Hello! @Expiscornovus you helped earlier with this flow. I am stuck yet again with a multi level approval flow I am working on.
I have a 3 level parallel branch approval that go to 3 different groups in my organization for approval based on the criteria. I'm having issues with the third option below (#3):
1. If less than $25k - route directly to Accounting (this condition flow works fine)
2. If greater than $25k - route to the Executive VP then based on approval route to Accounting (this condition flow works fine - but maybe I need to modify it to say "Greater than $25k, less than $100k?")
3. If greater than $100k - route to the Executive COO & VP; then based on approval route to Accounting (having issues with this condition flow. The approval of both the COO and VP are triggering; however, when approved it is not routing to Accounting)
I'm sure that I don't have the flow correctly set up. As of right now, this 3rd option should only trigger when the Project Budget Amount is greater or equal to $100k. It should then route to both the Executive VP and the Executive COO. I currently have these two flows in separate conditions. The approval emails trigger, but once approved it should route to Accounting and I am getting an error. Possibly because I cannot have two condition flows run at the same time and routed in the same way (???)
Ideally, I need 3 condition flows for my Project Budget Amount:
1. Less than $25k - send approval to Accounting
2. Greater or equal to $25k - send approval to Executive VP - once approved, send to Accounting (how do I prevent this condition from triggering when greater than $100k?)
3. Greater or equal to $100k - send approval to Executive VP and COO - once approved, send to Accounting (how do I add the Executive VP to this condition?)
The approvals are a linked...meaning, I want to capture the Responses for each approval and they are updated on the SharePoint list.
Please help!! Not sure what is the best way to account for this.
3 parallel branch conditions
Greater than $25k Exec VP condition approval routing
25k Exec VP approval leads to accounting approval routing
Greater than $100k Exec COO condition approval routing (pretty much same setup as 25k Exec VP)
$100k Exec COO approval accounting routing
Error I am getting when the above flow runs. Project Budget Amount was greater than 100k. Both the 25k & 100k condition flows ran. The approvals triggered fine. When it got to the accounting routing for each, the flow failed. Think it might be that I cannot have the same accounting routing run simultaneously under two separate conditions. What is the best way to get this to work?
BadRequest. The request failed. Error code: 'InvalidApprovalCreateRequestAssignedToMissing'. Error Message: 'Required field 'assignedTo' is missing or empty.'.
25k accounting routing fail
100k accounting routing fail
Solved! Go to Solution.
@annajhaveri So in this example I am trying to process a request that is a New Project ID which is tied to 'Project Budget Amount.' The 'Budget Increase Amount' is a number amount (XXXXX.XX) tied to the Increase Budget to Existing Project ID option which was not selected. It's null in this case. That's why I think I'm getting the error.
@knandez05 Use following expression, this will handle null value, if the value is null the variable will be assigned zero otherwise the value from column will be assigned to variable, replace Percent, with your column name.
@{if(empty(outputs('Get_item')?['body/Percent']), 0, int(outputs('Get_item')?['body/Percent']))}
@annajhaveri It doesn't seem to be taking the expression. I tried using 'BudgetIncreastAmt' in place of the column name and it still isn't working.
@{if(empty(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1]), 0, int(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1]))}
@knandez05 in your expression a quote ( ' ) is missing after 'body/rc5fa423dceaf456393218ec3e3796cf1]. Please use below expression
if(empty(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1']), 0, int(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1']))
Sorry for the oversight and thank you @annajhaveri. I used 'Get_reponse_details' instead of 'Get_items' and it worked.
But now is it not processing my Conditions. I swear if its not one thing its the other. I appreciate all of your help with this!
When I ran the test for New Project ID at $50k, it didn't process the Budget Increase variable which was good.
But then my $50k condition it should have processed thru came back as 'false.'
and(greaterOrEquals(variables('Project Budget Amount'),25000),less(variables('Project Budget Amount'),100000))
@knandez05 can you export the flow and provide the zip file, from screenshot the flow looks correct, but if i see the entire flow, it would give me more idea, of where it is going wrong.
@annajhaveri Thank you for all of your help & patience. It seems to be working now. I ran a full test on all 3 conditions for both request types and had no issues.
Hi @annajhaveri. I was wondering if I can trouble you with one last thing....I've been getting a duplicate email at the end of my flow. The first level approval email triggers when I complete the last step in my flow, the accounting approval. I cannot seem to figure out why...I am not getting an error. It would just cause confusion. How can I download a zip file to send to you for review? The file seems too large to include in the code section or even in a photo screenshot (its about 20 pages). Please advise. Thank you again in advance.
