cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
boyombo12
Frequent Visitor

Office Script issue

Dear Community. 

Kindly assist a friend. I have a flow that needs to populate an excel sheet. I have visited the office script documentation page, watched @DamoBird365 video on youtube and wrote the script but the last line is underlining "ObjLineItemOut" whenever i mouse over, it shows this error that says  "office script cannot infer the data type of this variable. please declare a type for the variable." which i dont understand. Here is the code. The "Lineitemarray" that got passed as an argument is from my flow and the screenshoot is shown. Kindly assistLineitemarray.png

 

 

 

function main(workbook: ExcelScript.Workbook,
  StaffName:string,
  Total:string,
  Currency:string,
  Lineitemarray:string="[{}]"
  )
  {
  // your code here
  let sheet = workbook.getFirstWorksheet();

  //update variable pay sheet
  sheet.getRange("C6").setValue(StaffName);
  sheet.getRange("N6").setValue(Currency + Total);

  let ObjLineItemOut = JSON.parse(Lineitemarray);

 

 

3 ACCEPTED SOLUTIONS

Accepted Solutions
DamoBird365
Employee
Employee

Hi @boyombo12 

 

I've spotted a few wee mistakes which should hopefully get you up and running - nearly there though - good effort 😉

 

First thing is the key-value milestone, defined as milestone in the interface but mileStone in array.  Note the capital S.  If you adjust the script, you've got both the interface and for loop to update.

 

Then the main error "Cannot read property 'month' of undefined".  This is caused by the for loop length.  The array key index starts from 0 and the length of your example is 2.  So it must be less than the length, not less than or equal as there will never be an index equal to length.  i=0 and 1 for length 2.

 

  for (let i = 0; i < lineItems.length; i++)

 

Finally, your columns are A to L (not M).  This causes an error after you resolve the above.

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here and like & subscribe to my YouTube Channel thanks 😉

View solution in original post

Hi @boyombo12 ,

Thanks for the tip! The flow now runs with those corrections, but the Script still reads "InventoryArray undefined". The flow also won't populate the excel sheet for the inventory arrayvar. (It populates the facultyName just fine) .Any ideas on why the flow might not be populating the excel template ? The output of the Compose action that calls the select output seems correct (see the image below- had to censor sensitive info), but the script won't transfer it to the excel cells that I defined in the script. Thank you very much!

bordo_1-1624635351413.png

 

 

 

 

 

 

 

View solution in original post

Hi, 

You are almost there. I noticed some errors again. In your formattedrow, I could see currentObject.Serial, currentObject.WarrantyStatus, currentObject.WarrantyEnd but in compose Output I saw it as "Serial Number", "Warranty Status" and Warranty End. You have to replicate whatever in your compose in the interface. Note: Typescript and Javascript wont accept space in variable name. In you compose connector, change  Serial Number to SerialNumber, Warranty Status to WarrantyStatus and Warranty End to WarrantyEnd. Make sure it is declared like that in your interface too. Also effect the change on the formattedrow. It should work after that.

View solution in original post

22 REPLIES 22
DamoBird365
Employee
Employee

Hi @boyombo12 

 

I was lucky enough to have the Excel team look at my script and I didn't initially get that error you mention, albeit i did in later release of Office Scripts.  You need to define the types for the items in the array.  If you take a look here https://github.com/DamoBird365/PowerAutomate/tree/main/ExcelInvoiceDemo you will be able to look at the excelscriptsv1 vs v2. 

