cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
N2P3
New Member

If SharePoint Folder create than create subfolder in the created folder

Hello everyone,

 

I have a challenge that I would like to solve automatically.

 

I would like that when I create a folder in a SharePoint document library (1st level), 5 subfolders (2nd level) automatically become in the created folder.

 

So I create a Vegetarian folder in the document library and the target screen should then look like this:

 

/Vegetarian
//Breakfast
//Brunch
//Lunch
//Teatime
//Dinner


Many thanks in advance and best regards
Nick

3 ACCEPTED SOLUTIONS

Accepted Solutions
ekarim2020
Super User
Super User

Here is a demo flow that should achieve the desired results:

Snag_239fe58a.png

1. THE TRIGGER

We start with the trigger When a file is created (properties only). Select the site and Library name:

Snag_23811636.png

We only want the flow to run if a new folder was created. We don't want the flow to trigger each time a new file is created. We can control when the flow runs or triggers by using a trigger condition:

Snag_23815cc5.png

Select Settings:

Snag_2381a3e0.png

Click add, then add the trigger condition:

Snag_2381f173.png

The flow will only trigger if a folder was created. You can copy-and-paste the following text into the Trigger Conditions:

 

 

 

 

@triggerOutputs()?['body/{IsFolder}']

 

 

 

 

Snag_2db424e0.png

 

2. THE LIST OF SUBFOLDER NAMES

Initialize an array variable to store the list of subfolder names that need to be created:

Snag_23867e6e.png

3. GET PATH UNDER WHICH SUBFOLDERS ARE TO BE CREATED

Use a compose variable to store the folder path under which the subfolders should be created. The path needs to be in the format: [Document Library name] / [New Folder Name].

 

You can copy-and-paste the following text into the Inputs of the Compose action:

 

 

 

 

@{first(split(triggerOutputs()?['body/{Path}'],'/'))}/@{triggerOutputs()?['body/{Name}']}

 

 

 

 

Snag_238afd9d.png

The full path looks something like this for a Document library called Lib1 and a new folder called Folder2: Lib1/Folder2 .

 

We split this text (Lib1/Folder2) at the '/' character then take the first part of the string which is Lib1, the name of the Document Library.  We then add / character followed by the new folder name. This compose variable holds path to where we expect the new folder to have been created i.e. under the root of the document library.  We will check to see if the folder was indeed created under the root of the document library in the next step.

 

4. CHECK THAT THE NEW FOLDER WAS CREATED UNDER THE ROOT

Add a condition action. We will check to see if the new folder (which triggered the flow) was created under the root of the document library.

Snag_2391e502.png

 

If the new folder was created under the root of the document library, then create the sub folders "Breakfast",
"Brunch","Lunch","Teatime" and "Dinner"

Snag_23972416.png

Snag_239c5280.png

You can paste the following directly into the Folder Path:

 

 

 

 

@{triggerOutputs()?['body/{Name}']}/@{items('Apply_to_each')}

 

 

 

 

Here is some sample runtime output:

Snag_23ad74fa.png

Hope this helps.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

View solution in original post

Hi @SPOLHE-C and @Timmay313 ,

 

Here is an updated version of the flow that I never posted. It is much simpler than the previous version:

ekarim2020_3-1651871649689.png

 

1. THE TRIGGER

We start with the trigger When a file is created (properties only). Select the site and Library name:

Snag_1046025a.png

The flow uses two trigger condutions for the When a file is created (properties only). We only want the flow to run if:

  1. A new folder was created,
  2. The folder was created under the root of the document library. 

We don't want the flow to trigger each time a new file is created and we don't want the flow to trigger each time a new folder is created that was NOT created under the root of the document library. We will control when the flow runs or triggers by using two trigger conditions:

Snag_1046332e.png

 

@triggerOutputs()?['body/{IsFolder}']
@equals(length(split(triggerOutputs()?['body/{FullPath}'],'/')),2)

 

The second trigger condition is used to detect if a folder was created under the root. The split function is used to  split the FullPath prorerty. FullPath is where the new folder was just created. We split the FullPath at the '/' character, then we count, using the length() function, how many elements the split() function produced. A value of 2 means that the folder was created under the root of the document library:

 

Snag_12dadffe.png

This trigger condition should prevent the flow from triggering itself again when the flow creates the subfolders "Breakfast", "Brunch", "Lunch", "Teatime" and "Dinner". The flow should only trigger if a folder was created under the root of the document library. 

