cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
johnmarlowe
Advocate III
Advocate III

No Dynamic Content Available / Ask in Powerapps Missing

Hi

I've previously been able to build flows that connect via our on prem gateway and execute stored procedures by passing a value in from powerapps. Normally when I select the Stored Procedure and click in the Parameter box I am able to select "Ask In Powerapps", however I now see the message "No Dynamic Content Available". I've tried this with different stored procedures and get the same issue. All the apps I've set up previously using this same method has allowed this and still allows it. It just seems to be affecting new or edited workflows.

 

Anyone have any idea what the problem could be?

 

 

28 REPLIES 28
johnmarlowe
Advocate III
Advocate III

Just to give you a screen shot of my issue:

resendLetter Issue.png

Same issue.  I'm wondering if it has anything to do with another issue I've submitted a support ticket about:  unable to connect to the Flow Management connector in either Flow or PowerApps.  Attempting to do so results in a "We received a bad request." message on sign-in.   And possibily related to a third issue:  unable to provide parameters to the Flow Run command in PowerApps.  All attempts to do so result in an "Invalid number of arguments" error.

v-xida-msft
Community Support
Community Support

Hi @johnmarlowe,

 

I have made a test on my side and don’t have the issue that you mentioned.

When I create a new flow:6.JPG

When I edit the flow:7.JPG

 

Please take a try to clean the cache of Browser and re-create the flow again to check if the issue still exists.

 

Best regards,

Kris

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Kris,

 

Thanks for looking into this.  I will try your suggestion, but please note that I'm working with Microsoft on what may be an underlying issue:  efforts to use the Flow Management connector in either PowerApps or Flow result in a peculiar authentication error ("We received a bad request."). This has already been escalated to the product team.   If Flow Management is what enables visibility of PowerApps dynamic content in Flow, then this would explain its absence.  


 

Please take a try to clean the cache of Browser and re-create the flow again to check if the issue still exists.

 

 


7.JPG

I cleared the browser's cache, but the ability to add dynamic content is not available to me Smiley Sad

I also can not log in into Flow management

Hi @PowerUsers,

 

Which Environment role is your account?

This is a admin-level connector, so if you are an Environemnt admin, you could use this connector to manage all of the flows in your environment.

 

More details about the Flow management connector, please check the following article:

https://flow.microsoft.com/en-us/blog/planner-triggers-connector-improvements/

 

Best regards,

Kris

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

thanks for the answer
but my main problem is that I can not add dynamic fields
although it was still available on Friday

I am experiencing the same issue

Quentin59780
New Member

I'm facing the same problem. There is no way to use the dynamic content! I want to call a store proc and pass parameters to it so I need to use the dynamic content 'ask in powerapp'. is it a bug or does it come from my side?

 

thx

BrettWilkinson
Advocate I
Advocate I

I am experiencing the same issue.

 

I have tried using Chrome, Edge and IE with cleared browser cache/cookies/history.

KAW
Frequent Visitor

Same issue here. 

KAW
Frequent Visitor

I would like to add some information. When I create the Flow from the PowerApps Flow template, there is no "Ask in PowerApps" option. However, creating from blank with the PowerApps trigger, "Ask in PowerApps" is available. As someone else noticed, when I try to edit the newly created Flow, the "Ask in PowerApps" option disappears. 

This seems like a bug because we should be able to edit a Flow without having to recreate it from scratch. 

Although this issue is still outstanding for me, I found an alternate solution that makes it unnecessary -- at least for now -- to use PowerApps at all.  My scenario involves two SharePoint lists, one for messages and one for recipients.  I simply changed to a trigger that launches the flow when a new message is added to the SharePoint online messages list.  

Anonymous
Not applicable

Same issue here

We have the same issue, whether starting from a template or from blank. I also can't open https://flow.microsoft.com/manage any longer. None of my old Flows that start from PowerApps have "Ask in PowerApps" available any longer either. 

Anonymous
Not applicable

Same issue! Dynamic content feature is not available at all. I just want to call a stored proc from powerapp and pass parameters. Do you guys have any solution? is this a bug??

 

Thx


@KAW wrote:

I would like to add some information. When I create the Flow from the PowerApps Flow template, there is no "Ask in PowerApps" option. However, creating from blank with the PowerApps trigger, "Ask in PowerApps" is available. As someone else noticed, when I try to edit the newly created Flow, the "Ask in PowerApps" option disappears. 

This seems like a bug because we should be able to edit a Flow without having to recreate it from scratch. 


 

I tried this as well and have used it as a workaround for the time being so thanks for the tip. It works if you start the creation of your flow from scratch i.e. I went to  https://emea.flow.microsoft.com/en-us/, My Flows, Create From Blank, "Search...Triggers", Search for Powerapps in connectors (Then select Powerapps - Powerapps). Then when you add a New Step from here and select "Execute an SQL Stored Procedure" as normal you get the option for the "Ask In PowerApps".

 

If you try this in the flow creation from web.powerapps.com (i.e. where the selector is already preselected for you) then you don't get the Ask In Powerapps option.

 

Also as you said you get one chance at this, as editing causes the same issue regardless of where you edit the flow criteria - unless you go so far back in the edit you delete the chosen connector and you effectively start again.

 

Anonymous
Not applicable

@johnmarlowe, indeed it works when you go to https://emea.flow.microsoft.com/en-us/ and create a flow from scratch.it's weird... Thk for your tips.

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!  Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Users online (7,325)