 

Below is v2

 

function main(
  workbook: ExcelScript.Workbook,
  invoiceNumber: string,
  date: string,
  paymentMethod: string,
  chequeNo: string,
  jobNo: string,
  vatRate: number,
  customer: Customer,
  sales: Sales[],
) {
  // Get the first worksheet 
  const sheet = workbook.getFirstWorksheet();


  //Update Header of Sales Receipt 
  sheet.getRange("G2").setValue(invoiceNumber);
  sheet.getRange("G3").setValue(date);
  sheet.getRange("B9").setValue(paymentMethod);
  sheet.getRange("D9").setValue(chequeNo);
  sheet.getRange("E9").setValue(jobNo);
  sheet.getRange("G27").setValue(vatRate);


  //Update Customer Details
  const formattedCustomer = [[customer.name], [customer.companyName], [customer.street], [customer.city], [customer.phone]];
  sheet.getRange("C2:C6").setValues(formattedCustomer);


  //Update Sales Lines 
  const salesOffset = 12; //starting row for items on invoice 
  for (let i = 0; i < sales.length; i++) {
    const currentSales = sales[i];
    const formattedSales = [[currentSales.quantity, currentSales.itemNumber, currentSales.description, currentSales.unitPrice, currentSales.discount]];
    const saleCell = `B${salesOffset + i}:F${salesOffset + i}`;
    sheet.getRange(saleCell).setValues(formattedSales);
  }
}


interface Customer {
  name: string,
  companyName: string,
  street: string,
  city: string,
  phone: string,
}


interface Sales {
  quantity: number,
  itemNumber: string,
  description: string,
  unitPrice: number,
  discount: number,
}

 

Note that at the end of the script there is a definition for the Array variable as an interface.  If you provide this as part of the script file, it should then hopefully work as planned and PowerAutomate will enforce the types that you specify.

 

The following video covers your scenario https://www.youtube.com/watch?v=Q7GLQnvJJF0

 

You can jump to the key moment in the video here https://www.youtube.com/watch?v=Q7GLQnvJJF0&t=263

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here and like & subscribe to my YouTube Channel thanks 😉

Thanks for the response. I still have a challenge. i tried to reference my Lineitemarray as (lineitemarray: Lineitemarray[ ]) just like you did for your Sales array but it got underlined again. what connector did you use for you salaes array?? I would appreciate if you could share the flow screenshot.  I used the select connector for mine. Thanks 

DamoBird365
Employee
Employee

Hi @boyombo12 

 

Try this - I am not a Typescript expert btw 😉 but the parse expression expects a string, you can pass the array direct to the office script.

 

function main(workbook: ExcelScript.Workbook,
  StaffName: string,
  Total: string,
  Currency: string,
  Lineitemarray: Lineitemarray[]

) {
  // your code here
  let sheet = workbook.getFirstWorksheet();

  //update variable pay sheet
  sheet.getRange("C6").setValue(StaffName);
  sheet.getRange("N6").setValue(Currency + Total);

}

interface Lineitemarray {
  Month: string,
  InvNo: string,
  Client: string,
  Milestone: string,
  Role: string,
}

 

My flow looks like follows (and there is no reason you cannot use a Select):

 

DamoBird365_0-1623305132546.png

 

And after it runs, I get the following saved to Excel:

 

DamoBird365_1-1623305167800.png

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here and like & subscribe to my YouTube Channel thanks 😉

 

Yours is working because your compose has a static data as the array. Mine is dynamic from get items value. here is the error message and my flow. I saw your message since but was doin a research myself to get it solved but all proved abortive.  

typescript.pngselect connector.png

@boyombo12 
Have you defined an interface for your array?

 

It doesn’t matter about my array being static, check my video and n excel invoicing. In this video I call the data dynamically and run the script 4 times in an apply to each.

 

I believe your error relates to no array definition.

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here and like & subscribe to my YouTube Channel thanks 😉

I have gone through all your videos on this issue. i dont know what the problem is from my end. Here is my script and the flow. The script isnt showing any error but whenever i run my flow i get the error "We were unable to run the script. Please try again.
Runtime error: Line 19: Cannot read property 'month' of undefined"  I have been on this for days. Im getting tired. 