 

2. THE LIST OF SUBFOLDER NAMES

Initialize an array variable to store the list of subfolder names that need to be created:

Snag_105a28eb.png

3. APPLY TO EACH LOOP - TO CREATE EACH SUBFOLDER

The subfolders will be created under the new Folder that triggered the flow in the When a file is created (properties only) action. The subfolders will be created using the path Folder Name/Subfolder Name:

Snag_10736a6f.png

Snag_1074a1e6.png

 

Here is a sample runtime output:

Snag_107de396.png

Hope this helps.

 

Ellis

View solution in original post

Hi @David6010 ,

 

Add a third trigger action so that the flow only triggers if the newly created folder has a folder path that contains 'Shared Documents/Share Area/DMcK'  . See trigger (3) below for an example:

ekarim2020_2-1657536532782.png

 

Your create action would be similar to the screen below:

ekarim2020_3-1657536628263.png

 

Name property contains the name of the new folder that triggered the flow.

 

Hope this helps.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

View solution in original post

35 REPLIES 35
ekarim2020
Super User
Super User

Yes, this should be possible.

 

The logic of the flow will resemble something like this:

ekarim2020_0-1641322943676.png

 

Was the object created in SharePoint a File or Folder?

Was the Folder created under the root of the Document Library?

I'll try to post a flow demo later.

 

Ellis

ekarim2020
Super User
Super User

Here is a demo flow that should achieve the desired results:

Snag_239fe58a.png

1. THE TRIGGER

We start with the trigger When a file is created (properties only). Select the site and Library name:

Snag_23811636.png

We only want the flow to run if a new folder was created. We don't want the flow to trigger each time a new file is created. We can control when the flow runs or triggers by using a trigger condition:

Snag_23815cc5.png

Select Settings:

Snag_2381a3e0.png

Click add, then add the trigger condition:

Snag_2381f173.png

The flow will only trigger if a folder was created. You can copy-and-paste the following text into the Trigger Conditions:

 

 

 

 

@triggerOutputs()?['body/{IsFolder}']

 

 

 

 

Snag_2db424e0.png

 

2. THE LIST OF SUBFOLDER NAMES

Initialize an array variable to store the list of subfolder names that need to be created:

Snag_23867e6e.png

3. GET PATH UNDER WHICH SUBFOLDERS ARE TO BE CREATED

Use a compose variable to store the folder path under which the subfolders should be created. The path needs to be in the format: [Document Library name] / [New Folder Name].

 

You can copy-and-paste the following text into the Inputs of the Compose action:

 

 

 

 

@{first(split(triggerOutputs()?['body/{Path}'],'/'))}/@{triggerOutputs()?['body/{Name}']}

 

 

 

 

Snag_238afd9d.png

The full path looks something like this for a Document library called Lib1 and a new folder called Folder2: Lib1/Folder2 .

 

We split this text (Lib1/Folder2) at the '/' character then take the first part of the string which is Lib1, the name of the Document Library.  We then add / character followed by the new folder name. This compose variable holds path to where we expect the new folder to have been created i.e. under the root of the document library.  We will check to see if the folder was indeed created under the root of the document library in the next step.

 

4. CHECK THAT THE NEW FOLDER WAS CREATED UNDER THE ROOT

Add a condition action. We will check to see if the new folder (which triggered the flow) was created under the root of the document library.

