cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
joel914823
Helper III
Helper III

Not Equal to today

Im trying to filter query for get items from sharepoint so that it does not get items that are equal to today.

 

The format when it pulls from sharepoint is as such.   

"Created":"2022-11-07T12:06:55Z"

How can I write the filter query to it excludes those items, I've tried to format in the expression but with no luck.  Thank you. 

1 ACCEPTED SOLUTION

Accepted Solutions

Then Scott is right that you only need the less than.  But I would still use the Compose to get the full dateTime in ISO8601 format for midnight. In my experience the comparisons don't work correctly if you aren't using full ISO 8601 format.  So try it with the first Compose I had in my screenshot and set Created lt that compose value.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

View solution in original post

10 REPLIES 10
ScottShearer
Super User
Super User

@joel914823 

Try this for your filter query:

Created lt 'formatDateTime(utcNow(), 'yyyy-MM-dd')'

 

Obviously, the formatDateTime() expression must be entered inside of the expression window.

image.png

If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

Scott
Pstork1
Multi Super User
Multi Super User

Because it includes the time component you can't really use equals.  What you need to do is provide a range. Test it for Created is less that today at midnight and Created is greater than yesterday at midnight.

 



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

@Pstork1 Thank you that makes sense on the range vs. equal.  Pardon my lack in knowledge but how do I put today at midnight and yesterday at midnight?  your guidance is appreciated.

The easiest way is to use a Compose and populate it with Yesterday at Midnight (which is today at 00:00).  Then another Compose to AddDay(midnight,1) to it for today.  Here's a screenshot of an example

image.png



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

@Pstork1 @joel914823 

If the objective is to exclude items that were not created today, I believe that the expression that I posted above will work (time zone not withstanding).

Created lt 'formatDateTime(utcNow(), 'yyyy-MM-dd')'

 

If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

Scott
joel914823
Helper III
Helper III

@ScottShearer Hi Scott - thanks for your reply.  I tried that but it still included it in the get items output.  It may be that utc now its taking into consideration at that moment the flow runs vs a range of time (best guess)

I may have read it wrong.  I thought he was trying to include only the items created or modified today.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.

@Pstork1 I'm looking to exclude items created today

Then Scott is right that you only need the less than.  But I would still use the Compose to get the full dateTime in ISO8601 format for midnight. In my experience the comparisons don't work correctly if you aren't using full ISO 8601 format.  So try it with the first Compose I had in my screenshot and set Created lt that compose value.



-------------------------------------------------------------------------
If I have answered your question, please mark your post as Solved.
If you like my response, please give it a Thumbs Up.
joel914823
Helper III
Helper III

That worked, thank you both! @Pstork1 @ScottShearer 

Helpful resources

Announcements

Power Platform Connections - Episode 7 | March 30, 2023

Episode Seven of Power Platform Connections sees David Warner and Hugo Bernier talk to Dian Taylor, alongside the latest news, product reviews, and community blogs.     Use the hashtag #PowerPlatformConnects on social media for a chance to have your work featured on the show.  

