cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
alexander75671
Regular Visitor

SharePoint and Get User Profile

I am attempting to build a flow. The trigger is when an item is created in SharePoint, start the flow. I want to also grab the user's phone number and display name to be included in the email notification so I used "Office 365 Users: Get User Profile". 

 

The issue is that "Office 365 Users: Get User Profile" wants the UPN of the user. The closest I can get with "SharePoint: When an item is created" is Created By Email Address, which is not always going to reliably work. 

 

Any ideas of a way to get the UPN from email address or SharePoint Created By?

10 REPLIES 10
faustocapellanj
Memorable Member
Memorable Member

Hi @alexander75671,

 

The thing is the UPN is the email address. I just ran a test flow and used the Created By Email available in the Dynamic content. It returned my email address as the User Principal Name. See screenshot below:

UPN.JPG

Fausto Capellan, Jr
Did I answer your question? Mark my post as a solution! Did my response help? Please give it a thumbs up!
Anonymous
Not applicable

Well yes, the UPN is typically the same as the email address but not in all instances.

When we have a user in our organization change their name, we update their email address, but both their login name, or UPN. So in these cases, the flow would fail and the email notification would not be sent.
Anonymous
Not applicable

Correction.. had a typo.

When we have a user in our organization change their name, we update their email address, but we do not update their login name, or UPN. So in these cases, the flow would fail and the email notification would not be sent.
v-xida-msft
Community Support
Community Support

Hi @alexander75671,

 

Where do you update email address of the user?

Which email address do you update? The email address of the User name or the email address of Authentication contact info in User profile of Azure Active Directory?

Further, could you please share a bit more about the error message of the failed flow?

 

The login name of Office 365 User would map to a unique UPN, if we update the email address of User name, the UPN would make corresponding changes.

 

I have made a test on my side and the flow works well. Please check if you have update the connection of “When an item is created” trigger.

 

Best regards,

Kris

Community Support Team _ Kris Dai
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

I'm not getting an error yet because I know it won't be reliable so it's not in production yet. 

 

The UPN is NOT the email address. The UPN is <username>@<domain>.com. The email address is just the email address. The domain could change but not the email, the username could change but not the email. There just needs to be an option to get the UPN from the SharePoint: When an item is created.

 

It works for me too because my email address is also my UPN, but there are instances where that is not always the case. I have two users wrote down that I quickly found that are this way. It will cause the Flow to fail.

 

https://lostandfoundidentity.wordpress.com/2012/03/22/dude-what-is-my-upn-or-wait-is-it-an-email-add...

 

 

Hi @alexander75671,

 

Thanks for the info in your previous post. My understanding from your original post is that you want to get the user's phone number and display name so it can be included in the email notification. Since the flow will run within the context of the user submitting the list item, you should try the "Office 365 Users - Get my profile". From there you should be able to extract the UPN without having to enter the user's email address since this step does not require additional input.O365-GetMyProfile.JPG

 

Please let us know if that works for you.

Fausto Capellan, Jr
Did I answer your question? Mark my post as a solution! Did my response help? Please give it a thumbs up!

Ahh - so even though the flow is using my credentials, it would still grab the user's who submitted the item's info? If that's the case, that would resolve my issue for now.

 

But I still think there should be a way to grab the UPN for other items like this.

@alexander75671,

 

I agree there should be other ways to get the UPN, but I guess we'll have to wait to see if there will be another way thru flow. On the meantime, test that with some of your users and let me know how the testing goes. Also, if this solves your issue, please mark it as solved in the event other users are faced with the same issue or question.

 

Please let me know if I can be of further assistance.

 

Regards,

Fausto Capellan, Jr

Fausto Capellan, Jr
Did I answer your question? Mark my post as a solution! Did my response help? Please give it a thumbs up!

Tested it and it returns my information (since I have the connection setup under my account for now), not the user that submits the form. So that did not resolve my problem.

@alexander75671,

 

I see what you mean. I created a new SharePoint item using a test account and my info was retrieved in the Get my profile step. We'll have to check with someone from the staff to see if this is the expected behavior of this step.

 

Hi @v-xida-msft, can you please verify my statement above? Thank you

Fausto Capellan, Jr
Did I answer your question? Mark my post as a solution! Did my response help? Please give it a thumbs up!

Helpful resources

Announcements

Community will be READ ONLY July 16th, 5p PDT -July 22nd

Dear Community Members,   We'd like to let you know of an upcoming change to the community platform: starting July 16th, the platform will transition to a READ ONLY mode until July 22nd.   During this period, members will not be able to Kudo, Comment, or Reply to any posts.   On July 22nd, please be on the lookout for a message sent to the email address registered on your community profile. This email is crucial as it will contain your unique code and link to register for the new platform encompassing all of the communities.   What to Expect in the New Community: A more unified experience where all products, including Power Apps, Power Automate, Copilot Studio, and Power Pages, will be accessible from one community.Community Blogs that you can syndicate and link to for automatic updates. We appreciate your understanding and cooperation during this transition. Stay tuned for the exciting new features and a seamless community experience ahead!