Snag_2391e502.png

 

If the new folder was created under the root of the document library, then create the sub folders "Breakfast",
"Brunch","Lunch","Teatime" and "Dinner"

Snag_23972416.png

Snag_239c5280.png

You can paste the following directly into the Folder Path:

 

 

 

 

@{triggerOutputs()?['body/{Name}']}/@{items('Apply_to_each')}

 

 

 

 

Here is some sample runtime output:

Snag_23ad74fa.png

Hope this helps.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

N2P3
New Member

Thank you very much!

I would like something like this but to trigger under the 2nd level or a subfolder. Parent Folder>Subfolder2<Populate this subfolder with the 5 folders. I have it set up just cant connect the path back to the subfolder2. 

Timmay313
Helper I
Helper I

Maybe something changed since this was posted, can't seem to get it to work through. It triggers and creates the new folders but created them in <Library>/<Library>/Folder/subfolder. creating a new folder named the same as the document library.

SPOLHE-C
Frequent Visitor

I've been getting a lot of errors on previously stable flows the past couple of weeks, so was pleasantly surprised when this didn't fail--but it also didn't create the subfolders. Run history shows the Apply to each as "skipped." Which is new to me!

Apply to each-skipped 2022-05-06.png

Any suggestions would be appreciated.

@SPOLHE-C  and @Timmay313 

Luckily I still have a version of this flow. I tested it and it is still working.

 

Here the flow succeeded, as a folder was created under the root directory:

ekarim2020_1-1651858518400.png

 

The skipped actions are due to a new folder being created, but it was not created under the root folder, so the flow doesn't need to take any further action. However, the flow also will be triggered by the flow itself(!) when creating the subfolders "Breakfast""Brunch",  "Lunch",  "Teatime"  and "Dinner" - as the flow triggers each time a folder is created. However, as these folders are not created under the root folder, the condition check will be false so the  flow doesn't need to take any further action and so will skip the Apply to each loop:

ekarim2020_0-1651858394103.png

The runtime output of the flow showing that the flow is being triggered by the flow itself when it creates each of the subfolders:

Snag_fcac680.png

You can add a compose action to see what is going on:

Snag_fc13b14.png

 

The sub folders will only be created if the SubFolderPath = Full Path.

 

Hope this helps.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

Created as a folder directly beneath the library without sub-folders, and, yes, that works. I can get your inputs = false and Apply to each = skipped from here by adding a level, so you are correct about the reason for the earlier failure, and I shall mark this as solved. Now off to figure out an automated move to go with that delay-then-copy-file code block that used to work...  

successful subfolders flow 2022-05-06.png

Hi @SPOLHE-C and @Timmay313 ,

 

Here is an updated version of the flow that I never posted. It is much simpler than the previous version:

ekarim2020_3-1651871649689.png

 

1. THE TRIGGER

We start with the trigger When a file is created (properties only). Select the site and Library name:

Snag_1046025a.png

The flow uses two trigger condutions for the When a file is created (properties only). We only want the flow to run if:

  1. A new folder was created,
  2. The folder was created under the root of the document library. 

We don't want the flow to trigger each time a new file is created and we don't want the flow to trigger each time a new folder is created that was NOT created under the root of the document library. We will control when the flow runs or triggers by using two trigger conditions:

Snag_1046332e.png

 

@triggerOutputs()?['body/{IsFolder}']
@equals(length(split(triggerOutputs()?['body/{FullPath}'],'/')),2)

 

The second trigger condition is used to detect if a folder was created under the root. The split function is used to  split the FullPath prorerty. FullPath is where the new folder was just created. We split the FullPath at the '/' character, then we count, using the length() function, how many elements the split() function produced. A value of 2 means that the folder was created under the root of the document library:

 

Snag_12dadffe.png

This trigger condition should prevent the flow from triggering itself again when the flow creates the subfolders "Breakfast", "Brunch", "Lunch", "Teatime" and "Dinner". The flow should only trigger if a folder was created under the root of the document library. 

