cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Loop through sharepoint list and group items together by email, send email

I have a recurring flow that I want to run every Friday evening.  The flow does what is somewhat expected however it is sending 3 separate emails instead of grouping the three items together in one email.  I believe I need to use an array but am unfamiliar with this.  

 

So in my sharepoint I have a list that stores New and Lost beverage placements.  Every week I want to send an email to every buyer who either has a new or lost placements so they can adjust ordering needs accordingly.

 

For my first test run I added 6 items to the list, 3 for myself and 3 for another buyer.  The flow did send me the three items assigned to me and the three items assigned to the other buyer but it did so in 3 different emails.  How do I get all 3 of my assigned items (or even more) into one email?  Also i had to initialize my forecast of the item into a float variable as it was not showing up on the dynamic content side modal screen.  I noticed none of my "number" fields show up there either (ID, etc).

Screen Shot 2020-03-15 at 8.26.46 PM.pngScreen Shot 2020-03-15 at 8.27.01 PM.png

 

 

I have tried a few different ideas but nothing I try is working. 

 

This is my sharepoint.  Planner column stores the email.  I did have another sharepoint list that stored Supplier -> Planner attributes but I wasn't sure trying to normalizing everything in sharepoint was the right thing to do. 

 

Screen Shot 2020-03-15 at 8.37.38 PM.png

1 ACCEPTED SOLUTION

Accepted Solutions

Hi again

Now that we solve the issue with Filter Array, we are closer to a Happy Ending!

 

Let's talk about the new issue: I think the challenge now is to remove 'Apply to Each 2' and fix 'Create HTML table' Value inputs.

My suggestion is:

-Keep 'Apply to each 2' and its contents untouched

-Add a new 'Create HTML table 2' before 'Apply to each 2', assign as its input 'Filter array' output

-Now, when adding 'Header' 'Value' inputs to 'Create HTML table 2':

a) Use the same strings for Header as you have in your original 'Create HTML table'

b) Now you need to assign expressions as 'Value' inputs. Assuming the three columns are defined as 'single line of text' in your SP list the three expressions are:

item()?['PlacementStatus']

item()?['Title']

item()?['Forecast']

-Once 'Create HTML table 2' is completed, add 'Send an email' also before 'Apply to each 2'

-Finally remove 'Apply to each 2' and its content. But before doing it, and in order to doublecheck the expressions in 'Create HTML Table 2' are correct, please hover your mouse over original 'Create HTML table' 'Value' inputs. If my assumption is correct, you shall see the following:

items('Apply_to_each_2')?['PlacementStatus']

items('Apply_to_each_2')?['Title']

items('Apply_to_each_2')?['Forecast']

 

If so, remove 'Apply to each 2' save and reexecute your flow

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

View solution in original post

13 REPLIES 13
efialttes
Community Champion
Community Champion

Hi!

You need to consolidate your emails, right?

If so, you will find an example in this thread on how to do it:

https://powerusers.microsoft.com/t5/Building-Flows/Consolidated-email-based-on-date-in-excel/m-p/471...

 

The source date in my example is an Excel file, if you need assistance to adapt it to your SP list instead please let us know

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Anonymous
Not applicable

I want to send individual emails.  I tried an Apply to Each loop (for the planner) but I ended up sending roughly 30 emails to myself.  Each email was longer than the previous so that tells me my loop was wrong.  

 

I have about 15 different buyers and I want to send a list of all placements that were Modified in the last 7 days to only that specific buyer.  I do not want to send one massive email to all planners with all items listed.  

 

So in picture of my sharepoint list I want to send one email to myself with my 3 items and another email to the other buyer for their 3 items.  

 

I will check out your link when I get the chance.

 

Much thanks for replying

Anonymous
Not applicable

So i went through and followed the link you sent and set everything up but I never received an email and the outputs on actions are all empty.  Not sure what I messed up on.  Also I want to reference a few columns in my sharepoint list when emailing the buyers.  I want to send 'PlacementStatus', 'Title' and 'Forecast' in the body of the email.  

 

@efialttes I tried creating an HTML table and the headers show in the output but I get no values.  Also still no email even though the flow succeeded.  

 

Thank you for your help.

