cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Seuadr
Helper IV
Helper IV

Sharepoint get item/update item with conditional check - makes an entry for each item in the list?

Hi all, 

 

I'm working on a flow that takes email alarm messages.

 

here is an example "single message" email:

 

Thursday, 04/08/2021 at 14:14:24. The Point ANT HVAC4B.DISCH AIR is at NORMAL.


here is how it is set up:

 

Trigger is a new email, then i get a list of items from the sharepoint, then compare the subject of the email to branch yes is "multiple messages" no is "single message":

Seuadr_0-1617909042847.png

now - i have the same problem with multiple or single, so, i'm going to stick to single for this explanation cause it is simpler:

Seuadr_1-1617909147870.png

split on the splits the message in two at 'Point', then step1 trims it so it becomes:

ANT HVAC4B.DISCH AIR is at NORMAL.

then the compose action which i neglected to name splits that at is to give:

ANT HVAC4B.DISCH AIR

 

i then use the get value to compare the Title of the entry, to the output of the compose to see if the entry starts with it:

 

if it does, then, get the id of that entry and update the item with the step1 compose, if it does not, then create the item with the step1 compose:

Seuadr_3-1617909453004.png

 

Seuadr_2-1617909395087.png

in this particular case, it does match, but, as you can see from an earlier run, it had a create instead of an update and this is where things go beyond my intention: it creates a new entry for each existing list item - i just want it to create a new entry once. I think it is because of the "Apply to each 3", but, when i add the id to the "yes" branch it automatically nests it in the apply to each.

 

here is the output from the item that created 4 entries instead of 1:

output from the email trigger:
"receivedDateTime":"2021-04-08T19:06:46+00:00","hasAttachments":false,"internetMessageId":"<BL0PR12MB25314BB7D5C97684A4D4A2A4A8749@BL0PR12MB2531.namprd12.prod.outlook.com>","subject":"Thursday, 04/08/2021 at 09:40:18. The Point ANT CHW.CW PUMP ALARM is at NORMAL.","bodyPreview":"Thursday, 04/08/2021 at 09:40:18. The Point ANT CHW.CW PUMP ALARM is at NORMAL.","importance":"normal","conversationId":"AAQkAGJlZDM0NDk4LTUxODYtNDI0Ny1iMjM3LTRjZTgzYjA2NTE5NAAQAI2KcB07AjdFtSMmwslPAjI=","isRead":false,"isHtml":false,"body":"Thursday, 04/08/2021 at 09:40:18. The Point ANT CHW.CW PUMP ALARM is at NORMAL.\r\n\r\n\r\n","from":"IPF.SA.HVACFlow@msu.edu","toRecipients":"IPF.SA.HVACFlow@msu.edu"

Seuadr_4-1617909734333.png

Seuadr_5-1617909752792.png

Seuadr_6-1617909796762.png

so it does it 4 times, because there were 4 items in the list when it did the "apply to each 3" action.

not sure what to do differently to get it to iterate through the list (ultimately, there are likely to be hundreds of entries at any given time once this is live) but only create 1 entry, not a new item on every iteration?

i thought about relocating the get items, but, i need that to do the conditional check, so i'm not sure how i'd make that work?

 

any input would be great

 

1 ACCEPTED SOLUTION

Accepted Solutions

Hi @Seuadr 

 

Have your condition after the filter.  If the length gt 0 i.e. YES then update, else NO create new?

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here

View solution in original post

16 REPLIES 16
DamoBird365
Employee
Employee

Hi @Seuadr 

 

I'm guessing the real problem is your expression?  1 should evaulate as false and the rest true but all 4 are evaluating as false and therefore creating a new item?

 

I would suggest you stick a compose in temporarily for the apply to each 3 title and see what string is output (as you cannot see this from the condition history).  Then I would compare your select string and the title string with your own eye and try and spot the difference?  An extra space or maybe case?  You can change the case of both strings to upper or lower (ToLower or ToUpper).

 

Give that a go and let me know what you find.

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here

i'll give that a try - i now have 10 items in the list, so the next message that doesn't exist in the list will make 10 entries 😕

Seuadr
Helper IV
Helper IV

@DamoBird365 So i tried putting a compose between the create and updates in the apply to each and it is as i suspected, it is checking each item to see if it matches with the "title" from "get items" and if it doesn't, then it is creating it. I am pretty sure it is because it is inside the apply for each, but, if the condition is no, i do want the item to be added once, so, i'm not sure how to make it check ALL of the list items and only add it once instead of checking each list item?

Seuadr
Helper IV
Helper IV

so, to expand on this - my expression is "starts with" - here is a run with 2 list items.. item 1:

Seuadr_0-1617967835533.png

no match, create an item.

item 2:

Seuadr_1-1617967883239.png

match, update item.
now here is a run with 3 list items - this is a new item, so no update:

Seuadr_2-1617968014876.png

 

Seuadr_3-1617968039051.png

 

Seuadr_4-1617968060271.png

 

because it checked 3 items, it created 3 items. not sure how to have it check the entire list and only create 1 item?