 

function main(workbook: ExcelScript.Workbook,
  StaffName: string,
  Total: string,
  Currency: string,
  lineItems: LineItemarray[]

) {
  // your code here
  let sheet = workbook.getFirstWorksheet();

  //update variable pay sheet
  sheet.getRange("C6").setValue(StaffName);
  sheet.getRange("M6").setValue(Currency + Total);

  const lineOffset = 8; //starting row for items on invoice 

  for (let i = 0; i <= lineItems.length; i++) {
    const currentLineitem = lineItems[i];
    const formattedLineItem = [[currentLineitem.month, currentLineitem.invoiceNumber, currentLineitem.clientName, currentLineitem.milestone, currentLineitem.role, currentLineitem.inflowReceived, currentLineitem.invoicedAmount, currentLineitem.vat, currentLineitem.netInflow, currentLineitem.variablePay, currentLineitem.wht, currentLineitem.netCreditedToAcct]];
    const lineCell = `A${lineOffset + i}:M${lineOffset + i}`;
    sheet.getRange(lineCell).setValues(formattedLineItem);
  }

}
interface LineItemarray {
  month: string,
  invoiceNumber: string,
  clientName: string,
  milestone: string,
  role: string,
  inflowReceived: string,
  invoicedAmount: string,
  vat: string,
  netInflow: string,
  variablePay: string,
  wht: string,
  netCreditedToAcct: string
}

 

Lineitem.pngerror.png

@boyombo12 

 

What does the history output of your lineitemarray select look like? 

Damien

The Output body of the select returned 

 

[
{
"month": "April",
"invoiceNumber": "ED/INV/2/0024",
"clientName": "clear code",
"mileStone": "Second",
"role": "Account Role",
"inflowReceived": ".4,600,000",
"invoicedAmount": "4,000,000.00",
"vat": "300,000.00",
"netInflow": "3,700,000.00",
"variablePay": "97,680.00",
"wht": "4,884.00",
"netCreditedToAcct": "92,796.00"
},
{
"month": "April",
"invoiceNumber": "DJL/INV/2/0024",
"clientName": "Eno",
"mileStone": "Second",
"role": "Account Role",
"inflowReceived": ".5,000,000",
"invoicedAmount": "4,000,000.00",
"vat": "300,000.00",
"netInflow": "3,700,000.00",
"variablePay": "97,680.00",
"wht": "4,884.00",
"netCreditedToAcct": "92,796.00"
}
]

DamoBird365
Employee
Employee

Hi @boyombo12 

 

I've spotted a few wee mistakes which should hopefully get you up and running - nearly there though - good effort 😉

 

First thing is the key-value milestone, defined as milestone in the interface but mileStone in array.  Note the capital S.  If you adjust the script, you've got both the interface and for loop to update.

 

Then the main error "Cannot read property 'month' of undefined".  This is caused by the for loop length.  The array key index starts from 0 and the length of your example is 2.  So it must be less than the length, not less than or equal as there will never be an index equal to length.  i=0 and 1 for length 2.

 

  for (let i = 0; i < lineItems.length; i++)

 

Finally, your columns are A to L (not M).  This causes an error after you resolve the above.

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here and like & subscribe to my YouTube Channel thanks 😉

I salute and appreciate you for your relentless effort to assist me. i almost gave up. When they say "Your head is there in Lagos Nigeria, it shows you are highly respected. Let me use this Medium to say Your head is there. 😁

Hi Damien!

 

Your videos are super helpful and I've watched them all to compose my own flow. It is slightly different than yours as my scenario was not the same. I am receiving a similar error with my flow, it reads as "We were unable to run the script. Please try again.
Runtime error: Line 20: Cannot read property 'length' of undefined". I've defined my array but I keep receiving this error. Would you be able to help me with this ? I would appreciate any insights.