 

2. THE LIST OF SUBFOLDER NAMES

Initialize an array variable to store the list of subfolder names that need to be created:

Snag_105a28eb.png

3. APPLY TO EACH LOOP - TO CREATE EACH SUBFOLDER

The subfolders will be created under the new Folder that triggered the flow in the When a file is created (properties only) action. The subfolders will be created using the path Folder Name/Subfolder Name:

Snag_10736a6f.png

Snag_1074a1e6.png

 

Here is a sample runtime output:

Snag_107de396.png

Hope this helps.

 

Ellis

That is simpler, doesn't accomplish what I am trying to do though. We use Teams along with SharePoint so all the sites are setup with the structure <Library>/<teams Channel>/<subfolders>. This allows the creation of subfolders within document library but not within the teams channel folders. 

 

Is it possible to create the array of folders when a folder is create in the 3rd level of the structure? 

Here is what i tried to do:

Timmay313_5-1652112050047.png

 

Timmay313_2-1652111535307.png

Timmay313_4-1652111616516.png

 

This triggers when a new folder is created in the 3rd level, DocLib/Channel/Folder/ but will recreate the folder as DocLib/Folder/subfolders.

Triggered by creation of this folder 

Timmay313_6-1652112100119.png

This is the output i get from the flow running. 

Timmay313_8-1652112152692.png

 

Try the following and let me know how you get on:

Snag_40735af.png

 

Snag_404fdc0.png

 

Snag_406609c.png

Hope this helps.

 

Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

Well, it didnt like the 3rd condition added to the trigger settings. removed that and left the rest. it ran and added subfolders to the trigger folder.

Thanks Ekarim2020,

 

It solved my solution Thank lot. Only problem I am seeing its taking 30 seconds to 50 seconds to create sub folders, I am creating just 5 folders. But it taking time. Any solution bro please advise.

 

Thanks

Jameel

Hi @jameela1 ,

 

30 -50 seconds is actually very responsive! A wait time is to be expected due to the nature of cloud services; it will never be instant. In my development environment the flow took about 50 seconds before it was triggered.

 

You can see how often this flow is configured to trigger by Microsoft:

Snag_3f91dc6.png

Snag_3f963c8.png

In the above case, the flow is triggered to run every 3 minutes.  Therefore, sometimes you may need to wait for up to three minutes before the flow triggered again - but there are other always factors involved too.  Your licensing plan for Power Automate will affect how frequently flows triggered along with other limits or entitlements. See Microsoft Power Apps, Microsoft Power Automate and Microsoft Power Virtual Agents Licensing Guide (P... 

 

Ellis

 

 

ok I understand, Thanks for your quick reply.

MathewM
Helper I
Helper I

@ekarim2020 

 

Thank you very much for such a detailed breakdown on this process, it works perfectly and saved me a bunch of time trying to figured how to check if a folder was created under the root.

Hi @ekarim2020

 

I have doubt what is the syntex for creating multilevel sub folders for example you are creating 5 folders in that first one is Breakfast in side that folder i need to create two sub folders like "Coffee", "Tea", in that what is the syntex for array. Please advise.

 

Thanks

HI @jameela1 ,

 

Just add any subfolders to the array using the following format:

 

[
"Breakfast",

"Breakfast/Coffee",

"Breakfast/Coffee/Nestle",

"Breakfast/Tea",

"Brunch",
"Lunch",
"Teatime",
"Dinner"
]

 

Note that if you only had the following path in the array:

"Breakfast/Coffee/Nestle"

 

SharePoint would create Breasfast, Coffee and Nestle folders in one action.

 

So in theory you could just have:

[

"Breakfast/Coffee/Nestle",

"Breakfast/Tea",

"Brunch",
"Lunch",
"Teatime",
"Dinner"
]

 

But the first array example may be far more readable.

 

Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

Thanks @ekarim2020 This is working perfectly..Thanks lot!!!

 

Is there is any possibility to setup security for example folder "Breakfast" should be access by Peter or GroupMembers other should not permit. Please advise.

