cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
knandez05
Helper IV
Helper IV

Multi Level Condition Approval Error

Hello! @Expiscornovus you helped earlier with this flow. I am stuck yet again with a multi level approval flow I am working on.

 

I have a 3 level parallel branch approval that go to 3 different groups in my organization for approval based on the criteria. I'm having issues with the third option below (#3):

 

1. If less than $25k - route directly to Accounting (this condition flow works fine)

2. If greater than $25k - route to the Executive VP then based on approval route to Accounting (this condition flow works fine - but maybe I need to modify it to say "Greater than $25k, less than $100k?")

3. If greater than $100k - route to the Executive COO & VP; then based on approval route to Accounting (having issues with this condition flow. The approval of both the COO and VP are triggering; however, when approved it is not routing to Accounting)

 

I'm sure that I don't have the flow correctly set up. As of right now, this 3rd option should only trigger when the Project Budget Amount is greater or equal to $100k. It should then route to both the Executive VP and the Executive COO. I currently have these two flows in separate conditions. The approval emails trigger, but once approved it should route to Accounting and I am getting an error. Possibly because I cannot have two condition flows run at the same time and routed in the same way (???) 

 

Ideally, I need 3 condition flows for my Project Budget Amount:

1. Less than $25k - send approval to Accounting

2. Greater or equal to $25k - send approval to Executive VP - once approved, send to Accounting (how do I prevent this condition from triggering when greater than $100k?)

3. Greater or equal to $100k - send approval to Executive VP and COO - once approved, send to Accounting (how do I add the Executive VP to this condition?)

 

The approvals are a linked...meaning, I want to capture the Responses for each approval and they are updated on the SharePoint list. 

 

Please help!! Not sure what is the best way to account for this. 

 

3 parallel branch conditions

Parallel Branch Conditions.jpg

 

Greater than $25k Exec VP condition approval routing

25k approval routing.jpg

 

25k Exec VP approval leads to accounting approval routing

25k accounting switch case.jpg

 

25k accounting approval.jpg

 

 

Greater than $100k Exec COO condition approval routing (pretty much same setup as 25k Exec VP) 

100k approval.jpg

 

$100k Exec COO approval accounting routing

 

100k accounting routing.jpg

 

Error I am getting when the above flow runs. Project Budget Amount was greater than 100k. Both the 25k & 100k condition flows ran. The approvals triggered fine. When it got to the accounting routing for each, the flow failed. Think it might be that I cannot have the same accounting routing run simultaneously under two separate conditions. What is the best way to get this to work?

 

 

BadRequest. The request failed. Error code: 'InvalidApprovalCreateRequestAssignedToMissing'. Error Message: 'Required field 'assignedTo' is missing or empty.'.

 

 

 

25k accounting routing fail

25k accounting error.jpg

 

100k accounting routing fail

100k accounting error.jpg

34 REPLIES 34

@annajhaveri So in this example I am trying to process a request that is a New Project ID which is tied to 'Project Budget Amount.' The 'Budget Increase Amount' is a number amount (XXXXX.XX) tied to the Increase Budget to Existing Project ID option which was not selected. It's null in this case. That's why I think I'm getting the error. 

annajhaveri
Most Valuable Professional
Most Valuable Professional

@knandez05  Use following expression, this will handle null value, if the value is null the variable will be assigned zero otherwise the value from column will be assigned to variable, replace Percent, with your column name.

@{if(empty(outputs('Get_item')?['body/Percent']), 0, int(outputs('Get_item')?['body/Percent']))}

 

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.

@annajhaveri It doesn't seem to be taking the expression. I tried using 'BudgetIncreastAmt' in place of the column name and it still isn't working. 

@{if(empty(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1]), 0, int(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1]))}

 variable expression error.jpg

annajhaveri
Most Valuable Professional
Most Valuable Professional

@knandez05 in your expression a quote ( ' ) is missing after 'body/rc5fa423dceaf456393218ec3e3796cf1]. Please use below expression

if(empty(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1']), 0, int(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1']))
Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
knandez05
Helper IV
Helper IV

Sorry for the oversight and thank you @annajhaveri. I used 'Get_reponse_details' instead of 'Get_items' and it worked.

 

But now is it not processing my Conditions. I swear if its not one thing its the other. I appreciate all of your help with this!