@knandez05 you can download the flow by using Export as shown in below screenshot, then upload zip to onedrive and share the link via message here.
One drive won't work. What other option do I have?
dropbox?
Hello @annajhaveri
Here is the dropbox link to my workflow: https://www.dropbox.com/s/i22v2wmt159ilxz/DeveloperProjectBudgetRequestWorkflow_20210319174917.zip?d...
The most recent error has been with the Initialize Variable for Project Budget Amount and/or the Budget Increase Amount or the Set Variable for those respectively. I had the flow working with no issues but once we went into Beta test a user entered $95,227.97 instead of 95227.97 in the Project Number field and this broke the workflow and I cannot seem to fix it.
I would love to see if it is possible to enter $95,227.97 on the form and have it translate into the Approvals email as so.
Initialize variable Project Budget Amt error
Initialize variable Budget Increase Amt error
Set variable for Project Budget Amt
Here is how it was setup previously in the same way and it was working.
Below is the form where the user inputs the Project Budget Amt. I've only been able to get it to work by not including $ or commas.
As in the case with the error above, the user entered the amount with $ and Commas and the process broke. I have not been able to repair it even when submitting it the correct way below. But having them include $ and commas will better assist in the process of submitting requests and so that the Approval emails are better to understand.
The approval emails are better understood when the $ and commas are in place.
Any help is much appreciated as always.
@knandez05 to support the value $95,227.97, you need to define the variable type as Float
Thank you @annajhaveri. How does that affect/change the expression I currently have for the Set Variable for both Project Budget Amount and Budget Increase Amount?
Set variable - Project Budget Amt
int(outputs('Get_response_details')?['body/rcbeb9bcfb56546c485ae6b7f9421234c'])
Set variable - Budget Increase Amt
if(empty(outputs('Get_response_details')?['body/rc5fa423dceaf456393218ec3e3796cf1']),0,int(outputs('Get_response_details')?['body/rc5fa423dceaf456393218ec3e3796cf1']))
@knandez05 in the expressions wherever you are using int, you need to change it float
Welcome to our November Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members. If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across the Power Platform and beyond. This month's highlights:- - Our most active community members- Microsoft Power Up Program- Microsoft Community Days website - The latest blogs and more COMMUNITY HIGHLIGHTS Check out the most active community members of the last month. These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, just get active! FLMikePstork1Nived_NambiarWarrenBelzSprongYeManishSolankiLaurensMwskinnermlcAgniusExpiscornovuscreativeopinion KatieAUinzil2kHaressh2728hafizsultan242douicmccaughanwoLucas001domliu Power Up Program Click the image below to discover more about the amazing Microsoft Power Up Program, as Reem Omar, Abbas Godhrawala, Chahine Atallah, Ruby Ruiz Brown, Juan Francisco Sánchez Enciso, Joscelyne Andrade Arévalo, Eric G. and Paulina Pałczyńska share how non-tech professionals can successfully advance into a new career path using Microsoft #PowerPlatform. To find out more about this amazing initiative, click here to apply for the program and reboot your journey into low-code app development today! Community Days - Event Website Have you checked out the Community Days website yet? Dedicated to the volunteer community organizers around the world, Community Days is the perfect place to find an event near you or add an event for wider exposure. Many thanks to Thomas Daly, Sharon Weaver, Sedat Tum, Jonathan Weaver, Manpreet Singh, David Leveille, Jason Rivera, Mike Maadarani, Rob Windsor and the team for all their hard work. Anyone can host a Community Day on any topic relevant to our industry, just click the image below to find out more. EVENT NEWS Power Platform French Summit - Paris/Virtual - 6-7th Dec It's not long now until the Power Platform French Summit, which takes place both virtually and in-person at the Microsoft France conference center in Paris on 6-7th December 2023. If you can't make it in-person, all sessions will also be broadcast on virtual networks for better distribution and accessibility. There's a fantastic array of speakers, including Jérémy LAPLAINE, Amira Beldjilali, Rémi Chambard, Erika Beaumier, Makenson Frena, Assia Boutera, Elliott Pierret, Clothilde Facon, Gilles Pommier, Marie Aubert, Antoine Herbosa, Chloé Moreau, Raphaël Senis, Rym Ben Hamida, Loïc Cimon, Joséphine Salafia, David Zoonekyndt, Aïcha Charpentier, Henry Jammes, Milene Rochard, Mehdi EL YASSIR, and many more. Click the image below for more information. LATEST COMMUNITY BLOG ARTICLES Power Apps Community Blog Power Automate Community Blog Copilot Community Blog Power Pages Community Blog