 

Thanks

Helpful resources

Announcements

Power Platform Connections Ep 14 | J. Panchal | Thursday, 18 May 2023

Episode Fourteen of Power Platform Connections sees David Warner and Hugo Bernier talk to Microsoft PM Jocelyn Panchal, alongside the latest news, videos, product reviews, and community blogs.     Use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show.      Show schedule in this episode:  00:00 Cold Open 00:32 Show Intro 01:10 Jocelyn Panchal Interview 24:10 Blogs & Articles 29:50 Outro & Bloopers  Check out the blogs and articles featured in this week’s episode:   https://www.nathalieleenders.com/Blog/index.php/;focus=STRATP_com_cm4all_wdn_Flatpress_42136159&path=?x=entry:entry230511-101930#C_STRATP_com_cm4all_wdn_Flatpress_42136159__-anchor  @NathLeenders https://www.keithatherton.com/posts/2023-05-12-msbuild2023-cloud-skills-challenge/  @MrKeithAtherton https://elliskarim.com/2023/05/13/how-to-find-files-in-onedrive-that-match-a-naming-pattern/  @MrCaptainKarim https://www.linkedin.com/pulse/my-fond-memories-scottish-summit-2022-pranav-khurana/ @pranavkhuranauk https://www.linkedin.com/feed/update/urn:li:activity:7061777660745560064/?updateEntityUrn=urn%3Ali%3Afs_feedUpdate%3A%28V2%2Curn%3Ali%3Aactivity%3A7061777660745560064%29  @thevictordantas  Action requested: Feel free to provide feedback on how we can make our community more inclusive and diverse.  This episode premiered live on our YouTube at 12pm PST on Thursday 18th May 2023.  Video series available at Power Platform Community YouTube channel.  Upcoming events:  Power Apps Developers Summit – May 19-20th - London European Power Platform conference – Jun. 20-22nd - Dublin Microsoft Power Platform Conference – Oct. 3-5th - Las Vegas  Join our Communities:  Power Apps Community Power Automate Community Power Virtual Agents Community Power Pages Community  If you’d like to hear from a specific community member in an upcoming recording and/or have specific questions for the Power Platform Connections team, please let us know. We will do our best to address all your requests or questions.   

