cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
f2
Helper II
Helper II

How to convert SPO list outputs to a specific naming convention

Wondering if anybody could help me wrap my head around the steps I would need to take for this, I'm searching google but I'm not too sure what exactly I should be looking for.

 

1)

A user fills in a SPO list by selecting the choices given and the "status" will change from "info required" to "in progress" for that row. Its at this point the flow runs, I would like to then use this data to update the group tag within Intune via Graph (and eventually other things like primary user, device name etc but I'm currently stuck at the first hurdle).

 

SPO List example:

mem_flow_question.png

This part works ok.

 

2)

Current flow:

mem_flow_question.png

Flow is kicked off based off with the trigger:

@equals(triggerBody()?['Status'],'In Progress')

Here is the "Output" from "Select"

mem_flow_question_output.png

This part also seems to work, although I'm still learning and perhaps there is a better way. Anyway, its at this point I'm stuck. The SPO list has multiple choices for each column and I was hoping to collect the data and abbreviate it for the "GroupTag".

For example, the output for this particular record

Location-DeviceType-UserType-Department-Var-Enviroment

"PLocation-Laptop-Support-Computing-1-Production"

I would like somehow get:

P-LT-SUP-COMP-1-PRD

 

But it could be any of these, I will be adding more departments eventually:

grouptag_examples.JPG

 

How could I build the flow so it will convert the output of this record and future records to match my abbreviations/naming convention above? I hope that all makes sense.

 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Apologies, I think we went a bit too far down a rabbit hole in our previous thread, @f2 .

 

I went so deep because modern SharePoint often commits changes immediately when you edit values or change them in the list. So your flow might run WAY more than it should. Which could cause you problems down the line.

 

Plus, if you intend to place "P-LT-SUP-COMP-1-PRD" into a field on the list, then that's a much larger problem. Because if you run a trigger on anything that is created or modified, then if you modify the list later in that flow you will cause a loop.

 

That would be bad.

 

So unfortunately, I think that your best bet, here, would be to use a tiresome, long, calculated column, in SharePoint.

 

I made a list called choices, and it had two choice columns:

  1. choiceuno
  2. choicedos

 

This was my calculated column:

 

 

=CONCATENATE(
  IF(
    choiceuno="ZOOM",
    "Z",
    IF(
      choiceuno="I'm a 빛",
      "빛",
      IF(
        choiceuno="Hip",
        "H",
        IF(
          choiceuno="Chuck",
          "Ck",
          IF(
            choiceuno="GANJI",
            "GJ",
            ""
          )
        )
      )
    )
  ),
  IF(
    choicedos="",
    "",
    "-"
  ),
  IF(
    choicedos="CL",
    "C",
    IF(
      choicedos="PSY",
      "P",
      IF(
        choicedos="JESSI",
        "J",
        ""
      )
    )
  )
)

 

 

This was a bit painful, but I think now you see what you're up against, if you wish to make another list column with the data.

 

---

 

However, if you wish to use the data elsewhere, then you can do one of two simple things:

  1. Use a simpler, hidden, calculated column for each choice column, which just generates the abbrieviation.
  2. Maintain a separate list for each choice column, and change the choice columns to lookups.

 

The second one is an excellent choice, here. Your users can still choose which option they need to choose, and you can setup a second column to in the SharePoint list which pulls the abbrieviation from the other list.

 

This is a good choice because it allows you more control over adding more options to your choices, without having to get intimate with the main list, plus any further flows/calculations will be unharmed.

 

But the issue with incremental changes to the SharePoint list could still cause you issues here. As if someone updates CLocation, then clicks elsewhere ... then updates GLocation ... that's two changes that get sent to your flow and your other application.

View solution in original post

9 REPLIES 9
eliotcole
Super User
Super User

Why not use a Microsoft Form (or SharePoint / other form) to input to the list?

 

This way the flow trigger can be left as is.

 

All new items will be fully set-up as per what you have already. Then, if an item is modified, you can choose to run a different set of tasks on the item.

 

Alternatively, if you know that they only input once, then just change the trigger to new items only.

f2
Helper II
Helper II

Hi eliotcole!