This is the TENTH post in our ongoing series dedicated to helping the amazing members of our community--both new members and seasoned veterans--learn and grow in how to best engage in the community! Each Tuesday, we feature new content that will help you best understand the community--from ranking and badges to profile avatars, from Super Users to blogging in the community. Our hope is that this information will help each of our community members grow in their experience with Power Platform, with the community, and with each other! This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start. Community Support is part of every one of our communities, accessible to all our community members. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Community Accounts & Registration is the go-to source for any and all information related to your account here in the community. It's full of great knowledge base articles that will help you manage your community account and know what steps to take if you wish to close your account. ● Power Apps ● Power Automate ● Power Pages, ● Copilot Studio Using the Community is your source for assistance with everything from Community User Groups to FAQ's and more. If you want to know what kudos are, how badges work, how to level up your User Group or something else, you will probably find the answers here. ● Power Apps ● Power Automate ● Power Pages ● Copilot Studio Community Feedback is where you can share opportunities, concerns, or get information from the Community Engagement team. It's your best place to post a question about an issue you're having in the community, a general question you need answered. Whatever it is, visit Community Feedback to get the answers you need right away. Our team is honored to partner with you and can't wait to help you! ● Power Apps ● Power Automate ● Power Pages ● Copilot Studio
What an amazing event we had this year, as Microsoft showcased the latest advancements in how AI has the potential to reshape how customers, partners and developers strategize the future of work. Check out below some of our handpicked videos and Ignite announcements to see how Microsoft is driving real change for users and businesses across the globe. Video Highlights Click the image below to check out a selection of Ignite 2023 videos, including the "Microsoft Cloud in the era of AI" keynote from Scott Guthrie, Charles Lamanna, Arun Ulag, Sarah Bird, Rani Borkar, Eric Boyd, Erin Chapple, Ali Ghodsi, and Seth Juarez. There's also a great breakdown of the amazing Microsoft Copilot Studio with Omar Aftab, Gary Pretty, and Kendra Springer, plus exciting sessions from Rajesh Jha, Jared Spataro, Ryan Jones, Zohar Raz, and many more. Blog Announcements Microsoft Copilot presents an opportunity to reimagine the way we work—turning natural language into the most powerful productivity tool on the planet. With AI, organizations can unearth value in data across productivity tools like business applications and Microsoft 365. Click the link below to find out more. Check out the latest features in Microsoft Power Apps that will help developers create AI-infused apps faster, give administrators more control over managing thousands of Microsoft Power Platform makers at scale, and deliver better experiences to users around the world. Click the image below to find out more. Click below to discover new ways to orchestrate business processes across your organization with Copilot in Power Automate. With its user-friendly interface that offers hundreds of prebuilt drag-and-drop actions, more customers have been able to benefit from the power of automation. Discover how Microsoft Power Platform and Microsoft Dataverse are activating the strength of your enterprise data using AI, the announcement of “plugins for Microsoft Copilot for Microsoft 365”, plus two new Power Apps creator experiences using Excel and natural language. Click below to find out more about the general availability of Microsoft Fabric and the public preview of Copilot in Microsoft Fabric. With the launch of these next-generation analytics tools, you can empower your data teams to easily scale the demand on your growing business. And for the rest of all the good stuff, click the link below to visit the Microsoft Ignite 2023 "Book of News", with over ONE HUNDRED announcements across infrastructure, data, security, new tools, AI, and everything else in-between!
