cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Lefty
Power Participant
Power Participant

Stuck with trigger conditions

Hi

 

I had a working flow which would run when an item is created or modified and I'd added a trigger condition to ensure the flow did not run when my service account had created the item or made a change:

@not(equals(triggerBody()?['Editor']?['Email'],'emailaddress')) 

 

I now have a requirement where I do not want the flow to run when the above email is true AND when the status column in my SP list is set to partially complete. I added the following on another line but the flow triggered, which prompted me to read "Specify one or more expressions which must be true for the trigger to fire.":

 

@not(equals(triggerBody()?['Status'],'partially complete'))

 

I'm not sure how I combine both conditions and if my syntax is correct for the 2nd trigger anyways?

1 ACCEPTED SOLUTION

Accepted Solutions
Naveen_772
Resolver II
Resolver II

Hey @Lefty ,

First of all, I would suggest first adding the expressions to the compose action just after the trigger to make sure the output you're receiving from the expression is boolean or not.

 

If the output is correct then copy the expression and paste in trigger condition. Make sure to remove the curly braces from expression in trigger condition.

 

For example,

Expression in Compose:

@{and(not(equal(1,2)),equal(1,1))}

 

Expression in Trigger Condition:

@and(not(equal(1,2)),equal(1,1))

 

Regarding the combining of the expression, try using the and function.

 

In your case:

@and(not(equals(triggerBody()?['Editor']?['Email'],'emailaddress')),not(equals(triggerBody()?['Status'],'partially complete')))

 

To me, your second expression looks correct. Still, I would recommend adding it to compose to check it out.

 

If my post helps, then please consider Accept it as the solution to help the other members find it more quickly. 

View solution in original post

12 REPLIES 12
Naveen_772
Resolver II
Resolver II

Hey @Lefty ,

First of all, I would suggest first adding the expressions to the compose action just after the trigger to make sure the output you're receiving from the expression is boolean or not.

 

If the output is correct then copy the expression and paste in trigger condition. Make sure to remove the curly braces from expression in trigger condition.

 

For example,

Expression in Compose:

@{and(not(equal(1,2)),equal(1,1))}

 

Expression in Trigger Condition:

@and(not(equal(1,2)),equal(1,1))

 

Regarding the combining of the expression, try using the and function.

 

In your case:

@and(not(equals(triggerBody()?['Editor']?['Email'],'emailaddress')),not(equals(triggerBody()?['Status'],'partially complete')))

 

To me, your second expression looks correct. Still, I would recommend adding it to compose to check it out.

 

If my post helps, then please consider Accept it as the solution to help the other members find it more quickly. 

Hi @Naveen_772 

 

Thanks for your response.

I have tried your advice and done the following:

 

Created a new flow, trigger is 'when an item is created or modified' (SP)

Added a compose action and pasted in the following as an expression:

 

@not(equals(triggerBody()?['Editor']?['Email'],'email'))

 

When I click ok I get an error the expression is invalid.

 

This is odd as this expression worked fine for me under the trigger conditions, this is what I tried in the compose expression:

 

@not(equals(triggerBody()?['Editor']?['Email'],'email'))

 

{not(equals(triggerBody()?['Editor']?['Email'],'email'))}
 
@{not(equals(triggerBody()?['Editor']?['Email'],'email'))}
 
All 3 are not acceptable for flow... what am I doing wrong at the first step please?
 

 

Naveen_772
Resolver II
Resolver II

So if you are pasting it in the expression section you need to get rid of @ and curly braces.

Naveen_772_0-1643105907152.png

In your case:

not(equals(triggerBody()?['Editor']?['Email'],'email'))

Just paste the above expression in the expression section and click "OK".

 

 

Naveen_772
Resolver II
Resolver II

Hey @Lefty 

 

Please let me know if you need any further help.

 

If I am able to resolve your query then please Mark my post as a solution!😊

If you liked my response, please consider giving it a Thumbs Up👍

This will help other community member finding the solution quickly.