Hi @Anonymous,

 

You could use the Create HTML table action to mix the three items you filter out, then custom columns to set headers. After that put the output into the Email and send out:Annotation 2020-03-17 130161.png

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

@Anonymous
Can you share a screenshot of your current flow design?
Thanx!

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Anonymous
Not applicable

@efialttes I followed the link in the previous answer and substituted my own things where you had those expressions noted.  Even though my flow succeeds there is no output starting with the Filter Array action.  Below is the flow and at the very end is one that shows the output.

 

 

Screen Shot 2020-03-17 at 7.11.35 PM.png

Screen Shot 2020-03-17 at 7.11.47 PM.png

 

 

Here is output:

 

Screen Shot 2020-03-17 at 7.20.51 PM.png

Screen Shot 2020-03-17 at 7.21.01 PM.png

Screen Shot 2020-03-17 at 7.21.09 PM.pngScreen Shot 2020-03-17 at 7.21.19 PM.pngScreen Shot 2020-03-17 at 7.21.29 PM.pngScreen Shot 2020-03-17 at 7.21.35 PM.png

Hi!
I think the problem is with the 'Filter array' validation.
On its right side, please remove 'current item' dynamic content and use this expression instead:
items('Apply_to_each')?['Planner']

If this suggestion works, I guess deserves tons of 'Thumbs up', its 6.08 here and not yet had a shower hahaha

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Anonymous
Not applicable

@efialttes  Haha. of course.  So I changed it and tested and I now have values populating in the HTML Table.  However it is the very first item in the list repeating 3 times (which is the number of items assigned to my email).  I imagine it would repeat n times for n items assigned to my email.  The email body was also empty. So it never sent the email.  

 

Thanks for all your help.  I will work on this tonight and reach out tomorrow.

 

Here is the output:

 

In the table there should 384217, 384218, and 384219.  

 

Screen Shot 2020-03-17 at 8.16.27 PM.pngScreen Shot 2020-03-17 at 8.16.41 PM.png

 

 

Hi again

Now that we solve the issue with Filter Array, we are closer to a Happy Ending!

 

Let's talk about the new issue: I think the challenge now is to remove 'Apply to Each 2' and fix 'Create HTML table' Value inputs.

My suggestion is:

-Keep 'Apply to each 2' and its contents untouched

-Add a new 'Create HTML table 2' before 'Apply to each 2', assign as its input 'Filter array' output

-Now, when adding 'Header' 'Value' inputs to 'Create HTML table 2':

a) Use the same strings for Header as you have in your original 'Create HTML table'

b) Now you need to assign expressions as 'Value' inputs. Assuming the three columns are defined as 'single line of text' in your SP list the three expressions are:

item()?['PlacementStatus']

item()?['Title']

item()?['Forecast']

-Once 'Create HTML table 2' is completed, add 'Send an email' also before 'Apply to each 2'

-Finally remove 'Apply to each 2' and its content. But before doing it, and in order to doublecheck the expressions in 'Create HTML Table 2' are correct, please hover your mouse over original 'Create HTML table' 'Value' inputs. If my assumption is correct, you shall see the following:

items('Apply_to_each_2')?['PlacementStatus']

items('Apply_to_each_2')?['Title']

items('Apply_to_each_2')?['Forecast']

 

If so, remove 'Apply to each 2' save and reexecute your flow

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Hi again!

One final suggestion (I hope)... when adding the new 'Send an email' please make sure you assigned the following expression to 'To' input:

items('Apply_to_each')?['Planner']

 

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Anonymous
Not applicable

@efialttes Thank you so much.  If I could give 1000 kudos I would.  I do have another question though.  Where do you find the information on how to use the item()?[] / items()?[] expressions?  I would not have been able to solve this without your help.  Once again thank you!!

HURRAY!

IT WORKS!

 

Now, lets talk about item() and items(). And I must confess it is a very good question indeed, I haven't found any blog explaining how to use them.

 

First, let's clarify that Power Automate offers several action blocks that require an array as input and iterate through all its input array elements:

Apply to each, Filter array and Select.

According to the official documentation, item() "...when used inside a repeating action over an array, return the current item in the array during the action's current iteration. You can also get the values from that item's properties".

Also according to the official documentation, items() "...return the current item from each cycle in a for-each loop. Use this function inside the for-each loop".