May 2023 Community Newsletter and Upcoming Events

Welcome to our May 2023 Community Newsletter, where we'll be highlighting the latest news, releases, upcoming events, and the great work of our members inside the Biz Apps communities. If you're new to this LinkedIn group, be sure to subscribe here in the News & Announcements to stay up to date with the latest news from our ever-growing membership network who "changed the way they thought about code".         LATEST NEWS "Mondays at Microsoft" LIVE on LinkedIn - 8am PST - Monday 15th May  - Grab your Monday morning coffee and come join Principal Program Managers Heather Cook and Karuana Gatimu for the premiere episode of "Mondays at Microsoft"! This show will kick off the launch of the new Microsoft Community LinkedIn channel and cover a whole host of hot topics from across the #PowerPlatform, #ModernWork, #Dynamics365, #AI, and everything in-between. Just click the image below to register and come join the team LIVE on Monday 15th May 2023 at 8am PST. Hope to see you there!     Executive Keynote | Microsoft Customer Success Day CVP for Business Applications & Platform, Charles Lamanna, shares the latest #BusinessApplications product enhancements and updates to help customers achieve their business outcomes.         S01E13 Power Platform Connections - 12pm PST - Thursday 11th May Episode Thirteen of Power Platform Connections sees Hugo Bernier take a deep dive into the mind of co-host David Warner II, alongside the reviewing the great work of Dennis Goedegebuure, Keith Atherton, Michael Megel, Cat Schneider, and more. Click below to subscribe and get notified, with David and Hugo LIVE in the YouTube chat from 12pm PST. And use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show.         UPCOMING EVENTS   European Power Platform Conference - early bird ticket sale ends! The European Power Platform Conference early bird ticket sale ends on Friday 12th May 2023! #EPPC23 brings together the Microsoft Power Platform Communities for three days of unrivaled days in-person learning, connections and inspiration, featuring three inspirational keynotes, six expert full-day tutorials, and over eighty-five specialist sessions, with guest speakers including April Dunnam, Dona Sarkar, Ilya Fainberg, Janet Robb, Daniel Laskewitz, Rui Santos, Jens Christian Schrøder, Marco Rocca, and many more. Deep dive into the latest product advancements as you hear from some of the brightest minds in the #PowerApps space. Click here to book your ticket today and save!      DynamicMinds Conference - Slovenia - 22-24th May 2023 It's not long now until the DynamicsMinds Conference, which takes place in Slovenia on 22nd - 24th May, 2023 - where brilliant minds meet, mingle & share! This great Power Platform and Dynamics 365 Conference features a whole host of amazing speakers, including the likes of Georg Glantschnig, Dona Sarkar, Tommy Skaue, Monique Hayward, Aleksandar Totovic, Rachel Profitt, Aurélien CLERE, Ana Inés Urrutia de Souza, Luca Pellegrini, Bostjan Golob, Shannon Mullins, Elena Baeva, Ivan Ficko, Guro Faller, Vivian Voss, Andrew Bibby, Tricia Sinclair, Roger Gilchrist, Sara Lagerquist, Steve Mordue, and many more. Click here: DynamicsMinds Conference for more info on what is sure an amazing community conference covering all aspects of Power Platform and beyond.    Days of Knowledge Conference in Denmark - 1-2nd June 2023 Check out 'Days of Knowledge', a Directions 4 Partners conference on 1st-2nd June in Odense, Denmark, which focuses on educating employees, sharing knowledge and upgrading Business Central professionals. This fantastic two-day conference offers a combination of training sessions and workshops - all with Business Central and related products as the main topic. There's a great list of industry experts sharing their knowledge, including Iona V., Bert Verbeek, Liza Juhlin, Douglas Romão, Carolina Edvinsson, Kim Dalsgaard Christensen, Inga Sartauskaite, Peik Bech-Andersen, Shannon Mullins, James Crowter, Mona Borksted Nielsen, Renato Fajdiga, Vivian Voss, Sven Noomen, Paulien Buskens, Andri Már Helgason, Kayleen Hannigan, Freddy Kristiansen, Signe Agerbo, Luc van Vugt, and many more. If you want to meet industry experts, gain an advantage in the SMB-market, and acquire new knowledge about Microsoft Dynamics Business Central, click here Days of Knowledge Conference in Denmark to buy your ticket today!   COMMUNITY HIGHLIGHTS Check out our top Super and Community Users reaching new levels! These hardworking members are posting, answering questions, kudos, and providing top solutions in their communities.   Power Apps:  Super Users: @WarrenBelz, @LaurensM  @BCBuizer  Community Users:  @Amik@ @mmollet, @Cr1t    Power Automate:  Super Users: @Expiscornovus , @grantjenkins, @abm  Community Users: @Nived_Nambiar, @ManishSolanki    Power Virtual Agents:  Super Users: @Pstork1, @Expiscornovus  Community Users: @JoseA, @fernandosilva, @angerfire1213    Power Pages: Super Users: @ragavanrajan  Community Users: @Fubar, @Madhankumar_L,@gospa  LATEST COMMUNITY BLOG ARTICLES  Power Apps Community Blog  Power Automate Community Blog  Power Virtual Agents Community Blog  Power Pages Community Blog  Check out 'Using the Community' for more helpful tips and information:  Power Apps , Power Automate, Power Virtual Agents, Power Pages 

