cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
efialttes
Community Champion
Community Champion

ODATA Filter queries on LookUp columns from a SP List

Hi again!

So, I have implemented a flow that executes a SP Get Items. I am trying to include an ODATA filter; the way I compose it is working fine, but it gives me an empty array as a result. ODATA filters are working fine for me so far if the ODATA expression targets a SP list String column...but do ODATA filters support queries agains a SP list LookUp columns?

 

The filter query expression I am using is:

AppPreloadSlotID eq 'Test | xxxxxx | xxxxx | xxxxxxxxxx | 20180119033416359'

 

ODATA_SearchColumns.png

 

UPDATE: I have found a thread in Flow Forums adressing this same issue https://powerusers.microsoft.com/t5/Building-Flows/OData-Filter-Query-on-SharePoint-Lookup-Site-Colu...

The thread was started in May 2017, just wondering if there is some new functionality covering this topic since then. I have tried also with the following ODATA filter expression, but I am getting a Bad Gateway error:

 

AppPreloadSlotID/Value eq 'Test | xxxxxx | xxxxx | xxxxxxxxxx | 20180119033416359'

 

Thank you in advance!

Did I make your day? If so, mark my response as 'Solution' !!!

También escribo sobre Power Automate en este Blog y en Twitter

1 ACCEPTED SOLUTION

Accepted Solutions
v-yuazh-msft
Community Support
Community Support

Hi @ efialttes,

 

Using OData query to filter items based on Lookup column of SharePoint list is not supported in Microsoft Flow now, if you would like this feature to be added in Microsoft Flow, please submit an idea to Flow Ideas Forum:

https://powerusers.microsoft.com/t5/Flow-Ideas/idb-p/FlowIdeas

 

In condition, you could consider take a try to filter items based on Lookup column of SharePoint list using "Filter array" action.

I have made a test on my side and please take a try with the following workaround as an alternative way:

 1.jpg

 

The “repairshop” column is a Lookup column of my SharePoint list, you could use the “Filter array” action to filter which “AppPreloadSlotID Value” is equal to “Test | xxxxxx | xxxxx | xxxxxxxxxx | 20180119033416359“.

 

The flow works successfully as below:

 

 2.jpg

 


Regards,
Alice Zhang

View solution in original post

17 REPLIES 17
v-yuazh-msft
Community Support
Community Support

Hi @ efialttes,

 

Using OData query to filter items based on Lookup column of SharePoint list is not supported in Microsoft Flow now, if you would like this feature to be added in Microsoft Flow, please submit an idea to Flow Ideas Forum:

https://powerusers.microsoft.com/t5/Flow-Ideas/idb-p/FlowIdeas

 

In condition, you could consider take a try to filter items based on Lookup column of SharePoint list using "Filter array" action.

I have made a test on my side and please take a try with the following workaround as an alternative way:

 1.jpg

 

The “repairshop” column is a Lookup column of my SharePoint list, you could use the “Filter array” action to filter which “AppPreloadSlotID Value” is equal to “Test | xxxxxx | xxxxx | xxxxxxxxxx | 20180119033416359“.

 

The flow works successfully as below:

 

 2.jpg

 


Regards,
Alice Zhang

joshnystrom
Kudo Collector
Kudo Collector

@JackWert clarified in this thread/post https://powerusers.microsoft.com/t5/Building-Flows/OData-Filter-Query-on-SharePoint-Lookup-Site-Colu... that this is a feature (and possibly always was, as I can't find any references to it as a new feature). The syntax is, as quoted from his post:

Super simple solution to this:

InternalFieldName/Title eq 'Lookup Value'

or

internalFieldName/Id eq 'Lookup Id'

Hope this helps someone!
Josh

Network-iQ
Frequent Visitor

I have a similar issue, however, my lookup items are on a dropdown list.

 

I created a seperate list item that did not include a lookup but does have the items in a drop down. I cannot filter them, nor does the array filter return any result.

 

Is this something that is not possible?

 

Thanks

Hey @Network-iQ,

I just did a bit of testing for this and from what I can tell, dropdowns (Choice columns) are treated a little differently. That is, they're actually simpler to filter because they're treated less like a set of attributes, despite their appearance in a JSON payload.

