cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
ahowes
Helper I
Helper I

Simple? Trigger and copy item to another list flow not working

Hi all-

My first time building a trigger-filtered flow. I have a calculated yes/no field that successfully changes to yes when conditions are met in a new entry to a list.

I built the trigger @equals(triggerBody()?['RunAutomation'],true and then a create new item step going to the destination list. It does not seem to run even when the RunAutomation field shows YES. 

Everything else in the Trigger settings fields was left at the default.

I'd include a screenshot, but cannot figure out how to insert the image.

Thanks!

2 ACCEPTED SOLUTIONS

Accepted Solutions

Hi @ahowes,

 

I tried to reproduce your Flow, created a yes/no column named "NeedAdditionalTeam", and set condition in the "When an item is created or modified" trigger, and it works correctly:

Annotation 2020-05-04 150709.png

 

Annotation 2020-05-04 150722.pngAnnotation 2020-05-04 150518.png

 

And I also tried "When an item is created" trigger, it could work, too.

 

I assume the reason for the Flow not fired is caused by the column name not correct, if a column's name was modified, the column's system name wouldn't be changed. When you use it, it should be a system name, you could check its system name in the column detail page and extract it from URL:

Annotation 2020-05-04 151412.png

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

 

View solution in original post

@v-litu-msft @abm , thanks so much for your help! 

 

Here is what solved the issue...makes no sense to me, but it worked 🙂


My typo was in my post here, not in the workings of my workflow or the column name, so that wasn't the issue. I was using the correct column name in all of the workflows I attempted and even tried yet another new column. Still didn't work.

 

Solution:

I eliminated the column from the list. I built another new yes/no column named "AdditionalTeam". I deleted my previous workflows and started from scratch, except this time, I created a new one from a blank flow in Power Automate, rather than from the Power Automate button at the top of the SharePoint list. Makes no sense, but I'm not going to question it.

I used the exact statement from above except for changing the column name to "AdditionalTeam". It fired off just fine.

 

I very much appreciate the time you took out of your weekend to help!

View solution in original post

13 REPLIES 13
abm
Most Valuable Professional
Most Valuable Professional

Hi @ahowes 

 

You are missing a bracket here for your expression

 

@equals(triggerBody()?['RunAutomation'],true

 

change to

 

@equals(triggerBody()?['RunAutomation'],true)

 

May I ask you what's your trigger is (SharePoint item created or modified?) then it should be

 

triggerOutputs()?['RunAutomation']

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Oops. That is only missing in my post above. It is present in my workflow and is still not working. I just got to thinking that perhaps it's because I'm using a calculated column and the value isn't present when submitted. I'm going to try to use a non-calculated column and see what happens...

I added a non-calculated field and it still does not trigger 😞

 

Ok.........I don't have anything that is:

"May I ask you what's your trigger is (SharePoint item created or modified?) then it should be

triggerOutputs()?['RunAutomation']"
Which means I probably am not outputting anything from the trigger? Where would triggerOutputs()?['RunAutomation'] go?
Thanks!
abm
Most Valuable Professional
Most Valuable Professional

Hi @ahowes 

 

I have added a compose after the trigger and looked the peek code. It did showed ' triggerOutputs()?['RunAutomation'].  I thought  triggerBody()?['RunAutomation'] should have worked.

 

You need to set this under the settings > Trigger Condition

 

Please have a look at this.

https://www.youtube.com/watch?v=j-gP-E6CCE4

 

Thanks

 

 



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

I am completely baffled. As I said, I built a new field to eliminate the potential that my calculated field (RunAutomation) was the problem. The new field "NeedAdditionalMeeting" is a manual yes/no. Per my original thought, your instruction AND the YouTube video you linked, I have it exactly as it should be (I think):

@equals(triggerBody()?['NeedAdditionalTeam'],true)

 

I also tried, since I'm grasping at straws at this point, and because I'm brand new and don't know any better:

@equals(triggerOutputs()?['RunAutomation'],true)

 

It still will not run. Everything else in the "when an item is created or modified" trigger is as it appears when first opened. I only added the statement above. This is frustrating! (But I guess if it were easy a lesser person would have my job 🙂 )

Oops. I typed wrong above. The field is "NeedAdditionalTeam". My statement matches the field, I just typed it wrong in my text above. Thanks.

abm
Most Valuable Professional
Most Valuable Professional

Hi @ahowes 

 

Thanks for your update.

 

If you happy with the response and found the solution please accept it as solution accepted. It will help others in community when they looking for solutions.

 

Thanks



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

I even just rebuilt it from scratch just to see if something was corrupted in the original.

@equals(triggerBody()?['NeedAdditionalTeam'],true) still gets no triggered workflow 😞

abm
Most Valuable Professional
Most Valuable Professional

Hi @ahowes 

 

Thanks for the update.

 

Try 

 

@equals(bool(triggerBody()?['NeedAdditionalTeam']),true)

 

 

 



Did I answer your question? Mark my post as a solution!

If you liked my response, please consider giving it a thumbs up


Proud to be a Flownaut!

Learn more from my blog
Power Automate Video Tutorials

Well, at least I got an error that time! Nothing at all happened before...

InvalidTemplate. Unable to process template language expressions for trigger 'When_an_item_is_created_or_modified' at line '1' and column '4336': 'The template language function 'bool' was invoked with a parameter that is not valid. The value cannot be converted to the target type.'.

Hi @ahowes,

 

I tried to reproduce your Flow, created a yes/no column named "NeedAdditionalTeam", and set condition in the "When an item is created or modified" trigger, and it works correctly:

Annotation 2020-05-04 150709.png

 

Annotation 2020-05-04 150722.pngAnnotation 2020-05-04 150518.png

 

And I also tried "When an item is created" trigger, it could work, too.

 

I assume the reason for the Flow not fired is caused by the column name not correct, if a column's name was modified, the column's system name wouldn't be changed. When you use it, it should be a system name, you could check its system name in the column detail page and extract it from URL:

Annotation 2020-05-04 151412.png

 

Best Regards,
Community Support Team _ Lin Tu
If this post helps, then please consider Accept it as the solution to help the other members find it more quickly.

 

@v-litu-msft @abm , thanks so much for your help! 

 

Here is what solved the issue...makes no sense to me, but it worked 🙂


My typo was in my post here, not in the workings of my workflow or the column name, so that wasn't the issue. I was using the correct column name in all of the workflows I attempted and even tried yet another new column. Still didn't work.

 

Solution:

I eliminated the column from the list. I built another new yes/no column named "AdditionalTeam". I deleted my previous workflows and started from scratch, except this time, I created a new one from a blank flow in Power Automate, rather than from the Power Automate button at the top of the SharePoint list. Makes no sense, but I'm not going to question it.

I used the exact statement from above except for changing the column name to "AdditionalTeam". It fired off just fine.

 

I very much appreciate the time you took out of your weekend to help!

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!  Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Users online (6,474)