cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
f2
Helper II
Helper II

How to convert SPO list outputs to a specific naming convention

Wondering if anybody could help me wrap my head around the steps I would need to take for this, I'm searching google but I'm not too sure what exactly I should be looking for.

 

1)

A user fills in a SPO list by selecting the choices given and the "status" will change from "info required" to "in progress" for that row. Its at this point the flow runs, I would like to then use this data to update the group tag within Intune via Graph (and eventually other things like primary user, device name etc but I'm currently stuck at the first hurdle).

 

SPO List example:

mem_flow_question.png

This part works ok.

 

2)

Current flow:

mem_flow_question.png

Flow is kicked off based off with the trigger:

@equals(triggerBody()?['Status'],'In Progress')

Here is the "Output" from "Select"

mem_flow_question_output.png

This part also seems to work, although I'm still learning and perhaps there is a better way. Anyway, its at this point I'm stuck. The SPO list has multiple choices for each column and I was hoping to collect the data and abbreviate it for the "GroupTag".

For example, the output for this particular record

Location-DeviceType-UserType-Department-Var-Enviroment

"PLocation-Laptop-Support-Computing-1-Production"

I would like somehow get:

P-LT-SUP-COMP-1-PRD

 

But it could be any of these, I will be adding more departments eventually:

grouptag_examples.JPG

 

How could I build the flow so it will convert the output of this record and future records to match my abbreviations/naming convention above? I hope that all makes sense.

 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions

Apologies, I think we went a bit too far down a rabbit hole in our previous thread, @f2 .

 

I went so deep because modern SharePoint often commits changes immediately when you edit values or change them in the list. So your flow might run WAY more than it should. Which could cause you problems down the line.

 

Plus, if you intend to place "P-LT-SUP-COMP-1-PRD" into a field on the list, then that's a much larger problem. Because if you run a trigger on anything that is created or modified, then if you modify the list later in that flow you will cause a loop.

 

That would be bad.

 

So unfortunately, I think that your best bet, here, would be to use a tiresome, long, calculated column, in SharePoint.

 

I made a list called choices, and it had two choice columns:

  1. choiceuno
  2. choicedos

 

This was my calculated column:

 

 

=CONCATENATE(
  IF(
    choiceuno="ZOOM",
    "Z",
    IF(
      choiceuno="I'm a 빛",
      "빛",
      IF(
        choiceuno="Hip",
        "H",
        IF(
          choiceuno="Chuck",
          "Ck",
          IF(
            choiceuno="GANJI",
            "GJ",
            ""
          )
        )
      )
    )
  ),
  IF(
    choicedos="",
    "",
    "-"
  ),
  IF(
    choicedos="CL",
    "C",
    IF(
      choicedos="PSY",
      "P",
      IF(
        choicedos="JESSI",
        "J",
        ""
      )
    )
  )
)

 

 

This was a bit painful, but I think now you see what you're up against, if you wish to make another list column with the data.

 

---

 

However, if you wish to use the data elsewhere, then you can do one of two simple things:

  1. Use a simpler, hidden, calculated column for each choice column, which just generates the abbrieviation.
  2. Maintain a separate list for each choice column, and change the choice columns to lookups.

 

The second one is an excellent choice, here. Your users can still choose which option they need to choose, and you can setup a second column to in the SharePoint list which pulls the abbrieviation from the other list.

 

This is a good choice because it allows you more control over adding more options to your choices, without having to get intimate with the main list, plus any further flows/calculations will be unharmed.

 

But the issue with incremental changes to the SharePoint list could still cause you issues here. As if someone updates CLocation, then clicks elsewhere ... then updates GLocation ... that's two changes that get sent to your flow and your other application.

View solution in original post

9 REPLIES 9
eliotcole
Super User
Super User

Why not use a Microsoft Form (or SharePoint / other form) to input to the list?

 

This way the flow trigger can be left as is.

 

All new items will be fully set-up as per what you have already. Then, if an item is modified, you can choose to run a different set of tasks on the item.