You haven't given a lot of detail around your specific situation, but from the generalities, I'd recommend just giving the ODATA filter a try using the simple syntax:

ChoiceField eq 'Desired value'

While the Choice fields in SharePoint are given Key-value pairs for ID and Value, those IDs and Values don't seem targetable from ODATA as they are with LookUp fields. Notably, Choice IDs are re-assigned according to the list order, making it difficult to gain anything by trying to stick to IDs anyway.

Hope this helps!

Josh

 

Howdy -

 

Thanks for the reply.

 

Let me give you some specifics.

 

I want to be able to send a report that includes only the previous week's data on a specific customer. The Customer column is a lookup to a seperate list with customer contact info in it. I want to be able to output it to an email in table form. The HTML output array is perfect, and that does the job. Presently, however, if I use the ODATA filter, it gives me nothing. If I leave it blank, I get everything in the list.

I have two challenges. Number 1, the ODATA filter will not give me any output. I have it set up to look like this:

Customer eq 'ABC 123'

 

When I run it, the output is just [ ]

 

Secondly, I have been trying to figure out how to get nothing but the previous week's data. I think I can tinker that together, but so far it also pulls everything.

 

Any help you could offer is greatly appreciated.

 

Thanks!

Hey @Network-iQ, that's a big help, especially as it clarifies which type of column you're looking to filter. In this case, an unfiltered Flow will bring back each of your data records with a Customer attribute that looks like this:

"Customer: {
"@odata.type": "#Microsoft.Azure.Connectors.SharePoint.SPListExpandedReference",
"Id": 6,
"Value": "ABC 123"
}

 

As a LookUp field, ODATA needs to be told which sub-attribute you want filtered. The important thing here is that if you're looking to filter by whatever populates "Value", then you actually need to provide the "True name" of the field targeted in the "Get information from:" section of the LookUp column's configuration.

So, if I have CustomerName selected as my target here:

LookUp Column - In this column.JPG

then I need to go check what that Fields "True name" is on the Community Flow Outputs lookup list (viewable in the address bar when editing the target column)

Column TrueName.JPG

and use that "True name" in my ODATA filter.

Give it a try with your CustomerName field called out specifically using the syntax from earlier in the thread. In my example I'd be using:

OutputLookup/Customer_x0020_Name eq 'ABC 123'

 

I've had mixed results filtering SharePoint list items based on date fields, so I'm not able to speak to it with confidence. If I dig into it anytime soon, I'll try to remember to funnel any insights your way.

Hope this helps!

Josh

 

 

HI Josh -

 

Thanks for the reply.

 

The true name is actually 'Company'. I have to wonder if that causes an issue, however. List A is the customer contact info. List B uses a lookup for 'Company'. The name of both the field on list A and on list B is 'Company'. I am going to see if I can filter it using a different parameter. Otherwise, no change.

 

I shall post my results shortly.

Well, if I use a non-lookup column, no problem. It works.

But that is not going to work. Haha.

 

Any ideas would be greatly appreciated.

 

Thanks

Hey @Network-iQ

Yeah, non-lookups are way easier to use here (but much less useful, as you've noted!). While we go through this, if you could provide even more detail as to what specifically you're trying, I, or anyone else reading, may more easily notice anything not quite right. Simple screenshots of your filter and any error message you receive in the Flow action failure goes a long way (though typing it out helps make sure you're not sharing private information).

That being said, you've called out that the arrangement is perhaps a bit confusing, and the detail you've given already does help. I'm going to go out on a limb and guess that you're still just trying it as "Company eq" rather than the less intuitive (but correct):

Company/Company eq 'ABC 123'

Can you please confirm whether you're trying it exactly as above?

Thanks,

Josh

Good lord...I was entering the information in the format you had suggested, but I had missed the fact  that your example used a slightly different term since you did not have all of the information. Company/Company worked perfectly. Thank you so much!

Hey great, I'm glad it worked!
Cheers!
Josh

Is this possible yet? Looking to filter by a Lookup column.