 

So I think we will see it better with examples.

Let's assume we have a Filter Array. When defining Filter Array condition, the way to refer to 'Filter Array' input current iteration is by means of item(). The same applies to Select when defining its map table. So item() gives you context to currently running item in the loop.

 

'Apply to each' is a bit more complex. Why? Because inside an 'Apply to each' we can add another action block(s) that require an array as input and iterate through all its input array elements. So you can have another 'Apply to each' inside, you can have 'Filter array' inside, you can have 'Select' inside.

The ortodox way to refer to 'Apply to Each' input current iteration is by means of items('Name_of_the_action_block'). So if we call our 'Apply to each' as 'Apply to each 2', we shall use

items('Apply_to_each_2')

 

But sometimes we can also refer to 'Apply to Each' input current iteration by means of item() -which is faster to type-.

We shall not do it when we assign expressions to either another 'Apply to each' or a 'Filter array' or a 'Select' that were added inside our first 'Apply to each'.

 

Let's assume we have an array variable called Fruits. We assign as its value 4 elements: ['banana', 'apple', 'orange', 'lemon']

Let's assume we have a second array ariable called Desserts. We assign as its value 3 elements: ['cheesecake', 'icecream', 'orange']

Now imagine we add 'Apply to each X', assign variable 'Fruits' as its input. Inside 'Apply to each X':

-we add a Compose action block, assign as its value the expression: item()

-we add a second Compose action block, assign as its value the expression: items('Apply_to_each_X')

'Apply to each X' will iterate 4 times. In each iteration both Compose action blocks will display the same result: 'banana' in first iteration, 'apple' on second and so on.

 

Now inside the 'Apply to each X' we also add a Filter Array, assign variable 'Dessert' as its input.

-On its condition left side we add expresion: item()

-On its condition right side we add expression: items('Apply_to_each_X')

-Operator: equals

 

So 'Filter Array' will iterate 3 times per 'Apply to eah operation'. Inside 'Filter array', item() refers to 'Filter array' current iteration, and items('Apply_to_each_X') refers to 'Apply to each X' current iteration

 

Same would happen if we add a 'Select' inside 'Apply to each X'. Inside 'Select', item() refers to 'Select' current iteration, and items('Apply_to_each_X') refers to 'Apply to each X' current iteration.

same would happen if we add 'Apply to each Y' inside 'Apply to each X'. Inside 'Apply to each Y', both items('Apply_to_each_Y') and item() refer to 'Apply to each Y' current iteration, and items('Apply_to_each_X') refers to 'Apply to each X' current iteration.

 

In my examples, array elements were strings. But if array elements where objects instead, you can use item() and items() to get the values from current iteration's element (object) properties

 

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttes ; hello man, you save my day with your solution, many many thanks.

