cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Anonymous
Not applicable

Loop through sharepoint list and group items together by email, send email

I have a recurring flow that I want to run every Friday evening.  The flow does what is somewhat expected however it is sending 3 separate emails instead of grouping the three items together in one email.  I believe I need to use an array but am unfamiliar with this.  

 

So in my sharepoint I have a list that stores New and Lost beverage placements.  Every week I want to send an email to every buyer who either has a new or lost placements so they can adjust ordering needs accordingly.

 

For my first test run I added 6 items to the list, 3 for myself and 3 for another buyer.  The flow did send me the three items assigned to me and the three items assigned to the other buyer but it did so in 3 different emails.  How do I get all 3 of my assigned items (or even more) into one email?  Also i had to initialize my forecast of the item into a float variable as it was not showing up on the dynamic content side modal screen.  I noticed none of my "number" fields show up there either (ID, etc).

Screen Shot 2020-03-15 at 8.26.46 PM.pngScreen Shot 2020-03-15 at 8.27.01 PM.png

 

 

I have tried a few different ideas but nothing I try is working. 

 

This is my sharepoint.  Planner column stores the email.  I did have another sharepoint list that stored Supplier -> Planner attributes but I wasn't sure trying to normalizing everything in sharepoint was the right thing to do. 

 

Screen Shot 2020-03-15 at 8.37.38 PM.png

1 ACCEPTED SOLUTION

Accepted Solutions

Hi again

Now that we solve the issue with Filter Array, we are closer to a Happy Ending!

 

Let's talk about the new issue: I think the challenge now is to remove 'Apply to Each 2' and fix 'Create HTML table' Value inputs.

My suggestion is:

-Keep 'Apply to each 2' and its contents untouched

-Add a new 'Create HTML table 2' before 'Apply to each 2', assign as its input 'Filter array' output

-Now, when adding 'Header' 'Value' inputs to 'Create HTML table 2':

a) Use the same strings for Header as you have in your original 'Create HTML table'

b) Now you need to assign expressions as 'Value' inputs. Assuming the three columns are defined as 'single line of text' in your SP list the three expressions are:

item()?['PlacementStatus']

item()?['Title']

item()?['Forecast']

-Once 'Create HTML table 2' is completed, add 'Send an email' also before 'Apply to each 2'

-Finally remove 'Apply to each 2' and its content. But before doing it, and in order to doublecheck the expressions in 'Create HTML Table 2' are correct, please hover your mouse over original 'Create HTML table' 'Value' inputs. If my assumption is correct, you shall see the following:

items('Apply_to_each_2')?['PlacementStatus']

items('Apply_to_each_2')?['Title']

items('Apply_to_each_2')?['Forecast']

 

If so, remove 'Apply to each 2' save and reexecute your flow

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

View solution in original post

13 REPLIES 13
efialttes
Community Champion
Community Champion

Hi!

You need to consolidate your emails, right?

If so, you will find an example in this thread on how to do it:

https://powerusers.microsoft.com/t5/Building-Flows/Consolidated-email-based-on-date-in-excel/m-p/471...

 

The source date in my example is an Excel file, if you need assistance to adapt it to your SP list instead please let us know

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Anonymous
Not applicable

I want to send individual emails.  I tried an Apply to Each loop (for the planner) but I ended up sending roughly 30 emails to myself.  Each email was longer than the previous so that tells me my loop was wrong.  

 

I have about 15 different buyers and I want to send a list of all placements that were Modified in the last 7 days to only that specific buyer.  I do not want to send one massive email to all planners with all items listed.  

 

So in picture of my sharepoint list I want to send one email to myself with my 3 items and another email to the other buyer for their 3 items.  

 

I will check out your link when I get the chance.

 

Much thanks for replying

Anonymous
Not applicable

So i went through and followed the link you sent and set everything up but I never received an email and the outputs on actions are all empty.  Not sure what I messed up on.  Also I want to reference a few columns in my sharepoint list when emailing the buyers.  I want to send 'PlacementStatus', 'Title' and 'Forecast' in the body of the email.  

 

@efialttes I tried creating an HTML table and the headers show in the output but I get no values.  Also still no email even though the flow succeeded.  

 

Thank you for your help.

Hi @Anonymous,

 

You could use the Create HTML table action to mix the three items you filter out, then custom columns to set headers. After that put the output into the Email and send out:Annotation 2020-03-17 130161.png

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

@Anonymous
Can you share a screenshot of your current flow design?
Thanx!

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Anonymous
Not applicable

@efialttes I followed the link in the previous answer and substituted my own things where you had those expressions noted.  Even though my flow succeeds there is no output starting with the Filter Array action.  Below is the flow and at the very end is one that shows the output.

