cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
N2P3
New Member

If SharePoint Folder create than create subfolder in the created folder

Hello everyone,

 

I have a challenge that I would like to solve automatically.

 

I would like that when I create a folder in a SharePoint document library (1st level), 5 subfolders (2nd level) automatically become in the created folder.

 

So I create a Vegetarian folder in the document library and the target screen should then look like this:

 

/Vegetarian
//Breakfast
//Brunch
//Lunch
//Teatime
//Dinner


Many thanks in advance and best regards
Nick

3 ACCEPTED SOLUTIONS

Accepted Solutions
ekarim2020
Super User
Super User

Here is a demo flow that should achieve the desired results:

Snag_239fe58a.png

1. THE TRIGGER

We start with the trigger When a file is created (properties only). Select the site and Library name:

Snag_23811636.png

We only want the flow to run if a new folder was created. We don't want the flow to trigger each time a new file is created. We can control when the flow runs or triggers by using a trigger condition:

Snag_23815cc5.png

Select Settings:

Snag_2381a3e0.png

Click add, then add the trigger condition:

Snag_2381f173.png

The flow will only trigger if a folder was created. You can copy-and-paste the following text into the Trigger Conditions:

 

 

 

 

@triggerOutputs()?['body/{IsFolder}']

 

 

 

 

Snag_2db424e0.png

 

2. THE LIST OF SUBFOLDER NAMES

Initialize an array variable to store the list of subfolder names that need to be created:

Snag_23867e6e.png

3. GET PATH UNDER WHICH SUBFOLDERS ARE TO BE CREATED

Use a compose variable to store the folder path under which the subfolders should be created. The path needs to be in the format: [Document Library name] / [New Folder Name].

 

You can copy-and-paste the following text into the Inputs of the Compose action:

 

 

 

 

@{first(split(triggerOutputs()?['body/{Path}'],'/'))}/@{triggerOutputs()?['body/{Name}']}

 

 

 

 

Snag_238afd9d.png

The full path looks something like this for a Document library called Lib1 and a new folder called Folder2: Lib1/Folder2 .

 

We split this text (Lib1/Folder2) at the '/' character then take the first part of the string which is Lib1, the name of the Document Library.  We then add / character followed by the new folder name. This compose variable holds path to where we expect the new folder to have been created i.e. under the root of the document library.  We will check to see if the folder was indeed created under the root of the document library in the next step.

 

4. CHECK THAT THE NEW FOLDER WAS CREATED UNDER THE ROOT

Add a condition action. We will check to see if the new folder (which triggered the flow) was created under the root of the document library.

Snag_2391e502.png

 

If the new folder was created under the root of the document library, then create the sub folders "Breakfast",
"Brunch","Lunch","Teatime" and "Dinner"

Snag_23972416.png

Snag_239c5280.png

You can paste the following directly into the Folder Path:

 

 

 

 

@{triggerOutputs()?['body/{Name}']}/@{items('Apply_to_each')}

 

 

 

 

Here is some sample runtime output:

Snag_23ad74fa.png

Hope this helps.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

View solution in original post

Hi @SPOLHE-C and @Timmay313 ,

 

Here is an updated version of the flow that I never posted. It is much simpler than the previous version:

ekarim2020_3-1651871649689.png

 

1. THE TRIGGER

We start with the trigger When a file is created (properties only). Select the site and Library name:

Snag_1046025a.png

The flow uses two trigger condutions for the When a file is created (properties only). We only want the flow to run if:

  1. A new folder was created,
  2. The folder was created under the root of the document library. 

We don't want the flow to trigger each time a new file is created and we don't want the flow to trigger each time a new folder is created that was NOT created under the root of the document library. We will control when the flow runs or triggers by using two trigger conditions:

Snag_1046332e.png

 

@triggerOutputs()?['body/{IsFolder}']
@equals(length(split(triggerOutputs()?['body/{FullPath}'],'/')),2)

 

The second trigger condition is used to detect if a folder was created under the root. The split function is used to  split the FullPath prorerty. FullPath is where the new folder was just created. We split the FullPath at the '/' character, then we count, using the length() function, how many elements the split() function produced. A value of 2 means that the folder was created under the root of the document library:

 

Snag_12dadffe.png

This trigger condition should prevent the flow from triggering itself again when the flow creates the subfolders "Breakfast", "Brunch", "Lunch", "Teatime" and "Dinner". The flow should only trigger if a folder was created under the root of the document library. 