Helpful resources

Announcements

February 2024 Community Newsletter

Welcome to our February Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members. If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date in 2024 with all the news from across Microsoft Power Platform and beyond. Are you ready to "Leap" in to all we've got to share today?   COMMUNITY HIGHLIGHTS Check out the most active community members of the last month! These hardworking members post regularly, answer questions, kudos, and provide top solutions in their communities. We are so thankful for all your great work in January, and we can't wait to see who will be our most active members next month!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzWarrenBelzPstork1saudali_25LaurensMPstork1stephenrobertLucas001AARON_ClbendincpaytonSurendran_RANBNived_NambiarMariamPaulachanNikhil2JmanriqueriosANBJupyter123rodger-stmmbr1606Agniusstevesmith27mandelaPhineastrice602AnnaMoyalanOOlashynBCLS776grantjenkinsExpiscornovusJcookSpongYeAARON_CManishSolankiapangelesPstork1ManishSolankiSanju1Fubar   There was a lot of activity in the Community in February! Did you miss anything? Here are just a few of the announcements and updates we shared: Super User Season 1 is HereFebruary 2024 User Group Update: Welcoming New GroupsCelebrating a New Season of Super UsersCheck out the February 2024 Dynamics NewsletterAnnouncing Copilot Cookbook GallerySuper User of the Month D. PoggemannTuesday Tips: Getting Started in the Community The best way to not miss them is to make sure you're subscribed to your community's News & Announcements. Subscribe today and don't miss anything next month! Power Apps News, Power Automate News, Copilot Studio News, Power Pages News Copilot Cookbook for Power Apps The all-new Copilot Cookbook is now available in the #PowerApps Community - offering a wide array of best practices on how to use Microsoft Copilot to develop and create in Power Apps.   The #CopilotCookbook is your new go-to resource when you need inspiration (or when you're stuck!) and aren't sure how to best partner with Copilot. So, whether you're looking for the best prompts or just want to know about responsible AI use, you can visit the Copilot Cookbook for regular, high-quality content that you can rely on. Our team will be reviewing posts using the new "Copilot " label to ensure we highlight and amplify the most relevant and recent content, so you're assured of high-quality content every time you visit. If you share a post that gets featured in the curated gallery, you'll get a PM in the Community to let you know!   The curated gallery is now ready for you to experience, so click the image below and check out the all-new Copilot Cookbook for Power Apps today. We can't wait to see what you "cook" up! 👨🍳       Power Platform Dev Weekly Celebrate 200th Episode Congratulations to Danish Naglekar, Anwesha Sharma, Matt Beard, Mark Carrington Carl Cookson and the team, as they celebrated the 200th episode of Power Platform Dev Weekly in February!   Click the image below to check out this landmark episode, featuring content from the likes of Nati Turtledove, Matthew Devaney, Inogic, Mohamed Ashiq Faleel, Mike Hartley, Nishant Rana, James Yumnam, Carl Cookson, Yannick Reekmans, Deepesh Somani, and many more.       "Get Started With" Power Platform Shorts Series This month we launched our new 'Get Started With' series on YouTube - a selection of sweet snapshots to keep you in the loop with all the latest Copilot trends that you can try out through advice at Microsoft Learn. Click the image below to check out the entire playlist so far, and don't forget to subscribe to our YouTube channel for all the latest updates.     UPCOMING EVENTS Canadian Power Platform Summit - Vancouver - 16th March 2024 Check out the first ever Canadian Power Platform Summit, which takes place at Microsoft Vancouver office on Saturday 16th March 2024! Get ready to immerse yourself in the ultimate Power Platform experience at the #CPPS24. This event is tailored for makers, developers, students and tech enthusiasts eager to explore the depths of Power Platform technologies. With sessions ranging from beginner-friendly to advanced-intermediate, this event offers a diverse range of insights for attendees of all levels.   There's a great range of speakers, including the likes of Lisa Crosbie, Matthew Devaney, Ulrikke Akerbæk, Oleksandr Olashyn, Mark Smith, Jake Harvey, Manju Gurjar, Adam Tobias, Mats Necker, Natasza Kosakowska, Linn Zaw Win, Salim Adamon, Tomas Prokop, Maxim Nikonov, and many more.   Great work by Chris Piasecki, Éric Sauvé, Nick Doelman, Scott Durow, Victor Dantas and the team for putting this amazing event together. So, whether you're a seasoned pro or a rising star, click the image below to join the Microsoft Community in Canada to gain practical insights, discover real-world examples, and take away actionable skills to boost your expertise.   Business Applications Launch Event - Virtual - 10th April 2024 Registration is now open for the Microsoft Business Applications Launch event which kicks off at 9am PST on Wednesday 10th April 2024. Join Microsoft product leaders and engineers for an in-depth look at the latest news and AI capabilities in Power Platform and #Dynamics365, featuring the likes of Charles Lamanna, Sangya Singh, Julie Strauss, Donald Kossmann, Lori Lamkin, Georg Glantschnig, Mala Anand, Jeff Comstock, and Mike Morton.     Microsoft Fabric - Las Vegas - 26-28th March 2024 Exciting times ahead for the inaugural #MicrosoftFabric Community Conference on March 26-28 at the MGM Grand in Las Vegas! The conference will cover all the latest in analytics, AI, databases, and governance across 150+ sessions, with guest speakers including Arun Ulag, Amir Netz, Jessica Hawk, Eric Boyd, Kim Manis, Adam Saxton, Patrick LeBlanc, Bob Ward, Wangui McKelvey, Wee Hyong T., Justyna Lucznik, Priya Sathy, Mehrnoosh Sameki, Rachel Shepard, Karthik Ravindran, Jason Himmelstein, and many more.   On-site there will be a special Community Lounge, interactive learning labs, plus you'll be able to 'Ask the Experts' all your questions to get help from data, analytics, and AI specialists, including community members and the Fabric Customer Advisory Team. Click the image below to find out more about the ultimate learning event for Microsoft Fabric!   If you'd like to learn how the latest advances in AI and how #MicrosoftCopilot can help you streamline your processes, click the image below to register today!       LATEST COMMUNITY BLOG ARTICLES Power Apps Community Blog Power Automate Community Blog Copilot Studio Community Blog Power Pages Community Blog Check out 'Using the Community' for more helpful tips and information: Power Apps, Power Automate, Copilot Studio, Power Pages

