cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Seuadr
Helper IV
Helper IV

Sharepoint get item/update item with conditional check - makes an entry for each item in the list?

Hi all, 

 

I'm working on a flow that takes email alarm messages.

 

here is an example "single message" email:

 

Thursday, 04/08/2021 at 14:14:24. The Point ANT HVAC4B.DISCH AIR is at NORMAL.


here is how it is set up:

 

Trigger is a new email, then i get a list of items from the sharepoint, then compare the subject of the email to branch yes is "multiple messages" no is "single message":

Seuadr_0-1617909042847.png

now - i have the same problem with multiple or single, so, i'm going to stick to single for this explanation cause it is simpler:

Seuadr_1-1617909147870.png

split on the splits the message in two at 'Point', then step1 trims it so it becomes:

ANT HVAC4B.DISCH AIR is at NORMAL.

then the compose action which i neglected to name splits that at is to give:

ANT HVAC4B.DISCH AIR

 

i then use the get value to compare the Title of the entry, to the output of the compose to see if the entry starts with it:

 

if it does, then, get the id of that entry and update the item with the step1 compose, if it does not, then create the item with the step1 compose:

Seuadr_3-1617909453004.png

 

Seuadr_2-1617909395087.png

in this particular case, it does match, but, as you can see from an earlier run, it had a create instead of an update and this is where things go beyond my intention: it creates a new entry for each existing list item - i just want it to create a new entry once. I think it is because of the "Apply to each 3", but, when i add the id to the "yes" branch it automatically nests it in the apply to each.

 

here is the output from the item that created 4 entries instead of 1:

output from the email trigger:
"receivedDateTime":"2021-04-08T19:06:46+00:00","hasAttachments":false,"internetMessageId":"<BL0PR12MB25314BB7D5C97684A4D4A2A4A8749@BL0PR12MB2531.namprd12.prod.outlook.com>","subject":"Thursday, 04/08/2021 at 09:40:18. The Point ANT CHW.CW PUMP ALARM is at NORMAL.","bodyPreview":"Thursday, 04/08/2021 at 09:40:18. The Point ANT CHW.CW PUMP ALARM is at NORMAL.","importance":"normal","conversationId":"AAQkAGJlZDM0NDk4LTUxODYtNDI0Ny1iMjM3LTRjZTgzYjA2NTE5NAAQAI2KcB07AjdFtSMmwslPAjI=","isRead":false,"isHtml":false,"body":"Thursday, 04/08/2021 at 09:40:18. The Point ANT CHW.CW PUMP ALARM is at NORMAL.\r\n\r\n\r\n","from":"IPF.SA.HVACFlow@msu.edu","toRecipients":"IPF.SA.HVACFlow@msu.edu"

Seuadr_4-1617909734333.png

Seuadr_5-1617909752792.png

Seuadr_6-1617909796762.png

so it does it 4 times, because there were 4 items in the list when it did the "apply to each 3" action.

not sure what to do differently to get it to iterate through the list (ultimately, there are likely to be hundreds of entries at any given time once this is live) but only create 1 entry, not a new item on every iteration?

i thought about relocating the get items, but, i need that to do the conditional check, so i'm not sure how i'd make that work?

 

any input would be great

 

1 ACCEPTED SOLUTION

Accepted Solutions

Hi @Seuadr 

 

Have your condition after the filter.  If the length gt 0 i.e. YES then update, else NO create new?

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here

View solution in original post

16 REPLIES 16
DamoBird365
Employee
Employee

Hi @Seuadr 

 

I'm guessing the real problem is your expression?  1 should evaulate as false and the rest true but all 4 are evaluating as false and therefore creating a new item?

 

I would suggest you stick a compose in temporarily for the apply to each 3 title and see what string is output (as you cannot see this from the condition history).  Then I would compare your select string and the title string with your own eye and try and spot the difference?  An extra space or maybe case?  You can change the case of both strings to upper or lower (ToLower or ToUpper).

 

Give that a go and let me know what you find.

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here

i'll give that a try - i now have 10 items in the list, so the next message that doesn't exist in the list will make 10 entries 😕

Seuadr
Helper IV
Helper IV

@DamoBird365 So i tried putting a compose between the create and updates in the apply to each and it is as i suspected, it is checking each item to see if it matches with the "title" from "get items" and if it doesn't, then it is creating it. I am pretty sure it is because it is inside the apply for each, but, if the condition is no, i do want the item to be added once, so, i'm not sure how to make it check ALL of the list items and only add it once instead of checking each list item?

