cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
mhdukes1
Helper II
Helper II

Send email to multiple users via send HTTP request to Sharepoint

Hi, I need assistance with sending one email to multiple users. I created a Microsoft Form for other departments to submit a legal request. This form uses a flow to transfer the information into a sharepoint list and sends a receipt email to the requestor (via send an HTTP request to SP). 

 

Next, I've created another flow for the SP list which has the same information but should go to the assigned staff (default assignee, 2nd assignee and staff). I have a separate column for each email address. The flow fails if I put all three dynamic content columns in the "To" field, and other times it won't hold just one column. It simply removes the information and instead the result is [""] and no email sent.

 

Ultimately, Step 1 processes to the requestor and then Step 2 starts and goes to the assigned staff.  I've learned everything so far via Google and Youtube videos but unable to finish this last part for several weeks. My office wants to utilize Sharepoint as its primary database for requests and document storage. Please I need help ASAP.

 

Step 1 - MS Form (Flow)

mhdukes1_5-1672764703341.png

 

Step 2 - SP List (Flow) 

mhdukes1_4-1672763936741.jpeg

 

 

35 REPLIES 35

@ahleonar ok just so I understand correctly do not use Compose, Select , Join route. Instead after Get Items.....1) Initialize a variable (string); 2) Append to String Variable - this creates an apply to each loop. Where to put the substring formula?

  

mhdukes1_0-1679085669844.png

 

ahleonar
Frequent Visitor

Yes, that is correct. I haven't messed around with setting up the flow like you were thinking of but the way I mentioned should result in having to use less connectors. You will want to append all your contacts to that string variable you created and would like to list in the email so your Dept contacts, Legal contacts and Staff contacts, etc with the same format as my previous post.

 

The substring connector will need come after all your append to string actions required. But keep this outside of your apply to each loops. Think of this as your final formatting before you send your email. 

@ahleonar ok I'm even more confused now and I truly thank you for your efforts. But I'm just not getting where I'm going wrong because the flow continuously produce errors.

 

I need to send to the Dept Approvers and Legal Approvers in one email via HTTP (heck I'll take just one group if it will flow).

mhdukes1_3-1679087246347.png

 

mhdukes1_1-1679086875246.png

 

mhdukes1_2-1679086923478.png

 

@ahleonar also what connector to use for the substring? It shouldn't be so hard to add multiple recipients to an HTTP email (emails to multiple users are sent everyday). If you can, please screenshot a sample flow.....I'd truly appreciate it 😉

mhdukes1_0-1679087944246.png

 

ahleonar
Frequent Visitor

@mhdukes1 It looks like you have the right idea but are not applying the correct formatting around the dynamic content for the emails to append them to a string variable. You need to have the following setup in your append to string variable. It will loop through all the provided emails no matter 1, 2, 3, 15, or 100 emails (obviously 100 emails would be ridiculous but for examples sake why not)

 

 

"{LegalApproverEmail}",

 

 

I also forgot to mention you will use the compose outputs for the "To" recipient line in your Send an HTTP request to SharePoint connector. My apologies there. Screenshots are below for how this would look. I went ahead and quickly recreated your use case. 

 

ahleonar_0-1679088671969.png

 

ahleonar_1-1679088697780.png

ahleonar_2-1679088742269.png

 

Hopefully this helps you out,

 

Cheers and have a good weekend!

 

@ahleonar ok let me try......give me a few minutes and wish me luck...lol! I'll return with the results 😉

 

@ahleonar test succeeded but I didn't get the HTTP email.  Did I complete the substring right? The screen doesn't open for me to see the details.

 

substring(variables('varEmails'), 0, sub(length(variables('varEmails')),1))
 
mhdukes1_1-1679091069590.png

 

 

Thanks.

mhdukes1_0-1679090788172.png

P.S. I didn't use the Signature Approvers because no dynamic content option. I rechecked the list and column is multi-person (with name and presence selected).....

ahleonar
Frequent Visitor

@mhdukes1 substring looks right to me. Do you have any email rules that will would cause the email not to appear in your inbox? Personally I have a no-reply testing folder in my outlook so that I don't spam my inbox testing emails. That could be the reason why  you don't see the email in your inbox.

 

You also will need to have access to the SharePoint site you are using for your URL in order to receive the emails. This includes users you are trying to send emails too as well.

 

I also don't think the name and presence would affect you being able to add signature approvers to the email but I've never done much with name and presence option for person column. 

 

If no to both of those things above, I'd need to see the output of the flow run to see the output of the send an HTTP to determine further. Also why do you have all the actions inside an apply to each loop? Is that from the get items connector where you grab the item in SP you are using the values to determine who gets emails sent to them?

@ahleonar yes, the items are in an apply to each because of the Get Items connector. The Append to String Variable applies the loop when the value is "Legal Approvers Email". I tried but it won't let me drag it out. 

 

I have full control permissions and no restrictions. The HTTP email triggers fine with static email addresses as it appeared in my inbox. However, my flow requires dynamic content because the emails must be forwarded to the assigned staff.

 

Here's the output after testing - unable to open to see details.

mhdukes1_1-1679092704675.png

 

 

@mhdukes1 Makes sense. I'd need to see the output of the HTTP connector to provide any further advice. 