 

Here is my script:

 

function main(
  
  workbook: ExcelScript.Workbook,
  facultyName: string,
  InventoryArray: arrayvar[]

  ){
  // Get the RerportTemplate worksheeet from thr workbook
  let worksheet = workbook.getWorksheet("ReportTemplate");

  worksheet.getRange("C10").setValue(facultyName);


  const startInventory = 17;

  for (let i= 0; i < InventoryArray.length; i++) {
    const currentObject = InventoryArray[i];

    const formattedrow = [[currentObject.title, currentObject.model, currentObject.manufacturer, currentObject.serial, currentObject.warrantystatus, currentObject.warrantyend,]];
    
    const rowRange = `B${startInventory + i}:G${startInventory + i}`;
    worksheet.getRange(rowRange).setValues(formattedrow);
  }

  return "List" + InventoryArray.length + "Records Loaded in Excel"
  
}
  
interface arrayvar {
  title: string,
  model: string,
  manufacturer: string,
  serial: string,
  warrantystatus: string,
  warrantyend: string,
}
 
 
 
And here is my flow:
 
bordo_1-1624596418474.png

 


 

Hello,

 I saw some few mistakes that needs to be corrected. the arravar on the flow has keys Title, Model, Manufacturer, e.t.c that all start with uppercase letters but the interface declared and  const formattedrow variable declared have all in lowercase. Kindly make sure the case is thesame on the flow, interface and const formattedrow . Once you correct that, it should work

Hi @boyombo12 ,

Thanks for the tip! The flow now runs with those corrections, but the Script still reads "InventoryArray undefined". The flow also won't populate the excel sheet for the inventory arrayvar. (It populates the facultyName just fine) .Any ideas on why the flow might not be populating the excel template ? The output of the Compose action that calls the select output seems correct (see the image below- had to censor sensitive info), but the script won't transfer it to the excel cells that I defined in the script. Thank you very much!

bordo_1-1624635351413.png

 

 

 

 

 

 

 

Hi, 

You are almost there. I noticed some errors again. In your formattedrow, I could see currentObject.Serial, currentObject.WarrantyStatus, currentObject.WarrantyEnd but in compose Output I saw it as "Serial Number", "Warranty Status" and Warranty End. You have to replicate whatever in your compose in the interface. Note: Typescript and Javascript wont accept space in variable name. In you compose connector, change  Serial Number to SerialNumber, Warranty Status to WarrantyStatus and Warranty End to WarrantyEnd. Make sure it is declared like that in your interface too. Also effect the change on the formattedrow. It should work after that.

bordo
Frequent Visitor

Hi @boyombo12 ,

 

That did the trick! Thank you so much for your help.

Happy that you are good to go. Kindly accept my comment as the solution to help other community members that could have such challenge in the nearest future.

takolota
Multi Super User
Multi Super User

So if anyone is getting really confused why there's an error on the top line where you're declaring the flow array variable like 
TestArray: testArray[]

And the interface at the bottom has your name like testArray greyed out, make sure you closed off the curly bracket } to the rest of the code before the interface. The interface is a separate segment of the code.
Took me a good 15 minutes to figure out what in the world was wrong. 😅

abhishja
Helper I
Helper I

Hi,

why we are seeing this action currently can't be recorded for Repeated items labels and Buttons (ShowDrillIndicators) in office scrip. Please advise asap

 

Regards,

Abhishek

abhishja_0-1683974705630.png

 

Helpful resources

Announcements

Update! June 13th, Community Ambassador Call for User Group Leaders and Super Users

Calling all Super Users & User Group Leaders   UPDATE:  We just wrapped up June's Community Ambassador monthly calls for Super Users and User Group Leaders. We had a fantastic call with lots of engagement. We are excited to share some highlights with you!    Big THANK YOU to our special guest Thomas Verhasselt, from the Copilot Studio Product Team for sharing how to use Power Platform Templates to achieve next generation growth.     A few key takeaways: Copilot Studio Cookbook Challenge:  Week 1 results are posted, Keep up the great work!Summer of Solutions:  Starting on Monday, June 17th. Just by providing solutions in the community, you can be entered to win tickets to Power Platform Community Conference.Super User Season 2: Coming SoonAll communities moving to the new platform end of July We also honored two different community members during the call, Mohamed Amine Mahmoudi and Markus Franz! We are thankful for both leaders' contributions and engagement with their respective communities. 🎉   Be sure to mark your calendars and register for the meeting on July 11th and stay up to date on all of the changes that are coming. Check out the Super User Forum boards for details.   We're excited to connect with you and continue building a stronger community together.   See you at the call!

