cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Sleky
Frequent Visitor

SharePoint Calendar and Events

I had initiall posted this in the wrong forum; trying again here!  lol

 

I am trying to create a flow that will:

 

Create a new event unless one exists, then it will update the existing event.

 

I'm [    ] that close to getting this to work!  Just can't figure out the if/then statement.  

 

I can get the flow to email me all the pertinent information, so the trigger is perfect.  I am triggering off of "When an event is created or modified" and it is a List name = "group calendar".

 

I can get the flow to create the event just fine as well.

 

However, what I'm having issues with is if the event exists, it updates it instead of creating a new one.  I just tried one last time to get it to work, and it went thru ALL my events, checked the condition (if the ID matches) and executes on that one event, which will create the event because the ID's don't match.  But then it went onto the next irrelevent event and repeated.  Thankfully Outlook lists events and easy deletion (phew).

 

I can provide SS's or such.  TIA

1 ACCEPTED SOLUTION

Accepted Solutions

Hi @ Slekys,

Do you want the flow to :

  1. When an event is new created in your group calendar list, create a new event in Office365 outlook.
  2. When an event is updated in your group calendar list, update the event in Office365 outlook.

 

Because the outlook event’s id is generated by System automatically, so you need to add a column in your calendar list and save the outlook event’s id in this column.

When an event is created in your outlook, the outlook event’s id should be saved in the column in your calendar list.

Your calendar list should have no event before you create the flow so that all new created event in your calendar list would have a value in outlook event id field.

To add a column in your calendar list ,please follow steps below:

  1. Sign in your sharepoint ,find your calendar list
  2. Click the gear in the calendar list web’s top right ,select Site settings

 1.png

     3.Click the Site columns in the Site settings web.

 

 2.jpg

     4.Click Create in the Site columns web.

3.png

     5.Add a column name “outlook event id” in the Create columns web. the column set to Single line of text type. Make sure to save the column.

 4.jpg

 

 

 

You could create a flow as steps below:

  1. Add a trigger “When an item is created or modified”, fill in your Site Address and calendar list Name.
  2. Add action “Get item”, fill in your Site Address and calendar list Name, choose the ID dynamic content of “When an item is created or modified” in Id field.
  3. Add action “Get events(V1)”, choose your Calendar in Calendar id field.
  4. Add action “Initialize variable”, the Name field set to Integer,the Type field choose Integer, the Value field set to “0”
  5. Add an apply to each, choose the value dynamic content of “Get events(V1)” action in the input field.
  6. Inside the apply to each, add a Condition, the first value set to the outlook event id dynamic content of “Get item”, the second value set to the Id dynamic content of “Get events(V1)”, the condition in the middle select is equal to.
  7. Inside the If yes, add action “Update event(V1)”, choose your Calendar in Calendar id field, choose Id dynamic content of “Get events(V1)” in Id field, choose the End Time, the Start Time dynamic content of “When an item is created or modified”,choose Title dynamic content of “When an item is created or modified” in Subject field.
  8. Add a “Increment variable” under the “Update event(V1)”. Name field choose Interger. Every time the Increment variable action runthe Interger would increase 1.
  9. Outside the apply to each, add a Condition2, the first value set to the Integer dynamic content of Variables, the second value set to “0”, the condition in the middle select is equal to. The Integer’s value would always be “0” if the “Update event(V1)” haven’t run. that stand for “No update event” and mean we need to “Create event” next.
  10. Inside the if yes, add action “Create event(V1)”, choose your Calendar in Calendar id field, choose the End Time, the Start Time dynamic content of “When an item is created or modified”,choose Title dynamic content of “When an item is created or modified” in Subject field.
  11. Add action “Update item” under the “Create event(V1)”, fill in your Site Address and calendar list Name, choose the ID dynamic content of “When an item is created or modified” in Id field, choose the Title dynamic content of “When an item is created or modified” in Title field, choose the Title dynamic content of “When an item is created or modified” in Title field, choose the End Time, the Start Time dynamic content of “When an item is created or modified”, and choose the Id dynamic content of “Create event(V1)”.

 

Image reference:

 5.png6.png7.png

 

 

 

 

When an item is created, the flow run successfully as below:

 

8.png

When an item is updated, the flow run successfully as below:

 9.png

 

 


Regards,
Alice Zhang

View solution in original post

22 REPLIES 22
Sleky
Frequent Visitor

So - Here is what I got.  When it runs, because of an update/creation on the sharepoint calendar.  It will basically creates only one new item at a time and will delete any previous entries into my O365 calendar.

