Showing results for 
Search instead for 
Did you mean: 
Helper III
Helper III

Multi Level Condition Approval Error

Hello! @Expiscornovus you helped earlier with this flow. I am stuck yet again with a multi level approval flow I am working on.


I have a 3 level parallel branch approval that go to 3 different groups in my organization for approval based on the criteria. I'm having issues with the third option below (#3):


1. If less than $25k - route directly to Accounting (this condition flow works fine)

2. If greater than $25k - route to the Executive VP then based on approval route to Accounting (this condition flow works fine - but maybe I need to modify it to say "Greater than $25k, less than $100k?")

3. If greater than $100k - route to the Executive COO & VP; then based on approval route to Accounting (having issues with this condition flow. The approval of both the COO and VP are triggering; however, when approved it is not routing to Accounting)


I'm sure that I don't have the flow correctly set up. As of right now, this 3rd option should only trigger when the Project Budget Amount is greater or equal to $100k. It should then route to both the Executive VP and the Executive COO. I currently have these two flows in separate conditions. The approval emails trigger, but once approved it should route to Accounting and I am getting an error. Possibly because I cannot have two condition flows run at the same time and routed in the same way (???) 


Ideally, I need 3 condition flows for my Project Budget Amount:

1. Less than $25k - send approval to Accounting

2. Greater or equal to $25k - send approval to Executive VP - once approved, send to Accounting (how do I prevent this condition from triggering when greater than $100k?)

3. Greater or equal to $100k - send approval to Executive VP and COO - once approved, send to Accounting (how do I add the Executive VP to this condition?)


The approvals are a linked...meaning, I want to capture the Responses for each approval and they are updated on the SharePoint list. 


Please help!! Not sure what is the best way to account for this. 


3 parallel branch conditions

Parallel Branch Conditions.jpg


Greater than $25k Exec VP condition approval routing

25k approval routing.jpg


25k Exec VP approval leads to accounting approval routing

25k accounting switch case.jpg


25k accounting approval.jpg



Greater than $100k Exec COO condition approval routing (pretty much same setup as 25k Exec VP) 

100k approval.jpg


$100k Exec COO approval accounting routing


100k accounting routing.jpg


Error I am getting when the above flow runs. Project Budget Amount was greater than 100k. Both the 25k & 100k condition flows ran. The approvals triggered fine. When it got to the accounting routing for each, the flow failed. Think it might be that I cannot have the same accounting routing run simultaneously under two separate conditions. What is the best way to get this to work?



BadRequest. The request failed. Error code: 'InvalidApprovalCreateRequestAssignedToMissing'. Error Message: 'Required field 'assignedTo' is missing or empty.'.




25k accounting routing fail

25k accounting error.jpg


100k accounting routing fail

100k accounting error.jpg


@annajhaveri So in this example I am trying to process a request that is a New Project ID which is tied to 'Project Budget Amount.' The 'Budget Increase Amount' is a number amount (XXXXX.XX) tied to the Increase Budget to Existing Project ID option which was not selected. It's null in this case. That's why I think I'm getting the error. 

@knandez05  Use following expression, this will handle null value, if the value is null the variable will be assigned zero otherwise the value from column will be assigned to variable, replace Percent, with your column name.

@{if(empty(outputs('Get_item')?['body/Percent']), 0, int(outputs('Get_item')?['body/Percent']))}


Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.

@annajhaveri It doesn't seem to be taking the expression. I tried using 'BudgetIncreastAmt' in place of the column name and it still isn't working. 

@{if(empty(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1]), 0, int(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1]))}

 variable expression error.jpg

@knandez05 in your expression a quote ( ' ) is missing after 'body/rc5fa423dceaf456393218ec3e3796cf1]. Please use below expression

if(empty(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1']), 0, int(outputs('Get_item')?['body/rc5fa423dceaf456393218ec3e3796cf1']))
Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Helper III
Helper III

Sorry for the oversight and thank you @annajhaveri. I used 'Get_reponse_details' instead of 'Get_items' and it worked.


But now is it not processing my Conditions. I swear if its not one thing its the other. I appreciate all of your help with this!


When I ran the test for New Project ID at $50k, it didn't process the Budget Increase variable which was good. 

variables run process.jpg


But then my $50k condition it should have processed thru came back as 'false.'