Thanks


@joshnystrom wrote:

@JackWert clarified in this thread/post https://powerusers.microsoft.com/t5/Building-Flows/OData-Filter-Query-on-SharePoint-Lookup-Site-Colu... that this is a feature (and possibly always was, as I can't find any references to it as a new feature). The syntax is, as quoted from his post:

Super simple solution to this:

InternalFieldName/Title eq 'Lookup Value'

or

internalFieldName/Id eq 'Lookup Id'

Hope this helps someone!
Josh


This post should be marked as Answer to the question instead of the one from @v-yuazh-msft . It is clearly a direct solution to the original question and not a workaround. The number of "thumbs up" on this post confirms this.

Also, I think it's a shame that the OP never even bothered to reply to the topic they started, not even a simple "thank you".

Thanks @joshnystrom for mentioning this, it works perfectly.

Thank you, @joshnystrom - this worked perfectly for me!

This should be the answer. Thanks a lot for sharing

This is perfect tip, I was trying to write proper filter code for days.

It worked for me!

Helpful resources

Announcements

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip: Getting Started with Private Messages & Macros

Welcome to TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   This Week's Tip: Private Messaging & Macros in Power Apps Community   Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member!   Our Knowledge Base article about private messaging and macros is the best place to find out more. Check it out today and discover some key tips and tricks when it comes to messages and macros:   Private Messaging: Learn how to enable private messages in your community profile and ensure you’re connected with other community membersMacros Explained: Discover the convenience of macros—prewritten text snippets that save time when posting in forums or sending private messagesCreating Macros: Follow simple steps to create your own macros for efficient communication within the Power Apps CommunityUsage Guide: Understand how to apply macros in posts and private messages, enhancing your interaction with the Community For detailed instructions and more information, visit the full page in your community today:Power Apps: Enabling Private Messaging & How to Use Macros (Power Apps)Power Automate: Enabling Private Messaging & How to Use Macros (Power Automate)  Copilot Studio: Enabling Private Messaging &How to Use Macros (Copilot Studio) Power Pages: Enabling Private Messaging & How to Use Macros (Power Pages)

Tuesday Tip: Subscriptions & Notifications

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week: All About Subscriptions & Notifications We don't want you to a miss a thing in the Community! The best way to make sure you know what's going on in the News & Announcements, to blogs you follow, or forums and galleries you're interested in is to subscribe! These subscriptions ensure you receive automated messages about the most recent posts and replies. Even better, there are multiple ways you can subscribe to content and boards in the community! (Please note: if you have created an AAD (Azure Active Directory) account you won't be able to receive e-mail notifications.)   Subscribing to a Category  When you're looking at the entire category, select from the Options drop down and choose Subscribe.     You can then choose to Subscribe to all of the boards or select only the boards you want to receive notifications. When you're satisfied with your choices, click Save.     Subscribing to a Topic You can also subscribe to a single topic by clicking Subscribe from the Options drop down menu, while you are viewing the topic or in the General board overview, respectively.     Subscribing to a Label Find the labels at the bottom left of a post.From a particular post with a label, click on the label to filter by that label. This opens a window containing a list of posts with the label you have selected. Click Subscribe.     Note: You can only subscribe to a label at the board level. If you subscribe to a label named 'Copilot' at board #1, it will not automatically subscribe you to an identically named label at board #2. You will have to subscribe twice, once at each board.   Bookmarks Just like you can subscribe to topics and categories, you can also bookmark topics and boards from the same menus! Simply go to the Topic Options drop down menu to bookmark a topic or the Options drop down to bookmark a board. The difference between subscribing and bookmarking is that subscriptions provide you with notifications, whereas bookmarks provide you a static way of easily accessing your favorite boards from the My subscriptions area.   Managing & Viewing Your Subscriptions & Bookmarks To manage your subscriptions, click on your avatar and select My subscriptions from the drop-down menu.     From the Subscriptions & Notifications tab, you can manage your subscriptions, including your e-mail subscription options, your bookmarks, your notification settings, and your email notification format.     You can see a list of all your subscriptions and bookmarks and choose which ones to delete, either individually or in bulk, by checking multiple boxes.     A Note on Following Friends on Mobile Adding someone as a friend or selecting Follow in the mobile view does not allow you to subscribe to their activity feed. You will merely be able to see your friends’ biography, other personal information, or online status, and send messages more quickly by choosing who to send the message to from a list, as opposed to having to search by username.

Users online (4,613)