 

That is really puzzeling!

 

Screen Shot 2018-01-24 at 8.17.56 PM.png

Anonymous
Not applicable

Have you tried adding a condition that checks the "ID" of the new event and "ID" in the get events step?

 

If you want your calendar to check if the event already exists, then I think you need a condition that actually looks up event IDs. I have not tested this - I just wanted to share this quick idea!

The second action step is to gather up my calendar events.  I'm wondering if I need to use the "filter" on that step to focus on only the ID we are focusing on.  I tried to but in dynamic content; but it complained about that filter.  So I had to strip it out.

 

I have tried using a conditional action step; but it would change the flow as soon as I left the A = B? condition and change it to an "apply to all items" sorta scenario.  Very odd

 

 

 

 

Screen Shot 2018-01-26 at 7.21.04 AM.png

Screen Shot 2018-01-26 at 7.30.22 AM.png

Anonymous
Not applicable

I think you need the "apply to each", because it needs to check all calendar events to see if there is a matching event. 

 

 

Attached is a screenshot of what I was thinking in terms of the flow steps. I have not fully tested this flow - I wanted to at least quickly share a potential structure. 

 

 

Screen Shot 2018-01-26 at 9.32.17 AM.png

 

Have you tried separating this process into two flows? One flow would start with "when an item is created" trigger and the other would start with "when an item is modified". 

Hi @ Slekys,

Do you want the flow to :

  1. When an event is new created in your group calendar list, create a new event in Office365 outlook.
  2. When an event is updated in your group calendar list, update the event in Office365 outlook.

 

Because the outlook event’s id is generated by System automatically, so you need to add a column in your calendar list and save the outlook event’s id in this column.

When an event is created in your outlook, the outlook event’s id should be saved in the column in your calendar list.

Your calendar list should have no event before you create the flow so that all new created event in your calendar list would have a value in outlook event id field.

To add a column in your calendar list ,please follow steps below:

  1. Sign in your sharepoint ,find your calendar list
  2. Click the gear in the calendar list web’s top right ,select Site settings

 1.png

     3.Click the Site columns in the Site settings web.

 

 2.jpg

     4.Click Create in the Site columns web.

3.png

     5.Add a column name “outlook event id” in the Create columns web. the column set to Single line of text type. Make sure to save the column.

 4.jpg

 

 

 

You could create a flow as steps below:

  1. Add a trigger “When an item is created or modified”, fill in your Site Address and calendar list Name.
  2. Add action “Get item”, fill in your Site Address and calendar list Name, choose the ID dynamic content of “When an item is created or modified” in Id field.
  3. Add action “Get events(V1)”, choose your Calendar in Calendar id field.
  4. Add action “Initialize variable”, the Name field set to Integer,the Type field choose Integer, the Value field set to “0”
  5. Add an apply to each, choose the value dynamic content of “Get events(V1)” action in the input field.
  6. Inside the apply to each, add a Condition, the first value set to the outlook event id dynamic content of “Get item”, the second value set to the Id dynamic content of “Get events(V1)”, the condition in the middle select is equal to.
  7. Inside the If yes, add action “Update event(V1)”, choose your Calendar in Calendar id field, choose Id dynamic content of “Get events(V1)” in Id field, choose the End Time, the Start Time dynamic content of “When an item is created or modified”,choose Title dynamic content of “When an item is created or modified” in Subject field.
  8. Add a “Increment variable” under the “Update event(V1)”. Name field choose Interger. Every time the Increment variable action runthe Interger would increase 1.
  9. Outside the apply to each, add a Condition2, the first value set to the Integer dynamic content of Variables, the second value set to “0”, the condition in the middle select is equal to. The Integer’s value would always be “0” if the “Update event(V1)” haven’t run. that stand for “No update event” and mean we need to “Create event” next.
  10. Inside the if yes, add action “Create event(V1)”, choose your Calendar in Calendar id field, choose the End Time, the Start Time dynamic content of “When an item is created or modified”,choose Title dynamic content of “When an item is created or modified” in Subject field.
  11. Add action “Update item” under the “Create event(V1)”, fill in your Site Address and calendar list Name, choose the ID dynamic content of “When an item is created or modified” in Id field, choose the Title dynamic content of “When an item is created or modified” in Title field, choose the Title dynamic content of “When an item is created or modified” in Title field, choose the End Time, the Start Time dynamic content of “When an item is created or modified”, and choose the Id dynamic content of “Create event(V1)”.