Copilot Cookbook Challenge | Week 2 Results | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge is a great way to showcase your creativity and connect with others. Plus, you could win tickets to the Power Platform Community Conference in Las Vegas in September 2024 as an amazing bonus.   Two ways to enter: 1. Copilot Studio Cookbook Gallery:  https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge.   Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  @Dhanush 2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a   Week 2 Results:  Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Kasun_Pathirana1. ManishSolanki2. cloudatica2. madlad3. n/a3. SpongYe4. n/a4. n/a5. n/a5. n/a

Win free tickets to the Power Platform Conference | Summer of Solutions

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**

Celebrating the June Super User of the Month: Markus Franz

Markus Franz is a phenomenal contributor to the Power Apps Community. Super Users like Markus inspire others through their example, encouragement, and active participation.    The Why: "I do this to help others achieve what they are trying to do. As a total beginner back then without IT background I know how overwhelming things can be, so I decided to jump in and help others. I also do this to keep progressing and learning myself." Thank you, Markus Franz, for your outstanding work! Keep inspiring others and making a difference in the community! 🎉  Keep up the fantastic work! 👏👏 Markus Franz | LinkedIn  Power Apps: mmbr1606  

Your Moment to Shine: 2024 PPCC’s Got Power Awards Show

For the third year, we invite you, our talented community members, to participate in the grand 2024 Power Platform Community Conference's Got Power Awards. This event is your opportunity to showcase solutions that make a significant business impact, highlight extensive use of Power Platform products, demonstrate good governance, or tell an inspirational story. Share your success stories, inspire your peers, and show off some hidden talents.  This is your time to shine and bring your creations into the spotlight!  Make your mark, inspire others and leave a lasting impression. Sign up today for a chance to showcase your solution and win the coveted 2024 PPCC’s Got Power Award. This year we have three categories for you to participate in: Technical Solution Demo, Storytelling, and Hidden Talent.      The Technical solution demo category showcases your applications, automated workflows, copilot agentic experiences, web pages, AI capabilities, dashboards, and/or more. We want to see your most impactful Power Platform solutions!  The Storytelling category is where you can share your inspiring story, and the Hidden Talent category is where your talents (such as singing, dancing, jump roping, etc.) can shine! Submission Details:  Fill out the submission form https://aka.ms/PPCCGotPowerSignup by July 12th with details and a 2–5-minute video showcasing your Solution impact. (Please let us know you're coming to PPCC, too!)After review by a panel of Microsoft judges, the top storytellers will be invited to present a virtual demo presentation to the judges during early August. You’ll be notified soon after if you have been selected as a finalist to share your story live at PPCC’s Got Power!  The live show will feature the solution demos and storytelling talents of the top contestants, winner announcements, and the opportunity to network with your community.  It's not just a showcase for technical talent and storytelling showmanship, show it's a golden opportunity to make connections and celebrate our Community together! Let's make this a memorable event! See you there!   Mark your calendars! Date and Time: Thursday, Sept 19th Location: PPCC24 at the MGM Grand, Las Vegas, NV 

Tuesday Tip | Accepting Solutions

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   To enhance our collaborative environment, it's important to acknowledge when your question has been answered satisfactorily. Here's a quick guide on how to accept a solution to your questions: Find the Helpful Reply: Navigate to the reply that has effectively answered your question.Accept as Solution: Look for the "Accept as Solution" button or link, usually located at the bottom of the reply.Confirm Your Selection: Clicking this button may prompt you for confirmation. Go ahead and confirm that this is indeed the solution.Acknowledgment: Once accepted, the reply will be highlighted, and the original post will be marked as "Solved". This helps other community members find the same solution quickly. By marking a reply as an accepted solution, you not only thank the person who helped you but also make it easier for others with similar questions to find answers. Let's continue to support each other by recognizing helpful contributions. 

Users online (1,999)