 

Alternatively, if you know that they only input once, then just change the trigger to new items only.

f2
Helper II
Helper II

Hi eliotcole!

 

Perhaps I'm over looking MS Forms, I will try explain why I thought using a SPO list would be best and maybe you could correct me if I can achieve a better result using something else like Forms?

 

If I could get this all working I would be adding hundreds of device to this list but only device serial, hardware hash and internal asset tags only. I was going to then suggest another group who will be handing these devices to users at different sites just need to take a laptop off the shelf, look at internal tag, match internal tag in list and fill in the rest (primary user, location etc). I thought by only giving the users a choice it will prevent any errors as its easy to mistype these boring tags manually. Could something similar be doing with MS Forms?

 

You actually reminded me I have created a flow before using a form and was able to use an IF statement to change a radio button from "Staff" to "educationStaff" so I got the right template name in a teams request form:

if(equals(outputs('Get_response_details')?['body/r291e2c40167d48eda60003c09b6cf3dd'],string('Staff')),'educationStaff',if(equals(outputs('Get_response_details')?

 

But I've been unable to find a way to get the "guid" (if thats what its called) from my SPO list, plus with the amount of options I assumed there might be a smarter way to achieve it.

 

Thanks!

I mean, it's up to you, but updating a SharePoint list from the inputs of a Microsoft Form is simplicity, and you won't need help there.

 

So for one off additions from staff it will definitely simplify your business process here.

 

If you're looking to input a lot of data, then I would recommend that you build a one off flow to interpret a given source of data and input it into the list. Obviously sort out your flow, first, mind. 😉

 

f2
Helper II
Helper II

I've been trying to think how a MS Form would work in my instance, would the submitted form overwrite the data that is already there for that record or would it add an additional row? I need to keep the device serial and hardware hash intact so I can then use all the data to update things in Intune.

 

Instead, could I add a 2nd array then somehow match/replace the values found in the 1st array? Something like this:

 

 

 

[
  {
    "Location": "CLocation",
    "Abbreviation": "C-"
  },
  {
    "Location": "GLocation",
    "Abbreviation": "G-"
  },
  {
    "Location": "PLocation",
    "Abbreviation": "P-"
  },
  {
    "Device Type": "Desktop",
    "Abbreviation": "DT-"
  },
  {
    "Device Type": "Laptop",
    "Abbreviation": "LT-"
  },
  {
    "Device Type": "Shared",
    "Abbreviation": "SH-"
  },
  {
    "Device Type": "Kiosk",
    "Abbreviation": "KS-"
  },
  {
    "Device Type": "Phone",
    "Abbreviation": "PH-"
  },
  {
    "Device Type": "Tablet",
    "Abbreviation": "TB-"
  },
  {
    "Device Type": "VM",
    "Abbreviation": "VM-"
  },
  {
    "UserType": "Lecturer",
    "Abbreviation": "LEC-"
  },
  {
    "UserType": "Support",
    "Abbreviation": "SUP-"
  },
  {
    "UserType": "Student",
    "Abbreviation": "STU-"
  },
  {
    "Variation": "1",
    "Abbreviation": "1-"
  },
  {
    "Variation": "2",
    "Abbreviation": "2-"
  },
  {
    "Variation": "3",
    "Abbreviation": "3-"
  },
  {
    "Variation": "4",
    "Abbreviation": "4-"
  },
  {
    "Enviroment": "Production",
    "Abbreviation": "PRD-"
  },
  {
    "Enviroment": "Test",
    "Abbreviation": "TST-"
  },
  {
    "Enviroment": "Canary",
    "Abbreviation": "CAN-"
  },
  {
    "DeviceType": "Desktop",
    "Abbreviation": "DT-"
  },
  {
    "Location": "Laptop",
    "Abbreviation": "LT-"
  },
  {
    "Location": "Shared",
    "Abbreviation": "SH-"
  },
  {
    "DeviceType": "Kiosk",
    "Abbreviation": "KS-"
  },
  {
    "Location": "Phone",
    "Abbreviation": "PH-"
  },
  {
    "Location": "Tablet",
    "Abbreviation": "TB-"
  },
  {
    "Location": "Phone",
    "Abbreviation": "PH-"
  },
  {
    "User Type": "Lecturer",
    "Abbreviation": "LEC-"
  },
  {
    "User Type": "Support",
    "Abbreviation": "SUP-"
  },
  {
    "User Type": "Student",
    "Abbreviation": "STU-"
  },
  {
    "Var": "1",
    "Abbreviation": "1-"
  },
  {
    "Var": "2",
    "Abbreviation": "2-"
  },
  {
    "Var": "3",
    "Abbreviation": "3-"
  },
  {
    "Var": "4",
    "Abbreviation": "4-"
  },
  {
    "Enviroment": "Production",
    "Abbreviation": "PRD"
  },
  {
    "Enviroment": "Test",
    "Abbreviation": "TST"
  },
  {
    "Enviroment": "Canary",
    "Abbreviation": "CAN"
  }
]