Summer of Solutions | Week 4 Results | Results posted on July 24th

We are excited to announce the Summer of Solutions Challenge!    This challenge is kicking off on Monday, June 17th and will run for (4) weeks.  The challenge is open to all Power Platform (Power Apps, Power Automate, Copilot Studio & Power Pages) community members. We invite you to participate in a quest to provide solutions to as many questions as you can. Answers can be provided in all the communities.    Entry Period: This Challenge will consist of four weekly Entry Periods as follows (each an “Entry Period”)   - 12:00 a.m. PT on June 17, 2024 – 11:59 p.m. PT on June 23, 2024 - 12:00 a.m. PT on June 24, 2024 – 11:59 p.m. PT on June 30, 2024 - 12:00 a.m. PT on July 1, 2024 – 11:59 p.m. PT on July 7, 2024 - 12:00 a.m. PT on July 8, 2024 – 11:59 p.m. PT on July 14, 2024   Entries will be eligible for the Entry Period in which they are received and will not carryover to subsequent weekly entry periods.  You must enter into each weekly Entry Period separately.   How to Enter: We invite you to participate in a quest to provide "Accepted Solutions" to as many questions as you can. Answers can be provided in all the communities. Users must provide a solution which can be an “Accepted Solution” in the Forums in all of the communities and there are no limits to the number of “Accepted Solutions” that a member can provide for entries in this challenge, but each entry must be substantially unique and different.    Winner Selection and Prizes: At the end of each week, we will list the top ten (10) Community users which will consist of: 5 Community Members & 5 Super Users and they will advance to the final drawing. We will post each week in the News & Announcements the top 10 Solution providers.  At the end of the challenge, we will add all of the top 10 weekly names and enter them into a random drawing.  Then we will randomly select ten (10) winners (5 Community Members & 5 Super Users) from among all eligible entrants received across all weekly Entry Periods to receive the prize listed below. If a winner declines, we will draw again at random for the next winner.  A user will only be able to win once overall. If they are drawn multiple times, another user will be drawn at random.  Individuals will be contacted before the announcement with the opportunity to claim or deny the prize.  Once all of the winners have been notified, we will post in the News & Announcements of each community with the list of winners.   Each winner will receive one (1) Pass to the Power Platform Conference in Las Vegas, Sep. 18-20, 2024 ($1800 value). NOTE: Prize is for conference attendance only and any other costs such as airfare, lodging, transportation, and food are the sole responsibility of the winner. Tickets are not transferable to any other party or to next year’s event.   ** PLEASE SEE THE ATTACHED RULES for this CHALLENGE**   Week 1 Results: Congratulations to the Week 1 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge.   Community MembersNumber SolutionsSuper UsersNumber Solutions Deenuji 9 @NathanAlvares24  17 @Anil_g  7 @ManishSolanki  13 @eetuRobo  5 @David_MA  10 @VishnuReddy1997  5 @SpongYe  9JhonatanOB19932 (tie) @Nived_Nambiar  8 @maltie  2 (tie)   @PA-Noob  2 (tie)   @LukeMcG  2 (tie)   @tgut03  2 (tie)       Week 2 Results: Congratulations to the Week 2 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 2: Community MembersSolutionsSuper UsersSolutionsPower Automate  @Deenuji  12@ManishSolanki 19 @Anil_g  10 @NathanAlvares24  17 @VishnuReddy1997  6 @Expiscornovus  10 @Tjan  5 @Nived_Nambiar  10 @eetuRobo  3 @SudeepGhatakNZ 8     Week 3 Results: Congratulations to the Week 3 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 3:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji32ManishSolanki55VishnuReddy199724NathanAlvares2444Anil_g22SudeepGhatakNZ40eetuRobo18Nived_Nambiar28Tjan8David_MA22   Week 4 Results: Congratulations to the Week 4 qualifiers, you are being entered in the random drawing that will take place at the end of the challenge. Week 4:Community MembersSolutionsSuper UsersSolutionsPower Automate Deenuji11FLMike31Sayan11ManishSolanki16VishnuReddy199710creativeopinion14Akshansh-Sharma3SudeepGhatakNZ7claudiovc2CFernandes5 misc2Nived_Nambiar5 Usernametwice232rzaneti5 eetuRobo2   Anil_g2   SharonS2  

Check Out | 2024 Release Wave 2 Plans for Microsoft Dynamics 365 and Microsoft Power Platform

On July 16, 2024, we published the 2024 release wave 2 plans for Microsoft Dynamics 365 and Microsoft Power Platform. These plans are a compilation of the new capabilities planned to be released between October 2024 to March 2025. This release introduces a wealth of new features designed to enhance customer understanding and improve overall user experience, showcasing our dedication to driving digital transformation for our customers and partners.    The upcoming wave is centered around utilizing advanced AI and Microsoft Copilot technologies to enhance user productivity and streamline operations across diverse business applications. These enhancements include intelligent automation, AI-powered insights, and immersive user experiences that are designed to break down barriers between data, insights, and individuals. Watch a summary of the release highlights.    Discover the latest features that empower organizations to operate more efficiently and adaptively. From AI-driven sales insights and customer service enhancements to predictive analytics in supply chain management and autonomous financial processes, the new capabilities enable businesses to proactively address challenges and capitalize on opportunities.    

Updates to Transitions in the Power Platform Communities

We're embarking on a journey to enhance your experience by transitioning to a new community platform. Our team has been diligently working to create a fresh community site, leveraging the very Dynamics 365 and Power Platform tools our community advocates for.  We started this journey with transitioning Copilot Studio forums and blogs in June. The move marks the beginning of a new chapter, and we're eager for you to be a part of it. The rest of the Power Platform product sites will be moving over this summer.   Stay tuned for more updates as we get closer to the launch. We can't wait to welcome you to our new community space, designed with you in mind. Let's connect, learn, and grow together.   Here's to new beginnings and endless possibilities!   If you have any questions, observations or concerns throughout this process please go to https://aka.ms/PPCommSupport.   To stay up to date on the latest details of this migration and other important Community updates subscribe to our News and Announcements forums: Copilot Studio, Power Apps, Power Automate, Power Pages

Users online (4,229)