 

Regards

Naveen

Lefty
Power Participant
Power Participant

Thanks so much for explaining although I have followed all the steps something is wrong please see my trigger conditions below. I thought it was working until I submitted a new SP item and the WF should have triggered as both conditions were false in the scenario, i.e. my Service account was not the user and the status was not partially complete:

 

@And(not(equals(triggerBody()?['Editor']?['Email'],'ServiceAccountEmail')),not(equals(triggerBody()?['Status']?['Value'],'partially complete')))

 

But the WF has not triggered.

Lefty
Power Participant
Power Participant

@Naveen_772 

Ignore the last message, it triggered after a long time!

I am just testing a few more scenarios, but so far so good. I will let you know shortly, or will mark as answered

Thanks

Lefty
Power Participant
Power Participant

@Naveen_772 

 

Sorry, need help with 1 more please, how do i extend the condition to include 2 different status values. I.e. if the status is 'partially complete' or if status is 'nearly complete'. I tried this but the expression is wrong:

 

and(not(equals(triggerBody()?['Editor']?['Email'],'ServiceAccountEmail')), equals(triggerBody()?['Status']?['Value'],'partially complete') Or equals(triggerBody()?['Status']?['Value'],'nearly complete')))

Naveen_772
Resolver II
Resolver II

@Lefty ,

 

You are almost there just a quick change is needed. Or is a function, not an operator. You need to pass the parameters to it.

 

For example:

@and(not(equals(1,2)),or(equals(1,2),equals(1,1)))

 

In your case:

@and(not(equals(triggerBody()?['Editor']?['Email'],'ServiceAccountEmail')), or(equals(triggerBody()?['Status']?['Value'],'partially complete'), equals(triggerBody()?['Status']?['Value'],'nearly complete')))

 

I hope this helps.

Lefty
Power Participant
Power Participant

Thanks the expression is correct, but after all this, the workflow is still not doing what I need it to. Even though I have set the trigger condition to the above recommendation. the WF still triggers and changes the items, when it shouldnt as the 2 conditions were not met.

Please correct me if I am wrong in my understanding of what this condition means:

@And(not(equals(triggerBody()?['Editor']?['Email'],'ServiceAccountEmail')), or(equals(triggerBody()?['Status']?['Value'],'partially complete'), equals(triggerBody()?['Status']?['Value'],'nearly complete')))

 

I am asking it to not trigger if my serviceaccount email is equal to the email and if the status is equal to either partially complete or nearly complete?

 

As the the test I have just run, the service account was not the account being used, and the status was not either partially complete or nearly complete, yet the WF still ran.... any ideas?

 

Thanks

 

 

Naveen_772
Resolver II
Resolver II

 

@Lefty I think this will be the last piece of the puzzle.

 

As you mentioned you don't want to trigger the flow if the status is either "Nearly Complete" or "Partially Complete". But in the expression, we are only checking for the true case. You need to add the not function.

 

Expression: 

@And(not(equals(triggerBody()?['Editor']?['Email'],'ServiceAccountEmail')), or(not(equals(triggerBody()?['Status']?['Value'],'partially complete')), not(equals(triggerBody()?['Status']?['Value'],'nearly complete'))))

 

True case for the expression:

Email- Anything, except ServiceAccountEmail

Status- Anything other than partially complete or nearly complete

Hey @Naveen_772 

Thanks

but I wanted the trigger to be triggered when its nearly complete or partially complete, hence why i removed the not from the expression, and I genuinely thought that was it - but oddly it still triggered, so I am missing something

Lefty
Power Participant
Power Participant

@Naveen_772 

Let me test some things out, i think the issue was a typo on my part

Helpful resources

Announcements

Exclusive LIVE Community Event: Power Apps Copilot Coffee Chat with Copilot Studio Product Team