 

Image reference:

 5.png6.png7.png

 

 

 

 

When an item is created, the flow run successfully as below:

 

8.png

When an item is updated, the flow run successfully as below:

 9.png

 

 


Regards,
Alice Zhang

You are a mad scientist!

 

So close, when creating the event in my calendar, it makes, like 8 copies.  I noticed, that when creating the event on the sharepoint calendar, the Outlook EventID isn't being filled with anything.  Is there a way to make that auto-increment on sharepoint when the event is created?

Anonymous
Not applicable

@v-yuazh-msft What a great solution!

 

I implemented your recommendation and the flow successfully created an Outlook event based on the SharePoint calendar item.

 

However, when the SharePoint calendar item was updated at a later time, the flow failed to update the Outlook calendar item with the new SharePoint details. '

 

I receive the following error message for updating the outlook event: 

 

  "message""Your request can't be completed. The start and end times for an all-day event need to be set to midnight.\r\nclientRequestId: 7f137333-d881-415a-953b-bf7e357a7aa1",

 

 

I have the "Update event" settings exactly like the "create event" settings and there is no problem with creating an event. 

I missed the part where it updates the sharepoint item and adds the ID to the sharepoint item.  I've added that - however, it is still creating an separate event for EACH item in my calendar.  Very odd.  Also - for whatever reason, when I update the sharepoint calendar, it will run 2 or 3 times EACH update.  Argh....

 

Also - this just dawned on me.  What'll happen if someone removes the event on sharepoint calendar.  There is an update, but it's gone...  Hmmmmmm

Anonymous
Not applicable

If the event is removed from the SharePoint calendar, I want the flow to run and update (i.e. delete) the Outlook event accordingly. 

 

@v-yuazh-msft - Can this be done? I tested a deletion and the flow did not run. Do you have any other recommendations for addressing the issues we are experiencing?

Here's what I've got.  Runs fine; -ish.  It created 10 events.  <sigh>  Here is my flow as it stands:

Screen Shot 2018-02-06 at 11.16.23 AM.png

Screen Shot 2018-02-06 at 11.16.44 AM.png
Screen Shot 2018-02-06 at 11.17.13 AM.png
Screen Shot 2018-02-06 at 11.17.50 AM.png

Screen Shot 2018-02-06 at 11.18.19 AM.png

 

Here are the results...

Screen Shot 2018-02-06 at 11.19.45 AM.png

 

Here is my calendar now....

Screen Shot 2018-02-06 at 11.19.56 AM.png

 

As far as I can tell, I've got it set-up just how you described.  Yet it is creating a ton of events and not actually working right.  Any thoughts as to why it won't work for me, lol?  I know, user error....  hahahaha  TIA!!

Anonymous
Not applicable

@Sleky It looks like you have both conditions in the "Apply to each". 

 

Place the "Integer equal to 0" condition outside of the "Apply to each" and run another test to see if the flow works as expected. I have my flow set up this way and it creates the events correctly. 

So this is wrong?  The "Condition 2" happens outside of the "Apply to each"?

 

Screen Shot 2018-02-06 at 11.46.08 AM.png

Anonymous
Not applicable

@Sleky This is how mine looks:

 

Screen Shot 2018-02-06 at 11.49.19 AM.png

AWESOMESAUCE!!!!!  So yea, about those event deletions...  hahahahaha!!!  You two rock, thank you both so much!!

 

Screen Shot 2018-02-06 at 12.06.37 PM.png

So - sounds like we have a couple issues left...

 

1.  Event is deleted on sharepoint - retains on calendar

2.  All day events aren't being registered on calendar

 

Lastly - I saw there was some error correcting?  Is that needed?

Well, seems like something Microsoft is needing to immplement.  Grrrr....  

 

https://powerusers.microsoft.com/t5/Flow-Ideas/SharePoint-Trigger-on-Item-Deleting/idi-p/5171

Hi All,
 I have setup as per instructions and mine still appears to be making multiple entries, and it keeps going until I stop it, it is creating a new flow everytime it adds a new item.

Cheers

Sweet, that worked great! Thank you so much for sharing this solution.

This was about when an item is created or modified. Now I want to delete an item that was added to a users calendar via Flow, would this be possible?

Hi @AndriesJ,

 

I don;'t think that you can get to the metadata for the deleted item. I looked into getting the metadata from the recycle bin item using REST API, but that also doesn't give you much detail.

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Winners will be posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (2,282)