, could I add a 2nd array then somehow match/replace the values found in the 1st array? Something like this:

 

 

 

[
  {
    "Location": "CLocation",
    "Abbreviation": "C-"
  },
  {
    "Location": "GLocation",
    "Abbreviation": "G-"
  },
  {
    "Location": "PLocation",
    "Abbreviation": "P-"
  },
  {
    "Device Type": "Desktop",
    "Abbreviation": "DT-"
  },
  {
    "Device Type": "Laptop",
    "Abbreviation": "LT-"
  },
  {
    "Device Type": "Shared",
    "Abbreviation": "SH-"
  },
  {
    "Device Type": "Kiosk",
    "Abbreviation": "KS-"
  },
  {
    "Device Type": "Phone",
    "Abbreviation": "PH-"
  },
  {
    "Device Type": "Tablet",
    "Abbreviation": "TB-"
  },
  {
    "Device Type": "VM",
    "Abbreviation": "VM-"
  },
  {
    "UserType": "Lecturer",
    "Abbreviation": "LEC-"
  },
  {
    "UserType": "Support",
    "Abbreviation": "SUP-"
  },
  {
    "UserType": "Student",
    "Abbreviation": "STU-"
  },
  {
    "Variation": "1",
    "Abbreviation": "1-"
  },
  {
    "Variation": "2",
    "Abbreviation": "2-"
  },
  {
    "Variation": "3",
    "Abbreviation": "3-"
  },
  {
    "Variation": "4",
    "Abbreviation": "4-"
  },
  {
    "Enviroment": "Production",
    "Abbreviation": "PRD-"
  },
  {
    "Enviroment": "Test",
    "Abbreviation": "TST-"
  },
  {
    "Enviroment": "Canary",
    "Abbreviation": "CAN-"
  },
  {
    "DeviceType": "Desktop",
    "Abbreviation": "DT-"
  },
  {
    "Location": "Laptop",
    "Abbreviation": "LT-"
  },
  {
    "Location": "Shared",
    "Abbreviation": "SH-"
  },
  {
    "DeviceType": "Kiosk",
    "Abbreviation": "KS-"
  },
  {
    "Location": "Phone",
    "Abbreviation": "PH-"
  },
  {
    "Location": "Tablet",
    "Abbreviation": "TB-"
  },
  {
    "Location": "Phone",
    "Abbreviation": "PH-"
  },
  {
    "User Type": "Lecturer",
    "Abbreviation": "LEC-"
  },
  {
    "User Type": "Support",
    "Abbreviation": "SUP-"
  },
  {
    "User Type": "Student",
    "Abbreviation": "STU-"
  },
  {
    "Var": "1",
    "Abbreviation": "1-"
  },
  {
    "Var": "2",
    "Abbreviation": "2-"
  },
  {
    "Var": "3",
    "Abbreviation": "3-"
  },
  {
    "Var": "4",
    "Abbreviation": "4-"
  },
  {
    "Enviroment": "Production",
    "Abbreviation": "PRD"
  },
  {
    "Enviroment": "Test",
    "Abbreviation": "TST"
  },
  {
    "Enviroment": "Canary",
    "Abbreviation": "CAN"
  }
]

 

 

 

Then use IF or Replace expressions? Any ideas if this would be possible?

Apologies, I think we went a bit too far down a rabbit hole in our previous thread, @f2 .

 

I went so deep because modern SharePoint often commits changes immediately when you edit values or change them in the list. So your flow might run WAY more than it should. Which could cause you problems down the line.

 

Plus, if you intend to place "P-LT-SUP-COMP-1-PRD" into a field on the list, then that's a much larger problem. Because if you run a trigger on anything that is created or modified, then if you modify the list later in that flow you will cause a loop.

 

That would be bad.

 

So unfortunately, I think that your best bet, here, would be to use a tiresome, long, calculated column, in SharePoint.

 

I made a list called choices, and it had two choice columns:

  1. choiceuno
  2. choicedos

 

This was my calculated column:

 

 

=CONCATENATE(
  IF(
    choiceuno="ZOOM",
    "Z",
    IF(
      choiceuno="I'm a 빛",
      "빛",
      IF(
        choiceuno="Hip",
        "H",
        IF(
          choiceuno="Chuck",
          "Ck",
          IF(
            choiceuno="GANJI",
            "GJ",
            ""
          )
        )
      )
    )
  ),
  IF(
    choicedos="",
    "",
    "-"
  ),
  IF(
    choicedos="CL",
    "C",
    IF(
      choicedos="PSY",
      "P",
      IF(
        choicedos="JESSI",
        "J",
        ""
      )
    )
  )
)

 

 

This was a bit painful, but I think now you see what you're up against, if you wish to make another list column with the data.

 

---

 

However, if you wish to use the data elsewhere, then you can do one of two simple things:

  1. Use a simpler, hidden, calculated column for each choice column, which just generates the abbrieviation.
  2. Maintain a separate list for each choice column, and change the choice columns to lookups.

 

The second one is an excellent choice, here. Your users can still choose which option they need to choose, and you can setup a second column to in the SharePoint list which pulls the abbrieviation from the other list.