 

Perhaps I'm over looking MS Forms, I will try explain why I thought using a SPO list would be best and maybe you could correct me if I can achieve a better result using something else like Forms?

 

If I could get this all working I would be adding hundreds of device to this list but only device serial, hardware hash and internal asset tags only. I was going to then suggest another group who will be handing these devices to users at different sites just need to take a laptop off the shelf, look at internal tag, match internal tag in list and fill in the rest (primary user, location etc). I thought by only giving the users a choice it will prevent any errors as its easy to mistype these boring tags manually. Could something similar be doing with MS Forms?

 

You actually reminded me I have created a flow before using a form and was able to use an IF statement to change a radio button from "Staff" to "educationStaff" so I got the right template name in a teams request form:

if(equals(outputs('Get_response_details')?['body/r291e2c40167d48eda60003c09b6cf3dd'],string('Staff')),'educationStaff',if(equals(outputs('Get_response_details')?

 

But I've been unable to find a way to get the "guid" (if thats what its called) from my SPO list, plus with the amount of options I assumed there might be a smarter way to achieve it.

 

Thanks!

I mean, it's up to you, but updating a SharePoint list from the inputs of a Microsoft Form is simplicity, and you won't need help there.

 

So for one off additions from staff it will definitely simplify your business process here.

 

If you're looking to input a lot of data, then I would recommend that you build a one off flow to interpret a given source of data and input it into the list. Obviously sort out your flow, first, mind. 😉

 

f2
Helper II
Helper II

I've been trying to think how a MS Form would work in my instance, would the submitted form overwrite the data that is already there for that record or would it add an additional row? I need to keep the device serial and hardware hash intact so I can then use all the data to update things in Intune.

 

Instead, could I add a 2nd array then somehow match/replace the values found in the 1st array? Something like this:

 

 

 

[
  {
    "Location": "CLocation",
    "Abbreviation": "C-"
  },
  {
    "Location": "GLocation",
    "Abbreviation": "G-"
  },
  {
    "Location": "PLocation",
    "Abbreviation": "P-"
  },
  {
    "Device Type": "Desktop",
    "Abbreviation": "DT-"
  },
  {
    "Device Type": "Laptop",
    "Abbreviation": "LT-"
  },
  {
    "Device Type": "Shared",
    "Abbreviation": "SH-"
  },
  {
    "Device Type": "Kiosk",
    "Abbreviation": "KS-"
  },
  {
    "Device Type": "Phone",
    "Abbreviation": "PH-"
  },
  {
    "Device Type": "Tablet",
    "Abbreviation": "TB-"
  },
  {
    "Device Type": "VM",
    "Abbreviation": "VM-"
  },
  {
    "UserType": "Lecturer",
    "Abbreviation": "LEC-"
  },
  {
    "UserType": "Support",
    "Abbreviation": "SUP-"
  },
  {
    "UserType": "Student",
    "Abbreviation": "STU-"
  },
  {
    "Variation": "1",
    "Abbreviation": "1-"
  },
  {
    "Variation": "2",
    "Abbreviation": "2-"
  },
  {
    "Variation": "3",
    "Abbreviation": "3-"
  },
  {
    "Variation": "4",
    "Abbreviation": "4-"
  },
  {
    "Enviroment": "Production",
    "Abbreviation": "PRD-"
  },
  {
    "Enviroment": "Test",
    "Abbreviation": "TST-"
  },
  {
    "Enviroment": "Canary",
    "Abbreviation": "CAN-"
  },
  {
    "DeviceType": "Desktop",
    "Abbreviation": "DT-"
  },
  {
    "Location": "Laptop",
    "Abbreviation": "LT-"
  },
  {
    "Location": "Shared",
    "Abbreviation": "SH-"
  },
  {
    "DeviceType": "Kiosk",
    "Abbreviation": "KS-"
  },
  {
    "Location": "Phone",
    "Abbreviation": "PH-"
  },
  {
    "Location": "Tablet",
    "Abbreviation": "TB-"
  },
  {
    "Location": "Phone",
    "Abbreviation": "PH-"
  },
  {
    "User Type": "Lecturer",
    "Abbreviation": "LEC-"
  },
  {
    "User Type": "Support",
    "Abbreviation": "SUP-"
  },
  {
    "User Type": "Student",
    "Abbreviation": "STU-"
  },
  {
    "Var": "1",
    "Abbreviation": "1-"
  },
  {
    "Var": "2",
    "Abbreviation": "2-"
  },
  {
    "Var": "3",
    "Abbreviation": "3-"
  },
  {
    "Var": "4",
    "Abbreviation": "4-"
  },
  {
    "Enviroment": "Production",
    "Abbreviation": "PRD"
  },
  {
    "Enviroment": "Test",
    "Abbreviation": "TST"
  },
  {
    "Enviroment": "Canary",
    "Abbreviation": "CAN"
  }
]

