cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Olijk
Helper IV
Helper IV

Power Automate Multi Level Approver Using Get Items List

Hello,

 

Recently, I made a post about multi level approvals and get list @abm assisted with this request and created the following video:  https://youtu.be/CplQ16x2h8U

 

My initial post stated, I am in process of trying to build a multi level approval using a get items list similar to the below. I am not too familiar with using this function…

 

For example, amount Dollar

Amt| Approvers

0-10k| one approver

10001-50000| multiple approvers

50001-100000| multiple approvers and so forth. It would be 8 levels of approvers based on amt.

 

Below was my initial flow:

-when and item is created

-update item to pending manager approval

-start and wait approval 

-Condition- if outcome is approved

-update item to approve /terminate flow if not approved

 

-condition, if item is over 10000—

-update item to pending additional approvals

-start and wait approval

-Condition- if outcome is approved

-update item to approve

-condition if item is over 50k…

-update item to pending additional approvers

-start and wait approval 

-condition if approved

-update item to approve…

 

This would continue up to 8 levels depending upon the amount. 

 

This Youtube video was spot on when using a list with based on dollar thresholds and one approver.  However, upon doing more research and communicating with @abm my initial ask using get items was incorrect.  This would be a sequential flow, so once the manager approves, and dependent upon the amount, it would go to Level 2 approvers then Level 3 approvers and so forth.  For example, if my amount was over 55k, then, my manager would have to approve first, then the second level manager would have to approve and then the 3rd level would have to approve and so forth. I was looking for the below:

 

-When an item is created

-Start and waits for Manager approval

-Condition if approved (if rejected update item to rejected and terminate the flow)

-Update item to approved

-Get Items (for anything over 10000k)

-Start and Wait Approval for approvers (from the Get list) over 10000k

-Condition if approved

-Update item to approved

 

Thank you in advance Power Automate Community!

1 ACCEPTED SOLUTION

Accepted Solutions
abm
Most Valuable Professional
Most Valuable Professional

Hi @Olijk 

 

Made a video regarding this. Watch the video and comment.

 

https://youtu.be/cpNS2P7QVRo

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

View solution in original post

14 REPLIES 14
Deano12
Helper III
Helper III

For me there's 2 ways I would consider when doing this. Multi level approval can be done based on conditions for each step of the process, keep in mind that only 8 conditions can be used per flow process.

 

Scope:

Approve level 1 > Direct Line Manager
Approved
Condition | Is Column2 value >= ## 

Yes

Approve level 2 > Threshold 1 Approvers

Approved

Yes

Condition | Is Column2 value >= ###

Yes

Approve level 3 > Threshold 2 Approvers 

 

Follow under all conditions with the final action of what ever takes place once all approval levels have been completed.

 

-------------------

Second Option

 

Flow 1 - handles the Line Manager approval

Flow 2 - Triggers when item is modified and contains trigger conditions for 'lvl 1 approve' eq true AND Column2 >= ##

Flow 3 - Uses the same set of conditions as flow 2 but with different threshold. Instead of lvl 1 approve, make it 'lvl 2 approve eq true AND Column 2 >= ###

Continue to build flows for each level of approval.

 

Its up to you which way you go, it's nice to have everything in 1 flow, but you will end up being restricted to 8 total conditions and if something breaks, you'll need to backwards engineer a large flow. Where as with each individual flow, you are unrestricted in terms of conditions as well as it's easier to see which one failed.

abm
Most Valuable Professional
Most Valuable Professional

Hi @Olijk 

 

Is that means the first 10K always approved by the managers? (First Level). That means second level amount is 10001-50000| multiple approvers and so on.

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Hello @abm ,

Yes that is correct. The first 10k will always be approved my the manager (first level).

 

This statement is also correct…That means second level amount is 10001-50000| multiple approvers and so on.

abm
Most Valuable Professional
Most Valuable Professional

Hi @Olijk 

 

Thanks. Will get back to you.



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials
abm
Most Valuable Professional
Most Valuable Professional

Hi @Olijk 

 

Made a video regarding this. Watch the video and comment.