 

2. THE LIST OF SUBFOLDER NAMES

Initialize an array variable to store the list of subfolder names that need to be created:

Snag_105a28eb.png

3. APPLY TO EACH LOOP - TO CREATE EACH SUBFOLDER

The subfolders will be created under the new Folder that triggered the flow in the When a file is created (properties only) action. The subfolders will be created using the path Folder Name/Subfolder Name:

Snag_10736a6f.png

Snag_1074a1e6.png

 

Here is a sample runtime output:

Snag_107de396.png

Hope this helps.

 

Ellis

View solution in original post

Hi @David6010 ,

 

Add a third trigger action so that the flow only triggers if the newly created folder has a folder path that contains 'Shared Documents/Share Area/DMcK'  . See trigger (3) below for an example:

ekarim2020_2-1657536532782.png

 

Your create action would be similar to the screen below:

ekarim2020_3-1657536628263.png

 

Name property contains the name of the new folder that triggered the flow.

 

Hope this helps.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

View solution in original post

47 REPLIES 47
ekarim2020
Super User
Super User

Yes, this should be possible.

 

The logic of the flow will resemble something like this:

ekarim2020_0-1641322943676.png

 

Was the object created in SharePoint a File or Folder?

Was the Folder created under the root of the Document Library?

I'll try to post a flow demo later.

 

Ellis

ekarim2020
Super User
Super User

Here is a demo flow that should achieve the desired results:

Snag_239fe58a.png

1. THE TRIGGER

We start with the trigger When a file is created (properties only). Select the site and Library name:

Snag_23811636.png

We only want the flow to run if a new folder was created. We don't want the flow to trigger each time a new file is created. We can control when the flow runs or triggers by using a trigger condition:

Snag_23815cc5.png

Select Settings:

Snag_2381a3e0.png

Click add, then add the trigger condition:

Snag_2381f173.png

The flow will only trigger if a folder was created. You can copy-and-paste the following text into the Trigger Conditions:

 

 

 

 

@triggerOutputs()?['body/{IsFolder}']

 

 

 

 

Snag_2db424e0.png

 

2. THE LIST OF SUBFOLDER NAMES

Initialize an array variable to store the list of subfolder names that need to be created:

Snag_23867e6e.png

3. GET PATH UNDER WHICH SUBFOLDERS ARE TO BE CREATED

Use a compose variable to store the folder path under which the subfolders should be created. The path needs to be in the format: [Document Library name] / [New Folder Name].

 

You can copy-and-paste the following text into the Inputs of the Compose action:

 

 

 

 

@{first(split(triggerOutputs()?['body/{Path}'],'/'))}/@{triggerOutputs()?['body/{Name}']}

 

 

 

 

Snag_238afd9d.png

The full path looks something like this for a Document library called Lib1 and a new folder called Folder2: Lib1/Folder2 .

 

We split this text (Lib1/Folder2) at the '/' character then take the first part of the string which is Lib1, the name of the Document Library.  We then add / character followed by the new folder name. This compose variable holds path to where we expect the new folder to have been created i.e. under the root of the document library.  We will check to see if the folder was indeed created under the root of the document library in the next step.

 

4. CHECK THAT THE NEW FOLDER WAS CREATED UNDER THE ROOT

Add a condition action. We will check to see if the new folder (which triggered the flow) was created under the root of the document library.