 

DamoBird365
Employee
Employee

Hi @Seuadr 

 

I think I get you now.  Instead of an apply to each, how about a filter.  If the filter contains a match the length will be greater than 0.  The condition is therefore based on the length rather than each item of the list.

 

Does that work for you?

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here

 

 

i'll look in to that after this power platform training. that sounds like something that makes a lot of sense. 

 

if i am following you correctly, i'd put the get items into a filter like the data "filter array" and then have the condition do a match there? 

Seuadr
Helper IV
Helper IV

@DamoBird365 finally got back to this - i am structuring my filter was wrong and was hoping that you could give me some input:

Seuadr_0-1618230181889.png

so my "value"  from is output('Get_items')?['body/value']
the filter uses item()?['Title'] - which is the entry on the list i'm looking to filter

then starts with outputs('Compose') which is the compose action that strips it down to just the first part of the split for comparison (which is what it starts with...)

so, for my test run, my inputs from the sharepoint list are:

data.etag": "\"1\"",
        "ItemInternalId": "2520",
        "ID": 2520,
        "Title": "ANT REF 1330 MEAT POULTRY is in Alarm at PRI3",
        "Timestamp": "2021-04-12T12:00:00Z",
        "Modified": "2021-04-12T12:12:54Z",
        "Created": "2021-04-12T12:12:54Z",

"@odata.etag": "\"1\"",
        "ItemInternalId": "2521",
        "ID": 2521,
        "Title": "ANT REF 1330 MEAT POULTRY is in Alarm at PRI3.",
        "Timestamp": "2021-04-12T12:01:44Z",
        "Modified": "2021-04-12T12:18:12Z",
        "Created": "2021-04-12T12:18:12Z",


and my compose was:
ANT RM 1330.RM TEMP

 

but my output from the filter was:

[ ]

 

and since the input to the condition following for length doesn't trigger because (presumably) it has a null?

Seuadr_1-1618230597547.png

 

@Seuadr I cannot see a title in your example starting with ANT RM 1330.RM TEMP

right, so if it isn't in the list, i need to create the item.

so i need to figure out how to work with that

Hi @Seuadr 

 

Have your condition after the filter.  If the length gt 0 i.e. YES then update, else NO create new?

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here

@DamoBird365 that is what i have - but, for some reason the condition isn't triggering - i presumed it was because the array is returning [ ]

Seuadr_1-1618233917517.png

 

not sure what i am doing wrong?

Hi @Seuadr 

 

Not sure if we are misunderstanding each other here but if you are now using a filter on the results, you don't need to use an apply to each to check them all?  The filter will let you know if there is a match or not and so the condition and the yes no branches do not need to be in an apply to each?  Why are you creating an apply to each with the body as the source?

 

Damien

when i add the ID from get_items it automatically nests it in an apply to each - i have to add the id to update item, so, :shrugs:

 

Seuadr_0-1618234456853.png

 

Hi @Seuadr 

 

You will be using the dynamic content ID from the Get Items, in which case it will automatically assume an apply to each as the result is an array?  If the length is greater than 0 your filter array should have the ID e.g. 2520, you can obtain this with the expression first(body('Filter_array')?['Id']), you might get away with body('Filter_array')?['Id'].

 

If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.
Cheers,
Damien


P.S. take a look at my new blog here

@DamoBird365 i am getting an error when trying to add the expression:

Flow save failed with code 'InvalidTemplate' and message 'The template validation failed: 'The inputs of template action 'Compose_3' at line '1 and column '5795' cannot reference action 'Filter_array'. Action 'Filter_array' must either be in 'runAfter' path or within a scope action on the 'runAfter' path of action 'Compose_3', or be a Trigger.'.'.

compose_3 was the compose i put in to "see" the output of the expression before putting it in the update item. 

 

i may be misunderstanding, but, compose 3 is under the yes of the conditional check for length, i don't understand how i could have the filter array in the run after path for that? i also can't add the expression directly to the id, nor a dynamic content from the filter array to the id.

 

i feel like based on your description this should be straight forward and i'm missing something?

Seuadr
Helper IV
Helper IV

oddly enough, i deleted it and re-added it as a new compose and now it is happy? whatever i guess 😄

 

Helpful resources

Announcements

Celebrating the May Super User of the Month: Laurens Martens

  @LaurensM  is an exceptional contributor to the Power Platform Community. Super Users like Laurens inspire others through their example, encouragement, and active participation. We are excited to celebrated Laurens as our Super User of the Month for May 2024.   Consistent Engagement:  He consistently engages with the community by answering forum questions, sharing insights, and providing solutions. Laurens dedication helps other users find answers and overcome challenges.   Community Expertise: As a Super User, Laurens plays a crucial role in maintaining a knowledge sharing environment. Always ensuring a positive experience for everyone.   Leadership: He shares valuable insights on community growth, engagement, and future trends. Their contributions help shape the Power Platform Community.   Congratulations, Laurens Martens, for your outstanding work! Keep inspiring others and making a difference in the community!   Keep up the fantastic work!        

Check out the Copilot Studio Cookbook today!