 

https://youtu.be/cpNS2P7QVRo

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Hello @abm,

 

Thank you sooo much for the video!  It was super helpful. This worked for one of my flows and partially my second flow.  However, I have a new wrinkle.  In my second form, the user would select their manager, which was apart of the flow you built on Youtube.

The wrinkle is if 2 people select their manager which has approvals up to 50K, then that manager would get 2 emails based on the approval config, correct.  However, if the other users select their manager, then the flow works as it was designed to do. Should I create another config table or add on to the condition outside of the loop? For example if outcome is equal to approve and the approver email is address is not equal to @yahoo.com, then follow the Youtube flow. Condition 2 if outcome is equal to approve and is equal to @gmail.com (which would be the 2 users that select their managers name with approvals up to 50K), then dont send an 2 emails...go to o the next step.  Maybe do another start and wait approval and then...This is where I am getting stuck. 

 

The second wrinkle is that the user would like to select the third level of approvals on the submission form.  I was thinking about adding a specific field to the form and then in the start and wait approvals bringing in that field so the approvers would know who needs to approve. Thoughts???

abm
Most Valuable Professional
Most Valuable Professional

Hi @Olijk 

 

I have made the video based on that requirement. Not sure you explain this or not. Not sure what you meant by 2 people select their managers? That configuration is flexible enough to send approvals based on any range of amount and multiple approvers. 



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Hello @abm ,

 

Thank you for the reply.  I will try to explain further

Fill out the SP form

Select their managers name 

 

The flow:

-Get manager Approval first (this is now the new wrinkle). 2 managers in this list has approvals up 50K. This would mean that the manager would get 2 emails based on the approval config, 1 as the first level approver then the other one as the 2nd level approver. Should I add a condition after start and wait approval or create a 2nd config?

-Then use get items to filter out the Approval Config list based on dollar amount.

abm
Most Valuable Professional
Most Valuable Professional

Hi @Olijk 

 

The first level is the manager which is upto 10K. Once that is approved then second level approval (10K - 50k) which is going to be by two managers. So it will send approval for second level first manager and wait for his approval. Once he approved then it will send second approval for the second manager. I am not sure why you need another config? This is what you explained me and I have re-worked on the video earlier. Looks like you keep changing the requirements. 

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Hello @abm 

Thank you for the email and yes I understand what the flow is doing. Yes, the requirements keep changing based on the users. The current set up works because I have tested multiple times. I believe I may just need to change the submission form requirements based on the users preference and remove the 2nd level from the approval config and hard code the start and wait approvals for the first 2 levels and then continue with the flow from the video.

abm
Most Valuable Professional
Most Valuable Professional

Hi @Olijk 

 

Thats looks like an option. Based on the original requirement I believe the solution I provided is correct. I would appreciate if you could mark accept as solution.

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Hello @abm ,

 

i just accepted the video as a solution. I thought I did that a few days ago☺️

Hello @abm   ,

 

I had to adjust my power apps to include another field that has a dollar amount. So when the user selects one form type amount field A appears, when the user selects another form type amount field B appears.

 


When I go to get items, I followed the video… Formx0020 le Amount.

With my form now having 2 dollars fields, my Odata query was Formx0020 le AmountA or Formx0020 le AmountB. I tried with and without brackets.

When I got to the 3rd Compose, using the split expression, it gives me an error message, as seen on the attached. 

Should I use another Expression?

abm
Most Valuable Professional
Most Valuable Professional

Hi @Olijk 

 

Ideally this should be another new thread. Could you please create and let me know.