 

See if you can copy the connector and paste it outside of that apply to each maybe to generate an output? I'd do this with the substring compose connector as well. You should be able to reference the variable outside of the apply to each.

 

If you don't have luck with that can you use the get item connector instead of get items? You could use the ID from the "When an item is created" trigger of your flow for the ID required to use the "get item" connector. I prefer grabbing items this way so you can avoid the apply to each loops.

@ahleonar thanks for all your help thus far. I'm starting from scratch trying to determine the breakdown. This is may first Append to String variable.

value (Legal Approvers)

Name: VarEmails

Value: Legal Approvers Email

mhdukes1_1-1679095110481.png 

 

this is the result - no value stored

mhdukes1_2-1679095289935.png

 

 

@mhdukes1 Try changing the output on your apply connector to each as "Legal Approver". This will may create an additional apply to each loop but I would assume that is why you are getting a blank value. If you are saving the value to a string variable the extra loop shouldn't matter either. You should be able to reference the variable outside of the apply to each. See screenshot below for clarification, I apologize in advance for my bad handwriting 😂

 

Only other explanation would be that the value for Legal approvers you are pointing to in SharePoint is blank. 

 

 

ahleonar_1-1679095798409.png

 

@ahleonar did the same as you but still no result

 

LegalApprovers.....the LegalApproversEmail

mhdukes1_1-1679097072208.png

result still the same

mhdukes1_0-1679097023669.png

 

@mhdukes1 Check the output of the get item connector and see if you can find a value for legal approvers. Is there something there?

 

Your setup with the apply to each and append to string look correct. Your append to string connector should contain an email if there are legal approvers listed in the get item connector. If not check the item in SharePoint to make sure it has legal approvers listed on the same ID of the item you're testing. Just don't forget those quotes and comma for the email formatting when you have it figured out! 

@ahleonar finally got a result for HTTP w/no email addresses 

mhdukes1_1-1679098826287.png

mhdukes1_2-1679098916929.png

 

ahleonar
Frequent Visitor

@mhdukes1 Please send a picture of how your Send an HTTP request to SharePoint connector is setup. I would assume that issue has something to do with how you have setup your To line 

Helpful resources

Announcements

Check out the Copilot Studio Cookbook today!

We are excited to announce our new Copilot Cookbook Gallery in the Copilot Studio Community. We can't wait for you to share your expertise and your experience!    Join us for an amazing opportunity where you'll be one of the first to contribute to the Copilot Cookbook—your ultimate guide to mastering Microsoft Copilot. Whether you're seeking inspiration or grappling with a challenge while crafting apps, you probably already know that Copilot Cookbook is your reliable assistant, offering a wealth of tips and tricks at your fingertips--and we want you to add your expertise. What can you "cook" up?   Click this link to get started: https://aka.ms/CS_Copilot_Cookbook_Gallery   Don't miss out on this exclusive opportunity to be one of the first in the Community to share your app creation journey with Copilot. We'll be announcing a Cookbook Challenge very soon and want to make sure you one of the first "cooks" in the kitchen.   Don't miss your moment--start submitting in the Copilot Cookbook Gallery today!     Thank you,  Engagement Team

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Check Out the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community.  We can't wait to see what you "cook" up!    

Welcome to the Power Automate Community

You are now a part of a fast-growing vibrant group of peers and industry experts who are here to network, share knowledge, and even have a little fun.   Now that you are a member, you can enjoy the following resources:   Welcome to the Community   News & Announcements: The is your place to get all the latest news around community events and announcements. This is where we share with the community what is going on and how to participate.  Be sure to subscribe to this board and not miss an announcement.   Get Help with Power Automate Forums: If you're looking for support with any part of Power Automate, our forums are the place to go. From General Power Automate forums to Using Connectors, Building Flows and Using Flows.  You will find thousands of technical professionals, and Super Users with years of experience who are ready and eager to answer your questions. You now have the ability to post, reply and give "kudos" on the Power Automate community forums. Make sure you conduct a quick search before creating a new post because your question may have already been asked and answered. Galleries: The galleries are full of content and can assist you with information on creating a flow in our Webinars and Video Gallery, and the ability to share the flows you have created in the Power Automate Cookbook.  Stay connected with the Community Connections & How-To Videos from the Microsoft Community Team. Check out the awesome content being shared there today.   Power Automate Community Blog: Over the years, more than 700 Power Automate Community Blog articles have been written and published by our thriving community. Our community members have learned some excellent tips and have keen insights on the future of process automation. In the Power Automate Community Blog, you can read the latest Power Automate-related posts from our community blog authors around the world. Let us know if you'd like to become an author and contribute your own writing — everything Power Automate-related is welcome.   Community Support: Check out and learn more about Using the Community for tips & tricks. Let us know in the Community Feedback  board if you have any questions or comments about your community experience. Again, we are so excited to welcome you to the Microsoft Power Automate community family. Whether you are brand new to the world of process automation or you are a seasoned Power Automate veteran - our goal is to shape the community to be your 'go to' for support, networking, education, inspiration and encouragement as we enjoy this adventure together.     Power Automate Community Team

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Users online (4,847)