cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
sbaggio
Frequent Visitor

Problem when comparing dates

Dear All,

Thank you in advance for your help.

My situation is the following:

  1. I've set up a folder with a certain number of agreements.
  2. I've set a time trigger so that every day the following are checked.
  3. There is a column called End Date (date of expiration) and "Notice days" to be given in case I am not willing to proceed any more with the contract.
  4. I've set a calculated column as follows End Date - Notice days - 20 days (named "Renewal Date").
  5. I want that if today date is equal to "renewal date" then i receive a notification.
  6. The flow is working if i set the condition "lessorequal" but I can't make it work when I set the condition as strictly equal.
  7. I need to set it as "equal" because otherwise I will receive emails each day for any contract next to be renewed.
  8. I am working on Sharepoint Online.
  9. I believe the problem relies in the fact that "calculated colums" cannot be set as "date only", instead it always contain time, thus not triggering the condition when it's strictly "equal to".

Any suggestion/workaround?

Thank you again.

 

1 ACCEPTED SOLUTION

Accepted Solutions

Hi @sbaggio

 

I change the strategy, i do a new expression for you

 

use this new function and the result will be correct:

 

div(sub(ticks(utcNow()),ticks(item()?['Renewal_x0020_date'])),864000000000)

 

Sorry for the long resolution, we are growing together


Did I answer your question? Mark my post as a solution!

Gustavo Moraes, o astronauta brasileiro do Flow!


View solution in original post

17 REPLIES 17
gamoraes
Memorable Member
Memorable Member

Hi @sbaggio

 

First of all, welcome to community

 

 

Steps to solve your problem:

 1- Use this expression inside an compose to get the day diference.

  OBS: Don't forget to change the red text to your right column name(if necessary)

 

sub(int(formatDateTime(utcNow(),'yyyyMMdd')),int(formatDateTime(triggerBody()?['Renewal Date'],'yyyyMMdd')))

2- After this put the output in your condition and you can use any condition 😄

 

OBS: In expression I'm using utcNow() if you need to use other timezone change to addHours(utcNow(),-1) where -1 is the difference to utc time, this value can be positive or negative.

 

Best Regards,

 

Gustavo Moraes

 


Did I answer your question? Mark my post as a solution!

Gustavo Moraes, o astronauta brasileiro do Flow!


Hi @gamoraes, thank you for your reply.

Sorry but i think something is missing.

When i run the flow i get the following error.

 

flow error.PNG

This is my flow with your code implemented.

flow as is.PNG

@sbaggio, in this item the column Renewal Date are null?


Did I answer your question? Mark my post as a solution!

Gustavo Moraes, o astronauta brasileiro do Flow!


Looking your flow you need to drag the first Compose inside Apply to each, and change the expression to:

sub(int(formatDateTime(utcNow(),'yyyyMMdd')),int(formatDateTime(item()?['Renewal Date'],'yyyyMMdd')))

 


Did I answer your question? Mark my post as a solution!

Gustavo Moraes, o astronauta brasileiro do Flow!


Some of them. Not all.

 

------

 

I'll explain better:

The list "document" is made by folders, i.e. Agency, Consultancies, insurances, etc. those do not have values in the columns.

Then you enter in the folders where the agreements are and there there are columns filled with informations.

 

Hope it helps.

flow error 2.PNG

Can you change your compose expression to 

 

item()

and post your result(compose output) here please?

 

Best Regards


Did I answer your question? Mark my post as a solution!

Gustavo Moraes, o astronauta brasileiro do Flow!


I've removed users and company name for privacy purposes.

The structure is the same.