Condition $50k false.jpg


and(greaterOrEquals(variables('Project Budget Amount'),25000),less(variables('Project Budget Amount'),100000))

Condition $25k expression.jpg

@knandez05  can you export the flow and provide the zip file, from screenshot the flow looks correct, but if i see the entire flow, it would give me more idea, of where it is going wrong.

Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Helper III
Helper III

@annajhaveri Thank you for all of your help & patience. It seems to be working now. I ran a full test on all 3 conditions for both request types and had no issues. 

Helper III
Helper III

Hi @annajhaveri. I was wondering if I can trouble you with one last thing....I've been getting a duplicate email at the end of my flow. The first level approval email triggers when I complete the last step in my flow, the accounting approval. I cannot seem to figure out why...I am not getting an error. It would just cause confusion. How can I download a zip file to send to you for review? The file seems too large to include in the code section or even in a photo screenshot (its about 20 pages). Please advise. Thank you again in advance.

@knandez05  you can download the flow by using Export as shown in below screenshot, then upload zip to onedrive and share the link via message here.




Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.

One drive won't work. What other option do I have?


Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.
Helper III
Helper III

Hello @annajhaveri 


Here is the dropbox link to my workflow:


The most recent error has been with the Initialize Variable for Project Budget Amount and/or the Budget Increase Amount or the Set Variable for those respectively. I had the flow working with no issues but once we went into Beta test a user entered $95,227.97 instead of 95227.97 in the Project Number field and this broke the workflow and I cannot seem to fix it.


I would love to see if it is possible to enter $95,227.97 on the form and have it translate into the Approvals email as so. 


Initialize variable Project Budget Amt error

initialize variable proj budg amt.jpg


Initialize variable Budget Increase Amt error

Budget Increase Amt error.jpg


Set variable for Project Budget Amt

Set Variable Project Budget Amount.jpg


Here is how it was setup previously in the same way and it was working. 

Previous Proj Budget Amt succussful.jpg



Project Budget Amount Integer.jpg


Below is the form where the user inputs the Project Budget Amt. I've only been able to get it to work by not including $ or commas.


As in the case with the error above, the user entered the amount with $ and Commas and the process broke. I have not been able to repair it even when submitting it the correct way below. But having them include $ and commas will better assist in the process of submitting requests and so that the Approval emails are better to understand. 



The approval emails are better understood when the $ and commas are in place. 

approval email.jpg


Any help is much appreciated as always. 

@knandez05  to support the value $95,227.97, you need to define the variable type as Float

Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.

Thank you @annajhaveri. How does that affect/change the expression I currently have for the Set Variable for both Project Budget Amount and Budget Increase Amount?


Project Budget Amt & Increase Budget Amt Initialize & Set Variables.jpg


Set variable - Project Budget Amt



Set variable - Budget Increase Amt



@knandez05  in the expressions wherever you are using int, you need to change it float

Anna Jhaveri

If I have answered your question, please mark the post as Solved to help other users to identify the correct answer
If you like my response, please give it a Thumbs Up.

Helpful resources


Celebrating a New Season of Super Users with Charles Lamanna, CVP Microsoft Business Applications

February 8 was the kickoff to the 2024 Season One Super User program for Power Platform Communities, and we are thrilled to welcome back so many returning Super Users--as well as so many brand new Super Users who started their journey last fall. Our Community Super Users are the true heroes, answering questions, providing solutions, filtering spam, and so much more. The impact they make on the Communities each day is significant, and we wanted to do something special to welcome them at our first kickoff meeting of the year.   Charles Lamanna, Microsoft CVP of Business Applications, has stressed frequently how valuable our Community is to the growth and potential of Power Platform, and we are honored to share this message from him to our 2024 Season One Super Users--as well as anyone who might be interested in joining this elite group of Community members.     If you want to know more about Super Users, check out these posts for more information today:    Power Apps: What is A Super User? - Power Platform CommunityPower Automate: What is A Super User? - Power Platform Community Copilot Studio: What is A Super User? - Power Platform Community Power Pages: What is A Super User? - Power Platform Community

February 2024 User Group Update: Welcoming New Groups and Highlighting Upcoming Events