 

 

 

Then use IF or Replace expressions? Any ideas if this would be possible?

Apologies, I think we went a bit too far down a rabbit hole in our previous thread, @f2 .

 

I went so deep because modern SharePoint often commits changes immediately when you edit values or change them in the list. So your flow might run WAY more than it should. Which could cause you problems down the line.

 

Plus, if you intend to place "P-LT-SUP-COMP-1-PRD" into a field on the list, then that's a much larger problem. Because if you run a trigger on anything that is created or modified, then if you modify the list later in that flow you will cause a loop.

 

That would be bad.

 

So unfortunately, I think that your best bet, here, would be to use a tiresome, long, calculated column, in SharePoint.

 

I made a list called choices, and it had two choice columns:

  1. choiceuno
  2. choicedos

 

This was my calculated column:

 

 

=CONCATENATE(
  IF(
    choiceuno="ZOOM",
    "Z",
    IF(
      choiceuno="I'm a 빛",
      "빛",
      IF(
        choiceuno="Hip",
        "H",
        IF(
          choiceuno="Chuck",
          "Ck",
          IF(
            choiceuno="GANJI",
            "GJ",
            ""
          )
        )
      )
    )
  ),
  IF(
    choicedos="",
    "",
    "-"
  ),
  IF(
    choicedos="CL",
    "C",
    IF(
      choicedos="PSY",
      "P",
      IF(
        choicedos="JESSI",
        "J",
        ""
      )
    )
  )
)

 

 

This was a bit painful, but I think now you see what you're up against, if you wish to make another list column with the data.

 

---

 

However, if you wish to use the data elsewhere, then you can do one of two simple things:

  1. Use a simpler, hidden, calculated column for each choice column, which just generates the abbrieviation.
  2. Maintain a separate list for each choice column, and change the choice columns to lookups.

 

The second one is an excellent choice, here. Your users can still choose which option they need to choose, and you can setup a second column to in the SharePoint list which pulls the abbrieviation from the other list.

 

This is a good choice because it allows you more control over adding more options to your choices, without having to get intimate with the main list, plus any further flows/calculations will be unharmed.

 

But the issue with incremental changes to the SharePoint list could still cause you issues here. As if someone updates CLocation, then clicks elsewhere ... then updates GLocation ... that's two changes that get sent to your flow and your other application.

f2
Helper II
Helper II

I saw my post disappear to page 3 and started to loose hope lol. Thanks for persevering with me eliotcole, I really do appreciate it.

Well it works, you have no idea how happy it made me to see those abbreviations, I've spent so much time googling/watching youtube videos on how to do that!

 

prefix_example.JPG

The first example is missing a field (Variation) so the "Status" is prompting for more info but the 2nd example is completed and "Status" has changed to "In Progress" (this will change to "Completed" once I finish the rest of the flow).

My code is slightly different to your example, are the extra "" quotations needed or was that just an example for more choices?

 

code question.JPG

 

Here is my code, your example was really easy to follow and easy for me to update as needed.