It's time for the SECOND Power Apps Copilot Coffee Chat featuring the Copilot Studio product team, which will be held LIVE on April 3, 2024 at 9:30 AM Pacific Daylight Time (PDT).     This is an incredible opportunity to connect with members of the Copilot Studio product team and ask them anything about Copilot Studio. We'll share our special guests with you shortly--but we want to encourage to mark your calendars now because you will not want to miss the conversation.   This live event will give you the unique opportunity to learn more about Copilot Studio plans, where we’ll focus, and get insight into upcoming features. We’re looking forward to hearing from the community, so bring your questions!   TO GET ACCESS TO THIS EXCLUSIVE AMA: Kudo this post to reserve your spot! Reserve your spot now by kudoing this post.  Reservations will be prioritized on when your kudo for the post comes through, so don't wait! Click that "kudo button" today.   Invitations will be sent on April 2nd.Users posting Kudos after April 2nd at 9AM PDT may not receive an invitation but will be able to view the session online after conclusion of the event. Give your "kudo" today and mark your calendars for April 3, 2024 at 9:30 AM PDT and join us for an engaging and informative session!

Tuesday Tip: Unlocking Community Achievements and Earning Badges

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!     THIS WEEK'S TIP: Unlocking Achievements and Earning BadgesAcross the Communities, you'll see badges on users profile that recognize and reward their engagement and contributions. These badges each signify a different achievement--and all of those achievements are available to any Community member! If you're a seasoned pro or just getting started, you too can earn badges for the great work you do. Check out some details on Community badges below--and find out more in the detailed link at the end of the article!       A Diverse Range of Badges to Collect The badges you can earn in the Community cover a wide array of activities, including: Kudos Received: Acknowledges the number of times a user’s post has been appreciated with a “Kudo.”Kudos Given: Highlights the user’s generosity in recognizing others’ contributions.Topics Created: Tracks the number of discussions initiated by a user.Solutions Provided: Celebrates the instances where a user’s response is marked as the correct solution.Reply: Counts the number of times a user has engaged with community discussions.Blog Contributor: Honors those who contribute valuable content and are invited to write for the community blog.       A Community Evolving Together Badges are not only a great way to recognize outstanding contributions of our amazing Community members--they are also a way to continue fostering a collaborative and supportive environment. As you continue to share your knowledge and assist each other these badges serve as a visual representation of your valuable contributions.   Find out more about badges in these Community Support pages in each Community: All About Community Badges - Power Apps CommunityAll About Community Badges - Power Automate CommunityAll About Community Badges - Copilot Studio CommunityAll About Community Badges - Power Pages Community

Tuesday Tips: Powering Up Your Community Profile

TUESDAY TIPS are our way of communicating helpful things we've learned or shared that have helped members of the Community. Whether you're just getting started or you're a seasoned pro, Tuesday Tips will help you know where to go, what to look for, and navigate your way through the ever-growing--and ever-changing--world of the Power Platform Community! We cover basics about the Community, provide a few "insider tips" to make your experience even better, and share best practices gleaned from our most active community members and Super Users.   With so many new Community members joining us each week, we'll also review a few of our "best practices" so you know just "how" the Community works, so make sure to watch the News & Announcements each week for the latest and greatest Tuesday Tips!   This Week's Tip: Power Up Your Profile!  🚀 It's where every Community member gets their start, and it's essential that you keep it updated! Your Community User Profile is how you're able to get messages, post solutions, ask questions--and as you rank up, it's where your badges will appear and how you'll be known when you start blogging in the Community Blog. Your Community User Profile is how the Community knows you--so it's essential that it works the way you need it to! From changing your username to updating contact information, this Knowledge Base Article is your best resource for powering up your profile.     Password Puzzles? No Problem! Find out how to sync your Azure AD password with your community account, ensuring a seamless sign-in. No separate passwords to remember! Job Jumps & Email Swaps Changed jobs? Got a new email? Fear not! You'll find out how to link your shiny new email to your existing community account, keeping your contributions and connections intact. Username Uncertainties Unraveled Picking the perfect username is crucial--and sometimes the original choice you signed up with doesn't fit as well as you may have thought. There's a quick way to request an update here--but remember, your username is your community identity, so choose wisely. "Need Admin Approval" Warning Window? If you see this error message while using the community, don't worry. A simple process will help you get where you need to go. If you still need assistance, find out how to contact your Community Support team. Whatever you're looking for, when it comes to your profile, the Community Account Support Knowledge Base article is your treasure trove of tips as you navigate the nuances of your Community Profile. It’s the ultimate resource for keeping your digital identity in tip-top shape while engaging with the Power Platform Community. So, dive in and power up your profile today!  💪🚀   Community Account Support | Power Apps Community Account Support | Power AutomateCommunity Account Support | Copilot Studio  Community Account Support | Power Pages