This is the ninth post in our series dedicated to helping the amazing members of our community--both new members and seasoned veterans--learn and grow in how to best engage in the community! Each Tuesday, we feature new content that will help you best understand the community--from ranking and badges to profile avatars, from Super Users to blogging in the community. Our hope is that this information will help each of our community members grow in their experience with Power Platform, with the community, and with each other! Today's Tip: All About the Galleries Have you checked out the library of content in our galleries? Whether you're looking for the latest info on an upcoming event, a helpful webinar, or tips and tricks from some of our most experienced community members, our galleries are full of the latest and greatest video content for the Power Platform communities. There are several different galleries in each community, but we recommend checking these out first: Community Connections & How-To Videos Hosted by members of the Power Platform Community Engagement Team and featuring community members from around the world, these helpful videos are a great way to "kick the tires" of Power Platform and find out more about your fellow community members! Check them out in Power Apps, Power Automate, Power Pages, and Copilot Studio! Webinars & Video Gallery Each community has its own unique webinars and videos highlighting some of the great work being done across the Power Platform. Watch tutorials and demos by Microsoft staff, partners, and community gurus! Check them out: Power Apps Webinars & Video Gallery Power Automate Webinars & Video Gallery Power Pages Webinars & Video Gallery Copilot Studio Webinars & Video Gallery Events Whether it's the excitement of the Microsoft Power Platform Conference, a local event near you, or one of the many other in-person and virtual connection opportunities around the world, this is the place to find out more about all the Power Platform-centered events. Power Apps Events Power Automate Events Power Pages Events Copilot Studio Events Unique Galleries to Each Community Because each area of Power Platform has its own unique features and benefits, there are areas of the galleries dedicated specifically to videos about that product. Whether it's Power Apps samples from the community or the Power Automate Cookbook highlighting unique flows, the Bot Sharing Gallery in Copilot Studio or Front-End Code Samples in Power Pages, there's a gallery for you! Check out each community's gallery today! Power Apps Gallery Power Automate Gallery Power Pages Gallery Copilot Studio Gallery
In the bustling world of technology, two dynamic leaders, Geetha Sivasailam and Ben McMann, have been at the forefront, steering the ship of the Dallas Fort Worth Power Platform User Group since its inception in February 2019. As Practice Lead (Power Platform | Fusion Dev) at Lantern, Geetha brings a wealth of consulting experience, while Ben, a key member of the Studio Leadership team at Lantern, specializes in crafting strategies that leverage Microsoft digital technologies to transform business models. Empowering Through Community Leadership Geetha and Ben's journey as user group leaders began with a simple yet powerful goal: to create a space where individuals across the DFW area could connect, grow their skills, and add value to their businesses through the Power Platform. The platform, known for its versatility, allows users to achieve more with less code and foster creativity. The Power of Community Impact Reflecting on their experiences, Geetha and Ben emphasize the profound impact that community engagement has had on both their professional and personal lives. The Power Platform community, they note, is a wellspring of resources and opportunities, fostering continuous learning, skill enhancement, and networking with industry experts and peers. Favorite Moments and Words of Wisdom The duo's favorite aspect of leading the user group lies in witnessing the transformative projects and innovations community members create with the Power Platform. Their advice to aspiring user group leaders? "Encourage diverse perspectives, maintain an open space for idea-sharing, stay curious, and, most importantly, have fun building a vibrant community." Building Bridges, Breaking Barriers Geetha and Ben encourage others to step into the realm of user group leadership, citing the rewarding experience of creating and nurturing a community of like-minded individuals. They highlight the chance to influence, impact, and positively guide others, fostering connections that extend beyond mere technology discussions. Joining a User Group: A Gateway to Growth The leaders stress the importance of joining a user group, emphasizing exposure to diverse perspectives, solutions, and career growth opportunities within the Power Platform community. "Being part of such a group provides a supportive environment for seeking advice, sharing experiences, and navigating challenges." A Year of Milestones Looking back at the past year, Geetha and Ben express pride in the group's growth and global participation. They recount the enriching experience of meeting members in person at the Microsoft Power Platform conference, showcasing the diverse range of perspectives and guest speakers that enriched the community's overall experience. Continuous Learning on the Leadership Journey As user group leaders, Geetha and Ben recognize the continuous learning curve, blending interpersonal skills, adaptability, and dedication to foster a vibrant community. They highlight the importance of patience, persistence, and flexibility in achieving group goals, noting the significance of listening to the needs and suggestions of group members.They invite all tech enthusiasts to join the Dallas Fort Worth Power Platform User Group, a thriving hub where the power of community propels individuals to new heights in the dynamic realm of technology.
Are you attending Microsoft Ignite in Seattle this week? If so, we'd love to see you at the Community Lounge! Hosted by members of our Community team, it's a great place to connect, meet some Microsoft executives, and get a sticker or two. And if you're an MVP there are some special opportunities to meet up! The Community Lounge is more than just a space—it's a hub of activity, collaboration, and camaraderie. So, dive in, explore, and make the most of your Microsoft Ignite experience by immersing yourself in the vibrant and dynamic community that awaits you.Find out the schedule and all the details here: Community Lounge at Ignite! See you at #MSIgnite!
User | Count |
---|---|
65 | |
56 | |
31 | |
25 | |
17 |
User | Count |
---|---|
109 | |
72 | |
50 | |
47 | |
42 |