 

 

Screen Shot 2020-03-17 at 7.11.35 PM.png

Screen Shot 2020-03-17 at 7.11.47 PM.png

 

 

Here is output:

 

Screen Shot 2020-03-17 at 7.20.51 PM.png

Screen Shot 2020-03-17 at 7.21.01 PM.png

Screen Shot 2020-03-17 at 7.21.09 PM.pngScreen Shot 2020-03-17 at 7.21.19 PM.pngScreen Shot 2020-03-17 at 7.21.29 PM.pngScreen Shot 2020-03-17 at 7.21.35 PM.png

Hi!
I think the problem is with the 'Filter array' validation.
On its right side, please remove 'current item' dynamic content and use this expression instead:
items('Apply_to_each')?['Planner']

If this suggestion works, I guess deserves tons of 'Thumbs up', its 6.08 here and not yet had a shower hahaha

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Anonymous
Not applicable

@efialttes  Haha. of course.  So I changed it and tested and I now have values populating in the HTML Table.  However it is the very first item in the list repeating 3 times (which is the number of items assigned to my email).  I imagine it would repeat n times for n items assigned to my email.  The email body was also empty. So it never sent the email.  

 

Thanks for all your help.  I will work on this tonight and reach out tomorrow.

 

Here is the output:

 

In the table there should 384217, 384218, and 384219.  

 

Screen Shot 2020-03-17 at 8.16.27 PM.pngScreen Shot 2020-03-17 at 8.16.41 PM.png

 

 

Hi again

Now that we solve the issue with Filter Array, we are closer to a Happy Ending!

 

Let's talk about the new issue: I think the challenge now is to remove 'Apply to Each 2' and fix 'Create HTML table' Value inputs.

My suggestion is:

-Keep 'Apply to each 2' and its contents untouched

-Add a new 'Create HTML table 2' before 'Apply to each 2', assign as its input 'Filter array' output

-Now, when adding 'Header' 'Value' inputs to 'Create HTML table 2':

a) Use the same strings for Header as you have in your original 'Create HTML table'

b) Now you need to assign expressions as 'Value' inputs. Assuming the three columns are defined as 'single line of text' in your SP list the three expressions are:

item()?['PlacementStatus']

item()?['Title']

item()?['Forecast']

-Once 'Create HTML table 2' is completed, add 'Send an email' also before 'Apply to each 2'

-Finally remove 'Apply to each 2' and its content. But before doing it, and in order to doublecheck the expressions in 'Create HTML Table 2' are correct, please hover your mouse over original 'Create HTML table' 'Value' inputs. If my assumption is correct, you shall see the following:

items('Apply_to_each_2')?['PlacementStatus']

items('Apply_to_each_2')?['Title']

items('Apply_to_each_2')?['Forecast']

 

If so, remove 'Apply to each 2' save and reexecute your flow

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Hi again!

One final suggestion (I hope)... when adding the new 'Send an email' please make sure you assigned the following expression to 'To' input:

items('Apply_to_each')?['Planner']

 

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

Anonymous
Not applicable

@efialttes Thank you so much.  If I could give 1000 kudos I would.  I do have another question though.  Where do you find the information on how to use the item()?[] / items()?[] expressions?  I would not have been able to solve this without your help.  Once again thank you!!

HURRAY!

IT WORKS!

 

Now, lets talk about item() and items(). And I must confess it is a very good question indeed, I haven't found any blog explaining how to use them.

 

First, let's clarify that Power Automate offers several action blocks that require an array as input and iterate through all its input array elements:

Apply to each, Filter array and Select.

According to the official documentation, item() "...when used inside a repeating action over an array, return the current item in the array during the action's current iteration. You can also get the values from that item's properties".

Also according to the official documentation, items() "...return the current item from each cycle in a for-each loop. Use this function inside the for-each loop".

 

So I think we will see it better with examples.

Let's assume we have a Filter Array. When defining Filter Array condition, the way to refer to 'Filter Array' input current iteration is by means of item(). The same applies to Select when defining its map table. So item() gives you context to currently running item in the loop.

 

'Apply to each' is a bit more complex. Why? Because inside an 'Apply to each' we can add another action block(s) that require an array as input and iterate through all its input array elements. So you can have another 'Apply to each' inside, you can have 'Filter array' inside, you can have 'Select' inside.

The ortodox way to refer to 'Apply to Each' input current iteration is by means of items('Name_of_the_action_block'). So if we call our 'Apply to each' as 'Apply to each 2', we shall use

items('Apply_to_each_2')

 

But sometimes we can also refer to 'Apply to Each' input current iteration by means of item() -which is faster to type-.

We shall not do it when we assign expressions to either another 'Apply to each' or a 'Filter array' or a 'Select' that were added inside our first 'Apply to each'.

 

Let's assume we have an array variable called Fruits. We assign as its value 4 elements: ['banana', 'apple', 'orange', 'lemon']

Let's assume we have a second array ariable called Desserts. We assign as its value 3 elements: ['cheesecake', 'icecream', 'orange']

Now imagine we add 'Apply to each X', assign variable 'Fruits' as its input. Inside 'Apply to each X':

-we add a Compose action block, assign as its value the expression: item()

-we add a second Compose action block, assign as its value the expression: items('Apply_to_each_X')

'Apply to each X' will iterate 4 times. In each iteration both Compose action blocks will display the same result: 'banana' in first iteration, 'apple' on second and so on.