{
  "@odata.etag": "\"3\"",
  "ItemInternalId": "1",
  "ID": 1,
  "Renewal_x0020_date": "3799-12-09T23:00:00Z",
  "Modified": "2018-07-25T17:00:38Z",
  "Editor": {
    "@odata.type": "#Microsoft.Azure.Connectors.SharePoint.SPListExpandedUser",
    "Claims": "i:0#.f|membership|UserName@company.com",
    "DisplayName": "User Name",
    "Email": "UserName@company.com",
    "Picture": "https://companyspa.sharepoint.com/agreements/_layouts/15/UserPhoto.aspx?Size=L&AccountName=UserName@...",
    "Department": "",
    "JobTitle": ""
  },
  "Editor#Claims": "i:0#.f|membership|UserName@company.com",
  "Today": "2018-07-26T07:00:00Z",
  "Deadline_x0020_for_x0020_Renewal": "3799-12-29T23:00:00Z",
  "Created": "2017-09-20T14:10:34Z",
  "Author": {
    "@odata.type": "#Microsoft.Azure.Connectors.SharePoint.SPListExpandedUser",
    "Claims": "i:0#.f|membership|UserName@company.com",
    "DisplayName": "User Name",
    "Email": "UserName@company.com",
    "Picture": "https://companyspa.sharepoint.com/agreements/_layouts/15/UserPhoto.aspx?Size=L&AccountName=UserName@...",
    "Department": null,
    "JobTitle": null
  },
  "Author#Claims": "i:0#.f|membership|UserName@company.com",
  "{Identifier}": "Documents%252fAGENCY",
  "{Link}": "https://companyspa.sharepoint.com/agreements/Documents/AGENCY",
  "{Name}": "AGENCY",
  "{FilenameWithExtension}": "AGENCY",
  "{Path}": "Documents/",
  "{ContentType}": {
    "@odata.type": "#Microsoft.Azure.Connectors.SharePoint.SPListExpandedContentType",
    "Id": "0x0120001B6A841DE0818842A8A53704F1154133",
    "Name": "Folder"
  },
  "{ContentType}#Id": "0x0120001B6A841DE0818842A8A53704F1154133"
}

 

Thank you and Best Regards

Aha!

 

Now we can do it!

 

New compose text:

 

sub(int(formatDateTime(utcNow(),'yyyyMMdd')),int(formatDateTime(item()?['Renewal_x0020_date'],'yyyyMMdd')))

 


Did I answer your question? Mark my post as a solution!

Gustavo Moraes, o astronauta brasileiro do Flow!


Dear @gamoraes, Sorry for the late reply.

 

Unfortunatelly, it's still not working.

 

Now i get the following error in the condition action.

 

InvalidTemplate. Unable to process template language expressions for action 'Condizione' at line '1' and column '2529': 'The template language function 'lessOrEquals' expects two parameter of matching types. The function was invoked with values of type 'Integer' and 'String' that do not match.'.

 

The condition is actually set as: Compose output is equal to UtcNow('yyyyMMdd').

 

What am i missing? Thank you and best Regards

 

SB

Hi @sbaggio

 

I am here to help 🙂

 

your condition need to be the result of compose and the days, I remeber you said 20.

 

The expression that you have in compose return an interger with the difference in days(DateNow - RenewDate), you are comparing with a string when you put UtcNow()

 

In short this print compare if it's been 20 days of Renew_Date

Anotação.png


Did I answer your question? Mark my post as a solution!

Gustavo Moraes, o astronauta brasileiro do Flow!


Thank you for your explaination.

Now it's much clearer.

Yet i believe something is wrong.

 

The value i get in return from the compose (referring to the last row) it's 70 , while should be 0.cattura1.PNG

Of course i've double checked the format date structure which is yyyyMMdd.

Any guess?

Thank you.

Hi @sbaggio

 

Waht value you are getting in Flow for RenewDate you this last item?

 

the correct value in Flow may be yyyy-MM-dd or MM/dd/yyyy

 

One way to 'debug' is break the whole expression in multiple composes, to see the result of each part


Did I answer your question? Mark my post as a solution!

Gustavo Moraes, o astronauta brasileiro do Flow!


hi,

The output of "get item" for the column Renewal date is the following:

"Renewal_x0020_date""2018-07-30T22:00:00Z",

 

The corrispondent output in the compose reported is 71.

 

The formula of the compose is the one you posted before:

 

sub(int(formatDateTime(utcNow(),'yyyyMMdd')),int(formatDateTime(item()?['Renewal_x0020_date'],'yyyyMMdd')))

Can't figure out what the problem is.

 

Best Regards.

SB

Hi @sbaggio

 

I change the strategy, i do a new expression for you

 

use this new function and the result will be correct:

 

div(sub(ticks(utcNow()),ticks(item()?['Renewal_x0020_date'])),864000000000)

 

Sorry for the long resolution, we are growing together


Did I answer your question? Mark my post as a solution!

Gustavo Moraes, o astronauta brasileiro do Flow!


Hi!

Seems working now!

Thank you very much!!!!