Microsoft Power Up program unveils new curriculum and more

  New engaging and cohesive Power Up curriculum The Microsoft Power Up Program – a self-paced upskilling program, launched in 2022 to help non-technical professionals gain marketable skills using the Microsoft Power Platform – takes learning to the next level with a cohesive video-based curriculum that spans only seven weeks. Recognizing the demand for multimedia content, we partnered with Microsoft MVPs Rory Neary and Charlie Phipps to create engaging videos that not only simplify complex concepts, but also make the learner experience more dynamic and immersive. Each course follows the same business through real-world scenarios with demos and hands-on exercises for learners to gain skills and build solutions using Power Apps, Power Automate and Power BI. This structured approach not only enhances comprehension but also equips learners with tangible skills that can be applied immediately in their professional endeavors. By focusing on key areas, the program has been shortened from 12 weeks to seven, saving valuable time without sacrificing quality. Special thanks go to Microsoft Power Platform advocates, April Dunnam and Renee Noble who shared their expertise and to Power Up Program champs who contributed with feedback and reviews over the last 1+ year to make this significant improvement.   Easy access to a comprehensive Development Environment In addition, the program now offers simplified and instant access to a comprehensive development environment for Power Up Program learners to explore and experiment with the Power Platform in a sandbox environment, fostering creativity and innovation.     Introducing App-In-A-Day (AIAD) workshops for Power Up learners As an added incentive, participants of the Microsoft Power Up Program can now sign up for partner-led “App in a Day” virtual workshops. These workshops, conducted by industry experts and Microsoft partners, provide invaluable insights and practical guidance to supplement the core curriculum. By attending these workshops, learners can gain deeper insights into application development and further enhance their skills in leveraging the Power Platform for business solutions. A big shout to our partners that are supporting the Power Up Program and delivering these AIAD workshops: Advaiya, Almato AG, Braintree, Kaispe, Koenig Solutions, PowerApps 911, Pragmatic Works, Smart Consulting.   These enhancements introduced to the Microsoft Power Up Program mark a significant milestone in the ongoing quest to empower individuals with the skills needed to thrive in today’s digital economy. By embracing video-based learning, streamlining the curriculum, and offering personalized experiences, the program continues to set new standards of excellence in virtual education. Sign up today to start your Power Up learning journey (https://aka.ms/PowerUp/)   by Dimpi Gandhi, Principal PM Lead, Power Up ProgramRepost from Microsoft Power Platform Product Blog

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Our team will be reviewing posts using the new "Copilot" label to ensure we highlight and amplify the most relevant and recent content, so you're assured of high-quality content every time you visit. If you share a post that gets featured in the curated gallery, you'll get a PM in the Community to let you know!The curated gallery is ready for you to experience now, so visit the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community. We can't wait to see what you "cook" up!    