We are excited to announce our new Copilot Cookbook Gallery in the Copilot Studio Community. We can't wait for you to share your expertise and your experience!    Join us for an amazing opportunity where you'll be one of the first to contribute to the Copilot Cookbook—your ultimate guide to mastering Microsoft Copilot. Whether you're seeking inspiration or grappling with a challenge while crafting apps, you probably already know that Copilot Cookbook is your reliable assistant, offering a wealth of tips and tricks at your fingertips--and we want you to add your expertise. What can you "cook" up?   Click this link to get started: https://aka.ms/CS_Copilot_Cookbook_Gallery   Don't miss out on this exclusive opportunity to be one of the first in the Community to share your app creation journey with Copilot. We'll be announcing a Cookbook Challenge very soon and want to make sure you one of the first "cooks" in the kitchen.   Don't miss your moment--start submitting in the Copilot Cookbook Gallery today!     Thank you,  Engagement Team

Announcing Power Apps Copilot Cookbook Gallery

We are excited to share that the all-new Copilot Cookbook Gallery for Power Apps is now available in the Power Apps Community, full of tips and tricks on how to best use Microsoft Copilot as you develop and create in Power Apps. The new Copilot Cookbook is your go-to resource when you need inspiration--or when you're stuck--and aren't sure how to best partner with Copilot while creating apps.   Whether you're looking for the best prompts or just want to know about responsible AI use, visit Copilot Cookbook for regular updates you can rely on--while also serving up some of your greatest tips and tricks for the Community. Check Out the new Copilot Cookbook for Power Apps today: Copilot Cookbook - Power Platform Community.  We can't wait to see what you "cook" up!    

Welcome to the Power Automate Community

You are now a part of a fast-growing vibrant group of peers and industry experts who are here to network, share knowledge, and even have a little fun.   Now that you are a member, you can enjoy the following resources:   Welcome to the Community   News & Announcements: The is your place to get all the latest news around community events and announcements. This is where we share with the community what is going on and how to participate.  Be sure to subscribe to this board and not miss an announcement.   Get Help with Power Automate Forums: If you're looking for support with any part of Power Automate, our forums are the place to go. From General Power Automate forums to Using Connectors, Building Flows and Using Flows.  You will find thousands of technical professionals, and Super Users with years of experience who are ready and eager to answer your questions. You now have the ability to post, reply and give "kudos" on the Power Automate community forums. Make sure you conduct a quick search before creating a new post because your question may have already been asked and answered. Galleries: The galleries are full of content and can assist you with information on creating a flow in our Webinars and Video Gallery, and the ability to share the flows you have created in the Power Automate Cookbook.  Stay connected with the Community Connections & How-To Videos from the Microsoft Community Team. Check out the awesome content being shared there today.   Power Automate Community Blog: Over the years, more than 700 Power Automate Community Blog articles have been written and published by our thriving community. Our community members have learned some excellent tips and have keen insights on the future of process automation. In the Power Automate Community Blog, you can read the latest Power Automate-related posts from our community blog authors around the world. Let us know if you'd like to become an author and contribute your own writing — everything Power Automate-related is welcome.   Community Support: Check out and learn more about Using the Community for tips & tricks. Let us know in the Community Feedback  board if you have any questions or comments about your community experience. Again, we are so excited to welcome you to the Microsoft Power Automate community family. Whether you are brand new to the world of process automation or you are a seasoned Power Automate veteran - our goal is to shape the community to be your 'go to' for support, networking, education, inspiration and encouragement as we enjoy this adventure together.     Power Automate Community Team

Hear what's next for the Power Up Program

Hear from Principal Program Manager, Dimpi Gandhi, to discover the latest enhancements to the Microsoft #PowerUpProgram, including a new accelerated video-based curriculum crafted with the expertise of Microsoft MVPs, Rory Neary and Charlie Phipps-Bennett. If you’d like to hear what’s coming next, click the link below to sign up today! https://aka.ms/PowerUp  

Tuesday Tip | How to Report Spam in Our Community

It's time for another TUESDAY TIPS, your weekly connection with the most insightful tips and tricks that empower both newcomers and veterans in the Power Platform Community! Every Tuesday, we bring you a curated selection of the finest advice, distilled from the resources and tools in the Community. Whether you’re a seasoned member or just getting started, Tuesday Tips are the perfect compass guiding you across the dynamic landscape of the Power Platform Community.   As our community family expands each week, we revisit our essential tools, tips, and tricks to ensure you’re well-versed in the community’s pulse. Keep an eye on the News & Announcements for your weekly Tuesday Tips—you never know what you may learn!   Today's Tip: How to Report Spam in Our Community We strive to maintain a professional and helpful community, and part of that effort involves keeping our platform free of spam. If you encounter a post that you believe is spam, please follow these steps to report it: Locate the Post: Find the post in question within the community.Kebab Menu: Click on the "Kebab" menu | 3 Dots, on the top right of the post.Report Inappropriate Content: Select "Report Inappropriate Content" from the menu.Submit Report: Fill out any necessary details on the form and submit your report.   Our community team will review the report and take appropriate action to ensure our community remains a valuable resource for everyone.   Thank you for helping us keep the community clean and useful!

Users online (4,649)