 

This is a good choice because it allows you more control over adding more options to your choices, without having to get intimate with the main list, plus any further flows/calculations will be unharmed.

 

But the issue with incremental changes to the SharePoint list could still cause you issues here. As if someone updates CLocation, then clicks elsewhere ... then updates GLocation ... that's two changes that get sent to your flow and your other application.

f2
Helper II
Helper II

I saw my post disappear to page 3 and started to loose hope lol. Thanks for persevering with me eliotcole, I really do appreciate it.

Well it works, you have no idea how happy it made me to see those abbreviations, I've spent so much time googling/watching youtube videos on how to do that!

 

prefix_example.JPG

The first example is missing a field (Variation) so the "Status" is prompting for more info but the 2nd example is completed and "Status" has changed to "In Progress" (this will change to "Completed" once I finish the rest of the flow).

My code is slightly different to your example, are the extra "" quotations needed or was that just an example for more choices?

 

code question.JPG

 

Here is my code, your example was really easy to follow and easy for me to update as needed.

 

 

 

=CONCATENATE(
  IF(Location="CLocation","C-",
    IF(Location="GLocation","G-",
      IF(Location="PLocation","P-",))),
  IF(DeviceType="Desktop","DT-",
    IF(DeviceType="Laptop","LT-",
      IF(DeviceType="Shared","SH-",
        IF(DeviceType="Kiosk","KS-",
           IF(DeviceType="Phone","PH-",
            IF(DeviceType="Tablet","TB-",
              IF(DeviceType="VM","VM",))))))),
  IF(UserType="Lecturer","LEC-",
    IF(UserType="Support","SUP-",
      IF(UserType="Student","STU-",))),
  IF(Department="Business","BUSI-",
    IF(Department="Computing","COMP-",
      IF(Department="Design","DESI-",
        IF(Department="Engineering","ENGI-",
          IF(Department="Hospitality","HOSP-",
            IF(Department="HR","HR-",
              IF(Department="Finance","FINA-",))))))),
  IF(Variation="1","1-",
    IF(Variation="2","2-",
      IF(Variation="3","3-",
        IF(Variation="4","4-",)))),
  IF(Environment="Production","PRD",
    IF(Environment="Canary","CAN",
      IF(Environment="Test","TST",))),
)

 

 

 

 

So if all looks well, I will go and setup a 2nd list and link them as you suggested.

 

Just one more question, you mentioned at the end of your post that it could cause issues if somebody makes two changes, I dont think I mentioned this but my status column in the SPO list has the following formula:

 

 

 

=IF(OR(ISBLANK(Location),
        ISBLANK(DeviceType),
        ISBLANK(UserType),
        ISBLANK(Department),
        ISBLANK(Variation),
        ISBLANK(Environment)),
"Info Required","In Progress")

 

 

 

 

 

Then my Flow has a trigger condition:

 

 

 

@equals(triggerBody()?['Status'],'In Progress') 
@not(equals(triggerBody()?['Status'],'Info Required')) 
@not(equals(triggerBody()?['Status'],'null'))

 

 

 

 

and finally

I filter the "Get Items" step to only include "In Progress"

fri example.JPG

Would that help any potential issues with multiple changes being recorded?

The double quotes are to provide blank responses if there is not a value chosen, and to decide whether or not to place a dash in between if there is a blank entry. 😉

 

So, I provided it to you in that fashion so that you could just add more.

 

You see that my calculated formula doesn't have the dashes in the abbreviations?

 

So inbetween each IF() cascade it calculates if it needs to add a dash. The more columns, the more it will need to check, of course ... but I honestly couldn't be bothered to dive that deep down the IF() rabbit hole after all that burrowing around earlier. 😅

 

---

 

With regards to your flow ... as long as the flow does not modify the list item, then you should be fine. 😊

 

If you want to modify the items in the list, then you run the risk of looping. 😩

 

You might be able to save it with a (hidden!) 'processed' column in SharePoint, which indicates 0 for unprocessed and 1 for processed. Then as long as you don't have it showing on any forms, views, etc, it should be relatively safe. Then include a further IF() on your calculated column to account for it and add a 'Processed' status, and an extra not(equals()) trigger condition for it, too.

 

However I would personally recommend processing any further modifications that you need to perform on the list items elsewhere. It *might* be doable, though, with the above.

f2
Helper II
Helper II

Thanks for going into detail and explaining the proper way to add the dashes, I assumed it was more for my benefit ie "just add more choices here". Doh.

 

The hidden/processed column is a great idea too, I'll try do that over the weekend so I at least have something in place while I figure out how to create/link the second "working" list that you mentioned in your previous post as it sounds like that is the better solution going forward.

 

You've given me a lot of think about plus I will be able to re-use these tricks I've picked up in future flows. So chuffed those abbreviations are now working and making progress again, awesome stuff eliotcole!

 

No worries, @f2 !

 

I don't usually say this, but you'd be more than welcome to click 'Accept as Solution' on one (or more) of the posts I made that got you there. If only so that people know that this got sorted out. 😊👍

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.    👉Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS   Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!   Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!       Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!   UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!   European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!     Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!     For more events, click the image below to visit the Microsoft Community Days website.      

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Users online (4,905)