It's a new month and a brand-new year, which means another opportunity to celebrate our amazing User Groups!Each month, we highlight the new User Groups that have joined the community. It's been a busy season for new groups, because we are thrilled to welcome 15 New User Groups! Take a look at the list below, shared by the different community categories. If your group is listed here, give this post a kudo so we can celebrate with you!   We love our User Groups and the difference they make in the lives of our Community! Thank you to all the new User Groups, new User Group leaders--we look forward to hearing about your successes and the impact you will leave!   In addition to our monthly User Group spotlight, it's a great time to share some of the latest events happening in our User Group community! Take a look at the list below to find one that fits your schedule and need! There's a great combination of in-person and virtual events to choose from. Also, don't forget to review the many events happening near you or virtually! It's a great time of year to connect and engage with User Groups both locally and online. Please Welcome Our NEW User Groups   Power Platform: Heathcare Power Platform User Group Power Platform Connect Hub Power Platform Usergroup Denmark Mexico Norte- Power Platform User Group Pune Power User Group Sudbury Power Platform User GroupMicrosoft User Group GhanaMPPBLR - Microsoft Power Platform Bengaluru User Group Power Apps:   Myrtle Beach Power Platform User GroupAnanseTechWB PowerApps Copilot Studio: Pathfinders Power Platform Community Dynamics365: Cairo, Egypt MSD 365 Business Central/NAV/F&O User GruopMS Dynamics 365 Business Central LatamCincinnati OH D365 F&O User Group February User Group Events February 2024 Cleveland Power Platform User GroupPortallunsj - Februar 2024Indiana D365/AX February User Group MeetingQ1 2024 KC Power Platform and Dynamics 365 CRM Users Group 

January 2024 Community Newsletter

Welcome to our January Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members. If you're new to the Community, please make sure to follow the latest News & Announcements in each Community and check out the Community on LinkedIn as well! It's the best way to stay up-to-date in 2024 with all the news from across Microsoft Power Platform and beyond.      COMMUNITY HIGHLIGHTS Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, giving (and receiving!) kudos, and consistently providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, make it your New Year's Resolution to be more active in the community in 2024.   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzWarrenBelzPstork1saudali_25LaurensMPstork1stephenrobertLucas001AARON_ClbendincpaytonSurendran_RANBNived_NambiarMariamPaulachanNikhil2JmanriqueriosANBJupyter123rodger-stmmbr1606Agniusstevesmith27mandelaPhineastrice602AnnaMoyalanOOlashynBCLS776grantjenkinsExpiscornovusJcookSpongYeAARON_CManishSolankiapangelesPstork1ManishSolankiSanju1Fubar   LATEST NEWS Power Platform 2024 Release Wave Highlights This month saw the 2024 Release Wave 1 plans for Microsoft Power Platform and Microsoft Dynamics 365- a compilation of new capabilities planned for release between April and September 2024. Click here to read Corporate Vice President Maureen (Mo) Osborne's detailed breakdown of the upcoming capabilities, and click the image below to check out some of the Power Platform 2024 Release Wave 1 highlights.     "What's New" Power Platform Shorts Series This month we also launched our brand-new 'Power Shorts' series on YouTube - a selection of super sweet snapshots to keep you in the loop with all the latest trends from across the Power Platform and beyond. Click the image below to check out the entire playlist so far, and don't forget to subscribe to our YouTube channel for all the latest updates.   Super User In Training (S.U.I.T) It was great to see the Power Platform Community officially kick off Season One of their Super User in Training (SUIT) program this month! Their first meeting saw an amazing turnout of over 300 enthusiastic participants who started their dynamic journey toward becoming Super Users. Huge thanks to Manas Maheshwari, Eric Archer, Heather Hernandez, and Duane Montague for a fantastic kick-off. The first meeting also saw seasoned Super User, Drew Poggemann, share invaluable insights on navigating the #MicrosoftCommunity with finesse. Many thanks to Drew for setting the stage and emphasizing the importance of active engagement and the art of providing thoughtful community solutions. If you want to learn more about the features and benefits of gaining Super User status, click the image below to find out more, and watch this space for more info about Season Two and how you can SUIT UP in the community!     UPCOMING EVENTS Microsoft 365 Community Day - Miami - February 1-2, 2024 It's not long now until the Microsoft 365 Community Day Miami, which will be taking place at the Wolfson Campus at Miami Dade College on 1-2 Feb. 2024. This free event is all about unlocking the full potential of Power Platform, Microsoft 365, and AI, so whether you’re a tech enthusiast, a business owner, or just curious about the latest Microsoft advancements, #M365Miami is for you.   The event is completely free and there will sessions in both English and Spanish to celebrate the vibrant and diverse make-up of our amazing community. Click the image below to join this amazing Community Day in Miami and become a part of our incredible network of learners and innovators!     Microsoft Fabric - Las Vegas - March 26-28, 2024 Exciting times ahead for the inaugural #MicrosoftFabric Community Conference on March 26-28 at the MGM Grand in Las Vegas. And if you book now, you can save $100 off registration! The Microsoft Fabric Conference will cover all the latest in analytics, AI, databases, and governance across 150+ sessions.   There will be a special Community Lounge onsite, interactive learning labs, plus you'll be able to 'Ask the Experts' all your questions to get help from data, analytics, and AI specialists, including community members and the Fabric Customer Advisory Team. Just add the code MSCUST when registering for a $100 discount today. Click the image below to find out more about the ultimate learning event for Microsoft Fabric!     Microsoft 365 Conference - Orlando - April 30 - May 2, 2024 Have you added The Microsoft 365 Conference to your community calendar yet? It happens this April 30th - May 2nd in Orlando, Florida. The 2024 Microsoft 365 Conference is one of the world’s largest gatherings of Microsoft engineers and community, with a strong focus on Power Platform, SharePoint, Azure, and the transition to an AI-powered modern workplace.   Click the image link below to find out more and be prepared to be enlightened, educated, and inspired at #M365Conf24!   LATEST COMMUNITY BLOG ARTICLES Power Apps Community Blog Power Automate Community Blog Copilot Studio Community Blog Power Pages Community Blog Check out 'Using the Community' for more helpful tips and information: Power Apps, Power Automate, Copilot Studio, Power Pages  

