cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
rhiheu
Advocate III
Advocate III

'Please call loadWorkflow before using the designer' error when editing the automation/flow

Hi,

My automation/flow just stopped firing on the 21/4/20. It is due to trigger and send an email when a new item is created on a SharePoint list. I'm seeing an error when trying to edit it - 'Please call loadWorkflow before using the designer'.

Power Automate error - Please call loadWorkflow before using the designer.jpg

  • It's not showing a failed run in the Runs history
  • It's not showing any errors in the 'Flow checker'
  • Both it's connections (SharePoint and Office 365 Outlook) have green ticks next to them
  • I've tried exporting the app, and re-importing it, this error is showing on the new import but the old Flow won't fire either
  • The Flow is turned on
  • It's on a per user plan, but only runs max 10 times a day so no limit issues I believe
  • I've looked in the O365 Admin Center and Microsoft Power Automate's status is listed as 'Healthy' in the Service health section.

I'm not what else to try. Thanks in advance for your help.

1 ACCEPTED SOLUTION

Accepted Solutions

Thanks @v-litu-msft, I've not had this happen again so I'm going to write it off as a random, rare occurrence for now.

View solution in original post

10 REPLIES 10
v-litu-msft
Community Support
Community Support

Hi @rhiheu,

 

Ok, so the issue happened when you try to edit the Flow "When an item is created in SharePoint list".

I tried to reproduce your Flow but not find the same issue, so it is not a service issue.

If you recreate another Flow with the same trigger and monitor the same SharePoint list, will it happen the same issue?

In other words, could you access the SharePoint list normally?

And another way you could have a try is to recreate a new connection of SharePoint, one possibility is that it is caused by connection expired.

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Hi @v-litu-msft, thanks for your reply. I've been able to get around it by re-importing an old version of the flow and re-building it up to the same point slowly, testing at each step. I haven't hit the same error. I might keep this thread open for a few more days though to see if anyone has any other suggestions as to why it broke though, as it could be a useful reference - the re-building took ages so I would like to avoid having to do that again.

Hi @rhiheu,

 

Actually, I met the same error report when I using Flow, but it's not the same trigger, and it just appears once, after I close it and reopen it, it disappears.

Keep this thread open for a few days is a wise decision. If someone could reproduce it and I met it again, I will report it to Power Automate Development Team.

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

Hi @v-litu-msft, thanks for your reply. Since no one seems to have come across the issue, what should I do with this post? It's not exactly 'solved' but I don't know how else to mark it as inactive or something?

Thanks.

Hi @rhiheu,

 

There is no other way could do but mark as a solution, It's not exactly 'solved' but you could mark your answer to help other users search the post easier to help you what could try.


Best Regards,
Community Support Team _ Lin Tu

Thanks @v-litu-msft, I've not had this happen again so I'm going to write it off as a random, rare occurrence for now.

mjeason
New Member

For what it's worth, I had the same problem with a form submission trigger. I simply clicked a different form in the options and then clicked back to what it's supposed to be.  Seems to be a common enough solution in Power Automate.

Hi there,

I have the same problem. I'm doing the lesson (https://learn.microsoft.com/en-us/training/modules/get-started-flows/flow-monitor-incoming-emails) on the Microsoft Learn platform, but when I send an email, the flow doesn't trigger and times out. Has anyone else done this lesson? I thought that it might be because I didn't have a licence for Power Automate, but I got one and it still doesn't work. 

Hi @v-litu-msft ,

 

I encountered the same error  'Please call loadWorkflow before using the designer'.

 

I have existing workflows that have been working well for a year already. Earlier, at 7:15 a.m. PH time (GMT+8), I found out that it was not triggering, so I tried to open the workflow, click the test run button, and choose "Manually," and then all the items started triggering. But whenever there are newly created items, it will not trigger. I need to click again on the test manually inside workflow in order to trigger the items.

 

Can you help me? 

https://powerusers.microsoft.com/t5/Using-Flows/When-an-item-is-created-with-trigger-condition-not-t...

 

Anonymous
Not applicable

Happens to me as well, randomly.  .....EDIT: I just realized that it happened on a flow that got overlapping executions running in parallel and bogging it all down.   For me, I will try setting concurrent maximums to avoid, that may fix it

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (2,164)