Snag_2391e502.png

 

If the new folder was created under the root of the document library, then create the sub folders "Breakfast",
"Brunch","Lunch","Teatime" and "Dinner"

Snag_23972416.png

Snag_239c5280.png

You can paste the following directly into the Folder Path:

 

 

 

 

@{triggerOutputs()?['body/{Name}']}/@{items('Apply_to_each')}

 

 

 

 

Here is some sample runtime output:

Snag_23ad74fa.png

Hope this helps.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

N2P3
New Member

Thank you very much!

I would like something like this but to trigger under the 2nd level or a subfolder. Parent Folder>Subfolder2<Populate this subfolder with the 5 folders. I have it set up just cant connect the path back to the subfolder2. 

Timmay313
Helper I
Helper I

Maybe something changed since this was posted, can't seem to get it to work through. It triggers and creates the new folders but created them in <Library>/<Library>/Folder/subfolder. creating a new folder named the same as the document library.

SPOLHE-C
Frequent Visitor

I've been getting a lot of errors on previously stable flows the past couple of weeks, so was pleasantly surprised when this didn't fail--but it also didn't create the subfolders. Run history shows the Apply to each as "skipped." Which is new to me!

Apply to each-skipped 2022-05-06.png

Any suggestions would be appreciated.

@SPOLHE-C  and @Timmay313 

Luckily I still have a version of this flow. I tested it and it is still working.

 

Here the flow succeeded, as a folder was created under the root directory:

ekarim2020_1-1651858518400.png

 

The skipped actions are due to a new folder being created, but it was not created under the root folder, so the flow doesn't need to take any further action. However, the flow also will be triggered by the flow itself(!) when creating the subfolders "Breakfast""Brunch",  "Lunch",  "Teatime"  and "Dinner" - as the flow triggers each time a folder is created. However, as these folders are not created under the root folder, the condition check will be false so the  flow doesn't need to take any further action and so will skip the Apply to each loop:

ekarim2020_0-1651858394103.png

The runtime output of the flow showing that the flow is being triggered by the flow itself when it creates each of the subfolders:

Snag_fcac680.png

You can add a compose action to see what is going on:

Snag_fc13b14.png

 

The sub folders will only be created if the SubFolderPath = Full Path.

 

Hope this helps.


Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

Created as a folder directly beneath the library without sub-folders, and, yes, that works. I can get your inputs = false and Apply to each = skipped from here by adding a level, so you are correct about the reason for the earlier failure, and I shall mark this as solved. Now off to figure out an automated move to go with that delay-then-copy-file code block that used to work...  

successful subfolders flow 2022-05-06.png

Hi @SPOLHE-C and @Timmay313 ,

 

Here is an updated version of the flow that I never posted. It is much simpler than the previous version:

ekarim2020_3-1651871649689.png

 

1. THE TRIGGER

We start with the trigger When a file is created (properties only). Select the site and Library name:

Snag_1046025a.png

The flow uses two trigger condutions for the When a file is created (properties only). We only want the flow to run if:

  1. A new folder was created,
  2. The folder was created under the root of the document library. 

We don't want the flow to trigger each time a new file is created and we don't want the flow to trigger each time a new folder is created that was NOT created under the root of the document library. We will control when the flow runs or triggers by using two trigger conditions:

Snag_1046332e.png

 

@triggerOutputs()?['body/{IsFolder}']
@equals(length(split(triggerOutputs()?['body/{FullPath}'],'/')),2)

 

The second trigger condition is used to detect if a folder was created under the root. The split function is used to  split the FullPath prorerty. FullPath is where the new folder was just created. We split the FullPath at the '/' character, then we count, using the length() function, how many elements the split() function produced. A value of 2 means that the folder was created under the root of the document library:

 

Snag_12dadffe.png

This trigger condition should prevent the flow from triggering itself again when the flow creates the subfolders "Breakfast", "Brunch", "Lunch", "Teatime" and "Dinner". The flow should only trigger if a folder was created under the root of the document library. 

 

2. THE LIST OF SUBFOLDER NAMES

Initialize an array variable to store the list of subfolder names that need to be created:

Snag_105a28eb.png

3. APPLY TO EACH LOOP - TO CREATE EACH SUBFOLDER

The subfolders will be created under the new Folder that triggered the flow in the When a file is created (properties only) action. The subfolders will be created using the path Folder Name/Subfolder Name:

Snag_10736a6f.png

Snag_1074a1e6.png

 

Here is a sample runtime output:

Snag_107de396.png

Hope this helps.