Tuesday Tips: Getting Started in the Community

TUESDAY TIPS is back!   This weekly series of posts is our way of sharing helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! The original run of Tuesday Tips was a highlight of last year, and these all-new Tips will hopefully prove to be just as informative as helpful. We will cover some basics about the Community, a few "insider tips" to make your experience even better, and sharing best practices gleaned from our most active community members and Super Users. Make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   THIS WEEK: I'm Brand New! What Do I Do? The number of new community members we have each week is pretty amazing, and we are so glad to welcome all of you to the Community! You may be wondering. "What do I do? Where do I get started? Will anyone be willing to help me? What I have a question? Help!"   Let's start with this: Welcome to the low-code revolution, and more importantly, welcome to the Power Platform Community! This is a great place to start. Whether you're busy with Power Apps, getting familiar with Power Automate, engaging Copilot Studio, or building in Power Pages, there are a few key places you should check out as you begin your journey: FORUMS: The forums are THE place to ask questions, look at questions asked by other Community members—and see answers and solutions from our Super Users and other helpful people in the Community. Power Apps ForumsPower Automate ForumsCopilot Studio ForumsPower Pages Forums   NEWS & ANNOUNCEMENTS: Our News & Announcements section highlights the newest and greatest updates in the Community, news from the product team, and so much more. It’s updated a few times each week and will also help you find ways to connect with what’s going on in the ever-growing world of Power Platform. Power Apps News & AnnouncementsPower Automate News & AnnouncementsCopilot Studio News & AnnouncementsPower Pages News & Announcements   GALLERIES: The Galleries section of the Community features tons of tips and tricks, features and benefits, and more—through videos created by our Super Users, product teams, and other helpful members of the Community. Power Apps GalleriesPower Automate Galleries Copilot Studio GalleriesPower Pages Galleries BLOGS: The community blogs section is full of handy step-by-step tips from members of the Community—and some of them include detailed answers to some of the questions most frequently asked questions, as well as how they solved a problem they faced. Power Apps Community BlogPower Automate Community BlogCopilot Studio Community BlogPower Pages Community Blog POWER UP PROGRAM: If you’d like to really take a huge step forward in your journey, we recommend checking out the Power Up Program, a Microsoft-sponsored initiative that trains new Power Platform users and has been a huge success since it launched a little over a year ago. There’s a waiting list, so definitely apply soon if you’re interested! Find out more here: Microsoft Power Up Program for career switchers.   There's so much more you'll discover in your Power Platform experience, and this Community is here for YOU! We are glad you've discovered us and can't wait to see where you grow! If you're new to the Community and just getting started, make sure to give this post a kudo and introduce yourself so we can welcome you!

Super User of the Month | Drew Poggemann

As part of a new monthly feature in the Community, we are excited to share that Drew Poggemann is our featured Super User for the month of February 2024. If you've been in the Community for a while, we're sure Drew's name is familiar to you, as he is one of our most active contributors--he's been a Super User for five consecutive seasons!   Since authoring his first reply 5 years ago to his 514th solution authored, Drew has helped countless Community members with his insights and expertise. In addition to being a Super User, Drew is also a User Group leader and a Microsoft MVP. His contributions to our Super User sessions and to the new SUIT program are always welcome--as well as his sense of humor and fun-loving way of sharing what he knows with others.   When Drew is not solving problems and authoring solutions, he's busy overseeing the Solution Architecture team at HBS, specializing in application architecture and business solution strategy--something he's been doing for over 30 years. We are grateful for Drew and the amazing way he has used his talent and skills to help so many others in the Community. If you are part of the SUIT program, you got to hear some great tips from Drew at the first SUIT session--and we know he still has much more to share!You can find him in the Community and on LinkedIn. Thank you for all you do, Drew!

Super Users 2024 Season One is Here!

   We are excited to announce the first season of our 2024 Super Users is here! Our kickoff to the new year welcomes many returning Super Users and several new faces, and it's always exciting to see the impact these incredible individuals will have on the Community in 2024! We are so grateful for the daily difference they make in the Community already and know they will keep staying engaged and excited for all that will happen this year.   How to Spot a Super User in the Community:Have you ever written a post or asked for help in the Community and had it answered by a user with the Super User icon next to their name? It means you have found the actual, real-life superheroes of the Power Platform Community! Super Users are our heroes because of the way they consistently make a difference in the Community. Our amazing Super Users help keep the Community a safe place by flagging spam and letting the Community Managers know about issues. They also make the Community a great place to find answers, because they are often the first to offer solutions and get clarity on questions. Finally, Super Users share valuable insights on ways to keep the Community growing, engaging, and looking ahead!We are honored to reveal the new badges for this season of Super Users! Congratulations to all the new and returning Super Users!     To better answer the question "What is a Super User?" please check out this article: Power Apps: What is A Super User? - Power Platform CommunityPower Automate: What is A Super User? - Power Platform Community Copilot Studio: What is A Super User? - Power Platform Community Power Pages: What is A Super User? - Power Platform Community

Users online (4,073)