Super Users 2024 Season One is Here!

   We are excited to announce the first season of our 2024 Super Users is here! Our kickoff to the new year welcomes many returning Super Users and several new faces, and it's always exciting to see the impact these incredible individuals will have on the Community in 2024! We are so grateful for the daily difference they make in the Community already and know they will keep staying engaged and excited for all that will happen this year.   How to Spot a Super User in the Community:Have you ever written a post or asked for help in the Community and had it answered by a user with the Super User icon next to their name? It means you have found the actual, real-life superheroes of the Power Platform Community! Super Users are our heroes because of the way they consistently make a difference in the Community. Our amazing Super Users help keep the Community a safe place by flagging spam and letting the Community Managers know about issues. They also make the Community a great place to find answers, because they are often the first to offer solutions and get clarity on questions. Finally, Super Users share valuable insights on ways to keep the Community growing, engaging, and looking ahead!We are honored to reveal the new badges for this season of Super Users! Congratulations to all the new and returning Super Users!     To better answer the question "What is a Super User?" please check out this article: Power Apps: What is A Super User? - Power Platform CommunityPower Automate: What is A Super User? - Power Platform Community Copilot Studio: What is A Super User? - Power Platform Community Power Pages: What is A Super User? - Power Platform Community

Did You Attend the Microsoft Power Platform Conference in 2022 or 2023? Claim Your Badge Today!

If you were one of the thousands of people who joined us at the first #MPPC Microsoft Power Platform Conference in 2022 in Orlando--or attended the second-annual conference in Las Vegas in 2023--we are excited to honor you with a special community badge! Show your support for #MPPC Microsoft Power Platform Conference this year by claiming your badge!           Just follow this link to claim your badge for attending #MPPC in 2022 and/or 2023: MPPCBadgeRequest    Want to earn your badge for 2024? Just keep watching our News & Announcements for the latest updates on #MPPC24.

Microsoft Power Platform | 2024 Release Wave 1 Plan

Check out the latest Microsoft Power Platform release plans for 2024!   We have a whole host of exciting new features to help you be more productive, enhance delegation, run automated testing, build responsive pages, and so much more.    Click the links below to see not only our forthcoming releases, but to also try out some of the new features that have recently been released to market across:     Power Apps  Power Automate  Copilot Studio   We can’t wait to share with you all the upcoming releases that will help take your Power Platform experience to the next level!    Check out the entire Release Wave: Power Platform Complete Release Planner 

Users online (1,676)