 

Ellis

That is simpler, doesn't accomplish what I am trying to do though. We use Teams along with SharePoint so all the sites are setup with the structure <Library>/<teams Channel>/<subfolders>. This allows the creation of subfolders within document library but not within the teams channel folders. 

 

Is it possible to create the array of folders when a folder is create in the 3rd level of the structure? 

Here is what i tried to do:

Timmay313_5-1652112050047.png

 

Timmay313_2-1652111535307.png

Timmay313_4-1652111616516.png

 

This triggers when a new folder is created in the 3rd level, DocLib/Channel/Folder/ but will recreate the folder as DocLib/Folder/subfolders.

Triggered by creation of this folder 

Timmay313_6-1652112100119.png

This is the output i get from the flow running. 

Timmay313_8-1652112152692.png

 

Try the following and let me know how you get on:

Snag_40735af.png

 

Snag_404fdc0.png

 

Snag_406609c.png

Hope this helps.

 

Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

Well, it didnt like the 3rd condition added to the trigger settings. removed that and left the rest. it ran and added subfolders to the trigger folder.

Thanks Ekarim2020,

 

It solved my solution Thank lot. Only problem I am seeing its taking 30 seconds to 50 seconds to create sub folders, I am creating just 5 folders. But it taking time. Any solution bro please advise.

 

Thanks

Jameel

Hi @jameela1 ,

 

30 -50 seconds is actually very responsive! A wait time is to be expected due to the nature of cloud services; it will never be instant. In my development environment the flow took about 50 seconds before it was triggered.

 

You can see how often this flow is configured to trigger by Microsoft:

Snag_3f91dc6.png

Snag_3f963c8.png

In the above case, the flow is triggered to run every 3 minutes.  Therefore, sometimes you may need to wait for up to three minutes before the flow triggered again - but there are other always factors involved too.  Your licensing plan for Power Automate will affect how frequently flows triggered along with other limits or entitlements. See Microsoft Power Apps, Microsoft Power Automate and Microsoft Power Virtual Agents Licensing Guide (P... 

 

Ellis

 

 

ok I understand, Thanks for your quick reply.

MathewM
Helper I
Helper I

@ekarim2020 

 

Thank you very much for such a detailed breakdown on this process, it works perfectly and saved me a bunch of time trying to figured how to check if a folder was created under the root.

Hi @ekarim2020

 

I have doubt what is the syntex for creating multilevel sub folders for example you are creating 5 folders in that first one is Breakfast in side that folder i need to create two sub folders like "Coffee", "Tea", in that what is the syntex for array. Please advise.

 

Thanks

HI @jameela1 ,

 

Just add any subfolders to the array using the following format:

 

[
"Breakfast",

"Breakfast/Coffee",

"Breakfast/Coffee/Nestle",

"Breakfast/Tea",

"Brunch",
"Lunch",
"Teatime",
"Dinner"
]

 

Note that if you only had the following path in the array:

"Breakfast/Coffee/Nestle"

 

SharePoint would create Breasfast, Coffee and Nestle folders in one action.

 

So in theory you could just have:

[

"Breakfast/Coffee/Nestle",

"Breakfast/Tea",

"Brunch",
"Lunch",
"Teatime",
"Dinner"
]

 

But the first array example may be far more readable.

 

Ellis
____________________________________
If I have answered your question, please mark the post as Solved.
If you like my response, please give it a Thumbs Up.

Thanks @ekarim2020 This is working perfectly..Thanks lot!!!

 

Is there is any possibility to setup security for example folder "Breakfast" should be access by Peter or GroupMembers other should not permit. Please advise.

 

Thanks

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.    👉Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS   Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!   Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!       Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!   UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!   European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!     Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!     For more events, click the image below to visit the Microsoft Community Days website.      

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Users online (2,601)