Seuadr
Helper IV
Helper IV

so, to expand on this - my expression is "starts with" - here is a run with 2 list items.. item 1:

Seuadr_0-1617967835533.png

no match, create an item.

item 2:

Seuadr_1-1617967883239.png

match, update item.
now here is a run with 3 list items - this is a new item, so no update:

Seuadr_2-1617968014876.png

 

Seuadr_3-1617968039051.png

 

Seuadr_4-1617968060271.png

 

because it checked 3 items, it created 3 items. not sure how to have it check the entire list and only create 1 item?

 

DamoBird365
Employee
Employee

Hi @Seuadr 

 

I think I get you now.  Instead of an apply to each, how about a filter.  If the filter contains a match the length will be greater than 0.  The condition is therefore based on the length rather than each item of the list.

 

Does that work for you?

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here

 

 

i'll look in to that after this power platform training. that sounds like something that makes a lot of sense. 

 

if i am following you correctly, i'd put the get items into a filter like the data "filter array" and then have the condition do a match there? 

Seuadr
Helper IV
Helper IV

@DamoBird365 finally got back to this - i am structuring my filter was wrong and was hoping that you could give me some input:

Seuadr_0-1618230181889.png

so my "value"  from is output('Get_items')?['body/value']
the filter uses item()?['Title'] - which is the entry on the list i'm looking to filter

then starts with outputs('Compose') which is the compose action that strips it down to just the first part of the split for comparison (which is what it starts with...)

so, for my test run, my inputs from the sharepoint list are:

data.etag": "\"1\"",
        "ItemInternalId": "2520",
        "ID": 2520,
        "Title": "ANT REF 1330 MEAT POULTRY is in Alarm at PRI3",
        "Timestamp": "2021-04-12T12:00:00Z",
        "Modified": "2021-04-12T12:12:54Z",
        "Created": "2021-04-12T12:12:54Z",

"@odata.etag": "\"1\"",
        "ItemInternalId": "2521",
        "ID": 2521,
        "Title": "ANT REF 1330 MEAT POULTRY is in Alarm at PRI3.",
        "Timestamp": "2021-04-12T12:01:44Z",
        "Modified": "2021-04-12T12:18:12Z",
        "Created": "2021-04-12T12:18:12Z",


and my compose was:
ANT RM 1330.RM TEMP

 

but my output from the filter was:

[ ]

 

and since the input to the condition following for length doesn't trigger because (presumably) it has a null?

Seuadr_1-1618230597547.png

 

@Seuadr I cannot see a title in your example starting with ANT RM 1330.RM TEMP

right, so if it isn't in the list, i need to create the item.

so i need to figure out how to work with that

Hi @Seuadr 

 

Have your condition after the filter.  If the length gt 0 i.e. YES then update, else NO create new?

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here

@DamoBird365 that is what i have - but, for some reason the condition isn't triggering - i presumed it was because the array is returning [ ]

Seuadr_1-1618233917517.png

 

not sure what i am doing wrong?

Hi @Seuadr 

 

Not sure if we are misunderstanding each other here but if you are now using a filter on the results, you don't need to use an apply to each to check them all?  The filter will let you know if there is a match or not and so the condition and the yes no branches do not need to be in an apply to each?  Why are you creating an apply to each with the body as the source?

 

Damien

when i add the ID from get_items it automatically nests it in an apply to each - i have to add the id to update item, so, :shrugs:

 

Seuadr_0-1618234456853.png

 

Hi @Seuadr 

 

You will be using the dynamic content ID from the Get Items, in which case it will automatically assume an apply to each as the result is an array?  If the length is greater than 0 your filter array should have the ID e.g. 2520, you can obtain this with the expression first(body('Filter_array')?['Id']), you might get away with body('Filter_array')?['Id'].

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here

@DamoBird365 i am getting an error when trying to add the expression:

Flow save failed with code 'InvalidTemplate' and message 'The template validation failed: 'The inputs of template action 'Compose_3' at line '1 and column '5795' cannot reference action 'Filter_array'. Action 'Filter_array' must either be in 'runAfter' path or within a scope action on the 'runAfter' path of action 'Compose_3', or be a Trigger.'.'.

compose_3 was the compose i put in to "see" the output of the expression before putting it in the update item. 

 

i may be misunderstanding, but, compose 3 is under the yes of the conditional check for length, i don't understand how i could have the filter array in the run after path for that? i also can't add the expression directly to the id, nor a dynamic content from the filter array to the id.

 

i feel like based on your description this should be straight forward and i'm missing something?

Seuadr
Helper IV
Helper IV

oddly enough, i deleted it and re-added it as a new compose and now it is happy? whatever i guess 😄

 

Helpful resources

Announcements

Take a short Community User Survey | Help us make your experience better!