Announcing | Super Users - 2023 Season 1

Super Users – 2023 Season 1    We are excited to kick off the Power Users Super User Program for 2023 - Season 1.  The Power Platform Super Users have done an amazing job in keeping the Power Platform communities helpful, accurate and responsive. We would like to send these amazing folks a big THANK YOU for their efforts.      Super User Season 1 | Contributions July 1, 2022 – December 31, 2022  Super User Season 2 | Contributions January 1, 2023 – June 30, 2023    Curious what a Super User is? Super Users are especially active community members who are eager to help others with their community questions. There are 2 Super User seasons in a year, and we monitor the community for new potential Super Users at the end of each season. Super Users are recognized in the community with both a rank name and icon next to their username, and a seasonal badge on their profile.  Power Apps  Power Automate  Power Virtual Agents  Power Pages  Pstork1*  Pstork1*  Pstork1*  OliverRodrigues  BCBuizer  Expiscornovus*  Expiscornovus*  ragavanrajan  AhmedSalih  grantjenkins  renatoromao    Mira_Ghaly*  Mira_Ghaly*      Sundeep_Malik*  Sundeep_Malik*      SudeepGhatakNZ*  SudeepGhatakNZ*      StretchFredrik*  StretchFredrik*      365-Assist*  365-Assist*      cha_cha  ekarim2020      timl  Hardesh15      iAm_ManCat  annajhaveri      SebS  Rhiassuring      LaurensM  abm      TheRobRush  Ankesh_49      WiZey  lbendlin      Nogueira1306  Kaif_Siddique      victorcp  RobElliott      dpoggemann  srduval      SBax  CFernandes      Roverandom  schwibach      Akser  CraigStewart      PowerRanger  MichaelAnnis      subsguts  David_MA      EricRegnier  edgonzales      zmansuri  GeorgiosG      ChrisPiasecki  ryule      AmDev  fchopo      phipps0218  tom_riha      theapurva  takolota     Akash17  momlo     BCLS776  Shuvam-rpa     rampprakash  ScottShearer     Rusk  ChristianAbata     cchannon  Koen5     a33ik  Heartholme     AaronKnox  okeks      Matren  David_MA     Alex_10        Jeff_Thorpe        poweractivate        Ramole        DianaBirkelbach        DavidZoon        AJ_Z        PriyankaGeethik        BrianS        StalinPonnusamy        HamidBee        CNT        Anonymous_Hippo        Anchov        KeithAtherton        alaabitar        Tolu_Victor        KRider        sperry1625        IPC_ahaas      zuurg    rubin_boer   cwebb365   Dorrinda   G1124   Gabibalaban   Manan-Malhotra   jcfDaniel   WarrenBelz   Waegemma   drrickryp   GuidoPreite   metsshan    If an * is at the end of a user's name this means they are a Multi Super User, in more than one community. Please note this is not the final list, as we are pending a few acceptances.  Once they are received the list will be updated. 

Check out the new Power Platform Communities Front Door Experience!

We are excited to share the ‘Power Platform Communities Front Door’ experience with you!   Front Door brings together content from all the Power Platform communities into a single place for our community members, customers and low-code, no-code enthusiasts to learn, share and engage with peers, advocates, community program managers and our product team members. There are a host of features and new capabilities now available on Power Platform Communities Front Door to make content more discoverable for all power product community users which includes ForumsUser GroupsEventsCommunity highlightsCommunity by numbersLinks to all communities Users can see top discussions from across all the Power Platform communities and easily navigate to the latest or trending posts for further interaction. Additionally, they can filter to individual products as well.   Users can filter and browse the user group events from all power platform products with feature parity to existing community user group experience and added filtering capabilities.     Users can now explore user groups on the Power Platform Front Door landing page with capability to view all products in Power Platform.      Explore Power Platform Communities Front Door today. Visit Power Platform Community Front door to easily navigate to the different product communities, view a roll up of user groups, events and forums.

Microsoft Power Platform Conference | Registration Open | Oct. 3-5 2023

We are so excited to see you for the Microsoft Power Platform Conference in Las Vegas October 3-5 2023! But first, let's take a look back at some fun moments and the best community in tech from MPPC 2022 in Orlando, Florida.   Featuring guest speakers such as Charles Lamanna, Heather Cook, Julie Strauss, Nirav Shah, Ryan Cunningham, Sangya Singh, Stephen Siciliano, Hugo Bernier and many more.   Register today: https://www.powerplatformconf.com/   

Users online (2,821)