Announcing | Super Users - 2023 Season 1

Super Users – 2023 Season 1    We are excited to kick off the Power Users Super User Program for 2023 - Season 1.  The Power Platform Super Users have done an amazing job in keeping the Power Platform communities helpful, accurate and responsive. We would like to send these amazing folks a big THANK YOU for their efforts.      Super User Season 1 | Contributions July 1, 2022 – December 31, 2022  Super User Season 2 | Contributions January 1, 2023 – June 30, 2023    Curious what a Super User is? Super Users are especially active community members who are eager to help others with their community questions. There are 2 Super User seasons in a year, and we monitor the community for new potential Super Users at the end of each season. Super Users are recognized in the community with both a rank name and icon next to their username, and a seasonal badge on their profile.  Power Apps  Power Automate  Power Virtual Agents  Power Pages  Pstork1*  Pstork1*  Pstork1*  OliverRodrigues  BCBuizer  Expiscornovus*  Expiscornovus*  ragavanrajan  AhmedSalih  grantjenkins  renatoromao    Mira_Ghaly*  Mira_Ghaly*      Sundeep_Malik*  Sundeep_Malik*      SudeepGhatakNZ*  SudeepGhatakNZ*      StretchFredrik*  StretchFredrik*      365-Assist*  365-Assist*      cha_cha  ekarim2020      timl  Hardesh15      iAm_ManCat  annajhaveri      SebS  Rhiassuring      LaurensM  abm      TheRobRush  Ankesh_49      WiZey  lbendlin      Nogueira1306  Kaif_Siddique      victorcp  RobElliott      dpoggemann  srduval      SBax  CFernandes      Roverandom  schwibach      Akser  CraigStewart      PowerRanger  MichaelAnnis      subsguts  David_MA      EricRegnier  edgonzales      zmansuri  GeorgiosG      ChrisPiasecki  ryule      AmDev  fchopo      phipps0218  tom_riha      theapurva  takolota     Akash17  momlo     BCLS776  Shuvam-rpa     rampprakash  ScottShearer     Rusk  ChristianAbata     cchannon  Koen5     a33ik  Heartholme     AaronKnox  okeks      Matren   David_MA     Alex_10        Jeff_Thorpe        poweractivate        Ramole        DianaBirkelbach        DavidZoon        AJ_Z        PriyankaGeethik        BrianS        StalinPonnusamy        HamidBee        CNT        Anonymous_Hippo        Anchov        KeithAtherton        alaabitar        Tolu_Victor        KRider        sperry1625        IPC_ahaas      zuurg    rubin_boer   cwebb365   Dorrinda   G1124   Gabibalaban   Manan-Malhotra   jcfDaniel   WarrenBelz   Waegemma   drrickryp   GuidoPreite    If an * is at the end of a user's name this means they are a Multi Super User, in more than one community. Please note this is not the final list, as we are pending a few acceptances.  Once they are received the list will be updated. 

Register now for the Business Applications Launch Event | Tuesday, April 4, 2023

Join us for an in-depth look into the latest updates across Microsoft Dynamics 365 and Microsoft Power Platform that are helping businesses overcome their biggest challenges today.   Find out about new features, capabilities, and best practices for connecting data to deliver exceptional customer experiences, collaborating, and creating using AI-powered capabilities, driving productivity with automation—and building towards future growth with today’s leading technology.   Microsoft leaders and experts will guide you through the full 2023 release wave 1 and how these advancements will help you: Expand visibility, reduce time, and enhance creativity in your departments and teams with unified, AI-powered capabilities.Empower your employees to focus on revenue-generating tasks while automating repetitive tasks.Connect people, data, and processes across your organization with modern collaboration tools.Innovate without limits using the latest in low-code development, including new GPT-powered capabilities.    Click Here to Register Today!    

Check out the new Power Platform Communities Front Door Experience!

We are excited to share the ‘Power Platform Communities Front Door’ experience with you!   Front Door brings together content from all the Power Platform communities into a single place for our community members, customers and low-code, no-code enthusiasts to learn, share and engage with peers, advocates, community program managers and our product team members. There are a host of features and new capabilities now available on Power Platform Communities Front Door to make content more discoverable for all power product community users which includes ForumsUser GroupsEventsCommunity highlightsCommunity by numbersLinks to all communities Users can see top discussions from across all the Power Platform communities and easily navigate to the latest or trending posts for further interaction. Additionally, they can filter to individual products as well.   Users can filter and browse the user group events from all power platform products with feature parity to existing community user group experience and added filtering capabilities.     Users can now explore user groups on the Power Platform Front Door landing page with capability to view all products in Power Platform.      Explore Power Platform Communities Front Door today. Visit Power Platform Community Front door to easily navigate to the different product communities, view a roll up of user groups, events and forums.

Microsoft Power Platform Conference | Registration Open | Oct. 3-5 2023

We are so excited to see you for the Microsoft Power Platform Conference in Las Vegas October 3-5 2023! But first, let's take a look back at some fun moments and the best community in tech from MPPC 2022 in Orlando, Florida.   Featuring guest speakers such as Charles Lamanna, Heather Cook, Julie Strauss, Nirav Shah, Ryan Cunningham, Sangya Singh, Stephen Siciliano, Hugo Bernier and many more.   Register today: https://www.powerplatformconf.com/   

Users online (3,648)