 

 

 

Then use IF or Replace expressions? Any ideas if this would be possible?

Apologies, I think we went a bit too far down a rabbit hole in our previous thread, @f2 .

 

I went so deep because modern SharePoint often commits changes immediately when you edit values or change them in the list. So your flow might run WAY more than it should. Which could cause you problems down the line.

 

Plus, if you intend to place "P-LT-SUP-COMP-1-PRD" into a field on the list, then that's a much larger problem. Because if you run a trigger on anything that is created or modified, then if you modify the list later in that flow you will cause a loop.

 

That would be bad.

 

So unfortunately, I think that your best bet, here, would be to use a tiresome, long, calculated column, in SharePoint.

 

I made a list called choices, and it had two choice columns:

  1. choiceuno
  2. choicedos

 

This was my calculated column:

 

 

=CONCATENATE(
  IF(
    choiceuno="ZOOM",
    "Z",
    IF(
      choiceuno="I'm a 빛",
      "빛",
      IF(
        choiceuno="Hip",
        "H",
        IF(
          choiceuno="Chuck",
          "Ck",
          IF(
            choiceuno="GANJI",
            "GJ",
            ""
          )
        )
      )
    )
  ),
  IF(
    choicedos="",
    "",
    "-"
  ),
  IF(
    choicedos="CL",
    "C",
    IF(
      choicedos="PSY",
      "P",
      IF(
        choicedos="JESSI",
        "J",
        ""
      )
    )
  )
)

 

 

This was a bit painful, but I think now you see what you're up against, if you wish to make another list column with the data.

 

---

 

However, if you wish to use the data elsewhere, then you can do one of two simple things:

  1. Use a simpler, hidden, calculated column for each choice column, which just generates the abbrieviation.
  2. Maintain a separate list for each choice column, and change the choice columns to lookups.

 

The second one is an excellent choice, here. Your users can still choose which option they need to choose, and you can setup a second column to in the SharePoint list which pulls the abbrieviation from the other list.

 

This is a good choice because it allows you more control over adding more options to your choices, without having to get intimate with the main list, plus any further flows/calculations will be unharmed.

 

But the issue with incremental changes to the SharePoint list could still cause you issues here. As if someone updates CLocation, then clicks elsewhere ... then updates GLocation ... that's two changes that get sent to your flow and your other application.

f2
Helper II
Helper II

I saw my post disappear to page 3 and started to loose hope lol. Thanks for persevering with me eliotcole, I really do appreciate it.

Well it works, you have no idea how happy it made me to see those abbreviations, I've spent so much time googling/watching youtube videos on how to do that!

 

prefix_example.JPG

The first example is missing a field (Variation) so the "Status" is prompting for more info but the 2nd example is completed and "Status" has changed to "In Progress" (this will change to "Completed" once I finish the rest of the flow).

My code is slightly different to your example, are the extra "" quotations needed or was that just an example for more choices?

 

code question.JPG

 

Here is my code, your example was really easy to follow and easy for me to update as needed.