 

When I ran the test for New Project ID at $50k, it didn't process the Budget Increase variable which was good. 

variables run process.jpg

 

But then my $50k condition it should have processed thru came back as 'false.'

Condition $50k false.jpg

 

and(greaterOrEquals(variables('Project Budget Amount'),25000),less(variables('Project Budget Amount'),100000))

Condition $25k expression.jpg

annajhaveri
Most Valuable Professional
Most Valuable Professional

@knandez05  can you export the flow and provide the zip file, from screenshot the flow looks correct, but if i see the entire flow, it would give me more idea, of where it is going wrong.

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
knandez05
Helper IV
Helper IV

@annajhaveri Thank you for all of your help & patience. It seems to be working now. I ran a full test on all 3 conditions for both request types and had no issues. 

knandez05
Helper IV
Helper IV

Hi @annajhaveri. I was wondering if I can trouble you with one last thing....I've been getting a duplicate email at the end of my flow. The first level approval email triggers when I complete the last step in my flow, the accounting approval. I cannot seem to figure out why...I am not getting an error. It would just cause confusion. How can I download a zip file to send to you for review? The file seems too large to include in the code section or even in a photo screenshot (its about 20 pages). Please advise. Thank you again in advance.

annajhaveri
Most Valuable Professional
Most Valuable Professional

@knandez05  you can download the flow by using Export as shown in below screenshot, then upload zip to onedrive and share the link via message here.

 

annajhaveri_0-1614871423165.png

 

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.

One drive won't work. What other option do I have?

annajhaveri
Most Valuable Professional
Most Valuable Professional

dropbox?

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
knandez05
Helper IV
Helper IV

Hello @annajhaveri 

 

Here is the dropbox link to my workflow: https://www.dropbox.com/s/i22v2wmt159ilxz/DeveloperProjectBudgetRequestWorkflow_20210319174917.zip?d...

 

The most recent error has been with the Initialize Variable for Project Budget Amount and/or the Budget Increase Amount or the Set Variable for those respectively. I had the flow working with no issues but once we went into Beta test a user entered $95,227.97 instead of 95227.97 in the Project Number field and this broke the workflow and I cannot seem to fix it.

 

I would love to see if it is possible to enter $95,227.97 on the form and have it translate into the Approvals email as so. 

 

Initialize variable Project Budget Amt error

initialize variable proj budg amt.jpg

 

Initialize variable Budget Increase Amt error

Budget Increase Amt error.jpg

 

Set variable for Project Budget Amt

Set Variable Project Budget Amount.jpg

 

Here is how it was setup previously in the same way and it was working. 

Previous Proj Budget Amt succussful.jpg

 

 

Project Budget Amount Integer.jpg

 

Below is the form where the user inputs the Project Budget Amt. I've only been able to get it to work by not including $ or commas.

 

As in the case with the error above, the user entered the amount with $ and Commas and the process broke. I have not been able to repair it even when submitting it the correct way below. But having them include $ and commas will better assist in the process of submitting requests and so that the Approval emails are better to understand. 

form.jpg

 

The approval emails are better understood when the $ and commas are in place. 

approval email.jpg

 

Any help is much appreciated as always. 

annajhaveri
Most Valuable Professional
Most Valuable Professional

@knandez05  to support the value $95,227.97, you need to define the variable type as Float

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.

Thank you @annajhaveri. How does that affect/change the expression I currently have for the Set Variable for both Project Budget Amount and Budget Increase Amount?

 

Project Budget Amt & Increase Budget Amt Initialize & Set Variables.jpg

 

Set variable - Project Budget Amt

int(outputs('Get_response_details')?['body/rcbeb9bcfb56546c485ae6b7f9421234c'])

 

Set variable - Budget Increase Amt

if(empty(outputs('Get_response_details')?['body/rc5fa423dceaf456393218ec3e3796cf1']),0,int(outputs('Get_response_details')?['body/rc5fa423dceaf456393218ec3e3796cf1']))

 

annajhaveri
Most Valuable Professional
Most Valuable Professional

@knandez05  in the expressions wherever you are using int, you need to change it float

Regards,
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.    👉Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS   Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!   Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!       Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!   UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!   European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!     Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!     For more events, click the image below to visit the Microsoft Community Days website.      

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Users online (3,081)