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Helpful resources

Announcements

Copilot Cookbook Challenge | WINNERS ANNOUNCED | Win Tickets to the Power Platform Conference

We are excited to announce the "The Copilot Cookbook Community Challenge random winners have been selected for the Challenge.  Thank you to everyone who participated in this challenge.    Copilot Cookbook Gallery:Power Apps Cookbook Gallery: 1. @swaminawale  1. @renatoromao     2.  @SpongYe  2.   @nickpotts10  *Please note if for any reason a winner declines, we will have another random drawing.   Check out all of the Cookbook Submissions: 1. Copilot Studio Cookbook Gallery: https://aka.ms/CS_Copilot_Cookbook_Challenge 2. Power Apps Copilot Cookbook Gallery: https://aka.ms/PA_Copilot_Cookbook_Challenge   There will be 5 chances to qualify for the final drawing: Early Bird Entries: March 1 - June 2Week 1: June 3 - June 9Week 2: June 10 - June 16Week 3: June 17 - June 23Week 4: June 24 - June 30WINNERS ANNOUNCED - JULY 8th     At the end of each week, we will draw 5 random names from every user who has posted a qualifying Copilot Studio template, sample or demo in the Copilot Studio Cookbook or a qualifying Power Apps Copilot sample or demo in the Power Apps Copilot Cookbook. Users who are not drawn in a given week will be added to the pool for the next week. Users can qualify more than once, but no more than once per week. Four winners will be drawn at random from the total qualifying entrants. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once. If they are drawn multiple times, another user will be drawn at random. Prizes:  One Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value, does not include travel, lodging, or any other expenses) Winners are also eligible to do a 10-minute presentation of their demo or solution in a community solutions showcase at the event. To qualify for the drawing, templates, samples or demos must be related to Copilot Studio or a Copilot feature of Power Apps, Power Automate, or Power Pages, and must demonstrate or solve a complete unique and useful business or technical problem. Power Automate and Power Pagers posts should be added to the Power Apps Cookbook. Final determination of qualifying entries is at the sole discretion of Microsoft. Weekly updates and the Final random winners will be posted in the News & Announcements section in the communities on July 29th, 2024. Did you submit entries early?  Early Bird Entries March 1 - June 2:  If you posted something in the "early bird" time frame complete this form: https://aka.ms/Copilot_Challenge_EarlyBirds if you would like to be entered in the challenge. Early Bird Submissions: @renato Week 1 Results:  Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1.  @Mathieu_Paris 1.   @SpongYe 2.  n/a2.   @Deenuji 3.  n/a3.   @Nived_Nambiar  4.  n/a4.   @ManishSolanki 5.  n/a5.    n/a   Week 2 Results:  Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Kasun_Pathirana1. ManishSolanki2. cloudatica2. madlad3. n/a3. SpongYe4. n/a4. n/a5. n/a5. n/a     Week 3 Results:  Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. Parul_Yadav_Neo1. n/a2. SpongYe2. n/a3. n/a3. n/a4. n/a4. n/a5. n/a5. n/a   Week 4 Results:  Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Copilot Cookbook Gallery:Power Apps Cookbook Gallery:1. @nickpotts10  1. @ShrushtiShah  2. @Suniti_0020 2. @swaminawale 3. n/a3. @farukhis786 4. n/a4. @ManishSolanki  5. n/a5.  n/a

Important Update for Community Platform Access | READ ONLY July 16-22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 2 Results | Win free tickets to the Power Platform Conference

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8  

Tuesday Tip | How to Become a Community Blog Author

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   This Week's Topic: How to Become a Community Blog Author We want YOU to be part of the community blog! Sharing your knowledge of Power Platform is an essential part of our community! Here's why:   It helps create a vibrant and dynamic community of makers who can learn from each other’s experiences and insights.It provides a platform for collaboration and innovation, where members can share their ideas and work together to develop new solutions.It helps promote Power Platform by showcasing its capabilities and real-world applications.It helps build trust and credibility in the community because you are providing valuable information and resources your fellow community members can use to improve their skills and knowledge. By sharing your knowledge of Power Platform in the community blog, you help us create a more engaged and informed community, better equipped to tackle complex challenges. To get started with blogging across the Power Platform communities, please visit the following links:   Power Apps: https://powerusers.microsoft.com/t5/Power-Apps-Community-Blog/bg-p/PowerAppsBlog Power Automate: https://powerusers.microsoft.com/t5/Power-Automate-Community-Blog/bg-p/MPABlog Copilot Studios: https://powerusers.microsoft.com/t5/Power-Virtual-Agents-Community/bg-p/PVACommunityBlogPower Pages: https://powerusers.microsoft.com/t5/Power-Pages-Community-Blog/bg-p/mpp_blog   When you follow the link, look for a button like the one below on the right rail of your community blog, and let us know you're interested. We can't wait to connect with you and help you get started. Thanks for being part of our incredible community--and thanks for becoming part of the community blog!  