 

 

 

=CONCATENATE(
  IF(Location="CLocation","C-",
    IF(Location="GLocation","G-",
      IF(Location="PLocation","P-",))),
  IF(DeviceType="Desktop","DT-",
    IF(DeviceType="Laptop","LT-",
      IF(DeviceType="Shared","SH-",
        IF(DeviceType="Kiosk","KS-",
           IF(DeviceType="Phone","PH-",
            IF(DeviceType="Tablet","TB-",
              IF(DeviceType="VM","VM",))))))),
  IF(UserType="Lecturer","LEC-",
    IF(UserType="Support","SUP-",
      IF(UserType="Student","STU-",))),
  IF(Department="Business","BUSI-",
    IF(Department="Computing","COMP-",
      IF(Department="Design","DESI-",
        IF(Department="Engineering","ENGI-",
          IF(Department="Hospitality","HOSP-",
            IF(Department="HR","HR-",
              IF(Department="Finance","FINA-",))))))),
  IF(Variation="1","1-",
    IF(Variation="2","2-",
      IF(Variation="3","3-",
        IF(Variation="4","4-",)))),
  IF(Environment="Production","PRD",
    IF(Environment="Canary","CAN",
      IF(Environment="Test","TST",))),
)

 

 

 

 

So if all looks well, I will go and setup a 2nd list and link them as you suggested.

 

Just one more question, you mentioned at the end of your post that it could cause issues if somebody makes two changes, I dont think I mentioned this but my status column in the SPO list has the following formula:

 

 

 

=IF(OR(ISBLANK(Location),
        ISBLANK(DeviceType),
        ISBLANK(UserType),
        ISBLANK(Department),
        ISBLANK(Variation),
        ISBLANK(Environment)),
"Info Required","In Progress")

 

 

 

 

 

Then my Flow has a trigger condition:

 

 

 

@equals(triggerBody()?['Status'],'In Progress') 
@not(equals(triggerBody()?['Status'],'Info Required')) 
@not(equals(triggerBody()?['Status'],'null'))

 

 

 

 

and finally

I filter the "Get Items" step to only include "In Progress"

fri example.JPG

Would that help any potential issues with multiple changes being recorded?

The double quotes are to provide blank responses if there is not a value chosen, and to decide whether or not to place a dash in between if there is a blank entry. 😉

 

So, I provided it to you in that fashion so that you could just add more.

 

You see that my calculated formula doesn't have the dashes in the abbreviations?

 

So inbetween each IF() cascade it calculates if it needs to add a dash. The more columns, the more it will need to check, of course ... but I honestly couldn't be bothered to dive that deep down the IF() rabbit hole after all that burrowing around earlier. 😅

 

---

 

With regards to your flow ... as long as the flow does not modify the list item, then you should be fine. 😊

 

If you want to modify the items in the list, then you run the risk of looping. 😩

 

You might be able to save it with a (hidden!) 'processed' column in SharePoint, which indicates 0 for unprocessed and 1 for processed. Then as long as you don't have it showing on any forms, views, etc, it should be relatively safe. Then include a further IF() on your calculated column to account for it and add a 'Processed' status, and an extra not(equals()) trigger condition for it, too.

 

However I would personally recommend processing any further modifications that you need to perform on the list items elsewhere. It *might* be doable, though, with the above.

f2
Helper II
Helper II

Thanks for going into detail and explaining the proper way to add the dashes, I assumed it was more for my benefit ie "just add more choices here". Doh.

 

The hidden/processed column is a great idea too, I'll try do that over the weekend so I at least have something in place while I figure out how to create/link the second "working" list that you mentioned in your previous post as it sounds like that is the better solution going forward.

 

You've given me a lot of think about plus I will be able to re-use these tricks I've picked up in future flows. So chuffed those abbreviations are now working and making progress again, awesome stuff eliotcole!

 

No worries, @f2 !