 

 

 

=CONCATENATE(
  IF(Location="CLocation","C-",
    IF(Location="GLocation","G-",
      IF(Location="PLocation","P-",))),
  IF(DeviceType="Desktop","DT-",
    IF(DeviceType="Laptop","LT-",
      IF(DeviceType="Shared","SH-",
        IF(DeviceType="Kiosk","KS-",
           IF(DeviceType="Phone","PH-",
            IF(DeviceType="Tablet","TB-",
              IF(DeviceType="VM","VM",))))))),
  IF(UserType="Lecturer","LEC-",
    IF(UserType="Support","SUP-",
      IF(UserType="Student","STU-",))),
  IF(Department="Business","BUSI-",
    IF(Department="Computing","COMP-",
      IF(Department="Design","DESI-",
        IF(Department="Engineering","ENGI-",
          IF(Department="Hospitality","HOSP-",
            IF(Department="HR","HR-",
              IF(Department="Finance","FINA-",))))))),
  IF(Variation="1","1-",
    IF(Variation="2","2-",
      IF(Variation="3","3-",
        IF(Variation="4","4-",)))),
  IF(Environment="Production","PRD",
    IF(Environment="Canary","CAN",
      IF(Environment="Test","TST",))),
)

 

 

 

 

So if all looks well, I will go and setup a 2nd list and link them as you suggested.

 

Just one more question, you mentioned at the end of your post that it could cause issues if somebody makes two changes, I dont think I mentioned this but my status column in the SPO list has the following formula:

 

 

 

=IF(OR(ISBLANK(Location),
        ISBLANK(DeviceType),
        ISBLANK(UserType),
        ISBLANK(Department),
        ISBLANK(Variation),
        ISBLANK(Environment)),
"Info Required","In Progress")

 

 

 

 

 

Then my Flow has a trigger condition:

 

 

 

@equals(triggerBody()?['Status'],'In Progress') 
@not(equals(triggerBody()?['Status'],'Info Required')) 
@not(equals(triggerBody()?['Status'],'null'))

 

 

 

 

and finally

I filter the "Get Items" step to only include "In Progress"

fri example.JPG

Would that help any potential issues with multiple changes being recorded?

The double quotes are to provide blank responses if there is not a value chosen, and to decide whether or not to place a dash in between if there is a blank entry. 😉

 

So, I provided it to you in that fashion so that you could just add more.

 

You see that my calculated formula doesn't have the dashes in the abbreviations?

 

So inbetween each IF() cascade it calculates if it needs to add a dash. The more columns, the more it will need to check, of course ... but I honestly couldn't be bothered to dive that deep down the IF() rabbit hole after all that burrowing around earlier. 😅

 

---

 

With regards to your flow ... as long as the flow does not modify the list item, then you should be fine. 😊

 

If you want to modify the items in the list, then you run the risk of looping. 😩

 

You might be able to save it with a (hidden!) 'processed' column in SharePoint, which indicates 0 for unprocessed and 1 for processed. Then as long as you don't have it showing on any forms, views, etc, it should be relatively safe. Then include a further IF() on your calculated column to account for it and add a 'Processed' status, and an extra not(equals()) trigger condition for it, too.

 

However I would personally recommend processing any further modifications that you need to perform on the list items elsewhere. It *might* be doable, though, with the above.

f2
Helper II
Helper II

Thanks for going into detail and explaining the proper way to add the dashes, I assumed it was more for my benefit ie "just add more choices here". Doh.

 

The hidden/processed column is a great idea too, I'll try do that over the weekend so I at least have something in place while I figure out how to create/link the second "working" list that you mentioned in your previous post as it sounds like that is the better solution going forward.

 

You've given me a lot of think about plus I will be able to re-use these tricks I've picked up in future flows. So chuffed those abbreviations are now working and making progress again, awesome stuff eliotcole!

 

No worries, @f2 !

 

I don't usually say this, but you'd be more than welcome to click 'Accept as Solution' on one (or more) of the posts I made that got you there. If only so that people know that this got sorted out. 😊👍

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!  Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Users online (5,272)