June 2024 Community Newsletter

It's time for the June Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzcreativeopinionExpiscornovus Fubar AmikNived_NambiarPstork1OliverRodriguesmmbr1606ManishSolankifernandosilvaragavanrajanBCBuizerExpiscornovusrenatoromaoLucas001timlAlexEncodianViswavEmadBeshaiDBO_DVDeenujiUmiantaChrist0fGochixVishnuReddy1997citron-trucmandelaVishalJhaverieetuRoboJohanTprathyooanandm08VictorIvanidzenicoxrfm1964shashankbhidepaulbeck1 rpaa   LATEST NEWS Summer of Solutions 2024 The Summer of Solutions challenge kicked off this month - an amazing Microsoft Community initiative to win free tickets to the Power Platform Community Conferencethis September in Las Vegas. The challenge is NOW OPEN to all #PowerPlatform community members and will consist of four weekly entry periods until July 14th, 2024. Click the image below to find out more on how you can win free tickets to #PPCC24 by entering the Summer of Solutions TODAY!   Microsoft Customer Stories We're constantly working with an array of great businesses across the globe to assist them in taking advantage of the latest business applications technology. If you'd like to find out more about their low code journeys, click the image below to view our playlist of Customer Stories to discover how Accenture, Lumen Technologies, Cineplex, and many more, are streamlining their business processes with Microsoft Power Platform.     Microsoft Leap Program Have you heard of Microsoft Leap - a global program designed to recruit, develop, and upskill unconventional talent for careers in the tech space. Microsoft Leap organizes a number of pathways into the industry, including the recent "NFL Legend Cohort - Technical Program Management" run jointly with the NFL Player Care Foundation (PCF) who are dedicated to helping retired players improve their quality of life. Click the image below to find out more about the great day shared at the Redmond campus and be sure to visit the Microsoft Leap website to discover how this amazing initiative is helping re-launch the lives of countless individuals. www.leap.microsoft.com       UPCOMING EVENTS Biz Apps Partner Summit | Seattle | July 24-25 It's not long now until the Biz Apps Partner Summit, which takes place at the Hilton Bellevue in Seattle on July 24-25, 2024. This event is the perfect place to network, connect, and learn how to scale your Microsoft practice, drive profitable revenue, and dazzle your customers! There's a great selection of speakers, including the likes of Tom Patterson, Donald Kossmann Joseph Corigliano, Cecilia Flombaum, Peter Jensen, John Siefert, Becky Lymberis, Daniel Rippey, and many more. Click the image below to find out more and register today!     TechCon365 & Power Platform Conference | D.C. | August 12-16 Things are hotting up for the next TechCon365 & PWRCON Conference in Washington D.C. on August 12-16, 2024. Featuring the likes of Tamara Bredemus, Sunny Eltepu, Lindsay Shelton, Brian Alderman, Daniel Glenn, Julie Turner, Jim Novak, John White, Jason Himmelstein, Luc Labelle, Emily Mancini, MVP, UXMC, Fabian Williams, Emma Wiehe,and many more, this is the perfect event for those that are looking to gain invaluable insights from industry experts. Click the image below to grab your tickets today!     Power Platform Community Conference | Vegas | Sept. 18-20th Are you ready to come and join the fun in Las Vegas this September at PPCC24? This event is the perfect place to connect with fellow business applications enthusiasts and share your knowledge with the worldwide Microsoft Community. Now's your chance to hold all the aces. Just click the image below to find out more and we hope to see you go ALL-IN this September in Las Vegas!     For more events, click the image below to visit the Community Days website.  

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (4,087)