To ensure that we are providing the best possible experience for Community members, we want to hear from you!    We value your feedback! As part of our commitment to enhancing your experience, we invite you to participate in a brief 15-question survey. Your insights will help us improve our services and better serve the community.    👉Community User Survey    Thank you for being an essential part of our community!    Power Platform Engagement Team  

Tuesday Tip | How to Get Community Support

It's time for another Tuesday Tip, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.       This Week: All About Community Support Whether you're a seasoned community veteran or just getting started, you may need a bit of help from time to time! If you need to share feedback with the Community Engagement team about the community or are looking for ways we can assist you with user groups, events, or something else, Community Support is the place to start.   Community Support is part of every one of our communities, accessible to all our community members.   Within each community's Community Support page, you'll find three distinct areas, each with a different focus to help you when you need support from us most. Power Apps: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pa_community_support Power Automate: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpa_community_support Power Pages: https://powerusers.microsoft.com/t5/Community-Support/ct-p/mpp_community_support Copilot Studio: https://powerusers.microsoft.com/t5/Community-Support/ct-p/pva_community-support   Community Support Form If you need more assistance, you can reach out to the Community Team via the Community support form. Choose the type of support you require and fill in the form accordingly. We will respond to you promptly.    Thank you for being an active part of our community. Your contributions make a difference!   Best Regards, The Community Management Team

Community Roundup: A Look Back at Our Last 10 Tuesday Tips

As we continue to grow and learn together, it's important to reflect on the valuable insights we've shared. For today's #TuesdayTip, we're excited to take a moment to look back at the last 10 tips we've shared in case you missed any or want to revisit them. Thanks for your incredible support for this series--we're so glad it was able to help so many of you navigate your community experience!   Getting Started in the Community An overview of everything you need to know about navigating the community on one page!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Ranks and YOU Have you ever wondered how your fellow community members ascend the ranks within our community? We explain everything about ranks and how to achieve points so you can climb up in the rankings! Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Powering Up Your Community Profile Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile. Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Community Blogs--A Great Place to Start There's so much you'll discover in the Community Blogs, and we hope you'll check them out today!  Community Links: ○ Power Apps ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Unlocking Community Achievements and Earning Badges Across the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. Check out some details on Community badges--and find out more in the detailed link at the end of the article! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio    Blogging in the Community Interested in blogging? Everything you need to know on writing blogs in our four communities! Get started blogging across the Power Platform communities today! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Subscriptions & Notifications We don't want you to miss a thing in the community! Read all about how to subscribe to sections of our forums and how to setup your notifications! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Getting Started with Private Messages & Macros Do you want to enhance your communication in the Community and streamline your interactions? One of the best ways to do this is to ensure you are using Private Messaging--and the ever-handy macros that are available to you as a Community member! Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Community User Groups Learn everything about being part of, starting, or leading a User Group in the Power Platform Community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Update Your Community Profile Today! Keep your community profile up to date which is essential for staying connected and engaged with the community. Community Links: ○ Power Apps  ○ Power Automate  ○ Power Pages  ○ Copilot Studio   Thank you for being an integral part of our journey.   Here's to many more Tuesday Tips as we pave the way for a brighter, more connected future! As always, watch the News & Announcements for the next set of tips, coming soon!    

Calling all User Group Leaders and Super Users! Mark Your Calendars for the next Community Ambassador Call on May 9th!

This month's Community Ambassador call is on May 9th at 9a & 3p PDT. Please keep an eye out in your private messages and Teams channels for your invitation. There are lots of exciting updates coming to the Community, and we have some exclusive opportunities to share with you! As always, we'll also review regular updates for User Groups, Super Users, and share general information about what's going on in the Community.     Be sure to register & we hope to see all of you there!