 

Helpful resources

Announcements

Celebrating a New Season of Super Users with Charles Lamanna, CVP Microsoft Business Applications

February 8 was the kickoff to the 2024 Season One Super User program for Power Platform Communities, and we are thrilled to welcome back so many returning Super Users--as well as so many brand new Super Users who started their journey last fall. Our Community Super Users are the true heroes, answering questions, providing solutions, filtering spam, and so much more. The impact they make on the Communities each day is significant, and we wanted to do something special to welcome them at our first kickoff meeting of the year.   Charles Lamanna, Microsoft CVP of Business Applications, has stressed frequently how valuable our Community is to the growth and potential of Power Platform, and we are honored to share this message from him to our 2024 Season One Super Users--as well as anyone who might be interested in joining this elite group of Community members.     If you want to know more about Super Users, check out these posts for more information today:    Power Apps: What is A Super User? - Power Platform CommunityPower Automate: What is A Super User? - Power Platform Community Copilot Studio: What is A Super User? - Power Platform Community Power Pages: What is A Super User? - Power Platform Community

February 2024 User Group Update: Welcoming New Groups and Highlighting Upcoming Events

It's a new month and a brand-new year, which means another opportunity to celebrate our amazing User Groups!Each month, we highlight the new User Groups that have joined the community. It's been a busy season for new groups, because we are thrilled to welcome 15 New User Groups! Take a look at the list below, shared by the different community categories. If your group is listed here, give this post a kudo so we can celebrate with you!   We love our User Groups and the difference they make in the lives of our Community! Thank you to all the new User Groups, new User Group leaders--we look forward to hearing about your successes and the impact you will leave!   In addition to our monthly User Group spotlight, it's a great time to share some of the latest events happening in our User Group community! Take a look at the list below to find one that fits your schedule and need! There's a great combination of in-person and virtual events to choose from. Also, don't forget to review the many events happening near you or virtually! It's a great time of year to connect and engage with User Groups both locally and online. Please Welcome Our NEW User Groups   Power Platform: Heathcare Power Platform User Group Power Platform Connect Hub Power Platform Usergroup Denmark Mexico Norte- Power Platform User Group Pune Power User Group Sudbury Power Platform User GroupMicrosoft User Group GhanaMPPBLR - Microsoft Power Platform Bengaluru User Group Power Apps:   Myrtle Beach Power Platform User GroupAnanseTechWB PowerApps Copilot Studio: Pathfinders Power Platform Community Dynamics365: Cairo, Egypt MSD 365 Business Central/NAV/F&O User GruopMS Dynamics 365 Business Central LatamCincinnati OH D365 F&O User Group February User Group Events February 2024 Cleveland Power Platform User GroupPortallunsj - Februar 2024Indiana D365/AX February User Group MeetingQ1 2024 KC Power Platform and Dynamics 365 CRM Users Group 

January 2024 Community Newsletter

Welcome to our January Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members. If you're new to the Community, please make sure to follow the latest News & Announcements in each Community and check out the Community on LinkedIn as well! It's the best way to stay up-to-date in 2024 with all the news from across Microsoft Power Platform and beyond.      COMMUNITY HIGHLIGHTS Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, giving (and receiving!) kudos, and consistently providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, make it your New Year's Resolution to be more active in the community in 2024.   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzWarrenBelzPstork1saudali_25LaurensMPstork1stephenrobertLucas001AARON_ClbendincpaytonSurendran_RANBNived_NambiarMariamPaulachanNikhil2JmanriqueriosANBJupyter123rodger-stmmbr1606Agniusstevesmith27mandelaPhineastrice602AnnaMoyalanOOlashynBCLS776grantjenkinsExpiscornovusJcookSpongYeAARON_CManishSolankiapangelesPstork1ManishSolankiSanju1Fubar   LATEST NEWS Power Platform 2024 Release Wave Highlights This month saw the 2024 Release Wave 1 plans for Microsoft Power Platform and Microsoft Dynamics 365- a compilation of new capabilities planned for release between April and September 2024. Click here to read Corporate Vice President Maureen (Mo) Osborne's detailed breakdown of the upcoming capabilities, and click the image below to check out some of the Power Platform 2024 Release Wave 1 highlights.     "What's New" Power Platform Shorts Series This month we also launched our brand-new 'Power Shorts' series on YouTube - a selection of super sweet snapshots to keep you in the loop with all the latest trends from across the Power Platform and beyond. Click the image below to check out the entire playlist so far, and don't forget to subscribe to our YouTube channel for all the latest updates.   Super User In Training (S.U.I.T) It was great to see the Power Platform Community officially kick off Season One of their Super User in Training (SUIT) program this month! Their first meeting saw an amazing turnout of over 300 enthusiastic participants who started their dynamic journey toward becoming Super Users. Huge thanks to Manas Maheshwari, Eric Archer, Heather Hernandez, and Duane Montague for a fantastic kick-off. The first meeting also saw seasoned Super User, Drew Poggemann, share invaluable insights on navigating the #MicrosoftCommunity with finesse. Many thanks to Drew for setting the stage and emphasizing the importance of active engagement and the art of providing thoughtful community solutions. If you want to learn more about the features and benefits of gaining Super User status, click the image below to find out more, and watch this space for more info about Season Two and how you can SUIT UP in the community!     UPCOMING EVENTS Microsoft 365 Community Day - Miami - February 1-2, 2024 It's not long now until the Microsoft 365 Community Day Miami, which will be taking place at the Wolfson Campus at Miami Dade College on 1-2 Feb. 2024. This free event is all about unlocking the full potential of Power Platform, Microsoft 365, and AI, so whether you’re a tech enthusiast, a business owner, or just curious about the latest Microsoft advancements, #M365Miami is for you.   The event is completely free and there will sessions in both English and Spanish to celebrate the vibrant and diverse make-up of our amazing community. Click the image below to join this amazing Community Day in Miami and become a part of our incredible network of learners and innovators!     Microsoft Fabric - Las Vegas - March 26-28, 2024 Exciting times ahead for the inaugural #MicrosoftFabric Community Conference on March 26-28 at the MGM Grand in Las Vegas. And if you book now, you can save $100 off registration! The Microsoft Fabric Conference will cover all the latest in analytics, AI, databases, and governance across 150+ sessions.   There will be a special Community Lounge onsite, interactive learning labs, plus you'll be able to 'Ask the Experts' all your questions to get help from data, analytics, and AI specialists, including community members and the Fabric Customer Advisory Team. Just add the code MSCUST when registering for a $100 discount today. Click the image below to find out more about the ultimate learning event for Microsoft Fabric!     Microsoft 365 Conference - Orlando - April 30 - May 2, 2024 Have you added The Microsoft 365 Conference to your community calendar yet? It happens this April 30th - May 2nd in Orlando, Florida. The 2024 Microsoft 365 Conference is one of the world’s largest gatherings of Microsoft engineers and community, with a strong focus on Power Platform, SharePoint, Azure, and the transition to an AI-powered modern workplace.   Click the image link below to find out more and be prepared to be enlightened, educated, and inspired at #M365Conf24!   LATEST COMMUNITY BLOG ARTICLES Power Apps Community Blog Power Automate Community Blog Copilot Studio Community Blog Power Pages Community Blog Check out 'Using the Community' for more helpful tips and information: Power Apps, Power Automate, Copilot Studio, Power Pages  