Super User of the Month | Chris Piasecki

In our 2nd installment of this new ongoing feature in the Community, we're thrilled to announce that Chris Piasecki is our Super User of the Month for March 2024. If you've been in the Community for a while, we're sure you've seen a comment or marked one of Chris' helpful tips as a solution--he's been a Super User for SEVEN consecutive seasons!   Since authoring his first reply in April 2020 to his most recent achievement organizing the Canadian Power Platform Summit this month, Chris has helped countless Community members with his insights and expertise. In addition to being a Super User, Chris is also a User Group leader, Microsoft MVP, and a featured speaker at the Microsoft Power Platform Conference. His contributions to the new SUIT program, along with his joyous personality and willingness to jump in and help so many members has made Chris a fixture in the Power Platform Community.   When Chris isn't authoring solutions or organizing events, he's actively leading Piasecki Consulting, specializing in solution architecture, integration, DevOps, and more--helping clients discover how to strategize and implement Microsoft's technology platforms. We are grateful for Chris' insightful help in the Community and look forward to even more amazing milestones as he continues to assist so many with his great tips, solutions--always with a smile and a great sense of humor.You can find Chris in the Community and on LinkedIn. Thanks for being such a SUPER user, Chris! 💪 🌠  

Find Out What Makes Super Users So Super

We know many of you visit the Power Platform Communities to ask questions and receive answers. But do you know that many of our best answers and solutions come from Community members who are super active, helping anyone who needs a little help getting unstuck with Business Applications products? We call these dedicated Community members Super Users because they are the real heroes in the Community, willing to jump in whenever they can to help! Maybe you've encountered them yourself and they've solved some of your biggest questions. Have you ever wondered, "Why?"We interviewed several of our Super Users to understand what drives them to help in the Community--and discover the difference it has made in their lives as well! Take a look in our gallery today: What Motivates a Super User? - Power Platform Community (microsoft.com)

March User Group Update: New Groups and Upcoming Events!

  Welcome to this month’s celebration of our Community User Groups and exciting User Group events. We’re thrilled to introduce some brand-new user groups that have recently joined our vibrant community. Plus, we’ve got a lineup of engaging events you won’t want to miss. Let’s jump right in: New User Groups   Sacramento Power Platform GroupANZ Power Platform COE User GroupPower Platform MongoliaPower Platform User Group OmanPower Platform User Group Delta StateMid Michigan Power Platform Upcoming Events  DUG4MFG - Quarterly Meetup - Microsoft Demand PlanningDate: 19 Mar 2024 | 10:30 AM to 12:30 PM Central America Standard TimeDescription: Dive into the world of manufacturing with a focus on Demand Planning. Learn from industry experts and share your insights. Dynamics User Group HoustonDate: 07 Mar 2024 | 11:00 AM to 01:00 PM Central America Standard TimeDescription: Houston, get ready for an immersive session on Dynamics 365 and the Power Platform. Connect with fellow professionals and expand your knowledge. Reading Dynamics 365 & Power Platform User Group (Q1)Date: 05 Mar 2024 | 06:00 PM to 09:00 PM GMT Standard TimeDescription: Join our virtual meetup for insightful discussions, demos, and community updates. Let’s kick off Q1 with a bang! Leaders, Create Your Events!  Leaders of existing User Groups, don’t forget to create your events within the Community platform. By doing so, you’ll enable us to share them in future posts and newsletters. Let’s spread the word and make these gatherings even more impactful! Stay tuned for more updates, inspiring stories, and collaborative opportunities from and for our Community User Groups.   P.S. Have an event or success story to share? Reach out to us – we’d love to feature you!

Users online (5,012)