 

Now inside the 'Apply to each X' we also add a Filter Array, assign variable 'Dessert' as its input.

-On its condition left side we add expresion: item()

-On its condition right side we add expression: items('Apply_to_each_X')

-Operator: equals

 

So 'Filter Array' will iterate 3 times per 'Apply to eah operation'. Inside 'Filter array', item() refers to 'Filter array' current iteration, and items('Apply_to_each_X') refers to 'Apply to each X' current iteration

 

Same would happen if we add a 'Select' inside 'Apply to each X'. Inside 'Select', item() refers to 'Select' current iteration, and items('Apply_to_each_X') refers to 'Apply to each X' current iteration.

same would happen if we add 'Apply to each Y' inside 'Apply to each X'. Inside 'Apply to each Y', both items('Apply_to_each_Y') and item() refer to 'Apply to each Y' current iteration, and items('Apply_to_each_X') refers to 'Apply to each X' current iteration.

 

In my examples, array elements were strings. But if array elements where objects instead, you can use item() and items() to get the values from current iteration's element (object) properties

 

Hope this helps

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

@efialttes ; hello man, you save my day with your solution, many many thanks.

Helpful resources

Announcements

Celebrating the May Super User of the Month: Laurens Martens

  @LaurensM  is an exceptional contributor to the Power Platform Community. Super Users like Laurens inspire others through their example, encouragement, and active participation. We are excited to celebrated Laurens as our Super User of the Month for May 2024.   Consistent Engagement:  He consistently engages with the community by answering forum questions, sharing insights, and providing solutions. Laurens dedication helps other users find answers and overcome challenges.   Community Expertise: As a Super User, Laurens plays a crucial role in maintaining a knowledge sharing environment. Always ensuring a positive experience for everyone.   Leadership: He shares valuable insights on community growth, engagement, and future trends. Their contributions help shape the Power Platform Community.   Congratulations, Laurens Martens, for your outstanding work! Keep inspiring others and making a difference in the community!   Keep up the fantastic work!        

Check out the Copilot Studio Cookbook today!

We are excited to announce our new Copilot Cookbook Gallery in the Copilot Studio Community. We can't wait for you to share your expertise and your experience!    Join us for an amazing opportunity where you'll be one of the first to contribute to the Copilot Cookbook—your ultimate guide to mastering Microsoft Copilot. Whether you're seeking inspiration or grappling with a challenge while crafting apps, you probably already know that Copilot Cookbook is your reliable assistant, offering a wealth of tips and tricks at your fingertips--and we want you to add your expertise. What can you "cook" up?   Click this link to get started: https://aka.ms/CS_Copilot_Cookbook_Gallery   Don't miss out on this exclusive opportunity to be one of the first in the Community to share your app creation journey with Copilot. We'll be announcing a Cookbook Challenge very soon and want to make sure you one of the first "cooks" in the kitchen.   Don't miss your moment--start submitting in the Copilot Cookbook Gallery today!     Thank you,  Engagement Team

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Check Out the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community.  We can't wait to see what you "cook" up!    

Welcome to the Power Automate Community

You are now a part of a fast-growing vibrant group of peers and industry experts who are here to network, share knowledge, and even have a little fun.   Now that you are a member, you can enjoy the following resources:   Welcome to the Community   News & Announcements: The is your place to get all the latest news around community events and announcements. This is where we share with the community what is going on and how to participate.  Be sure to subscribe to this board and not miss an announcement.   Get Help with Power Automate Forums: If you're looking for support with any part of Power Automate, our forums are the place to go. From General Power Automate forums to Using Connectors, Building Flows and Using Flows.  You will find thousands of technical professionals, and Super Users with years of experience who are ready and eager to answer your questions. You now have the ability to post, reply and give "kudos" on the Power Automate community forums. Make sure you conduct a quick search before creating a new post because your question may have already been asked and answered. Galleries: The galleries are full of content and can assist you with information on creating a flow in our Webinars and Video Gallery, and the ability to share the flows you have created in the Power Automate Cookbook.  Stay connected with the Community Connections & How-To Videos from the Microsoft Community Team. Check out the awesome content being shared there today.   Power Automate Community Blog: Over the years, more than 700 Power Automate Community Blog articles have been written and published by our thriving community. Our community members have learned some excellent tips and have keen insights on the future of process automation. In the Power Automate Community Blog, you can read the latest Power Automate-related posts from our community blog authors around the world. Let us know if you'd like to become an author and contribute your own writing — everything Power Automate-related is welcome.   Community Support: Check out and learn more about Using the Community for tips & tricks. Let us know in the Community Feedback  board if you have any questions or comments about your community experience. Again, we are so excited to welcome you to the Microsoft Power Automate community family. Whether you are brand new to the world of process automation or you are a seasoned Power Automate veteran - our goal is to shape the community to be your 'go to' for support, networking, education, inspiration and encouragement as we enjoy this adventure together.     Power Automate Community Team

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Users online (5,892)