Super Users 2024 Season One is Here!

   We are excited to announce the first season of our 2024 Super Users is here! Our kickoff to the new year welcomes many returning Super Users and several new faces, and it's always exciting to see the impact these incredible individuals will have on the Community in 2024! We are so grateful for the daily difference they make in the Community already and know they will keep staying engaged and excited for all that will happen this year.   How to Spot a Super User in the Community:Have you ever written a post or asked for help in the Community and had it answered by a user with the Super User icon next to their name? It means you have found the actual, real-life superheroes of the Power Platform Community! Super Users are our heroes because of the way they consistently make a difference in the Community. Our amazing Super Users help keep the Community a safe place by flagging spam and letting the Community Managers know about issues. They also make the Community a great place to find answers, because they are often the first to offer solutions and get clarity on questions. Finally, Super Users share valuable insights on ways to keep the Community growing, engaging, and looking ahead!We are honored to reveal the new badges for this season of Super Users! Congratulations to all the new and returning Super Users!     To better answer the question "What is a Super User?" please check out this article: Power Apps: What is A Super User? - Power Platform CommunityPower Automate: What is A Super User? - Power Platform Community Copilot Studio: What is A Super User? - Power Platform Community Power Pages: What is A Super User? - Power Platform Community

Did You Attend the Microsoft Power Platform Conference in 2022 or 2023? Claim Your Badge Today!

If you were one of the thousands of people who joined us at the first #MPPC Microsoft Power Platform Conference in 2022 in Orlando--or attended the second-annual conference in Las Vegas in 2023--we are excited to honor you with a special community badge! Show your support for #MPPC Microsoft Power Platform Conference this year by claiming your badge!           Just follow this link to claim your badge for attending #MPPC in 2022 and/or 2023: MPPCBadgeRequest    Want to earn your badge for 2024? Just keep watching our News & Announcements for the latest updates on #MPPC24.

Microsoft Power Platform | 2024 Release Wave 1 Plan

Check out the latest Microsoft Power Platform release plans for 2024!   We have a whole host of exciting new features to help you be more productive, enhance delegation, run automated testing, build responsive pages, and so much more.    Click the links below to see not only our forthcoming releases, but to also try out some of the new features that have recently been released to market across:     Power Apps  Power Automate  Copilot Studio   We can’t wait to share with you all the upcoming releases that will help take your Power Platform experience to the next level!    Check out the entire Release Wave: Power Platform Complete Release Planner 

Users online (1,743)