April 2024 Community Newsletter

We're pleased to share the April Community Newsletter, where we highlight the latest news, product releases, upcoming events, and the amazing work of our outstanding Community members.   If you're new to the Community, please make sure to follow the latest News & Announcements and check out the Community on LinkedIn as well! It's the best way to stay up-to-date with all the news from across Microsoft Power Platform and beyond.    COMMUNITY HIGHLIGHTS   Check out the most active community members of the last month! These hardworking members are posting regularly, answering questions, kudos, and providing top solutions in their communities. We are so thankful for each of you--keep up the great work! If you hope to see your name here next month, follow these awesome community members to see what they do!   Power AppsPower AutomateCopilot StudioPower PagesWarrenBelzDeenujialexander2523ragavanrajanLaurensMManishSolankiMattJimisonLucas001AmikcapuanodanilostephenrobertOliverRodriguestimlAndrewJManikandanSFubarmmbr1606VishnuReddy1997theMacResolutionsVishalJhaveriVictorIvanidzejsrandhawahagrua33ikExpiscornovusFGuerrero1PowerAddictgulshankhuranaANBExpiscornovusprathyooSpongYeNived_Nambiardeeksha15795apangelesGochixgrantjenkinsvasu24Mfon   LATEST NEWS   Business Applications Launch Event - On Demand In case you missed the Business Applications Launch Event, you can now catch up on all the announcements and watch the entire event on-demand inside Charles Lamanna's latest cloud blog.   This is your one stop shop for all the latest Copilot features across Power Platform and #Dynamics365, including first-hand looks at how companies such as Lenovo, Sonepar, Ford Motor Company, Omnicom and more are using these new capabilities in transformative ways. Click the image below to watch today!   Power Platform Community Conference 2024 is here! It's time to look forward to the next installment of the Power Platform Community Conference, which takes place this year on 18-20th September 2024 at the MGM Grand in Las Vegas!   Come and be inspired by Microsoft senior thought leaders and the engineers behind the #PowerPlatform, with Charles Lamanna, Sangya Singh, Ryan Cunningham, Kim Manis, Nirav Shah, Omar Aftab and Leon Welicki already confirmed to speak. You'll also be able to learn from industry experts and Microsoft MVPs who are dedicated to bridging the gap between humanity and technology. These include the likes of Lisa Crosbie, Victor Dantas, Kristine Kolodziejski, David Yack, Daniel Christian, Miguel Félix, and Mats Necker, with many more to be announced over the coming weeks.   Click here to watch our brand-new sizzle reel for #PPCC24 or click the image below to find out more about registration. See you in Vegas!       Power Up Program Announces New Video-Based Learning Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram. These include a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the image below to find out more!   UPCOMING EVENTS Microsoft Build - Seattle and Online - 21-23rd May 2024 Taking place on 21-23rd May 2024 both online and in Seattle, this is the perfect event to learn more about low code development, creating copilots, cloud platforms, and so much more to help you unleash the power of AI.   There's a serious wealth of talent speaking across the three days, including the likes of Satya Nadella, Amanda K. Silver, Scott Guthrie, Sarah Bird, Charles Lamanna, Miti J., Kevin Scott, Asha Sharma, Rajesh Jha, Arun Ulag, Clay Wesener, and many more.   And don't worry if you can't make it to Seattle, the event will be online and totally free to join. Click the image below to register for #MSBuild today!   European Collab Summit - Germany - 14-16th May 2024 The clock is counting down to the amazing European Collaboration Summit, which takes place in Germany May 14-16, 2024. #CollabSummit2024 is designed to provide cutting-edge insights and best practices into Power Platform, Microsoft 365, Teams, Viva, and so much more. There's a whole host of experts speakers across the three-day event, including the likes of Vesa Juvonen, Laurie Pottmeyer, Dan Holme, Mark Kashman, Dona Sarkar, Gavin Barron, Emily Mancini, Martina Grom, Ahmad Najjar, Liz Sundet, Nikki Chapple, Sara Fennah, Seb Matthews, Tobias Martin, Zoe Wilson, Fabian Williams, and many more.   Click the image below to find out more about #ECS2024 and register today!     Microsoft 365 & Power Platform Conference - Seattle - 3-7th June If you're looking to turbo boost your Power Platform skills this year, why not take a look at everything TechCon365 has to offer at the Seattle Convention Center on June 3-7, 2024.   This amazing 3-day conference (with 2 optional days of workshops) offers over 130 sessions across multiple tracks, alongside 25 workshops presented by Power Platform, Microsoft 365, Microsoft Teams, Viva, Azure, Copilot and AI experts. There's a great array of speakers, including the likes of Nirav Shah, Naomi Moneypenny, Jason Himmelstein, Heather Cook, Karuana Gatimu, Mark Kashman, Michelle Gilbert, Taiki Y., Kristi K., Nate Chamberlain, Julie Koesmarno, Daniel Glenn, Sarah Haase, Marc Windle, Amit Vasu, Joanne C Klein, Agnes Molnar, and many more.   Click the image below for more #Techcon365 intel and register today!     For more events, click the image below to visit the Microsoft Community Days website.      

Tuesday Tip | Update Your Community Profile Today!

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   We're excited to announce that updating your community profile has never been easier! Keeping your profile up to date is essential for staying connected and engaged with the community.   Check out the following Support Articles with these topics: Accessing Your Community ProfileRetrieving Your Profile URLUpdating Your Community Profile Time ZoneChanging Your Community Profile Picture (Avatar)Setting Your Date Display Preferences Click on your community link for more information: Power Apps, Power Automate, Power Pages, Copilot Studio   Thank you for being an active part of our community. Your contributions make a difference! Best Regards, The Community Management Team

Users online (2,622)