 

I don't usually say this, but you'd be more than welcome to click 'Accept as Solution' on one (or more) of the posts I made that got you there. If only so that people know that this got sorted out. 😊👍

Helpful resources

Announcements

Win free tickets to the Power Platform Conference | Summer of Solutions

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**

Celebrating the June Super User of the Month: Markus Franz

Markus Franz is a phenomenal contributor to the Power Apps Community. Super Users like Markus inspire others through their example, encouragement, and active participation.    The Why: "I do this to help others achieve what they are trying to do. As a total beginner back then without IT background I know how overwhelming things can be, so I decided to jump in and help others. I also do this to keep progressing and learning myself." Thank you, Markus Franz, for your outstanding work! Keep inspiring others and making a difference in the community! 🎉  Keep up the fantastic work! 👏👏 Markus Franz | LinkedIn  Power Apps: mmbr1606  

Copilot Cookbook Challenge | Week 1 Results | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge is a great way to showcase your creativity and connect with others. Plus, you could win tickets to the Power Platform Community Conference in Las Vegas in September 2024 as an amazing bonus.   Two ways to enter: 1. Copilot Studio Cookbook Gallery:  https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge.   Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  @Dhanush 2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a

Your Moment to Shine: 2024 PPCC’s Got Power Awards Show

For the third year, we invite you, our talented community members, to participate in the grand 2024 Power Platform Community Conference's Got Power Awards. This event is your opportunity to showcase solutions that make a significant business impact, highlight extensive use of Power Platform products, demonstrate good governance, or tell an inspirational story. Share your success stories, inspire your peers, and show off some hidden talents.  This is your time to shine and bring your creations into the spotlight!  Make your mark, inspire others and leave a lasting impression. Sign up today for a chance to showcase your solution and win the coveted 2024 PPCC’s Got Power Award. This year we have three categories for you to participate in: Technical Solution Demo, Storytelling, and Hidden Talent.      The Technical solution demo category showcases your applications, automated workflows, copilot agentic experiences, web pages, AI capabilities, dashboards, and/or more. We want to see your most impactful Power Platform solutions!  The Storytelling category is where you can share your inspiring story, and the Hidden Talent category is where your talents (such as singing, dancing, jump roping, etc.) can shine! Submission Details:  Fill out the submission form https://aka.ms/PPCCGotPowerSignup by July 12th with details and a 2–5-minute video showcasing your Solution impact. (Please let us know you're coming to PPCC, too!)After review by a panel of Microsoft judges, the top storytellers will be invited to present a virtual demo presentation to the judges during early August. You’ll be notified soon after if you have been selected as a finalist to share your story live at PPCC’s Got Power!  The live show will feature the solution demos and storytelling talents of the top contestants, winner announcements, and the opportunity to network with your community.  It's not just a showcase for technical talent and storytelling showmanship, show it's a golden opportunity to make connections and celebrate our Community together! Let's make this a memorable event! See you there!   Mark your calendars! Date and Time: Thursday, Sept 19th Location: PPCC24 at the MGM Grand, Las Vegas, NV 

Tuesday Tip | Accepting Solutions

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   To enhance our collaborative environment, it's important to acknowledge when your question has been answered satisfactorily. Here's a quick guide on how to accept a solution to your questions: Find the Helpful Reply: Navigate to the reply that has effectively answered your question.Accept as Solution: Look for the "Accept as Solution" button or link, usually located at the bottom of the reply.Confirm Your Selection: Clicking this button may prompt you for confirmation. Go ahead and confirm that this is indeed the solution.Acknowledgment: Once accepted, the reply will be highlighted, and the original post will be marked as "Solved". This helps other community members find the same solution quickly. By marking a reply as an accepted solution, you not only thank the person who helped you but also make it easier for others with similar questions to find answers. Let's continue to support each other by recognizing helpful contributions. 

Reminder: To register for the Community Ambassador Call on June 13th

Calling all Super Users & User Group Leaders   Reminder: To register for the Community Ambassador Call on June 13th—for an exclusive event for User Group Leaders and Super Users! This month is packed with exciting updates and activities within our community.   What's Happening: Community Updates: We'll share the latest developments and what's new in our vibrant community.Special Guest Speaker: Get ready for an insightful talk and live demo of Microsoft Copilot Studio templates by our special guest.Regular Updates: Stay informed with our routine updates for User Groups and Super Users.Community Insights: We'll provide general information about ongoing and upcoming community initiatives. Don't Miss Out: Register Now: Choose the session that fits your schedule best.Check your private messages or Super User Forum for registration links. We're excited to connect with you and continue building a stronger community together.   See you at the call!  

Users online (2,300)